diff --git a/tools/maint/patch_and_build_hansemesh_fw.sh b/tools/maint/patch_and_build_hansemesh_fw.sh
new file mode 100755
index 00000000..8a80a8f8
--- /dev/null
+++ b/tools/maint/patch_and_build_hansemesh_fw.sh
@@ -0,0 +1,60 @@
+#!/bin/bash  # Note: switched to bash for process substitution support
+
+export PATH="$HOME/.platformio/penv/bin:$PATH"
+
+LOGFILE="$PWD/meshcore-evo-fw.log"
+FIRMWARE_VERSION="v1.11_evo"
+FIRMWARE_BUILD_DATE=$(date '+%d-%b-%Y')
+
+collect_bin_files(){
+    DEST_DIR="./firmwares"
+    mkdir -p "$DEST_DIR"
+    BUILD_DIR=".pio/build"
+
+    if [ ! -d "$BUILD_DIR" ]; then
+        echo "Error: $BUILD_DIR not found. Did you run the build process?"
+        exit 1
+    fi
+
+    echo "Copying firmware files to $DEST_DIR..."
+
+    for target_path in "$BUILD_DIR"/*/; do
+        echo $target_path
+        target_name=$(basename "$target_path")
+    #    if ls "$target_path"*.bin >/dev/null 2>&1; then
+            for bin_file in "$target_path"*firmware*.{uf2,bin,zip}; do
+                filename=$(basename "$bin_file")
+                new_filename="${target_name}_${FIRMWARE_VERSION}_${FIRMWARE_BUILD_DATE}_${filename}"
+                cp "$bin_file" "$DEST_DIR/$new_filename"
+                echo "Done: $new_filename"
+            done
+    #    fi
+    done
+}
+
+# Everything after this line goes to BOTH console and logfile
+exec > >(tee -a "$LOGFILE") 2>&1
+
+echo "-------------------- Build start ----------------"
+date
+echo "-------------------------------------------------"
+
+# apply patches
+# ./tools/maint/apply_patches.sh 1199 1338 1297
+
+# build all repeater firmwares, the will be in .out
+# FIRMWARE_VERSION="v1.11_hansemesh_special" ./build.sh build-repeater-firmwares
+
+# build single firmwares
+FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware ProMicro_repeater
+FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware RAK_4631_repeater
+FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware heltec_v4_repeater
+FIRMWARE_VERSION=$FIRMWARE_VERSION FIRMWARE_BUILD_DATE=$FIRMWARE_BUILD_DATE ./build.sh build-firmware Heltec_v3_repeater
+collect_bin_files
+
+
+echo "-------------------- Build end ------------------"
+date
+echo "-------------------------------------------------"
+
+#grep -E " SUCCESS | FAILED " hansemesh_fw.log
\ No newline at end of file