* new targets: RAK_4631_chat_alice, and _bob

examples/simple_repeater/main.cpp

@@ -9,7 +9,6 @@
 
 #define RADIOLIB_STATIC_ONLY 1
 #include <RadioLib.h>
-#include <helpers/CustomSX1262Wrapper.h>
 #include <helpers/ArduinoHelpers.h>
 #include <helpers/StaticPoolPacketManager.h>
 #include <helpers/SimpleMeshTables.h>
@@ -30,7 +29,7 @@
   #define LORA_CR      5
 #endif
 #ifndef LORA_TX_POWER
-  #defne LORA_TX_POWER  20
+  #define LORA_TX_POWER  20
 #endif
 
 #ifndef ADVERT_NAME
@@ -49,6 +48,7 @@
 
 #if defined(HELTEC_LORA_V3)
   #include <helpers/HeltecV3Board.h>
+  #include <helpers/CustomSX1262Wrapper.h>
   static HeltecV3Board board;
 #elif defined(ARDUINO_XIAO_ESP32C3)
   #include <helpers/XiaoC3Board.h>

examples/simple_secure_chat/main.cpp

@@ -1,6 +1,5 @@
 #include <Arduino.h>   // needed for PlatformIO
 #include <Mesh.h>
-#include <SPIFFS.h>
 
 #define RADIOLIB_STATIC_ONLY 1
 #include <RadioLib.h>
@@ -23,6 +22,9 @@
 #ifndef LORA_CR
   #define LORA_CR      5
 #endif
+#ifndef LORA_TX_POWER
+  #define LORA_TX_POWER  20
+#endif
 
 //#define RUN_AS_ALICE    true
 
@@ -38,7 +40,12 @@
 
 #ifdef HELTEC_LORA_V3
   #include <helpers/HeltecV3Board.h>
+  #include <helpers/CustomSX1262Wrapper.h>
   static HeltecV3Board board;
+#elif defined(RAK_4631)
+  #include <helpers/RAK4631Board.h>
+  #include <helpers/CustomSX1262Wrapper.h>
+  static RAK4631Board board;
 #else
   #error "need to provide a 'board' object"
 #endif
@@ -233,7 +240,7 @@ public:
   uint32_t expected_ack_crc;
   unsigned long last_msg_sent;
 
-  MyMesh(mesh::Radio& radio, mesh::RNG& rng, mesh::RTCClock& rtc, SimpleMeshTables& tables)
+  MyMesh(RadioLibWrapper& radio, mesh::RNG& rng, mesh::RTCClock& rtc, SimpleMeshTables& tables)
      : mesh::Mesh(radio, *new ArduinoMillis(), rng, rtc, *new StaticPoolPacketManager(16), tables)
   {
     num_contacts = 0;
@@ -272,11 +279,17 @@ public:
   }
 };
 
+#if defined(NRF52_PLATFORM)
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+#elif defined(P_LORA_SCLK)
 SPIClass spi;
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
 StdRNG fast_rng;
 SimpleMeshTables tables;
-SX1262 radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+MyMesh the_mesh(*new WRAPPER_CLASS(radio, board), fast_rng, *new VolatileRTCClock(), tables);
-MyMesh the_mesh(*new RadioLibWrapper(radio, board), fast_rng, *new VolatileRTCClock(), tables);
 
 void halt() {
   while (1) ;
@@ -294,12 +307,13 @@ void setup() {
   float tcxo = 1.6f;
 #endif
 
-#if defined(P_LORA_SCLK)
+#if defined(NRF52_PLATFORM)
+  SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI);
+  SPI.begin();
+#elif defined(P_LORA_SCLK)
   spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, 22, 8, tcxo);
-#else
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, 22, 8, tcxo);
 #endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
   if (status != RADIOLIB_ERR_NONE) {
     Serial.print("ERROR: radio init failed: ");
     Serial.println(status);

platformio.ini

@@ -43,6 +43,8 @@ board = esp32-s3-devkitc-1
 build_flags =
   ${esp32_base.build_flags} 
   -D HELTEC_LORA_V3
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
   -D SX126X_DIO2_AS_RF_SWITCH=true
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
@@ -61,8 +63,6 @@ build_src_filter = ${Heltec_lora32_v3.build_src_filter} +<../examples/ping_clien
 extends = Heltec_lora32_v3
 build_flags =
   ${Heltec_lora32_v3.build_flags} 
-  -D RADIO_CLASS=CustomSX1262
-  -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D ADVERT_NAME="\"Heltec Repeater\""
   -D ADVERT_LAT=-37.0
   -D ADVERT_LON=145.0
@@ -197,19 +197,37 @@ board = wiscore_rak4631
 board_check = true
 build_flags = ${nrf52840_base.build_flags}
   -D RAK_4631
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_CURRENT_LIMIT=130
 
 [env:RAK_4631_Repeater]
 extends = rak4631
 build_src_filter = ${rak4631.build_src_filter} +<../examples/simple_repeater/main.cpp>
 build_flags =
   ${rak4631.build_flags} 
-  -D RADIO_CLASS=CustomSX1262
-  -D WRAPPER_CLASS=CustomSX1262Wrapper
-  -D LORA_TX_POWER=22
-  -D SX126X_CURRENT_LIMIT=130
   -D ADVERT_NAME="\"RAK4631 Repeater\""
   -D ADVERT_LAT=-37.0
   -D ADVERT_LON=145.0
   -D ADMIN_PASSWORD="\"password\""
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
+
+[env:RAK_4631_chat_alice]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags} 
+  -D RUN_AS_ALICE=true
+  -D MESH_PACKET_LOGGING=1
+  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter} +<../examples/simple_secure_chat/main.cpp>
+
+[env:RAK_4631_chat_bob]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags} 
+  -D RUN_AS_ALICE=false
+  -D MESH_PACKET_LOGGING=1
+  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter} +<../examples/simple_secure_chat/main.cpp>