From here, reference repeater and room server command line commands on MeshCore github wiki here: - https://github.com/meshcore-dev/MeshCore/wiki/Repeater-&-Room-Server-CLI-Reference
A: Yes. See the following:
-A: Yes. Some of them are listed below.
+Some resources that by themselves give overviews about MeshCore related projects:
+A meta website/ git-repository collecting many projects related to MeshCore, grouped by type. See
+https://github.com/samuk/awesome-meshcore.
A Python script to send meshcore debug and packet capture data to MQTT for analysis. Cisien's version is a fork of Andrew-a-g's and is being used to to collect data for https://map.w0z.is/messages and https://analyzer.letsmesh.net/ https://github.com/Cisien/meshcoretomqtt https://github.com/Andrew-a-g/meshcoretomqtt
-A custom Home Assistant integration for MeshCore mesh radio nodes. It allows you to monitor and control MeshCore nodes via USB, BLE, or TCP connections. https://github.com/awolden/meshcore-ha
-Bindings to access your MeshCore companion radio nodes in python. https://github.com/fdlamotte/meshcore_py
-CLI interface to MeshCore companion radio over BLE, TCP, or serial. Uses Python MeshCore above. https://github.com/fdlamotte/meshcore-cli
-A JavaScript library for interacting with a MeshCore device running the companion radio firmware https://github.com/liamcottle/meshcore.js
-pyMC_Core is a Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI. https://github.com/rightup/pyMC_core
-A TypeScript library for decoding MeshCore mesh networking packets with full cryptographic support. Uses WebAssembly (WASM) for Ed25519 key derivation through the orlp/ed25519 library. It powers the MeshCore Packet Analyzer. https://github.com/michaelhart/meshcore-decoder
-meshcore-pi is another Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI or GPIO. https://github.com/brianwiddas/meshcore-pi
-pyMC_Repeater is a repeater daemon in Python built on top of the pymc_core library.
https://github.com/rightup/pyMC_Repeater
A Node.js software that will upload every repeater or room server to map.meshcore.dev when a connected companion hears new advert.
+https://github.com/recrof/map.meshcore.dev-uploader
Open Source companion app for Android, iOS, GNU/Linux (and maybe other Unixes), Windows, macOS, chromium-based browsers.
+https://github.com/zjs81/meshcore-open
Standalone client firmware for the "M5Stack Cardputer ADV" with the "M5Stack Cap LoRa-1262" module.
+There are two variants:
+Multi-protocol mesh firmware for ESP32-S3 LoRa devices (MeshCore, Meshtastic, RNode/KISS (Reticulum)). Protocol is auto-detected from the first bytes over serial or BLE.
+https://github.com/STCisGOOD/lunarcore
(Soon to be) Open Source companion firmware for LilyGO T-Deck (Plus) and Seeed Studio SenseCap Indicator (TFT / D1Pro), that can be used both standalone and together with a companion app.
+https://github.com/dabeani/meshcore
Companion firmware for LilyGo T-Deck Pro that allows standalone operation and connection to a companion app via Bluetooth Low Energy (BLE).
+https://github.com/pelgraine/Meck
Companion firmware for Seeed Studio Wio Tracker L1 Pro with specific UI adjustments that can be used standalone.
+https://github.com/sosprz/Meshcore-Wio-Tracker-L1-Pro
(None yet listed here. See overview ressources.)
A: Yes, the same iOS and Android client is also available for Windows and Intel Mac (sorry, not available for ARM-based Mac yet). You can find them together with the Android APK here: https://files.liamcottle.net/MeshCore
diff --git a/index.html b/index.html index b0994c14..c1cba2be 100644 --- a/index.html +++ b/index.html @@ -21,7 +21,7 @@ - + diff --git a/kiss_modem_protocol/index.html b/kiss_modem_protocol/index.html index 2b33278e..3e2286d9 100644 --- a/kiss_modem_protocol/index.html +++ b/kiss_modem_protocol/index.html @@ -23,7 +23,7 @@ - + diff --git a/nrf52_power_management/index.html b/nrf52_power_management/index.html index 36a13c88..81011739 100644 --- a/nrf52_power_management/index.html +++ b/nrf52_power_management/index.html @@ -23,7 +23,7 @@ - + diff --git a/packet_format/index.html b/packet_format/index.html index 4af5ac93..2873e852 100644 --- a/packet_format/index.html +++ b/packet_format/index.html @@ -23,7 +23,7 @@ - + diff --git a/payloads/index.html b/payloads/index.html index c958c78e..21248ee7 100644 --- a/payloads/index.html +++ b/payloads/index.html @@ -23,7 +23,7 @@ - + diff --git a/qr_codes/index.html b/qr_codes/index.html index c0c914ef..9086a2a4 100644 --- a/qr_codes/index.html +++ b/qr_codes/index.html @@ -23,7 +23,7 @@ - + diff --git a/search/search_index.json b/search/search_index.json index 34e08df5..1184ad78 100644 --- a/search/search_index.json +++ b/search/search_index.json @@ -1 +1 @@ -{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"],"fields":{"title":{"boost":1000.0},"text":{"boost":1.0},"tags":{"boost":1000000.0}}},"docs":[{"location":"","title":"Introduction","text":"Welcome to the MeshCore documentation.
Below are a few quick start guides.
If you find a mistake in any of our documentation, or find something is missing, please feel free to open a pull request for us to review.
This document provides an overview of CLI commands that can be sent to MeshCore Repeaters, Room Servers and Sensors.
"},{"location":"cli_commands/#navigation","title":"Navigation","text":"Usage: - reboot
Usage: - clkreboot
Usage: - clock sync
Usage: - clock
Usage: - time <epoch_seconds>
Parameters: - epoc_seconds: Unix epoc time
Usage: - advert
Usage: - start ota
Usage: - erase
Serial Only: Yes
Warning: This is destructive!
"},{"location":"cli_commands/#neighbors-repeater-only","title":"Neighbors (Repeater Only)","text":""},{"location":"cli_commands/#list-nearby-neighbors","title":"List nearby neighbors","text":"Usage: - neighbors
Note: The output of this command is limited to the 8 most recent adverts.
Note: Each line is encoded as {pubkey-prefix}:{timestamp}:{snr*4}
Usage: - neighbor.remove <pubkey_prefix>
Parameters: - pubkey_prefix: The public key of the node to remove from the neighbors list
Usage: clear stats
Usage: - stats-core
Serial Only: Yes
"},{"location":"cli_commands/#radio-stats-noise-floor-last-rssisnr-airtime-receive-errors","title":"Radio Stats - Noise floor, Last RSSI/SNR, Airtime, Receive errors","text":"Usage: stats-radio
Serial Only: Yes
"},{"location":"cli_commands/#packet-stats-packet-counters-received-sent","title":"Packet stats - Packet counters: Received, Sent","text":"Usage: stats-packets
Serial Only: Yes
"},{"location":"cli_commands/#logging","title":"Logging","text":""},{"location":"cli_commands/#begin-capture-of-rx-log-to-node-storage","title":"Begin capture of rx log to node storage","text":"Usage: log start
Usage: log stop
Usage: log erase
Usage: log
Serial Only: Yes
"},{"location":"cli_commands/#info","title":"Info","text":""},{"location":"cli_commands/#get-the-version","title":"Get the Version","text":"Usage: ver
Usage: board
Usage: - get radio - set radio <freq>,<bw>,<sf>,<cr>
Parameters: - freq: Frequency in MHz - bw: Bandwidth in kHz - sf: Spreading factor (5-12) - cr: Coding rate (5-8)
Set by build flag: LORA_FREQ, LORA_BW, LORA_SF, LORA_CR
Default: 869.525,250,11,5
Note: Requires reboot to apply
"},{"location":"cli_commands/#view-or-change-this-nodes-transmit-power","title":"View or change this node's transmit power","text":"Usage: - get tx - set tx <dbm>
Parameters: - dbm: Power level in dBm (1-22)
Set by build flag: LORA_TX_POWER
Default: Varies by board
Notes: This setting only controls the power level of the LoRa chip. Some nodes have an additional power amplifier stage which increases the total output. Referr to the node's manual for the correct setting to use. Setting a value too high may violate the laws in your country.
"},{"location":"cli_commands/#change-the-radio-parameters-for-a-set-duration","title":"Change the radio parameters for a set duration","text":"Usage: - tempradio <freq>,<bw>,<sf>,<cr>,<timeout_mins>
Parameters: - freq: Frequency in MHz (300-2500) - bw: Bandwidth in kHz (7.8-500) - sf: Spreading factor (5-12) - cr: Coding rate (5-8) - timeout_mins: Duration in minutes (must be > 0)
Note: This is not saved to preferences and will clear on reboot
"},{"location":"cli_commands/#view-or-change-this-nodes-frequency","title":"View or change this node's frequency","text":"Usage: - get freq - set freq <frequency>
Parameters: - frequency: Frequency in MHz
Default: 869.525
Note: Requires reboot to apply
"},{"location":"cli_commands/#system","title":"System","text":""},{"location":"cli_commands/#view-or-change-this-nodes-name","title":"View or change this node's name","text":"Usage: - get name - set name <name>
Parameters: - name: Node name
Set by build flag: ADVERT_NAME
Default: Varies by board
Note: Max length varies. If a location is set, the max length is 24 bytes; 32 otherwise. Emoji and unicode characters may take more than one byte.
"},{"location":"cli_commands/#view-or-change-this-nodes-latitude","title":"View or change this node's latitude","text":"Usage: - get lat - set lat <degrees>
Set by build flag: ADVERT_LAT
Default: 0
Parameters: - degrees: Latitude in degrees
Usage: - get lon - set lon <degrees>
Set by build flag: ADVERT_LON
Default: 0
Parameters: - degrees: Longitude in degrees
Usage: - get prv.key - set prv.key <private_key>
Parameters: - private_key: Private key in hex format (64 hex characters)
Serial Only: - get prv.key: Yes - set prv.key: No
Note: Requires reboot to take effect after setting
"},{"location":"cli_commands/#change-this-nodes-admin-password","title":"Change this node's admin password","text":"Usage: - password <password>
Parameters: - password: Admin password
Set by build flag: ADMIN_PASSWORD
Default: password
Note: Echoed back for confirmation
Note: Any node using this password will be added to the admin ACL list.
"},{"location":"cli_commands/#view-or-change-this-nodes-guest-password","title":"View or change this node's guest password","text":"Usage: - get guest.password - set guest.password <password>
Parameters: - password: Guest password
Set by build flag: ROOM_PASSWORD (Room Server only)
Default: <blank>
Usage: - get owner.info - set owner.info <text>
Parameters: - text: Owner information text
Default: <blank>
Note: | characters are translated to newlines
Note: Requires firmware 1.12.+
"},{"location":"cli_commands/#fine-tune-the-battery-reading","title":"Fine-tune the battery reading","text":"Usage: - get adc.multiplier - set adc.multiplier <value>
Parameters: - value: ADC multiplier (0.0-10.0)
Default: 0.0 (value defined by board)
Note: Returns \"Error: unsupported by this board\" if hardware doesn't support it
"},{"location":"cli_commands/#view-or-change-this-nodes-power-saving-flag-repeater-only","title":"View or change this node's power saving flag (Repeater Only)","text":"Usage: - powersaving <state> - powersaving
Parameters: - state: on|off
Default: on
Note: When enabled, device enters sleep mode between radio transmissions
"},{"location":"cli_commands/#routing","title":"Routing","text":""},{"location":"cli_commands/#view-or-change-this-nodes-repeat-flag","title":"View or change this node's repeat flag","text":"Usage: - get repeat - set repeat <state>
Parameters: - state: on|off
Default: on
Usage: - get txdelay - set txdelay <value>
Parameters: - value: Transmit delay factor (0-2)
Default: 0.5
Usage: - get direct.txdelay - set direct.txdelay <value>
Parameters: - value: Direct transmit delay factor (0-2)
Default: 0.2
Usage: - get rxdelay - set rxdelay <value>
Parameters: - value: Receive delay base (0-20)
Default: 0.0
Usage: - get af - set af <value>
Parameters: - value: Airtime factor (0-9)
Default: 1.0
Usage: - get int.thresh - set int.thresh <value>
Parameters: - value: Interference threshold value
Default: 0.0
Usage: - get agc.reset.interval - set agc.reset.interval <value>
Parameters: - value: Interval in seconds rounded down to a multiple of 4 (17 becomes 16)
Default: 0.0
Usage: - get multi.acks - set multi.acks <state>
Parameters: - state: 0 (disable) or 1 (enable)
Default: 0
Usage: - get flood.advert.interval - set flood.advert.interval <hours>
Parameters: - hours: Interval in hours (3-168)
Default: 12 (Repeater) - 0 (Sensor)
Usage: - get advert.interval - set advert.interval <minutes>
Parameters: - minutes: Interval in minutes rounded down to the nearest multiple of 2 (61 becomes 60) (60-240)
Default: 0
Usage: - get flood.max - set flood.max <value>
Parameters: - value: Maximum flood hop count (0-64)
Default: 64
Usage: - setperm <pubkey> <permissions>
Parameters: - pubkey: Companion public key - permissions: - 0: Guest - 1: Read-only - 2: Read-write - 3: Admin
Note: Removes the entry when permissions is omitted
Usage: - get acl
Serial Only: Yes
"},{"location":"cli_commands/#view-or-change-this-room-servers-read-only-flag","title":"View or change this room server's 'read-only' flag","text":"Usage: - get allow.read.only - set allow.read.only <state>
Parameters: - state: on (enable) or off (disable)
Default: off
Usage: - region load - region load <name> [flood_flag]
Parameters: - name: A name of a region. * represents the wildcard region
Note: flood_flag: Optional F to allow flooding
Note: Indentation creates parent-child relationships (max 8 levels)
Note: region load with an empty name will not work remotely (it's interactive)
Usage: - region save
Usage: - region allowf <name>
Parameters: - name: Region name (or * for wildcard)
Note: Setting on wildcard * allows packets without region transport codes
Usage: - region denyf <name>
Parameters: - name: Region name (or * for wildcard)
Note: Setting on wildcard * drops packets without region transport codes
Usage: - region get <name>
Parameters: - name: Region name (or * for wildcard)
Usage: - region home - region home <name>
Parameters: - name: Region name
Usage: - region put <name> [parent_name]
Parameters: - name: Region name - parent_name: Parent region name (optional, defaults to wildcard)
Usage: - region remove <name>
Parameters: - name: Region name
Note: Must remove all child regions before the region can be removed
"},{"location":"cli_commands/#view-all-regions","title":"View all regions","text":"Usage: - region list <filter>
Serial Only: Yes
Parameters: - filter: allowed|denied
Note: Requires firmware 1.12.+
"},{"location":"cli_commands/#dump-all-defined-regions-and-flood-permissions","title":"Dump all defined regions and flood permissions","text":"Usage: - region
Serial Only: For firmware older than 1.12.0
"},{"location":"cli_commands/#region-examples","title":"Region Examples","text":"Example 1: Using F Flag with Named Public Region
region load\n#Europe F\n<blank line to end region load>\nregion save\nExplanation: - Creates a region named #Europe with flooding enabled - Packets from this region will be flooded to other nodes
Example 2: Using Wildcard with F Flag
region load \n* F\n<blank line to end region load>\nregion save\nExplanation: - Creates a wildcard region * with flooding enabled - Enables flooding for all regions automatically - Applies only to packets without transport codes
Example 3: Using Wildcard Without F Flag
region load \n*\n<blank line to end region load>\nregion save\nExplanation: - Creates a wildcard region * without flooding - This region exists but doesn't affect packet distribution - Used as a default/empty region
Example 4: Nested Public Region with F Flag
region load \n#Europe F\n #UK\n #London\n #Manchester\n #France\n #Paris\n #Lyon\n<blank line to end region load>\nregion save\nExplanation: - Creates #Europe region with flooding enabled - Adds nested child regions (#UK, #France) - All nested regions inherit the flooding flag from parent
Example 5: Wildcard with Nested Public Regions
region load \n* F\n #NorthAmerica\n #USA\n #NewYork\n #California\n #Canada\n #Ontario\n #Quebec\n<blank line to end region load>\nregion save\nExplanation: - Creates wildcard region * with flooding enabled - Adds nested #NorthAmerica hierarchy - Enables flooding for all child regions automatically - Useful for global networks with specific regional rules
Usage: - gps - gps <state>
Parameters: - state: on|off
Default: off
Note: Output format: {status}, {fix}, {sat count} (when enabled)
Usage: - gps sync
Usage: - gps setloc
Usage: - gps advert - gps advert <policy>
Parameters: - policy: none|shared|prefs - none: don't include location in adverts - share: share gps location (from SensorManager) - prefs: location stored in node's lat and lon settings
Default: prefs
Usage: sensor list [start]
Parameters: - start: Optional starting index (defaults to 0)
Note: Output format: <var_name>=<value>\\n
Usage: - sensor get <key> - sensor set <key> <value>
Parameters: - key: Sensor setting name - value: The value to set the sensor to
Usage: - get bridge.enabled - set bridge.enabled <state>
Parameters: - state: on|off
Default: off
Usage: - get bridge.source
Usage: - get bridge.delay - set bridge.delay <ms>
Parameters: - ms: Delay in milliseconds (0-10000)
Default: 500
Usage: - get bridge.source - set bridge.source <source>
Parameters: - source: - rx: bridges received packets - tx: bridges transmitted packets
Default: tx
Usage: - get bridge.baud - set bridge.baud <rate>
Parameters: - rate: Baud rate (9600, 19200, 38400, 57600, or 115200)
Default: 115200
Usage: - get bridge.channel - set bridge.channel <channel>
Parameters: - channel: Channel number (1-14)
Usage: - get bridge.secret - set bridge.secret <secret>
Parameters: - secret: 16-character encryption secret
Default: Varies by board
"},{"location":"companion_protocol/","title":"Companion Protocol","text":"NOTE: This document is still in development. Some information may be inaccurate.
This document provides a comprehensive guide for communicating with MeshCore devices over Bluetooth Low Energy (BLE).
It is platform-agnostic and can be used for Android, iOS, Python, JavaScript, or any other platform that supports BLE.
"},{"location":"companion_protocol/#official-libraries","title":"Official Libraries","text":"Please see the following repos for existing MeshCore Companion Protocol libraries.
All secrets, hashes, and cryptographic values shown in this guide are example values only.
MeshCore Companion devices expose a BLE service with the following UUIDs:
6E400001-B5A3-F393-E0A9-E50E24DCCA9E6E400002-B5A3-F393-E0A9-E50E24DCCA9E6E400003-B5A3-F393-E0A9-E50E24DCCA9EScan for Devices
Connect to GATT
Discover Services and Characteristics
6E400001-B5A3-F393-E0A9-E50E24DCCA9E6E400002-B5A3-F393-E0A9-E50E24DCCA9E6E400003-B5A3-F393-E0A9-E50E24DCCA9EEnable Notifications
Send Initial Commands
CMD_APP_START to identify your app to firmware and get radio settingsCMD_DEVICE_QEURY to fetch device info and negotiate supported protocol versionsCMD_SET_DEVICE_TIME to set the firmware clockCMD_GET_CONTACTS to fetch all contactsCMD_GET_CHANNEL multiple times to fetch all channel slotsCMD_SYNC_NEXT_MESSAGE to fetch the next message stored in firmwarePUSH_CODE_MSG_WAITING or PUSH_CODE_ADVERTNote: MeshCore devices may disconnect after periods of inactivity. Implement auto-reconnect logic with exponential backoff.
"},{"location":"companion_protocol/#ble-write-type","title":"BLE Write Type","text":"When writing commands to the RX characteristic, specify the write type:
Platform-specific:
BluetoothGattCharacteristic.WRITE_TYPE_DEFAULT or WRITE_TYPE_NO_RESPONSECBCharacteristicWriteType.withResponse or .withoutResponsewrite_gatt_char() with response=True or FalseRecommendation: Use write with response for reliability.
"},{"location":"companion_protocol/#mtu-maximum-transmission-unit","title":"MTU (Maximum Transmission Unit)","text":"The default BLE MTU is 23 bytes (20 bytes payload). For larger commands like SET_CHANNEL (66 bytes), you may need to:
gatt.requestMtu(512)peripheral.maximumWriteValueLength(for:)Critical: Commands must be sent in the correct sequence:
After Connection:
Command-Response Matching:
CMD_GET_CHANNEL \u2192 RESP_CODE_CHANNEL_INFO)For reliable operation, implement a command queue.
Queue Structure:
Error Handling:
The MeshCore protocol uses a binary format with the following structure:
Most packets follow this format:
[Packet Type (1 byte)] [Data (variable length)]\nThe first byte indicates the packet type (see Response Parsing).
"},{"location":"companion_protocol/#commands","title":"Commands","text":""},{"location":"companion_protocol/#1-app-start","title":"1. App Start","text":"Purpose: Initialize communication with the device. Must be sent first after connection.
Command Format:
Byte 0: 0x01\nByte 1: 0x03\nBytes 2-10: \"mccli\" (ASCII, null-padded to 9 bytes)\nExample (hex):
01 03 6d 63 63 6c 69 00 00 00 00\nResponse: PACKET_OK (0x00)
Purpose: Query device information.
Command Format:
Byte 0: 0x16\nByte 1: 0x03\nExample (hex):
16 03\nResponse: PACKET_DEVICE_INFO (0x0D) with device information
Purpose: Retrieve information about a specific channel.
Command Format:
Byte 0: 0x1F\nByte 1: Channel Index (0-7)\nExample (get channel 1):
1F 01\nResponse: PACKET_CHANNEL_INFO (0x12) with channel details
Note: The device does not return channel secrets for security reasons. Store secrets locally when creating channels.
"},{"location":"companion_protocol/#4-set-channel","title":"4. Set Channel","text":"Purpose: Create or update a channel on the device.
Command Format:
Byte 0: 0x20\nByte 1: Channel Index (0-7)\nBytes 2-33: Channel Name (32 bytes, UTF-8, null-padded)\nBytes 34-65: Secret (32 bytes)\nTotal Length: 66 bytes
Channel Index: - Index 0: Reserved for public channels (no secret) - Indices 1-7: Available for private channels
Channel Name: - UTF-8 encoded - Maximum 32 bytes - Padded with null bytes (0x00) if shorter
Secret Field (32 bytes): - For private channels: 32-byte secret - For public channels: All zeros (0x00)
Example (create channel \"YourChannelName\" at index 1 with secret):
20 01 53 4D 53 00 00 ... (name padded to 32 bytes)\n [32 bytes of secret]\nResponse: PACKET_OK (0x00) on success, PACKET_ERROR (0x01) on failure
Purpose: Send a text message to a channel.
Command Format:
Byte 0: 0x03\nByte 1: 0x00\nByte 2: Channel Index (0-7)\nBytes 3-6: Timestamp (32-bit little-endian Unix timestamp, seconds)\nBytes 7+: Message Text (UTF-8, variable length)\nTimestamp: Unix timestamp in seconds (32-bit unsigned integer, little-endian)
Example (send \"Hello\" to channel 1 at timestamp 1234567890):
03 00 01 D2 02 96 49 48 65 6C 6C 6F\nResponse: PACKET_MSG_SENT (0x06) on success
Purpose: Request the next queued message from the device.
Command Format:
Byte 0: 0x0A\nExample (hex):
0A\nResponse: - PACKET_CHANNEL_MSG_RECV (0x08) or PACKET_CHANNEL_MSG_RECV_V3 (0x11) for channel messages - PACKET_CONTACT_MSG_RECV (0x07) or PACKET_CONTACT_MSG_RECV_V3 (0x10) for contact messages - PACKET_NO_MORE_MSGS (0x0A) if no messages available
Note: Poll this command periodically to retrieve queued messages. The device may also send PACKET_MESSAGES_WAITING (0x83) as a notification when messages are available.
Purpose: Query device battery level.
Command Format:
Byte 0: 0x14\nExample (hex):
14\nResponse: PACKET_BATTERY (0x0C) with battery percentage
8b3387e9c5cdea6ac9e5edbaa115cd72sha256(\"#test\")#test has the key: 9cd8fcf22a47333b591d96a2b848b73fCMD_SET_CHANNEL with name and secretCMD_GET_CHANNEL with channel indexRESP_CODE_CHANNEL_INFO responseCMD_SET_CHANNEL with empty name and all-zero secretMessages are received via the RX characteristic (notifications). The device sends:
PACKET_CHANNEL_MSG_RECV (0x08) - Standard formatPACKET_CHANNEL_MSG_RECV_V3 (0x11) - Version 3 with SNR
Contact Messages:
PACKET_CONTACT_MSG_RECV (0x07) - Standard formatPACKET_CONTACT_MSG_RECV_V3 (0x10) - Version 3 with SNR
Notifications:
PACKET_MESSAGES_WAITING (0x83) - Indicates messages are queuedStandard Format (PACKET_CONTACT_MSG_RECV, 0x07):
Byte 0: 0x07 (packet type)\nBytes 1-6: Public Key Prefix (6 bytes, hex)\nByte 7: Path Length\nByte 8: Text Type\nBytes 9-12: Timestamp (32-bit little-endian)\nBytes 13-16: Signature (4 bytes, only if txt_type == 2)\nBytes 17+: Message Text (UTF-8)\nV3 Format (PACKET_CONTACT_MSG_RECV_V3, 0x10):
Byte 0: 0x10 (packet type)\nByte 1: SNR (signed byte, multiplied by 4)\nBytes 2-3: Reserved\nBytes 4-9: Public Key Prefix (6 bytes, hex)\nByte 10: Path Length\nByte 11: Text Type\nBytes 12-15: Timestamp (32-bit little-endian)\nBytes 16-19: Signature (4 bytes, only if txt_type == 2)\nBytes 20+: Message Text (UTF-8)\nParsing Pseudocode:
def parse_contact_message(data):\n packet_type = data[0]\n offset = 1\n\n # Check for V3 format\n if packet_type == 0x10: # V3\n snr_byte = data[offset]\n snr = ((snr_byte if snr_byte < 128 else snr_byte - 256) / 4.0)\n offset += 3 # Skip SNR + reserved\n\n pubkey_prefix = data[offset:offset+6].hex()\n offset += 6\n\n path_len = data[offset]\n txt_type = data[offset + 1]\n offset += 2\n\n timestamp = int.from_bytes(data[offset:offset+4], 'little')\n offset += 4\n\n # If txt_type == 2, skip 4-byte signature\n if txt_type == 2:\n offset += 4\n\n message = data[offset:].decode('utf-8')\n\n return {\n 'pubkey_prefix': pubkey_prefix,\n 'path_len': path_len,\n 'txt_type': txt_type,\n 'timestamp': timestamp,\n 'message': message,\n 'snr': snr if packet_type == 0x10 else None\n }\nStandard Format (PACKET_CHANNEL_MSG_RECV, 0x08):
Byte 0: 0x08 (packet type)\nByte 1: Channel Index (0-7)\nByte 2: Path Length\nByte 3: Text Type\nBytes 4-7: Timestamp (32-bit little-endian)\nBytes 8+: Message Text (UTF-8)\nV3 Format (PACKET_CHANNEL_MSG_RECV_V3, 0x11):
Byte 0: 0x11 (packet type)\nByte 1: SNR (signed byte, multiplied by 4)\nBytes 2-3: Reserved\nByte 4: Channel Index (0-7)\nByte 5: Path Length\nByte 6: Text Type\nBytes 7-10: Timestamp (32-bit little-endian)\nBytes 11+: Message Text (UTF-8)\nParsing Pseudocode:
def parse_channel_message(data):\n packet_type = data[0]\n offset = 1\n\n # Check for V3 format\n if packet_type == 0x11: # V3\n snr_byte = data[offset]\n snr = ((snr_byte if snr_byte < 128 else snr_byte - 256) / 4.0)\n offset += 3 # Skip SNR + reserved\n\n channel_idx = data[offset]\n path_len = data[offset + 1]\n txt_type = data[offset + 2]\n timestamp = int.from_bytes(data[offset+3:offset+7], 'little')\n message = data[offset+7:].decode('utf-8')\n\n return {\n 'channel_idx': channel_idx,\n 'timestamp': timestamp,\n 'message': message,\n 'snr': snr if packet_type == 0x11 else None\n }\nUse the SEND_CHANNEL_MESSAGE command (see Commands).
Important: - Messages are limited to 133 characters per MeshCore specification - Long messages should be split into chunks - Include a chunk indicator (e.g., \"[1/3] message text\")
"},{"location":"companion_protocol/#response-parsing","title":"Response Parsing","text":""},{"location":"companion_protocol/#packet-types","title":"Packet Types","text":"Value Name Description 0x00 PACKET_OK Command succeeded 0x01 PACKET_ERROR Command failed 0x02 PACKET_CONTACT_START Start of contact list 0x03 PACKET_CONTACT Contact information 0x04 PACKET_CONTACT_END End of contact list 0x05 PACKET_SELF_INFO Device self-information 0x06 PACKET_MSG_SENT Message sent confirmation 0x07 PACKET_CONTACT_MSG_RECV Contact message (standard) 0x08 PACKET_CHANNEL_MSG_RECV Channel message (standard) 0x09 PACKET_CURRENT_TIME Current time response 0x0A PACKET_NO_MORE_MSGS No more messages available 0x0C PACKET_BATTERY Battery level 0x0D PACKET_DEVICE_INFO Device information 0x10 PACKET_CONTACT_MSG_RECV_V3 Contact message (V3 with SNR) 0x11 PACKET_CHANNEL_MSG_RECV_V3 Channel message (V3 with SNR) 0x12 PACKET_CHANNEL_INFO Channel information 0x80 PACKET_ADVERTISEMENT Advertisement packet 0x82 PACKET_ACK Acknowledgment 0x83 PACKET_MESSAGES_WAITING Messages waiting notification 0x88 PACKET_LOG_DATA RF log data (can be ignored)"},{"location":"companion_protocol/#parsing-responses","title":"Parsing Responses","text":"PACKET_OK (0x00):
Byte 0: 0x00\nBytes 1-4: Optional value (32-bit little-endian integer)\nPACKET_ERROR (0x01):
Byte 0: 0x01\nByte 1: Error code (optional)\nPACKET_CHANNEL_INFO (0x12):
Byte 0: 0x12\nByte 1: Channel Index\nBytes 2-33: Channel Name (32 bytes, null-terminated)\nBytes 34-65: Secret (32 bytes, but device typically only returns 20 bytes total)\nNote: The device may not return the full 66-byte packet. Parse what is available. The secret field is typically not returned for security reasons.
PACKET_DEVICE_INFO (0x0D):
Byte 0: 0x0D\nByte 1: Firmware Version (uint8)\nBytes 2+: Variable length based on firmware version\n\nFor firmware version >= 3:\nByte 2: Max Contacts Raw (uint8, actual = value * 2)\nByte 3: Max Channels (uint8)\nBytes 4-7: BLE PIN (32-bit little-endian)\nBytes 8-19: Firmware Build (12 bytes, UTF-8, null-padded)\nBytes 20-59: Model (40 bytes, UTF-8, null-padded)\nBytes 60-79: Version (20 bytes, UTF-8, null-padded)\nParsing Pseudocode:
def parse_device_info(data):\n if len(data) < 2:\n return None\n\n fw_ver = data[1]\n info = {'fw_ver': fw_ver}\n\n if fw_ver >= 3 and len(data) >= 80:\n info['max_contacts'] = data[2] * 2\n info['max_channels'] = data[3]\n info['ble_pin'] = int.from_bytes(data[4:8], 'little')\n info['fw_build'] = data[8:20].decode('utf-8').rstrip('\\x00').strip()\n info['model'] = data[20:60].decode('utf-8').rstrip('\\x00').strip()\n info['ver'] = data[60:80].decode('utf-8').rstrip('\\x00').strip()\n\n return info\nPACKET_BATTERY (0x0C):
Byte 0: 0x0C\nBytes 1-2: Battery Level (16-bit little-endian, percentage 0-100)\n\nOptional (if data size > 3):\nBytes 3-6: Used Storage (32-bit little-endian, KB)\nBytes 7-10: Total Storage (32-bit little-endian, KB)\nParsing Pseudocode:
def parse_battery(data):\n if len(data) < 3:\n return None\n\n level = int.from_bytes(data[1:3], 'little')\n info = {'level': level}\n\n if len(data) > 3:\n used_kb = int.from_bytes(data[3:7], 'little')\n total_kb = int.from_bytes(data[7:11], 'little')\n info['used_kb'] = used_kb\n info['total_kb'] = total_kb\n\n return info\nPACKET_SELF_INFO (0x05):
Byte 0: 0x05\nByte 1: Advertisement Type\nByte 2: TX Power\nByte 3: Max TX Power\nBytes 4-35: Public Key (32 bytes, hex)\nBytes 36-39: Advertisement Latitude (32-bit little-endian, divided by 1e6)\nBytes 40-43: Advertisement Longitude (32-bit little-endian, divided by 1e6)\nByte 44: Multi ACKs\nByte 45: Advertisement Location Policy\nByte 46: Telemetry Mode (bitfield)\nByte 47: Manual Add Contacts (bool)\nBytes 48-51: Radio Frequency (32-bit little-endian, divided by 1000.0)\nBytes 52-55: Radio Bandwidth (32-bit little-endian, divided by 1000.0)\nByte 56: Radio Spreading Factor\nByte 57: Radio Coding Rate\nBytes 58+: Device Name (UTF-8, variable length, null-terminated)\nParsing Pseudocode:
def parse_self_info(data):\n if len(data) < 36:\n return None\n\n offset = 1\n info = {\n 'adv_type': data[offset],\n 'tx_power': data[offset + 1],\n 'max_tx_power': data[offset + 2],\n 'public_key': data[offset + 3:offset + 35].hex()\n }\n offset += 35\n\n lat = int.from_bytes(data[offset:offset+4], 'little') / 1e6\n lon = int.from_bytes(data[offset+4:offset+8], 'little') / 1e6\n info['adv_lat'] = lat\n info['adv_lon'] = lon\n offset += 8\n\n info['multi_acks'] = data[offset]\n info['adv_loc_policy'] = data[offset + 1]\n telemetry_mode = data[offset + 2]\n info['telemetry_mode_env'] = (telemetry_mode >> 4) & 0b11\n info['telemetry_mode_loc'] = (telemetry_mode >> 2) & 0b11\n info['telemetry_mode_base'] = telemetry_mode & 0b11\n info['manual_add_contacts'] = data[offset + 3] > 0\n offset += 4\n\n freq = int.from_bytes(data[offset:offset+4], 'little') / 1000.0\n bw = int.from_bytes(data[offset+4:offset+8], 'little') / 1000.0\n info['radio_freq'] = freq\n info['radio_bw'] = bw\n info['radio_sf'] = data[offset + 8]\n info['radio_cr'] = data[offset + 9]\n offset += 10\n\n if offset < len(data):\n name_bytes = data[offset:]\n info['name'] = name_bytes.decode('utf-8').rstrip('\\x00').strip()\n\n return info\nPACKET_MSG_SENT (0x06):
Byte 0: 0x06\nByte 1: Message Type\nBytes 2-5: Expected ACK (4 bytes, hex)\nBytes 6-9: Suggested Timeout (32-bit little-endian, seconds)\nPACKET_ACK (0x82):
Byte 0: 0x82\nBytes 1-6: ACK Code (6 bytes, hex)\nPACKET_ERROR (0x01) may include an error code in byte 1:
Error Code Description 0x00 Generic error (no specific code) 0x01 Invalid command 0x02 Invalid parameter 0x03 Channel not found 0x04 Channel already exists 0x05 Channel index out of range 0x06 Secret mismatch 0x07 Message too long 0x08 Device busy 0x09 Not enough storageNote: Error codes may vary by firmware version. Always check byte 1 of PACKET_ERROR response.
BLE notifications may arrive in chunks, especially for larger packets. Implement buffering:
Implementation:
class PacketBuffer:\n def __init__(self):\n self.buffer = bytearray()\n self.expected_length = None\n\n def add_data(self, data):\n self.buffer.extend(data)\n\n # Check if we have a complete packet\n if len(self.buffer) >= 1:\n packet_type = self.buffer[0]\n\n # Determine expected length based on packet type\n expected = self.get_expected_length(packet_type)\n\n if expected is not None and len(self.buffer) >= expected:\n # Complete packet\n packet = bytes(self.buffer[:expected])\n self.buffer = self.buffer[expected:]\n return packet\n elif expected is None:\n # Variable length packet - try to parse what we have\n # Some packets have minimum length requirements\n if self.can_parse_partial(packet_type):\n return self.try_parse_partial()\n\n return None # Incomplete packet\n\n def get_expected_length(self, packet_type):\n # Fixed-length packets\n fixed_lengths = {\n 0x00: 5, # PACKET_OK (minimum)\n 0x01: 2, # PACKET_ERROR (minimum)\n 0x0A: 1, # PACKET_NO_MORE_MSGS\n 0x14: 3, # PACKET_BATTERY (minimum)\n }\n return fixed_lengths.get(packet_type)\n\n def can_parse_partial(self, packet_type):\n # Some packets can be parsed partially\n return packet_type in [0x12, 0x08, 0x11, 0x07, 0x10, 0x05, 0x0D]\n\n def try_parse_partial(self):\n # Try to parse with available data\n # Return packet if successfully parsed, None otherwise\n # This is packet-type specific\n pass\nUsage:
buffer = PacketBuffer()\n\ndef on_notification_received(data):\n packet = buffer.add_data(data)\n if packet:\n parse_and_handle_packet(packet)\nUse command queue to prevent concurrent commands
Asynchronous Messages:
PACKET_MESSAGES_WAITING (0x83) by polling GET_MESSAGE commandBuffer partial packets until complete
Response Matching:
Match responses to commands by expected packet type:
APP_START \u2192 PACKET_OKDEVICE_QUERY \u2192 PACKET_DEVICE_INFOGET_CHANNEL \u2192 PACKET_CHANNEL_INFOSET_CHANNEL \u2192 PACKET_OK or PACKET_ERRORSEND_CHANNEL_MESSAGE \u2192 PACKET_MSG_SENTGET_MESSAGE \u2192 PACKET_CHANNEL_MSG_RECV, PACKET_CONTACT_MSG_RECV, or PACKET_NO_MORE_MSGSGET_BATTERY \u2192 PACKET_BATTERYTimeout Handling:
SET_CHANNEL may need 1-2 seconds)Consider longer timeout for channel operations
Error Recovery:
PACKET_ERROR: Log error code, clear current command# 1. Scan for MeshCore device\ndevice = scan_for_device(\"MeshCore\")\n\n# 2. Connect to BLE GATT\ngatt = connect_to_device(device)\n\n# 3. Discover services and characteristics\nservice = discover_service(gatt, \"0000ff00-0000-1000-8000-00805f9b34fb\")\nrx_char = discover_characteristic(service, \"0000ff01-0000-1000-8000-00805f9b34fb\")\ntx_char = discover_characteristic(service, \"0000ff02-0000-1000-8000-00805f9b34fb\")\n\n# 4. Enable notifications on RX characteristic\nenable_notifications(rx_char, on_notification_received)\n\n# 5. Send AppStart command\nsend_command(tx_char, build_app_start())\nwait_for_response(PACKET_OK)\n# 1. Generate 16-byte secret\nsecret_16_bytes = generate_secret(16) # Use CSPRNG\nsecret_hex = secret_16_bytes.hex()\n\n# 2. Expand secret to 32 bytes using SHA-512\nimport hashlib\nsha512_hash = hashlib.sha512(secret_16_bytes).digest()\nsecret_32_bytes = sha512_hash[:32]\n\n# 3. Build SET_CHANNEL command\nchannel_name = \"YourChannelName\"\nchannel_index = 1 # Use 1-7 for private channels\ncommand = build_set_channel(channel_index, channel_name, secret_32_bytes)\n\n# 4. Send command\nsend_command(tx_char, command)\nresponse = wait_for_response(PACKET_OK)\n\n# 5. Store secret locally (device won't return it)\nstore_channel_secret(channel_index, secret_hex)\n# 1. Build channel message command\nchannel_index = 1\nmessage = \"Hello, MeshCore!\"\ntimestamp = int(time.time())\ncommand = build_channel_message(channel_index, message, timestamp)\n\n# 2. Send command\nsend_command(tx_char, command)\nresponse = wait_for_response(PACKET_MSG_SENT)\ndef on_notification_received(data):\n packet_type = data[0]\n\n if packet_type == PACKET_CHANNEL_MSG_RECV or packet_type == PACKET_CHANNEL_MSG_RECV_V3:\n message = parse_channel_message(data)\n handle_channel_message(message)\n elif packet_type == PACKET_MESSAGES_WAITING:\n # Poll for messages\n send_command(tx_char, build_get_message())\nStore last connected device address for quick reconnection
Secret Management:
Never log or transmit secrets in plain text
Message Handling:
CMD_SYNC_NEXT_MESSAGE when PUSH_CODE_MSG_WAITING is receivedImplement message deduplication to avoid display the same message twice
Channel Management:
Error Handling:
RESP_CODE_ERR responses appropriatelyGET_MESSAGE command periodicallyThis document explains how to build and view the MeshCore documentation locally.
"},{"location":"docs/#building-and-viewing-docs","title":"Building and viewing Docs","text":"pip install mkdocs\npip install mkdocs-material\nmkdocs serve - Start the live-reloading docs server.mkdocs build - Build the documentation site.A list of frequently-asked questions and answers for MeshCore
A: MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement and private security and also IoT sensor networks. (source)
MeshCore is free and open source: * MeshCore is the routing and firmware etc, available on GitHub under MIT license * There are clients made by the community, such as the web clients, these are free to use, and some are open source too * The cross platform mobile app developed by Liam Cottle for Android/iOS/PC etc is free to download and use * The T-Deck firmware is developed by Scott at Ripple Radios, the creator of MeshCore, is also free to flash on your devices and use
Some more advanced, but optional features are available on T-Deck if you register your device for a key to unlock. On the MeshCore smartphone clients for Android and iOS/iPadOS, you can unlock the wait timer for repeater and room server remote management over RF feature.
These features are completely optional and aren't needed for the core messaging experience. They're like super bonus features and to help the developers continue to work on these amazing features, they may charge a small fee for an unlock code to utilise the advanced features.
Anyone is able to build anything they like on top of MeshCore without paying anything.
"},{"location":"faq/#12-q-what-do-you-need-to-start-using-meshcore","title":"1.2. Q: What do you need to start using MeshCore?","text":"A: Everything you need for MeshCore is available at:
You need LoRa hardware devices to run MeshCore firmware as clients or server (repeater and room server).
"},{"location":"faq/#121-hardware","title":"1.2.1. Hardware","text":"MeshCore is available on a variety of 433MHz, 868MHz and 915MHz LoRa devices. For example, Lilygo T-Deck, T-Pager, RAK Wireless WisBlock RAK4631 devices (e.g. 19003, 19007, 19026), Heltec V3, Xiao S3 WIO, Xiao C3, Heltec T114, Station G2, Nano G2 Ultra, Seeed Studio T1000-E. More devices are being added regularly.
For an up-to-date list of supported devices, please go to https://flasher.meshcore.co.uk/
To use MeshCore without using a phone as the client interface, you can run MeshCore on a LiLygo's T-Deck, T-Deck Plus, T-Pager, T-Watch, or T-Display Pro. MeshCore Ultra firmware running on these devices are a complete off-grid secure communication solution.
"},{"location":"faq/#122-firmware","title":"1.2.2. Firmware","text":"MeshCore has four firmware types that are not available on other LoRa systems. MeshCore has the following:
"},{"location":"faq/#123-companion-radio-firmware","title":"1.2.3. Companion Radio Firmware","text":"Companion radios are for connecting to the Android app or web app as a messenger client. There are two different companion radio firmware versions:
BLE Companion BLE Companion firmware runs on a supported LoRa device and connects to a smart device running the Android or iOS MeshCore client over BLE https://meshcore.co.uk/apps.html
USB Serial Companion USB Serial Companion firmware runs on a supported LoRa device and connects to a smart device or a computer over USB Serial running the MeshCore web client https://meshcore.liamcottle.net/#/ https://client.meshcore.co.uk/tabs/devices
Repeaters are used to extend the range of a MeshCore network. Repeater firmware runs on the same devices that run client firmware. A repeater's job is to forward MeshCore packets to the destination device. It does not forward or retransmit every packet it receives, unlike other LoRa mesh systems.
A repeater can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.
"},{"location":"faq/#125-room-server","title":"1.2.5. Room Server","text":"A room server is a simple BBS server for sharing posts. T-Deck devices running MeshCore firmware or a BLE Companion client connected to a smartphone running the MeshCore app can connect to a room server.
Room servers store message history on them and push the stored messages to users. Room servers allow roaming users to come back later and retrieve message history. With channels, messages are either received when it's sent, or not received and missed if the channel user is out of range. Room servers are different and more like email servers where you can come back later and get your emails from your mail server.
A room server can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.
When a client logs into a room server, the client will receive the previously 32 unseen messages.
Although room server can also repeat with the command line command set repeat on, it is not recommended nor encouraged. A room server with repeat set to on lacks the full set of repeater and remote administration features that are only available in the repeater firmware.
The recommendation is to run repeater and room server on separate devices for the best experience.
"},{"location":"faq/#2-initial-setup","title":"2. Initial Setup","text":""},{"location":"faq/#21-q-how-many-devices-do-i-need-to-start-using-meshcore","title":"2.1. Q: How many devices do I need to start using MeshCore?","text":"A: If you have one supported device, flash the BLE Companion firmware and use your device as a client. You can connect to the device using the Android or iOS client via Bluetooth. You can start communicating with other MeshCore users near you.
If you have two supported devices, and there are not many MeshCore users near you, flash both to BLE Companion firmware so you can use your devices to communicate with your near-by friends and family.
If you have two supported devices, and there are other MeshCore users nearby, you can flash one of your devices with BLE Companion firmware and flash another supported device to repeater firmware. Place the repeater high above ground to extend your MeshCore network's reach.
After you flashed the latest firmware onto your repeater device, keep the device connected to your computer via USB serial, use the console feature on the web flasher and set the frequency for your region or country, so your client can remote administer the repeater or room server over RF:
set freq {frequency}
The repeater and room server CLI reference is here: https://github.com/meshcore-dev/MeshCore/wiki/Repeater-&-Room-Server-CLI-Reference
If you have more supported devices, you can use your additional devices with the room server firmware.
"},{"location":"faq/#22-q-does-meshcore-cost-any-money","title":"2.2. Q: Does MeshCore cost any money?","text":"A: All radio firmware versions (e.g. for Heltec V3, RAK, T-1000E, etc) are free and open source developed by Scott at Ripple Radios.
The native Android and iOS client uses the freemium model and is developed by Liam Cottle, developer of meshtastic map at meshtastic.liamcottle.net on GitHub and reticulum-meshchat on github.
The T-Deck firmware is free to download and most features are available without cost. To support the firmware developer, you can pay for a registration key to unlock your T-Deck for deeper map zoom and remote server administration over RF using the T-Deck. You do not need to pay for the registration to use your T-Deck for direct messaging and connecting to repeaters and room servers.
"},{"location":"faq/#23-q-what-frequencies-are-supported-by-meshcore","title":"2.3. Q: What frequencies are supported by MeshCore?","text":"A: It supports the 868MHz range in the UK/EU and the 915MHz range in New Zealand, Australia, and the USA. Countries and regions in these two frequency ranges are also supported.
Use the smartphone client or the repeater setup feature on there web flasher to set your radios' RF settings by choosing the preset for your regions.
Recently, as of October 2025, many regions have moved to the \"narrow\" setting, aka using BW62.5 and a lower SF number (instead of the original SF11). For example, USA/Canada (Recommended) preset is 910.525MHz, SF7, BW62.5, CR5.
After extensive testing, many regions have switched or about to switch over to BW62.5 and SF7, 8, or 9. Narrower bandwidth setting and lower SF setting allow MeshCore's radio signals to fit between interference in the ISM band, provide for a lower noise floor, better SNR, and faster transmissions.
If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on the #meshcore-app channel on the MeshCore Discord server to let Liam Cottle know.
"},{"location":"faq/#24-q-what-is-an-advert-in-meshcore","title":"2.4. Q: What is an \"advert\" in MeshCore?","text":"A: Advert means to advertise yourself on the network. In Reticulum terms it would be to announce. In Meshtastic terms it would be the node sending its node info.
MeshCore allows you to manually broadcast your name, position and public encryption key, which is also signed to prevent spoofing. When you click the advert button, it broadcasts that data over LoRa. MeshCore calls that an Advert. There's two ways to advert, \"zero hop\" and \"flood\".
MeshCore clients only advertise themselves when the user initiates it. A repeater sends a flood advert once every 3 hours by default. This interval can be configured using the following command:
set advert.interval {minutes}
As of Aug 20 2025, a pending PR on github will change the flood advert to 12 hours to minimize airtime utilization caused by repeaters' flood adverts.
"},{"location":"faq/#25-q-is-there-a-hop-limit","title":"2.5. Q: Is there a hop limit?","text":"A: Internally the firmware has maximum limit of 64 hops. In real world settings it will be difficult to get close to the limit due to the environments and timing as packets travel further and further. We want to hear how far your MeshCore conversations go.
"},{"location":"faq/#3-server-administration","title":"3. Server Administration","text":""},{"location":"faq/#31-q-how-do-you-configure-a-repeater-or-a-room-server","title":"3.1. Q: How do you configure a repeater or a room server?","text":"A: - When MeshCore is flashed onto a LoRa device is for the first time, it is necessary to set the server device's frequency to make it utilize the frequency that is legal in your country or region.
Repeater or room server can be administered with one of the options below:
Connect the server device using a USB cable to a computer running Chrome on https://flasher.meshcore.co.uk/, then use the console feature to connect to the device
Use a MeshCore smartphone clients to remotely administer servers via LoRa.
A T-Deck running unlocked/registered MeshCore firmware. Remote server administration is enabled through registering your T-Deck with Ripple Radios. It is one of the ways to support MeshCore development. You can register your T-Deck at:
https://buymeacoffee.com/ripplebiz/e/249834
"},{"location":"faq/#32-q-do-i-need-to-set-the-location-for-a-repeater","title":"3.2. Q: Do I need to set the location for a repeater?","text":"A: While not required, with location set for a repeater it will show up on the MeshCore map in the future. Set location with the following command:
set lat <GPS Lat> set long <GPS Lon>
You can get the latitude and longitude from Google Maps by right-clicking the location you are at on the map.
"},{"location":"faq/#33-q-what-is-the-password-to-administer-a-repeater-or-a-room-server","title":"3.3. Q: What is the password to administer a repeater or a room server?","text":"A: The default admin password to a repeater and room server is password. Use the following command to change the admin password:
password {new-password}
A: The default guest password to a room server is hello. Use the following command to change the guest password:
set guest.password {guest-password}
A: You can issue these commands to get or set a repeater's private key using a USB serial connection.
get prv.key to print a repeater's private key on the serial console set prv.key <hex> to set a repeater's private key on the serial console
Reboot the repeater after set prv.key <hex> command for the new private key to take effect.
A: You can generate a new private key and specific the first byte of its public key here: https://gessaman.com/mc-keygen/
"},{"location":"faq/#37-q-my-repeater-maybe-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios-what-can-i-do","title":"3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do?","text":"A: This may be due to the SX1262 radio's auto gain control feature. You can use this command to periodically reset its AGC.
set agc.reset.interval <number>
The <number> unit is in seconds and is incremented by 4. set agc.reset.interval 4 works well to cure deafness.
This is a very low cost operation. AGC reset is done by simply setting state = STATE_IDLE; in function RadioLibWrapper::resetAGC() in RadioLibWrappers.cpp
A: The observer instruction is available here: https://analyzer.letsmesh.net/observer/onboard
"},{"location":"faq/#4-t-deck-related","title":"4. T-Deck Related","text":""},{"location":"faq/#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro","title":"4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?","text":"A: Yes, it is available on https://buymeacoffee.com/ripplebiz/ultra-v7-7-guide-meshcore-users
"},{"location":"faq/#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode","title":"4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?","text":"A: 1. Device off 2. Connect USB cable to device 3. Hold down trackball (keep holding) 4. Turn on device 5. Hear USB connection sound 6. Release trackball 7. T-Deck in DFU mode now 8. At this point you can begin flashing using https://flasher.meshcore.co.uk/
"},{"location":"faq/#43-q-why-is-my-t-deck-plus-not-getting-any-satellite-lock","title":"4.3. Q: Why is my T-Deck Plus not getting any satellite lock?","text":"A: For T-Deck Plus, the GPS baud rate should be set to 38400. Also, some T-Deck Plus devices were found to have the GPS module installed upside down, with the GPS antenna facing down instead of up. If your T-Deck Plus still doesn't get any satellite lock after setting the baud rate to 38400, you might need to open the device to check the GPS orientation.
GPS on T-Deck is always enabled. You can skip the \"GPS clock sync\" and the T-Deck will continue to try to get a GPS lock. You can go to the GPS Info screen; you should see the Sentences: counter increasing if the baud rate is correct.
Source
"},{"location":"faq/#44-q-why-is-my-og-non-plus-t-deck-not-getting-any-satellite-lock","title":"4.4. Q: Why is my OG (non-Plus) T-Deck not getting any satellite lock?","text":"A: The OG (non-Plus) T-Deck doesn't come with a GPS. If you added a GPS to your OG T-Deck, please refer to the manual of your GPS to see what baud rate it requires. Alternatively, you can try to set the baud rate from 9600, 19200, etc., and up to 115200 to see which one works.
"},{"location":"faq/#45-q-what-size-of-sd-card-does-the-t-deck-support","title":"4.5. Q: What size of SD card does the T-Deck support?","text":"A: Users have had no issues using 16GB or 32GB SD cards. Format the SD card to FAT32.
"},{"location":"faq/#46-q-what-is-the-public-key-for-the-default-public-channel","title":"4.6. Q: what is the public key for the default public channel?","text":"A: T-Deck uses the same key the smartphone apps use but in base64 izOH6cXN6mrJ5e26oRXNcg==
There is no = key on the T-Deck's hardware keyboard. You can use the on-screen software keyboard to enter =. Tap the text box to enable the on-screen software keyboard. The third character is the capital letter O (Oh), not zero 0
The smartphone app key is in hex: 8b3387e9c5cdea6ac9e5edbaa115cd72
Source
"},{"location":"faq/#47-q-how-do-i-get-maps-on-t-deck","title":"4.7. Q: How do I get maps on T-Deck?","text":"A: You need map tiles. You can get pre-downloaded map tiles here (a good way to support development): - https://buymeacoffee.com/ripplebiz/e/342543 (Europe) - https://buymeacoffee.com/ripplebiz/e/342542 (US)
Another way to download map tiles is to use this Python script to get the tiles in the areas you want: https://github.com/fistulareffigy/MTD-Script
There is also a modified script that adds additional error handling and parallel downloads: https://discord.com/channels/826570251612323860/1330643963501351004/1338775811548905572
UK map tiles are available separately from Andy Kirby on his discord server: https://discord.com/channels/826570251612323860/1330643963501351004/1331346597367386224
"},{"location":"faq/#48-q-where-do-the-map-tiles-go","title":"4.8. Q: Where do the map tiles go?","text":"Once you have the tiles downloaded, copy the \\tiles folder to the root of your T-Deck's SD card.
A: You can download, install, and use the T-Deck firmware for free, but it has some features (map zoom, server administration) that are enabled if you purchase an unlock code for \\$10 per T-Deck device. Unlock page: https://buymeacoffee.com/ripplebiz/e/249834
"},{"location":"faq/#410-q-how-to-decipher-the-diagnostics-screen-on-t-deck","title":"4.10. Q: How to decipher the diagnostics screen on T-Deck?","text":"**A: ** Space is tight on T-Deck's screen, so the information is a bit cryptic. The format is : {hops} l:{packet-length}({payload-len}) t:{packet-type} snr:{n} rssi:{n}
See here for packet-type: https://github.com/meshcore-dev/MeshCore/blob/main/src/Packet.h#L19
#define PAYLOAD_TYPE_REQ 0x00 // request (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob)\n#define PAYLOAD_TYPE_RESPONSE 0x01 // response to REQ or ANON_REQ (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob)\n#define PAYLOAD_TYPE_TXT_MSG 0x02 // a plain text message (prefixed with dest/src hashes, MAC) (enc data: timestamp, text)\n#define PAYLOAD_TYPE_ACK 0x03 // a simple ack #define PAYLOAD_TYPE_ADVERT 0x04 // a node advertising its Identity\n#define PAYLOAD_TYPE_GRP_TXT 0x05 // an (unverified) group text message (prefixed with channel hash, MAC) (enc data: timestamp, \"name: msg\")\n#define PAYLOAD_TYPE_GRP_DATA 0x06 // an (unverified) group datagram (prefixed with channel hash, MAC) (enc data: timestamp, blob)\n#define PAYLOAD_TYPE_ANON_REQ 0x07 // generic request (prefixed with dest_hash, ephemeral pub_key, MAC) (enc data: ...)\n#define PAYLOAD_TYPE_PATH 0x08 // returned path (prefixed with dest/src hashes, MAC) (enc data: path, extra)\nSource
"},{"location":"faq/#411-q-the-t-deck-sound-is-too-loud","title":"4.11. Q: The T-Deck sound is too loud?","text":""},{"location":"faq/#412-q-can-you-customize-the-sound","title":"4.12. Q: Can you customize the sound?","text":"A: You can customise the sounds on the T-Deck, by placing .mp3 files onto the root dir of the SD card. The files are:
startup.mp3error.mp3alert.mp3new-advert.mp3existing-advert.mp3A: 'Import from Clipboard' is for importing a contact via a file named 'clipboard.txt' on the SD card. The opposite, is in the Identity screen, the 'Card to Clipboard' menu, which writes to 'clipboard.txt' so you can share yourself (call these 'biz cards', that start with \"meshcore://...\")
"},{"location":"faq/#414-q-how-to-capture-a-screenshot-on-t-deck","title":"4.14. Q: How to capture a screenshot on T-Deck?","text":"A: To capture a screenshot on a T-Deck, long press the top-left corner of the screen. The screenshot is saved to the microSD card, if one is inserted into the device.
"},{"location":"faq/#5-general","title":"5. General","text":""},{"location":"faq/#51-q-what-are-bw-sf-and-cr","title":"5.1. Q: What are BW, SF, and CR?","text":"A:
BW is bandwidth - width of frequency spectrum that is used for transmission
SF is spreading factor - how much should the communication spread in time
CR is coding rate - from: https://www.thethingsnetwork.org/docs/lorawan/fec-and-code-rate/
TL;DR: default CR to 5 for good stable links. If it is not a solid link and is intermittent, change to CR to 7 or 8.
Forward Error Correction is a process of adding redundant bits to the data to be transmitted. During the transmission, data may get corrupted by interference (changes from 0 to 1 / 1 to 0). These error correction bits are used at the receivers for restoring corrupted bits.
The Code Rate of a forward error correction expresses the proportion of bits in a data stream that actually carry useful information.
There are 4 code rates used in LoRaWAN:
4/5 4/6 5/7 4/8
For example, if the code rate is 5/7, for every 5 bits of useful information, the coder generates a total of 7 bits of data, of which 2 bits are redundant.
Making the bandwidth 2x wider (from BW125 to BW250) allows you to send 2x more bytes in the same time. Making the spreading factor 1 step lower (from SF10 to SF9) allows you to send 2x more bytes in the same time.
Lowering the spreading factor makes it more difficult for the gateway to receive a transmission, as it will be more sensitive to noise. You could compare this to two people taking in a noisy place (a bar for example). If you\u2019re far from each other, you have to talk slow (SF10), but if you\u2019re close, you can talk faster (SF7)
So, it's balancing act between speed of the transmission and resistance to noise. things network is mainly focused on LoRaWAN, but the LoRa low-level stuff still checks out for any LoRa project
"},{"location":"faq/#52-q-do-meshcore-clients-repeat","title":"5.2. Q: Do MeshCore clients repeat?","text":"A: No, MeshCore clients do not repeat. This is the core of MeshCore's messaging-first design. This is to avoid devices flooding the air ware and create endless collisions, so messages sent aren't received. In MeshCore, only repeaters and room server with set repeat on repeat.
A: If you used to reach a node through a repeater and the repeater is no longer reachable, the client will send the message using the existing (but now broken) known path, the message will fail after 3 retries, and the app will reset the path and send the message as flood on the last retry by default. This can be turned off in settings. If the destination is reachable directly or through another repeater, the new path will be used going forward. Or you can set the path manually if you know a specific repeater to use to reach that destination.
In the case if users are moving around frequently, and the paths are breaking, they just see the phone client retries and revert to flood to attempt to re-establish a path.
"},{"location":"faq/#54-q-how-does-a-node-discovery-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic","title":"5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?","text":"Routes are stored in sender's contact list. When you send a message the first time, the message first gets to your destination by flood routing. When your destination node gets the message, it will send back a delivery report to the sender with all repeaters that the original message went through. This delivery report is flood-routed back to you the sender and is a basis for future direct path. When you send the next message, the path will get embedded into the packet and be evaluated by repeaters. If the hop and address of the repeater matches, it will retransmit the message, otherwise it will not retransmit, hence minimizing utilization.
Source
"},{"location":"faq/#55-q-do-public-channels-always-flood-do-private-channels-always-flood","title":"5.5. Q: Do public channels always flood? Do private channels always flood?","text":"A: Yes, group channels are A to B, so there is no defined path. They have to flood. Repeaters can however deny flood traffic up to some hop limit, with the set flood.max CLI command. Administrators of repeaters get to set the rules of their repeaters.
Source
"},{"location":"faq/#56-q-what-is-the-public-key-for-the-default-public-channel","title":"5.6. Q: what is the public key for the default public channel?","text":"A: The smartphone app key is in hex: 8b3387e9c5cdea6ac9e5edbaa115cd72
T-Deck uses the same key but in base64 izOH6cXN6mrJ5e26oRXNcg== The third character is the capital letter 'O', not zero 0 Source
A: Most of the firmware is freely available. Everything is open source except the T-Deck firmware and Liam's native mobile apps. - Firmware repo: https://github.com/meshcore-dev/MeshCore
"},{"location":"faq/#58-q-how-can-i-support-meshcore","title":"5.8. Q: How can I support MeshCore?","text":"A: Provide your honest feedback on GitHub and on MeshCore Discord server. Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at https://buymeacoffee.com/ripplebiz.
Support Liam Cottle's smartphone client development by unlocking the server administration wait gate with in-app purchase
Support Rastislav Vysoky (recrof)'s flasher web site and the map web site development through PayPal or Revolut
"},{"location":"faq/#59-q-how-do-i-build-meshcore-firmware-from-source","title":"5.9. Q: How do I build MeshCore firmware from source?","text":"A: See instructions here: https://discord.com/channels/826570251612323860/1330643963501351004/1341826372120608769
Build instructions for MeshCore:
For Windows, first install WSL and Python+pip via: https://plainenglish.io/blog/setting-up-python-on-windows-subsystem-for-linux-wsl-26510f1b2d80
(Linux, Windows+WSL) In the terminal/shell:
sudo apt update\nsudo apt install libpython3-dev\nsudo apt install python3-venv\nMac: python3 should be already installed.
Then it should be the same for all platforms:
python3 -m venv meshcore\ncd meshcore && source bin/activate\npip install -U platformio\ngit clone https://github.com/ripplebiz/MeshCore.git\ncd MeshCore\nopen platformio.ini and in [arduino_base] edit the LORA_FREQ=867.5 save, then run:
pio run -e RAK_4631_Repeater\nthen you'll find firmware.zip in .pio/build/RAK_4631_Repeater
Andy also has a video on how to build using VS Code: How to build and flash Meshcore repeater firmware | Heltec V3 https://www.youtube.com/watch?v=WJvg6dt13hk (Link referenced in the Discord post)
"},{"location":"faq/#510-q-are-there-other-meshcore-related-open-source-projects","title":"5.10. Q: Are there other MeshCore related open source projects?","text":"A: Liam Cottle's MeshCore web client and MeshCore Javascript library are open source under MIT license.
Web client: https://github.com/liamcottle/meshcore-web Javascript: https://github.com/liamcottle/meshcore.js
"},{"location":"faq/#511-q-does-meshcore-support-atak","title":"5.11. Q: Does MeshCore support ATAK","text":"A: ATAK is not currently on MeshCore's roadmap.
Meshcore would not be best suited to ATAK because MeshCore: clients do not repeat and therefore you would need a network of repeaters in place will not have a stable path where all clients are constantly moving between repeaters
MeshCore clients would need to reset path constantly and flood traffic across the network which could lead to lots of collisions with something as chatty as ATAK.
This could change in the future if MeshCore develops a client firmware that repeats. Source
"},{"location":"faq/#512-q-how-do-i-add-a-node-to-the-meshcore-map","title":"5.12. Q: How do I add a node to the MeshCore Map","text":"A:
To add a BLE Companion radio, connect to the BLE Companion radio from the MeshCore smartphone app. In the app, tap the 3 dot menu icon at the top right corner, then tap Internet Map. Tap the 3 dot menu icon again and choose Add me to the Map
To add a Repeater or Room Server to the map, go to the Contact List, tap the 3 dot next to the Repeater or Room Server you want to add to the Internet Map, tap Share, then tap Upload to Internet Map.
You can use the same companion (same public key) that you used to add your repeaters or room servers to remove them from the Internet Map.
"},{"location":"faq/#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio","title":"5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?","text":"** A:** Yes. Below are the instructions to flash firmware onto a supported LoRa device using a Raspberry Pi over USB serial.
Instructions for nRF devices like RAK, T1000-E, T114 are immediately after the ESP instructions
For ESP-based devices (e.g. Heltec V3) you need: - Download firmware file from flasher.meshcore.co.uk - Go to the web site on a browser, find the section that has the firmware up need - Click the Download button, right click on the file you need, for example, - Heltec_V3_companion_radio_ble-v1.7.1-165fb33.bin - Non-merged bin keeps the existing Bluetooth pairing database - Heltec_v3_companion_radio_usb-v1.7.1-165fb33-merged.bin - Merged bin overwrites everything including the bootloader, existing Bluetooth pairing database, but keeps configurations. - Right click on the file name and copy the link and note it for later use here is an example: https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin - Run: - wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, merged bin or non-merged bin - If the above wget command only downloads a very small file (10K bytes instead of more than 100K byte, use this command instead: - wget --user-agent=\"Mozilla/5.0\" --content-disposition \"https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_usb-v1.7.1-165fb33.bin\" - Confirm the ttyXXXX device path on your Raspberry Pi: - Go to /dev directory, run ls command to find confirm your device path - They are usually /dev/ttyUSB0 for ESP devices - For ESP-based devices, install esptool from the shell: - pip install esptool --break-system-packages - To flash, use the following command: - For non-merged bin: - esptool.py -p /dev/ttyUSB0 --chip esp32-s3 write_flash 0x10000 <non-merged_firmware>.bin - For merged bin: - esptool.py -p /dev/ttyUSB0 --chip esp32-s3 write_flash 0x00000 <merged_firmware>.bin
Instructions for nRF devices:
For nRF devices (e.g. RAK, Heltec T114) you need the following: - Download firmware file from flasher.meshcore.co.uk - Go to the web site on a browser, find the section that has the firmware up need - You need the ZIP version for the adafruit flash tool (below) - Click the Download button, right click on the ZIP file, for example: - RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip - Right click on the file name and copy the link and note it for later use here is an example: https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip - Run: - wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, ZIP file only - Confirm the ttyXXXX device path on your Raspberry Pi: - Go to /dev directory, run ls command to find confirm your device path - They are usually /dev/ttyACM0 for nRF devices - For nRF-based devices, install adafruit-nrfutil - pip install adafruit-nrfutil --break-system-packages - Use this command to flash the nRF device: - adafruit-nrfutil --verbose dfu serial --package RAK_4631_companion_radio_usb-v1.7.1-165fb33.zip -p /dev/ttyACM0 -b 115200 --singlebank --touch 1200
To manage a repeater or room server connected to a Pi over USB serial using shell commands, you need to install picocom. To install picocom, run the following command: - sudo apt install picocom
To start managing your USB serial-connected device using picocom, use the following command: - picocom -b 115200 /dev/ttyUSB0 --imap lfcrlf
From here, reference repeater and room server command line commands on MeshCore github wiki here: - https://github.com/meshcore-dev/MeshCore/wiki/Repeater-&-Room-Server-CLI-Reference
"},{"location":"faq/#514-q-are-there-are-projects-built-around-meshcore","title":"5.14. Q: Are there are projects built around MeshCore?","text":"A: Yes. See the following:
"},{"location":"faq/#5141-meshcoremqtt","title":"5.14.1. meshcoremqtt","text":"A Python script to send meshcore debug and packet capture data to MQTT for analysis. Cisien's version is a fork of Andrew-a-g's and is being used to to collect data for https://map.w0z.is/messages and https://analyzer.letsmesh.net/ https://github.com/Cisien/meshcoretomqtt https://github.com/Andrew-a-g/meshcoretomqtt
"},{"location":"faq/#5142-meshcore-for-home-assistant","title":"5.14.2. MeshCore for Home Assistant","text":"A custom Home Assistant integration for MeshCore mesh radio nodes. It allows you to monitor and control MeshCore nodes via USB, BLE, or TCP connections. https://github.com/awolden/meshcore-ha
"},{"location":"faq/#5143-python-meshcore","title":"5.14.3. Python MeshCore","text":"Bindings to access your MeshCore companion radio nodes in python. https://github.com/fdlamotte/meshcore_py
"},{"location":"faq/#5144-meshcore-cli","title":"5.14.4. meshcore-cli","text":"CLI interface to MeshCore companion radio over BLE, TCP, or serial. Uses Python MeshCore above. https://github.com/fdlamotte/meshcore-cli
"},{"location":"faq/#5145-meshcorejs","title":"5.14.5. meshcore.js","text":"A JavaScript library for interacting with a MeshCore device running the companion radio firmware https://github.com/liamcottle/meshcore.js
"},{"location":"faq/#5146-pymc_core","title":"5.14.6. pyMC_core","text":"pyMC_Core is a Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI. https://github.com/rightup/pyMC_core
"},{"location":"faq/#5147-meshcore-packet-decoder","title":"5.14.7. MeshCore Packet Decoder","text":"A TypeScript library for decoding MeshCore mesh networking packets with full cryptographic support. Uses WebAssembly (WASM) for Ed25519 key derivation through the orlp/ed25519 library. It powers the MeshCore Packet Analyzer. https://github.com/michaelhart/meshcore-decoder
"},{"location":"faq/#5148-meshcore-pi","title":"5.14.8. meshcore-pi","text":"meshcore-pi is another Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI or GPIO. https://github.com/brianwiddas/meshcore-pi
"},{"location":"faq/#5149-pymc_repeater","title":"5.14.9. pyMC_Repeater","text":"pyMC_Repeater is a repeater daemon in Python built on top of the pymc_core library. https://github.com/rightup/pyMC_Repeater
A: Yes, the same iOS and Android client is also available for Windows and Intel Mac (sorry, not available for ARM-based Mac yet). You can find them together with the Android APK here: https://files.liamcottle.net/MeshCore
Both the Windows and Intel Mac versions of the client app are fully unlocked and are free to use.
"},{"location":"faq/#516-q-are-there-any-resources-that-compare-meshcore-to-other-lora-systems","title":"5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?","text":"A: Here is a list of MeshCore comparison resources: The Comms Channel on YouTube: https://www.youtube.com/watch?v=guDoKGs02Us MeshCore Advantages by MCarper: https://github.com/mikecarper/meshfirmware/blob/main/MeshCoreAdvantages.md Meshcore vs Meshtastic by austinmesh.org https://www.austinmesh.org/learn/meshcore-vs-meshtastic/
"},{"location":"faq/#6-troubleshooting","title":"6. Troubleshooting","text":""},{"location":"faq/#61-q-my-client-says-another-client-or-a-repeater-or-a-room-server-was-last-seen-many-many-days-ago","title":"6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.","text":""},{"location":"faq/#62-q-a-repeater-or-a-client-or-a-room-server-i-expect-to-see-on-my-discover-list-on-t-deck-or-contact-list-on-a-smart-device-client-are-not-listed","title":"6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.","text":"A: - If your client is a T-Deck, it may not have its time set (no GPS installed, no GPS lock, or wrong GPS baud rate). - If you are using the Android or iOS client, the other client, repeater, or room server may have the wrong time.
You can get the epoch time on https://www.epochconverter.com/ and use it to set your T-Deck clock. For a repeater and room server, the admin can use a T-Deck to remotely set their clock (clock sync), or use the time command in the USB serial console with the server device connected.
A: You can't connect to a device running repeater firmware via Bluetooth. Devices running the BLE companion firmware you can connect to it via Bluetooth using the android app
"},{"location":"faq/#64-q-my-companion-isnt-showing-up-over-bluetooth","title":"6.4. Q: My companion isn't showing up over Bluetooth?","text":"A: make sure that you flashed the Bluetooth companion firmware and not the USB-only companion firmware.
"},{"location":"faq/#65-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code","title":"6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?","text":"A: the default Bluetooth pairing code is 123456
A: Heltec V3 has a very small coil antenna on its PCB for Wi-Fi and Bluetooth connectivity. It has a very short range, only a few feet. It is possible to remove the coil antenna and replace it with a 31mm wire. The BT range is much improved with the modification.
"},{"location":"faq/#67-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh","title":"6.7. Q: My RAK/T1000-E/xiao_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?","text":"A: 1. Connect USB-C cable to your device, per your device's instruction, get it to flash mode: - For RAK, click the reset button TWICE - For T1000-e, quickly disconnect and reconnect the magnetic side of the cable from the device TWICE - For Heltec T114, click the reset button TWICE (the bottom button) - For Xiao nRF52, click the reset button once. If that doesn't work, quickly double click the reset button twice. If that doesn't work, disconnection the board from your PC and reconnect again (seeed studio wiki) 5. A new folder will appear on your computer's desktop 6. Download the flash_erase*.uf2 file for your device on flasher.meshcore.co.uk - RAK WisBlock and Heltec T114: Flash_erase-nRF32_softdevice_v6.uf2 - Seeed Studio Xiao nRF52 WIO: Flash_erase-nRF52_softdevice_v7.uf2 8. drag and drop the uf2 file for your device to the root of the new folder 9. Wait for the copy to complete. You might get an error dialog, you can ignore it 10. Go to https://flasher.meshcore.co.uk/, click Console and select the serial port for your connected device 11. In the console, press enter. Your flash should now be erased 12. You may now flash the latest MeshCore firmware onto your device
Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode. If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot. Then you can use the 'Console' on flasher.meshcore.co.uk
"},{"location":"faq/#68-q-webflasher-fails-on-linux-with-failed-to-open","title":"6.8. Q: WebFlasher fails on Linux with failed to open","text":"A: If the usb port doesn't have the right ownership for this task, the process fails with the following error: NetworkError: Failed to execute 'open' on 'SerialPort': Failed to open serial port.
Allow the browser user on it: # setfacl -m u:YOUR_USER_HERE:rw /dev/ttyUSB0
A: The steps below work on both Android and iOS as nRF has made both apps' user interface the same on both platforms:
nrf dfu, the app's full name is nRF Device Firmware Updatestart ota and hit enter.OK to confirm the repeater device is now in OTA modeSettings on the top right cornerPackets receipt notifications, and change Number of Packets to 10 for RAK, 8 for T114. 8 also works for RAK.OTA on the device againForce Scanning in the DFU appUpload to begin OTA updateA: You can flash this safer bootloader to the Wio Tracker L1 Pro https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX
After this bootloader is flashed onto the device, you can trigger over the air update using bluetooth by holding the button next to the D-Pad and then click the reset button. The follow the same OTA update instructions above. You can skip pass the start ota instruction and start the update using the DFU app.
A: For ESP32-based devices (e.g. Heltec V3): 1. On flasher.meshcore.co.uk, download the non-merged version of the firmware for your ESP32 device (e.g. Heltec_v3_repeater-v1.6.2-4449fd3.bin, no \"merged\" in the file name) 2. From the MeshCore app, login remotely to the repeater you want to update with admin privilege 4. Go to the Command Line tab, type start ota and hit enter. 5. you should see OK to confirm the repeater device is now in OTA mode 6. The command start ota on an ESP32-based device starts a wifi hotspot named MeshCore OTA 7. From your phone or computer connect to the 'MeshCore OTA' hotspot 8. From a browser, go to http://192.168.4.1/update and upload the non-merged bin from the flasher
A: Yes, developer che aporeps has an enhanced OTA DFU bootloader for nRF52 based devices. With this bootloader, if it detects that the application firmware is invalid, it falls back to OTA DFU mode so you can attempt to flash again to recover. This bootloader has other changes to make the OTA DFU process more fault tolerant.
Refer to https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX for the latest information.
Currently, the following boards are supported: - Heltec Automation Mesh Node T114 / HT-nRF5262 - Nologo ProMicro NRF52840 (aka SuperMini NRF52840) - Seeed Studio SenseCAP Card Tracker T1000-E - Seeed Studio Wio Tracker L1 - Seeed Studio XIAO nRF52840 BLE - Seeed Studio XIAO nRF52840 BLE SENSE - RAK 4631 (See note) - RAK WisMesh Tag (new 28/11/2025)
"},{"location":"faq/#74-q-are-the-meshcore-logo-and-font-available","title":"7.4. Q: are the MeshCore logo and font available?","text":"A: Yes, it is on the MeshCore github repo here: https://github.com/meshcore-dev/MeshCore/tree/main/logo
"},{"location":"faq/#75-q-what-is-the-format-of-a-contact-or-channel-qr-code","title":"7.5. Q: What is the format of a contact or channel QR code?","text":"A: Channel: meshcore://channel/add?name=<name>&secret=<secret>
Contact: meshcore://contact/add?name=<name>&public_key=<secret>&type=<type>
where &type is: chat = 1 repeater = 2 room = 3 sensor = 4
A: WiFi firmware requires you to compile it yourself, as you need to set the wifi ssid and password. Edit WIFI_SSID and WIFI_PWD in ./variants/heltec_v3/platformio.ini and then flash it to your device.
A: For companion radios, you can set these radios' transmit power in the smartphone app. For repeater and room server radios, you can set their transmit power using the command line command set tx. You can get their current value using command line comand get tx
Standard KISS TNC firmware for MeshCore LoRa radios. Compatible with any KISS client (Direwolf, APRSdroid, YAAC, etc.) for sending and receiving raw packets. MeshCore-specific extensions (cryptography, radio configuration, telemetry) are available through the standard SetHardware (0x06) command.
"},{"location":"kiss_modem_protocol/#serial-configuration","title":"Serial Configuration","text":"115200 baud, 8N1, no flow control.
"},{"location":"kiss_modem_protocol/#frame-format","title":"Frame Format","text":"Standard KISS framing per the KA9Q/K3MC specification.
Byte Name Description0xC0 FEND Frame delimiter 0xDB FESC Escape character 0xDC TFEND Escaped FEND (FESC + TFEND = 0xC0) 0xDD TFESC Escaped FESC (FESC + TFESC = 0xDB) \u250c\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2510\n\u2502 FEND \u2502 Type Byte \u2502 Data (escaped)\u2502 FEND \u2502\n\u2502 0xC0 \u2502 1 byte \u2502 0-510 bytes \u2502 0xC0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nThe type byte is split into two nibbles:
Bits Field Description 7-4 Port Port number (0 for single-port TNC) 3-0 Command Command numberMaximum unescaped frame size: 512 bytes.
"},{"location":"kiss_modem_protocol/#standard-kiss-commands","title":"Standard KISS Commands","text":""},{"location":"kiss_modem_protocol/#host-to-tnc","title":"Host to TNC","text":"Command Value Data Description Data0x00 Raw packet Queue packet for transmission TXDELAY 0x01 Delay (1 byte) Transmitter keyup delay in 10ms units (default: 50 = 500ms) Persistence 0x02 P (1 byte) CSMA persistence parameter 0-255 (default: 63) SlotTime 0x03 Interval (1 byte) CSMA slot interval in 10ms units (default: 10 = 100ms) TXtail 0x04 Delay (1 byte) Post-TX hold time in 10ms units (default: 0) FullDuplex 0x05 Mode (1 byte) 0 = half duplex, nonzero = full duplex (default: 0) SetHardware 0x06 Sub-command + data MeshCore extensions (see below) Return 0xFF - Exit KISS mode (no-op)"},{"location":"kiss_modem_protocol/#tnc-to-host","title":"TNC to Host","text":"Type Value Data Description Data 0x00 Raw packet Received packet from radio Data frames carry raw packet data only, with no metadata prepended. The Data command payload is limited to 255 bytes to match the MeshCore maximum transmission unit (MAX_TRANS_UNIT); frames larger than 255 bytes are silently dropped. The KISS specification recommends at least 1024 bytes for general-purpose TNCs; this modem is intended for MeshCore packets only, whose protocol MTU is 255 bytes.
"},{"location":"kiss_modem_protocol/#csma-behavior","title":"CSMA Behavior","text":"The TNC implements p-persistent CSMA for half-duplex operation:
In full-duplex mode, CSMA is bypassed and packets transmit after TXDELAY.
"},{"location":"kiss_modem_protocol/#sethardware-extensions-0x06","title":"SetHardware Extensions (0x06)","text":"MeshCore-specific functionality uses the standard KISS SetHardware command. The first byte of SetHardware data is a sub-command. Standard KISS clients ignore these frames.
"},{"location":"kiss_modem_protocol/#frame-format_1","title":"Frame Format","text":"\u250c\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2510\n\u2502 FEND \u2502 0x06 \u2502 Sub-command \u2502 Data (escaped)\u2502 FEND \u2502\n\u2502 0xC0 \u2502 \u2502 1 byte \u2502 variable \u2502 0xC0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n0x01 - GetRandom 0x02 Length (1 byte, 1-64) VerifySignature 0x03 PubKey (32) + Signature (64) + Data SignData 0x04 Data to sign EncryptData 0x05 Key (32) + Plaintext DecryptData 0x06 Key (32) + MAC (2) + Ciphertext KeyExchange 0x07 Remote PubKey (32) Hash 0x08 Data to hash SetRadio 0x09 Freq (4) + BW (4) + SF (1) + CR (1) SetTxPower 0x0A Power dBm (1) GetRadio 0x0B - GetTxPower 0x0C - GetCurrentRssi 0x0D - IsChannelBusy 0x0E - GetAirtime 0x0F Packet length (1) GetNoiseFloor 0x10 - GetVersion 0x11 - GetStats 0x12 - GetBattery 0x13 - GetMCUTemp 0x14 - GetSensors 0x15 Permissions (1) GetDeviceName 0x16 - Ping 0x17 - Reboot 0x18 - SetSignalReport 0x19 Enable (1): 0x00=disable, nonzero=enable GetSignalReport 0x1A -"},{"location":"kiss_modem_protocol/#response-sub-commands-tnc-to-host","title":"Response Sub-commands (TNC to Host)","text":"Response codes use the high-bit convention: response = command | 0x80. Generic and unsolicited responses use the 0xF0+ range.
0x81 PubKey (32) Random 0x82 Random bytes (1-64) Verify 0x83 Result (1): 0x00=invalid, 0x01=valid Signature 0x84 Signature (64) Encrypted 0x85 MAC (2) + Ciphertext Decrypted 0x86 Plaintext SharedSecret 0x87 Shared secret (32) Hash 0x88 SHA-256 hash (32) Radio 0x8B Freq (4) + BW (4) + SF (1) + CR (1) TxPower 0x8C Power dBm (1) CurrentRssi 0x8D RSSI dBm (1, signed) ChannelBusy 0x8E Result (1): 0x00=clear, 0x01=busy Airtime 0x8F Milliseconds (4) NoiseFloor 0x90 dBm (2, signed) Version 0x91 Version (1) + Reserved (1) Stats 0x92 RX (4) + TX (4) + Errors (4) Battery 0x93 Millivolts (2) MCUTemp 0x94 Temperature (2, signed) Sensors 0x95 CayenneLPP payload DeviceName 0x96 Name (variable, UTF-8) Pong 0x97 - SignalReport 0x9A Status (1): 0x00=disabled, 0x01=enabled OK 0xF0 - Error 0xF1 Error code (1) TxDone 0xF8 Result (1): 0x00=failed, 0x01=success RxMeta 0xF9 SNR (1) + RSSI (1)"},{"location":"kiss_modem_protocol/#error-codes","title":"Error Codes","text":"Code Value Description InvalidLength 0x01 Request data too short InvalidParam 0x02 Invalid parameter value NoCallback 0x03 Feature not available MacFailed 0x04 MAC verification failed UnknownCmd 0x05 Unknown sub-command EncryptFailed 0x06 Encryption failed"},{"location":"kiss_modem_protocol/#unsolicited-events","title":"Unsolicited Events","text":"The TNC sends these SetHardware frames without a preceding request:
TxDone (0xF8): Sent after a packet has been transmitted. Contains a single byte: 0x01 for success, 0x00 for failure.
RxMeta (0xF9): Sent immediately after each standard data frame (type 0x00) with metadata for the received packet. Contains SNR (1 byte, signed, value x4 for 0.25 dB precision) followed by RSSI (1 byte, signed, dBm). Enabled by default; can be toggled with SetSignalReport. Standard KISS clients ignore this frame.
"},{"location":"kiss_modem_protocol/#data-formats","title":"Data Formats","text":""},{"location":"kiss_modem_protocol/#radio-parameters-setradio-radio-response","title":"Radio Parameters (SetRadio / Radio response)","text":"All values little-endian.
Field Size Description Frequency 4 bytes Hz (e.g., 869618000) Bandwidth 4 bytes Hz (e.g., 62500) SF 1 byte Spreading factor (5-12) CR 1 byte Coding rate (5-8)"},{"location":"kiss_modem_protocol/#version-version-response","title":"Version (Version response)","text":"Field Size Description Version 1 byte Firmware version Reserved 1 byte Always 0"},{"location":"kiss_modem_protocol/#encrypted-encrypted-response","title":"Encrypted (Encrypted response)","text":"Field Size Description MAC 2 bytes HMAC-SHA256 truncated to 2 bytes Ciphertext variable AES-128-CBC encrypted data"},{"location":"kiss_modem_protocol/#airtime-airtime-response","title":"Airtime (Airtime response)","text":"All values little-endian.
Field Size Description Airtime 4 bytes uint32_t, estimated air time in milliseconds"},{"location":"kiss_modem_protocol/#noise-floor-noisefloor-response","title":"Noise Floor (NoiseFloor response)","text":"All values little-endian.
Field Size Description Noise floor 2 bytes int16_t, dBm (signed)The modem recalibrates the noise floor every 2 seconds with an AGC reset every 30 seconds.
"},{"location":"kiss_modem_protocol/#stats-stats-response","title":"Stats (Stats response)","text":"All values little-endian.
Field Size Description RX 4 bytes Packets received TX 4 bytes Packets transmitted Errors 4 bytes Receive errors"},{"location":"kiss_modem_protocol/#battery-battery-response","title":"Battery (Battery response)","text":"All values little-endian.
Field Size Description Millivolts 2 bytes uint16_t, battery voltage in mV"},{"location":"kiss_modem_protocol/#mcu-temperature-mcutemp-response","title":"MCU Temperature (MCUTemp response)","text":"All values little-endian.
Field Size Description Temperature 2 bytes int16_t, tenths of \u00b0C (e.g., 253 = 25.3\u00b0C)Returns NoCallback error if the board does not support temperature readings.
Sends an OK response, flushes serial, then reboots the device. The host should expect the connection to drop.
0x01 Base (battery) 1 0x02 Location (GPS) 2 0x04 Environment (temp, humidity, pressure) Use 0x07 for all permissions.
Data returned in CayenneLPP format. See CayenneLPP documentation for parsing.
"},{"location":"kiss_modem_protocol/#cryptographic-algorithms","title":"Cryptographic Algorithms","text":"Operation Algorithm Identity / Signing / Verification Ed25519 Key Exchange X25519 (ECDH) Encryption AES-128-CBC + HMAC-SHA256 (MAC truncated to 2 bytes) Hashing SHA-256"},{"location":"kiss_modem_protocol/#notes","title":"Notes","text":"The nRF52 Power Management module provides battery protection features to prevent over-discharge, minimise likelihood of brownout and flash corruption conditions existing, and enable safe voltage-based recovery.
"},{"location":"nrf52_power_management/#features","title":"Features","text":""},{"location":"nrf52_power_management/#boot-voltage-protection","title":"Boot Voltage Protection","text":"Shutdown reason codes (stored in GPREGRET2): | Code | Name | Description | |------|------|-------------| | 0x00 | NONE | Normal boot / no previous shutdown | | 0x4C | LOW_VOLTAGE | Runtime low voltage threshold reached | | 0x55 | USER | User requested powerOff() | | 0x42 | BOOT_PROTECT | Boot voltage protection triggered |
"},{"location":"nrf52_power_management/#supported-boards","title":"Supported Boards","text":"Board Implemented LPCOMP wake VBUS wake Seeed Studio XIAO nRF52840 (xiao_nrf52) Yes Yes Yes RAK4631 (rak4631) Yes Yes Yes Heltec T114 (heltec_t114) Yes Yes Yes Promicro nRF52840 No No No RAK WisMesh Tag No No No Heltec Mesh Solar No No No LilyGo T-Echo / T-Echo Lite No No No SenseCAP Solar No No No WIO Tracker L1 / L1 E-Ink No No No WIO WM1110 No No No Mesh Pocket No No No Nano G2 Ultra No No No ThinkNode M1/M3/M6 No No No T1000-E No No No Ikoka Nano/Stick/Handheld (nRF) No No No Keepteen LT1 No No No Minewsemi ME25LS01 No No No Notes: - \"Implemented\" reflects Phase 1 (boot lockout + shutdown reason capture). - User power-off on Heltec T114 does not enable LPCOMP wake. - VBUS detection is used to skip boot lockout on external power, and VBUS wake is configured alongside LPCOMP when supported hardware exposes VBUS to the nRF52.
"},{"location":"nrf52_power_management/#technical-details","title":"Technical Details","text":""},{"location":"nrf52_power_management/#architecture","title":"Architecture","text":"The power management functionality is integrated into the NRF52Board base class in src/helpers/NRF52Board.cpp. Board variants provide hardware-specific configuration via a PowerMgtConfig struct and override initiateShutdown(uint8_t reason) to perform board-specific power-down work and conditionally enable voltage wake (LPCOMP + VBUS).
A static constructor with priority 101 in NRF52Board.cpp captures the RESETREAS and GPREGRET2 registers before: - SystemInit() (priority 102) - which clears RESETREAS - Static C++ constructors (default priority 65535)
This ensures we capture the true reset reason before any initialisation code runs.
"},{"location":"nrf52_power_management/#board-implementation","title":"Board Implementation","text":"To enable power management on a board variant:
Enable in platformio.ini: ini -D NRF52_POWER_MANAGEMENT
Define configuration in variant.h: c #define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV) #define PWRMGT_LPCOMP_AIN 7 // AIN channel for voltage sensing #define PWRMGT_LPCOMP_REFSEL 2 // REFSEL (0-6=1/8..7/8, 7=ARef, 8-15=1/16..15/16)
Implement in board .cpp file: ```cpp #ifdef NRF52_POWER_MANAGEMENT const PowerMgtConfig power_config = { .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN, .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL, .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK };
void MyBoard::initiateShutdown(uint8_t reason) { // Board-specific shutdown preparation (e.g., disable peripherals) bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE || reason == SHUTDOWN_REASON_BOOT_PROTECT);
if (enable_lpcomp) {\n configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);\n }\n\n enterSystemOff(reason);\n} #endif
void MyBoard::begin() { NRF52Board::begin(); // or NRF52BoardDCDC::begin() // ... board setup ...
#ifdef NRF52_POWER_MANAGEMENT checkBootVoltage(&power_config); #endif } ```
For user-initiated shutdowns, powerOff() remains board-specific. Power management only arms LPCOMP for automated shutdown reasons (boot protection/low voltage).
cpp #ifdef NRF52_POWER_MANAGEMENT void initiateShutdown(uint8_t reason) override; #endifThe LPCOMP (Low Power Comparator) is configured to: - Monitor the specified AIN channel (0-7 corresponding to P0.02-P0.05, P0.28-P0.31) - Compare against VDD fraction reference (REFSEL: 0-6=1/8..7/8, 7=ARef, 8-15=1/16..15/16) - Detect UP events (voltage rising above threshold) - Use 50mV hysteresis for noise immunity - Wake the device from SYSTEMOFF when triggered
VBUS wake is enabled via the POWER peripheral USBDETECTED event whenever configureVoltageWake() is used. This requires USB VBUS to be routed to the nRF52 (typical on nRF52840 boards with native USB).
LPCOMP Reference Selection (PWRMGT_LPCOMP_REFSEL): | REFSEL | Fraction | VBAT @ 1M/1M divider (VDD=3.0-3.3) | VBAT @ 1.5M/1M divider (VDD=3.0-3.3) | |--------|----------|------------------------------------|--------------------------------------| | 0 | 1/8 | 0.75-0.82 V | 0.94-1.03 V | | 1 | 2/8 | 1.50-1.65 V | 1.88-2.06 V | | 2 | 3/8 | 2.25-2.47 V | 2.81-3.09 V | | 3 | 4/8 | 3.00-3.30 V | 3.75-4.12 V | | 4 | 5/8 | 3.75-4.12 V | 4.69-5.16 V | | 5 | 6/8 | 4.50-4.95 V | 5.62-6.19 V | | 6 | 7/8 | 5.25-5.77 V | 6.56-7.22 V | | 7 | ARef | - | - | | 8 | 1/16 | 0.38-0.41 V | 0.47-0.52 V | | 9 | 3/16 | 1.12-1.24 V | 1.41-1.55 V | | 10 | 5/16 | 1.88-2.06 V | 2.34-2.58 V | | 11 | 7/16 | 2.62-2.89 V | 3.28-3.61 V | | 12 | 9/16 | 3.38-3.71 V | 4.22-4.64 V | | 13 | 11/16 | 4.12-4.54 V | 5.16-5.67 V | | 14 | 13/16 | 4.88-5.36 V | 6.09-6.70 V | | 15 | 15/16 | 5.62-6.19 V | 7.03-7.73 V |
Important: For boards with a voltage divider on the battery sense pin, LPCOMP measures the divided voltage. Use: VBAT_threshold \u2248 (VDD * fraction) * divider_scale, where divider_scale = (Rtop + Rbottom) / Rbottom (e.g., 2.0 for 1M/1M, 2.5 for 1.5M/1M, 3.0 for XIAO).
The power management code checks whether SoftDevice is enabled and uses the appropriate API: - When SD enabled: sd_power_* functions - When SD disabled: Direct register access (NRF_POWER->*)
This ensures compatibility regardless of BLE stack state.
"},{"location":"nrf52_power_management/#cli-commands","title":"CLI Commands","text":"Power management status can be queried via the CLI:
Command Descriptionget pwrmgt.support Returns \"supported\" or \"unsupported\" get pwrmgt.source Returns current power source - \"battery\" or \"external\" (5V/USB power) get pwrmgt.bootreason Returns reset and shutdown reason strings get pwrmgt.bootmv Returns boot voltage in millivolts On boards without power management enabled, all commands except get pwrmgt.support return:
ERROR: Power management not supported\nWhen MESH_DEBUG=1 is enabled, the power management module outputs:
DEBUG: PWRMGT: Reset = Wake from LPCOMP (0x20000); Shutdown = Low Voltage (0x4C)\nDEBUG: PWRMGT: Boot voltage = 3450 mV (threshold = 3300 mV)\nDEBUG: PWRMGT: LPCOMP wake configured (AIN7, ref=3/8 VDD)\nThis document describes the MeshCore packet format.
0xYY indicates YY in hex notation.0bYY indicates YY in binary notation.0000000XX0000000This is the protocol level packet structure used in MeshCore firmware v1.12.0
[header][transport_codes(optional)][path_length][path][payload]\n0bVVPPPPRR - V=Version - P=PayloadType - R=RouteType0x00/0b00 - ROUTE_TYPE_TRANSPORT_FLOOD - Flood Routing + Transport Codes0x01/0b01 - ROUTE_TYPE_FLOOD - Flood Routing0x02/0b10 - ROUTE_TYPE_DIRECT - Direct Routing0x03/0b11 - ROUTE_TYPE_TRANSPORT_DIRECT - Direct Routing + Transport Codes0x00/0b0000 - PAYLOAD_TYPE_REQ - Request (destination/source hashes + MAC)0x01/0b0001 - PAYLOAD_TYPE_RESPONSE - Response to REQ or ANON_REQ0x02/0b0010 - PAYLOAD_TYPE_TXT_MSG - Plain text message0x03/0b0011 - PAYLOAD_TYPE_ACK - Acknowledgment0x04/0b0100 - PAYLOAD_TYPE_ADVERT - Node advertisement0x05/0b0101 - PAYLOAD_TYPE_GRP_TXT - Group text message (unverified)0x06/0b0110 - PAYLOAD_TYPE_GRP_DATA - Group datagram (unverified)0x07/0b0111 - PAYLOAD_TYPE_ANON_REQ - Anonymous request0x08/0b1000 - PAYLOAD_TYPE_PATH - Returned path0x09/0b1001 - PAYLOAD_TYPE_TRACE - Trace a path, collecting SNR for each hop0x0A/0b1010 - PAYLOAD_TYPE_MULTIPART - Packet is part of a sequence of packets0x0B/0b1011 - PAYLOAD_TYPE_CONTROL - Control packet data (unencrypted)0x0C/0b1100 - reserved0x0D/0b1101 - reserved0x0E/0b1110 - reserved0x0F/0b1111 - PAYLOAD_TYPE_RAW_CUSTOM - Custom packet (raw bytes, custom encryption)0x00/0b00 - v1 - 1-byte src/dest hashes, 2-byte MAC0x01/0b01 - v2 - Future version (e.g., 2-byte hashes, 4-byte MAC)0x02/0b10 - v3 - Future version0x03/0b11 - v4 - Future versiontransport_codes - 4 bytes (optional)ROUTE_TYPE_TRANSPORT_FLOOD and ROUTE_TYPE_TRANSPORT_DIRECTtransport_code_1 - 2 bytes - uint16_t - calculated from region scopetransport_code_2 - 2 bytes - uint16_t - reservedpath_length - 1 byte - Length of the path field in bytespath - size provided by path_length - Path to use for Direct RoutingMAX_PATH_SIZEpath_length larger than 64payload - variable length - Payload DataMAX_PACKET_PAYLOADpayload sizes larger than 184MAX_PATH_SIZE) Stores the routing path if applicable payload up to 184 (MAX_PACKET_PAYLOAD) Data for the provided Payload Type NOTE: see the Payloads documentation for more information about the content of specific payload types.
"},{"location":"packet_format/#header-format","title":"Header Format","text":"Bit 0 means the lowest bit (1s place)
Bits Mask Field Description 0-10x03 Route Type Flood, Direct, etc 2-5 0x3C Payload Type Request, Response, ACK, etc 6-7 0xC0 Payload Version Versioning of the payload format"},{"location":"packet_format/#route-types","title":"Route Types","text":"Value Name Description 0x00 ROUTE_TYPE_TRANSPORT_FLOOD Flood Routing + Transport Codes 0x01 ROUTE_TYPE_FLOOD Flood Routing 0x02 ROUTE_TYPE_DIRECT Direct Routing 0x03 ROUTE_TYPE_TRANSPORT_DIRECT Direct Routing + Transport Codes"},{"location":"packet_format/#payload-types","title":"Payload Types","text":"Value Name Description 0x00 PAYLOAD_TYPE_REQ Request (destination/source hashes + MAC) 0x01 PAYLOAD_TYPE_RESPONSE Response to REQ or ANON_REQ 0x02 PAYLOAD_TYPE_TXT_MSG Plain text message 0x03 PAYLOAD_TYPE_ACK Acknowledgment 0x04 PAYLOAD_TYPE_ADVERT Node advertisement 0x05 PAYLOAD_TYPE_GRP_TXT Group text message (unverified) 0x06 PAYLOAD_TYPE_GRP_DATA Group datagram (unverified) 0x07 PAYLOAD_TYPE_ANON_REQ Anonymous request 0x08 PAYLOAD_TYPE_PATH Returned path 0x09 PAYLOAD_TYPE_TRACE Trace a path, collecting SNR for each hop 0x0A PAYLOAD_TYPE_MULTIPART Packet is part of a sequence of packets 0x0B PAYLOAD_TYPE_CONTROL Control packet data (unencrypted) 0x0C reserved reserved 0x0D reserved reserved 0x0E reserved reserved 0x0F PAYLOAD_TYPE_RAW_CUSTOM Custom packet (raw bytes, custom encryption)"},{"location":"packet_format/#payload-versions","title":"Payload Versions","text":"Value Version Description 0x00 1 1-byte src/dest hashes, 2-byte MAC 0x01 2 Future version (e.g., 2-byte hashes, 4-byte MAC) 0x02 3 Future version 0x03 4 Future version"},{"location":"payloads/","title":"Payload Format","text":"Inside each MeshCore Packet is a payload, identified by the payload type in the packet header. The types of payloads are:
This document defines the structure of each of these payload types.
NOTE: all 16 and 32-bit integer fields are Little Endian.
"},{"location":"payloads/#important-concepts","title":"Important concepts:","text":"This kind of payload notifies receivers that a node exists, and gives information about the node
Field Size (bytes) Description public key 32 Ed25519 public key of the node timestamp 4 unix timestamp of advertisement signature 64 Ed25519 signature of public key, timestamp, and app data appdata rest of payload optional, see belowAppdata
Field Size (bytes) Description flags 1 specifies which of the fields are present, see below latitude 4 (optional) decimal latitude multiplied by 1000000, integer longitude 4 (optional) decimal longitude multiplied by 1000000, integer feature 1 2 (optional) reserved for future use feature 2 2 (optional) reserved for future use name rest of appdata name of the nodeAppdata Flags
Value Name Description0x01 is chat node advert is for a chat node 0x02 is repeater advert is for a repeater 0x03 is room server advert is for a room server 0x04 is sensor advert is for a sensor server 0x10 has location appdata contains lat/long information 0x20 has feature 1 Reserved for future use. 0x40 has feature 2 Reserved for future use. 0x80 has name appdata contains a node name"},{"location":"payloads/#acknowledgement","title":"Acknowledgement","text":"An acknowledgement that a message was received. Note that for returned path messages, an acknowledgement can be sent in the \"extra\" payload (see Returned Path) instead of as a separate ackowledgement packet. CLI commands do not cause acknowledgement responses, neither discrete nor extra.
Field Size (bytes) Description checksum 4 CRC checksum of message timestamp, text, and sender pubkey"},{"location":"payloads/#returned-path-request-response-and-plain-text-message","title":"Returned path, request, response, and plain text message","text":"Returned path, request, response, and plain text messages are all formatted in the same way. See the subsection for more details about the ciphertext's associated plaintext representation.
Field Size (bytes) Description destination hash 1 first byte of destination node public key source hash 1 first byte of source node public key cipher MAC 2 MAC for encrypted data in next field ciphertext rest of payload encrypted message, see subsections below for details"},{"location":"payloads/#returned-path","title":"Returned path","text":"Returned path messages provide a description of the route a packet took from the original author. Receivers will send returned path messages to the author of the original message.
Field Size (bytes) Description path length 1 length of next field path see above a list of node hashes (one byte each) extra type 1 extra, bundled payload type, eg., acknowledgement or response. Same values as in Packet Format extra rest of data extra, bundled payload content, follows same format as main content defined by this document"},{"location":"payloads/#request","title":"Request","text":"Field Size (bytes) Description timestamp 4 send time (unix timestamp) request type 1 see below request data rest of payload depends on request typeRequest type
Value Name Description0x01 get stats get stats of repeater or room server 0x02 keepalive (deprecated) 0x03 get telemetry data TODO 0x04 get min,max,avg data sensor nodes - get min, max, average for given time span 0x05 get access list get node's approved access list 0x06 get neighbors get repeater node's neighbors 0x07 get owner info get repeater firmware-ver/name/owner info"},{"location":"payloads/#get-stats","title":"Get stats","text":"Gets information about the node, possibly including the following:
Request data about sensors on the node, including battery level.
"},{"location":"payloads/#get-telemetry","title":"Get Telemetry","text":"TODO
"},{"location":"payloads/#get-minmaxave-sensor-nodes","title":"Get Min/Max/Ave (Sensor nodes)","text":"TODO
"},{"location":"payloads/#get-access-list","title":"Get Access List","text":"TODO
"},{"location":"payloads/#get-neighors","title":"Get Neighors","text":"TODO
"},{"location":"payloads/#get-owner-info","title":"Get Owner Info","text":"TODO
"},{"location":"payloads/#response","title":"Response","text":"Field Size (bytes) Description tag 4 TODO content rest of payload TODO"},{"location":"payloads/#plain-text-message","title":"Plain text message","text":"Field Size (bytes) Description timestamp 4 send time (unix timestamp) txt_type + attempt 1 upper six bits are txt_type (see below), lower two bits are attempt number (0..3) message rest of payload the message content, see next tabletxt_type
Value Description Message content0x00 plain text message the plain text of the message 0x01 CLI command the command text of the message 0x02 signed plain text message first four bytes is sender pubkey prefix, followed by plain text message"},{"location":"payloads/#anonymous-request","title":"Anonymous request","text":"Field Size (bytes) Description destination hash 1 first byte of destination node public key public key 32 sender's Ed25519 public key cipher MAC 2 MAC for encrypted data in next field ciphertext rest of payload encrypted message, see below for details"},{"location":"payloads/#room-server-login","title":"Room server login","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) sync timestamp 4 sender's \"sync messages SINCE x\" timestamp password rest of message password for room"},{"location":"payloads/#repeatersensor-login","title":"Repeater/Sensor login","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) password rest of message password for repeater/sensor"},{"location":"payloads/#repeater-regions-request","title":"Repeater - Regions request","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) req type 1 0x01 (request sub type) reply path len 1 path len for reply reply path (variable) reply path"},{"location":"payloads/#repeater-owner-info-request","title":"Repeater - Owner info request","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) req type 1 0x02 (request sub type) reply path len 1 path len for reply reply path (variable) reply path"},{"location":"payloads/#repeater-clock-and-status-request","title":"Repeater - Clock and status request","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) req type 1 0x03 (request sub type) reply path len 1 path len for reply reply path (variable) reply path"},{"location":"payloads/#group-text-message-datagram","title":"Group text message / datagram","text":"Field Size (bytes) Description channel hash 1 first byte of SHA256 of channel's shared key cipher MAC 2 MAC for encrypted data in next field ciphertext rest of payload encrypted message, see below for details The plaintext contained in the ciphertext matches the format described in plain text message. Specifically, it consists of a four byte timestamp, a flags byte, and the message. The flags byte will generally be 0x00 because it is a \"plain text message\". The message will be of the form <sender name>: <message body> (eg., user123: I'm on my way).
Custom packets have no defined format.
"},{"location":"qr_codes/","title":"QR Codes","text":"This document provides an overview of QR Code formats that can be used for sharing MeshCore channels and contacts. The formats described below are supported by the MeshCore mobile app.
"},{"location":"qr_codes/#add-channel","title":"Add Channel","text":"Example URL:
meshcore://channel/add?name=Public&secret=8b3387e9c5cdea6ac9e5edbaa115cd72\nParameters:
name: Channel name (URL-encoded if needed)secret: 16-byte secret represented as 32 hex charactersExample URL:
meshcore://contact/add?name=Example+Contact&public_key=9cd8fcf22a47333b591d96a2b848b73f457b1bb1a3ea2453a885f9e5787765b1&type=1\nParameters:
name: Contact name (URL-encoded if needed)public_key: 32-byte public key represented as 64 hex characterstype: numeric contact type1: Companion2: Repeater3: Room Server4: SensorBinary frame structures for companion radio stats commands. All multi-byte integers use little-endian byte order.
"},{"location":"stats_binary_frames/#command-codes","title":"Command Codes","text":"Command Code DescriptionCMD_GET_STATS 56 Get statistics (2-byte command: code + sub-type)"},{"location":"stats_binary_frames/#stats-sub-types","title":"Stats Sub-Types","text":"The CMD_GET_STATS command uses a 2-byte frame structure: - Byte 0: CMD_GET_STATS (56) - Byte 1: Stats sub-type: - STATS_TYPE_CORE (0) - Get core device statistics - STATS_TYPE_RADIO (1) - Get radio statistics - STATS_TYPE_PACKETS (2) - Get packet statistics
RESP_CODE_STATS 24 Statistics response (2-byte response: code + sub-type)"},{"location":"stats_binary_frames/#stats-response-sub-types","title":"Stats Response Sub-Types","text":"The RESP_CODE_STATS response uses a 2-byte header structure: - Byte 0: RESP_CODE_STATS (24) - Byte 1: Stats sub-type (matches command sub-type): - STATS_TYPE_CORE (0) - Core device statistics response - STATS_TYPE_RADIO (1) - Radio statistics response - STATS_TYPE_PACKETS (2) - Packet statistics response
Total Frame Size: 11 bytes
Offset Size Type Field Name Description Range/Notes 0 1 uint8_t response_code Always0x18 (24) - 1 1 uint8_t stats_type Always 0x00 (STATS_TYPE_CORE) - 2 2 uint16_t battery_mv Battery voltage in millivolts 0 - 65,535 4 4 uint32_t uptime_secs Device uptime in seconds 0 - 4,294,967,295 8 2 uint16_t errors Error flags bitmask - 10 1 uint8_t queue_len Outbound packet queue length 0 - 255"},{"location":"stats_binary_frames/#example-structure-cc","title":"Example Structure (C/C++)","text":"struct StatsCore {\n uint8_t response_code; // 0x18\n uint8_t stats_type; // 0x00 (STATS_TYPE_CORE)\n uint16_t battery_mv;\n uint32_t uptime_secs;\n uint16_t errors;\n uint8_t queue_len;\n} __attribute__((packed));\nTotal Frame Size: 14 bytes
Offset Size Type Field Name Description Range/Notes 0 1 uint8_t response_code Always0x18 (24) - 1 1 uint8_t stats_type Always 0x01 (STATS_TYPE_RADIO) - 2 2 int16_t noise_floor Radio noise floor in dBm -140 to +10 4 1 int8_t last_rssi Last received signal strength in dBm -128 to +127 5 1 int8_t last_snr SNR scaled by 4 Divide by 4.0 for dB 6 4 uint32_t tx_air_secs Cumulative transmit airtime in seconds 0 - 4,294,967,295 10 4 uint32_t rx_air_secs Cumulative receive airtime in seconds 0 - 4,294,967,295"},{"location":"stats_binary_frames/#example-structure-cc_1","title":"Example Structure (C/C++)","text":"struct StatsRadio {\n uint8_t response_code; // 0x18\n uint8_t stats_type; // 0x01 (STATS_TYPE_RADIO)\n int16_t noise_floor;\n int8_t last_rssi;\n int8_t last_snr; // Divide by 4.0 to get actual SNR in dB\n uint32_t tx_air_secs;\n uint32_t rx_air_secs;\n} __attribute__((packed));\nTotal Frame Size: 26 bytes (legacy) or 30 bytes (includes recv_errors)
0x18 (24) - 1 1 uint8_t stats_type Always 0x02 (STATS_TYPE_PACKETS) - 2 4 uint32_t recv Total packets received 0 - 4,294,967,295 6 4 uint32_t sent Total packets sent 0 - 4,294,967,295 10 4 uint32_t flood_tx Packets sent via flood routing 0 - 4,294,967,295 14 4 uint32_t direct_tx Packets sent via direct routing 0 - 4,294,967,295 18 4 uint32_t flood_rx Packets received via flood routing 0 - 4,294,967,295 22 4 uint32_t direct_rx Packets received via direct routing 0 - 4,294,967,295 26 4 uint32_t recv_errors Receive/CRC errors (RadioLib); present only in 30-byte frame 0 - 4,294,967,295"},{"location":"stats_binary_frames/#notes","title":"Notes","text":"recv = flood_rx + direct_rxsent = flood_tx + direct_txrecv_errors at offset 26.struct StatsPackets {\n uint8_t response_code; // 0x18\n uint8_t stats_type; // 0x02 (STATS_TYPE_PACKETS)\n uint32_t recv;\n uint32_t sent;\n uint32_t flood_tx;\n uint32_t direct_tx;\n uint32_t flood_rx;\n uint32_t direct_rx;\n uint32_t recv_errors; // present when frame size is 30\n} __attribute__((packed));\n# Send CMD_GET_STATS command\ndef send_get_stats_core(serial_interface):\n \"\"\"Send command to get core stats\"\"\"\n cmd = bytes([56, 0]) # CMD_GET_STATS (56) + STATS_TYPE_CORE (0)\n serial_interface.write(cmd)\n\ndef send_get_stats_radio(serial_interface):\n \"\"\"Send command to get radio stats\"\"\"\n cmd = bytes([56, 1]) # CMD_GET_STATS (56) + STATS_TYPE_RADIO (1)\n serial_interface.write(cmd)\n\ndef send_get_stats_packets(serial_interface):\n \"\"\"Send command to get packet stats\"\"\"\n cmd = bytes([56, 2]) # CMD_GET_STATS (56) + STATS_TYPE_PACKETS (2)\n serial_interface.write(cmd)\nimport struct\n\ndef parse_stats_core(frame):\n \"\"\"Parse RESP_CODE_STATS + STATS_TYPE_CORE frame (11 bytes)\"\"\"\n response_code, stats_type, battery_mv, uptime_secs, errors, queue_len = \\\n struct.unpack('<B B H I H B', frame)\n assert response_code == 24 and stats_type == 0, \"Invalid response type\"\n return {\n 'battery_mv': battery_mv,\n 'uptime_secs': uptime_secs,\n 'errors': errors,\n 'queue_len': queue_len\n }\n\ndef parse_stats_radio(frame):\n \"\"\"Parse RESP_CODE_STATS + STATS_TYPE_RADIO frame (14 bytes)\"\"\"\n response_code, stats_type, noise_floor, last_rssi, last_snr, tx_air_secs, rx_air_secs = \\\n struct.unpack('<B B h b b I I', frame)\n assert response_code == 24 and stats_type == 1, \"Invalid response type\"\n return {\n 'noise_floor': noise_floor,\n 'last_rssi': last_rssi,\n 'last_snr': last_snr / 4.0, # Unscale SNR\n 'tx_air_secs': tx_air_secs,\n 'rx_air_secs': rx_air_secs\n }\n\ndef parse_stats_packets(frame):\n \"\"\"Parse RESP_CODE_STATS + STATS_TYPE_PACKETS frame (26 or 30 bytes)\"\"\"\n assert len(frame) >= 26, \"STATS_TYPE_PACKETS frame too short\"\n response_code, stats_type, recv, sent, flood_tx, direct_tx, flood_rx, direct_rx = \\\n struct.unpack('<B B I I I I I I', frame[:26])\n assert response_code == 24 and stats_type == 2, \"Invalid response type\"\n result = {\n 'recv': recv,\n 'sent': sent,\n 'flood_tx': flood_tx,\n 'direct_tx': direct_tx,\n 'flood_rx': flood_rx,\n 'direct_rx': direct_rx\n }\n if len(frame) >= 30:\n (recv_errors,) = struct.unpack('<I', frame[26:30])\n result['recv_errors'] = recv_errors\n return result\n// Send CMD_GET_STATS command\nconst CMD_GET_STATS = 56;\nconst STATS_TYPE_CORE = 0;\nconst STATS_TYPE_RADIO = 1;\nconst STATS_TYPE_PACKETS = 2;\n\nfunction sendGetStatsCore(serialInterface: SerialPort): void {\n const cmd = new Uint8Array([CMD_GET_STATS, STATS_TYPE_CORE]);\n serialInterface.write(cmd);\n}\n\nfunction sendGetStatsRadio(serialInterface: SerialPort): void {\n const cmd = new Uint8Array([CMD_GET_STATS, STATS_TYPE_RADIO]);\n serialInterface.write(cmd);\n}\n\nfunction sendGetStatsPackets(serialInterface: SerialPort): void {\n const cmd = new Uint8Array([CMD_GET_STATS, STATS_TYPE_PACKETS]);\n serialInterface.write(cmd);\n}\ninterface StatsCore {\n battery_mv: number;\n uptime_secs: number;\n errors: number;\n queue_len: number;\n}\n\ninterface StatsRadio {\n noise_floor: number;\n last_rssi: number;\n last_snr: number;\n tx_air_secs: number;\n rx_air_secs: number;\n}\n\ninterface StatsPackets {\n recv: number;\n sent: number;\n flood_tx: number;\n direct_tx: number;\n flood_rx: number;\n direct_rx: number;\n recv_errors?: number; // present when frame is 30 bytes\n}\n\nfunction parseStatsCore(buffer: ArrayBuffer): StatsCore {\n const view = new DataView(buffer);\n const response_code = view.getUint8(0);\n const stats_type = view.getUint8(1);\n if (response_code !== 24 || stats_type !== 0) {\n throw new Error('Invalid response type');\n }\n return {\n battery_mv: view.getUint16(2, true),\n uptime_secs: view.getUint32(4, true),\n errors: view.getUint16(8, true),\n queue_len: view.getUint8(10)\n };\n}\n\nfunction parseStatsRadio(buffer: ArrayBuffer): StatsRadio {\n const view = new DataView(buffer);\n const response_code = view.getUint8(0);\n const stats_type = view.getUint8(1);\n if (response_code !== 24 || stats_type !== 1) {\n throw new Error('Invalid response type');\n }\n return {\n noise_floor: view.getInt16(2, true),\n last_rssi: view.getInt8(4),\n last_snr: view.getInt8(5) / 4.0, // Unscale SNR\n tx_air_secs: view.getUint32(6, true),\n rx_air_secs: view.getUint32(10, true)\n };\n}\n\nfunction parseStatsPackets(buffer: ArrayBuffer): StatsPackets {\n const view = new DataView(buffer);\n if (buffer.byteLength < 26) {\n throw new Error('STATS_TYPE_PACKETS frame too short');\n }\n const response_code = view.getUint8(0);\n const stats_type = view.getUint8(1);\n if (response_code !== 24 || stats_type !== 2) {\n throw new Error('Invalid response type');\n }\n const result: StatsPackets = {\n recv: view.getUint32(2, true),\n sent: view.getUint32(6, true),\n flood_tx: view.getUint32(10, true),\n direct_tx: view.getUint32(14, true),\n flood_rx: view.getUint32(18, true),\n direct_rx: view.getUint32(22, true)\n };\n if (buffer.byteLength >= 30) {\n result.recv_errors = view.getUint32(26, true);\n }\n return result;\n}\nBelow are the commands you can enter into the Terminal Chat clients:
set freq {frequency}\nSet the LoRa frequency. Example: set freq 915.8
set tx {tx-power-dbm}\nSets LoRa transmit power in dBm.
set name {name}\nSets your advertisement name.
set lat {latitude}\nSets your advertisement map latitude. (decimal degrees)
set lon {longitude}\nSets your advertisement map longitude. (decimal degrees)
set af {air-time-factor}\nSets the transmit air-time-factor.
time {epoch-secs}\nSet the device clock using UNIX epoch seconds. Example: time 1738242833
advert\nSends an advertisement packet
clock\nDisplays current time per device's clock.
ver\nShows the device version and firmware build date.
card\nDisplays your 'business card', for other to manually import
import {card}\nImports the given card to your contacts.
list {n}\nList all contacts by most recent. (optional {n}, is the last n by advertisement date)
to\nShows the name of current recipient contact. (for subsequent 'send' commands)
to {name-prefix}\nSets the recipient to the first matching contact (in 'list') by the name prefix. (ie. you don't have to type whole name)
send {text}\nSends the text message (as DM) to current recipient.
reset path\nResets the path to current recipient, for new path discovery.
public {text}\nSends the text message to the built-in 'public' group channel
"}]} \ No newline at end of file +{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"],"fields":{"title":{"boost":1000.0},"text":{"boost":1.0},"tags":{"boost":1000000.0}}},"docs":[{"location":"","title":"Introduction","text":"Welcome to the MeshCore documentation.
Below are a few quick start guides.
If you find a mistake in any of our documentation, or find something is missing, please feel free to open a pull request for us to review.
This document provides an overview of CLI commands that can be sent to MeshCore Repeaters, Room Servers and Sensors.
"},{"location":"cli_commands/#navigation","title":"Navigation","text":"Usage: - reboot
Usage: - clkreboot
Usage: - clock sync
Usage: - clock
Usage: - time <epoch_seconds>
Parameters: - epoc_seconds: Unix epoc time
Usage: - advert
Usage: - start ota
Usage: - erase
Serial Only: Yes
Warning: This is destructive!
"},{"location":"cli_commands/#neighbors-repeater-only","title":"Neighbors (Repeater Only)","text":""},{"location":"cli_commands/#list-nearby-neighbors","title":"List nearby neighbors","text":"Usage: - neighbors
Note: The output of this command is limited to the 8 most recent adverts.
Note: Each line is encoded as {pubkey-prefix}:{timestamp}:{snr*4}
Usage: - neighbor.remove <pubkey_prefix>
Parameters: - pubkey_prefix: The public key of the node to remove from the neighbors list
Usage: clear stats
Usage: - stats-core
Serial Only: Yes
"},{"location":"cli_commands/#radio-stats-noise-floor-last-rssisnr-airtime-receive-errors","title":"Radio Stats - Noise floor, Last RSSI/SNR, Airtime, Receive errors","text":"Usage: stats-radio
Serial Only: Yes
"},{"location":"cli_commands/#packet-stats-packet-counters-received-sent","title":"Packet stats - Packet counters: Received, Sent","text":"Usage: stats-packets
Serial Only: Yes
"},{"location":"cli_commands/#logging","title":"Logging","text":""},{"location":"cli_commands/#begin-capture-of-rx-log-to-node-storage","title":"Begin capture of rx log to node storage","text":"Usage: log start
Usage: log stop
Usage: log erase
Usage: log
Serial Only: Yes
"},{"location":"cli_commands/#info","title":"Info","text":""},{"location":"cli_commands/#get-the-version","title":"Get the Version","text":"Usage: ver
Usage: board
Usage: - get radio - set radio <freq>,<bw>,<sf>,<cr>
Parameters: - freq: Frequency in MHz - bw: Bandwidth in kHz - sf: Spreading factor (5-12) - cr: Coding rate (5-8)
Set by build flag: LORA_FREQ, LORA_BW, LORA_SF, LORA_CR
Default: 869.525,250,11,5
Note: Requires reboot to apply
"},{"location":"cli_commands/#view-or-change-this-nodes-transmit-power","title":"View or change this node's transmit power","text":"Usage: - get tx - set tx <dbm>
Parameters: - dbm: Power level in dBm (1-22)
Set by build flag: LORA_TX_POWER
Default: Varies by board
Notes: This setting only controls the power level of the LoRa chip. Some nodes have an additional power amplifier stage which increases the total output. Referr to the node's manual for the correct setting to use. Setting a value too high may violate the laws in your country.
"},{"location":"cli_commands/#change-the-radio-parameters-for-a-set-duration","title":"Change the radio parameters for a set duration","text":"Usage: - tempradio <freq>,<bw>,<sf>,<cr>,<timeout_mins>
Parameters: - freq: Frequency in MHz (300-2500) - bw: Bandwidth in kHz (7.8-500) - sf: Spreading factor (5-12) - cr: Coding rate (5-8) - timeout_mins: Duration in minutes (must be > 0)
Note: This is not saved to preferences and will clear on reboot
"},{"location":"cli_commands/#view-or-change-this-nodes-frequency","title":"View or change this node's frequency","text":"Usage: - get freq - set freq <frequency>
Parameters: - frequency: Frequency in MHz
Default: 869.525
Note: Requires reboot to apply
"},{"location":"cli_commands/#system","title":"System","text":""},{"location":"cli_commands/#view-or-change-this-nodes-name","title":"View or change this node's name","text":"Usage: - get name - set name <name>
Parameters: - name: Node name
Set by build flag: ADVERT_NAME
Default: Varies by board
Note: Max length varies. If a location is set, the max length is 24 bytes; 32 otherwise. Emoji and unicode characters may take more than one byte.
"},{"location":"cli_commands/#view-or-change-this-nodes-latitude","title":"View or change this node's latitude","text":"Usage: - get lat - set lat <degrees>
Set by build flag: ADVERT_LAT
Default: 0
Parameters: - degrees: Latitude in degrees
Usage: - get lon - set lon <degrees>
Set by build flag: ADVERT_LON
Default: 0
Parameters: - degrees: Longitude in degrees
Usage: - get prv.key - set prv.key <private_key>
Parameters: - private_key: Private key in hex format (64 hex characters)
Serial Only: - get prv.key: Yes - set prv.key: No
Note: Requires reboot to take effect after setting
"},{"location":"cli_commands/#change-this-nodes-admin-password","title":"Change this node's admin password","text":"Usage: - password <password>
Parameters: - password: Admin password
Set by build flag: ADMIN_PASSWORD
Default: password
Note: Echoed back for confirmation
Note: Any node using this password will be added to the admin ACL list.
"},{"location":"cli_commands/#view-or-change-this-nodes-guest-password","title":"View or change this node's guest password","text":"Usage: - get guest.password - set guest.password <password>
Parameters: - password: Guest password
Set by build flag: ROOM_PASSWORD (Room Server only)
Default: <blank>
Usage: - get owner.info - set owner.info <text>
Parameters: - text: Owner information text
Default: <blank>
Note: | characters are translated to newlines
Note: Requires firmware 1.12.+
"},{"location":"cli_commands/#fine-tune-the-battery-reading","title":"Fine-tune the battery reading","text":"Usage: - get adc.multiplier - set adc.multiplier <value>
Parameters: - value: ADC multiplier (0.0-10.0)
Default: 0.0 (value defined by board)
Note: Returns \"Error: unsupported by this board\" if hardware doesn't support it
"},{"location":"cli_commands/#view-or-change-this-nodes-power-saving-flag-repeater-only","title":"View or change this node's power saving flag (Repeater Only)","text":"Usage: - powersaving <state> - powersaving
Parameters: - state: on|off
Default: on
Note: When enabled, device enters sleep mode between radio transmissions
"},{"location":"cli_commands/#routing","title":"Routing","text":""},{"location":"cli_commands/#view-or-change-this-nodes-repeat-flag","title":"View or change this node's repeat flag","text":"Usage: - get repeat - set repeat <state>
Parameters: - state: on|off
Default: on
Usage: - get txdelay - set txdelay <value>
Parameters: - value: Transmit delay factor (0-2)
Default: 0.5
Usage: - get direct.txdelay - set direct.txdelay <value>
Parameters: - value: Direct transmit delay factor (0-2)
Default: 0.2
Usage: - get rxdelay - set rxdelay <value>
Parameters: - value: Receive delay base (0-20)
Default: 0.0
Usage: - get af - set af <value>
Parameters: - value: Airtime factor (0-9)
Default: 1.0
Usage: - get int.thresh - set int.thresh <value>
Parameters: - value: Interference threshold value
Default: 0.0
Usage: - get agc.reset.interval - set agc.reset.interval <value>
Parameters: - value: Interval in seconds rounded down to a multiple of 4 (17 becomes 16)
Default: 0.0
Usage: - get multi.acks - set multi.acks <state>
Parameters: - state: 0 (disable) or 1 (enable)
Default: 0
Usage: - get flood.advert.interval - set flood.advert.interval <hours>
Parameters: - hours: Interval in hours (3-168)
Default: 12 (Repeater) - 0 (Sensor)
Usage: - get advert.interval - set advert.interval <minutes>
Parameters: - minutes: Interval in minutes rounded down to the nearest multiple of 2 (61 becomes 60) (60-240)
Default: 0
Usage: - get flood.max - set flood.max <value>
Parameters: - value: Maximum flood hop count (0-64)
Default: 64
Usage: - setperm <pubkey> <permissions>
Parameters: - pubkey: Companion public key - permissions: - 0: Guest - 1: Read-only - 2: Read-write - 3: Admin
Note: Removes the entry when permissions is omitted
Usage: - get acl
Serial Only: Yes
"},{"location":"cli_commands/#view-or-change-this-room-servers-read-only-flag","title":"View or change this room server's 'read-only' flag","text":"Usage: - get allow.read.only - set allow.read.only <state>
Parameters: - state: on (enable) or off (disable)
Default: off
Usage: - region load - region load <name> [flood_flag]
Parameters: - name: A name of a region. * represents the wildcard region
Note: flood_flag: Optional F to allow flooding
Note: Indentation creates parent-child relationships (max 8 levels)
Note: region load with an empty name will not work remotely (it's interactive)
Usage: - region save
Usage: - region allowf <name>
Parameters: - name: Region name (or * for wildcard)
Note: Setting on wildcard * allows packets without region transport codes
Usage: - region denyf <name>
Parameters: - name: Region name (or * for wildcard)
Note: Setting on wildcard * drops packets without region transport codes
Usage: - region get <name>
Parameters: - name: Region name (or * for wildcard)
Usage: - region home - region home <name>
Parameters: - name: Region name
Usage: - region put <name> [parent_name]
Parameters: - name: Region name - parent_name: Parent region name (optional, defaults to wildcard)
Usage: - region remove <name>
Parameters: - name: Region name
Note: Must remove all child regions before the region can be removed
"},{"location":"cli_commands/#view-all-regions","title":"View all regions","text":"Usage: - region list <filter>
Serial Only: Yes
Parameters: - filter: allowed|denied
Note: Requires firmware 1.12.+
"},{"location":"cli_commands/#dump-all-defined-regions-and-flood-permissions","title":"Dump all defined regions and flood permissions","text":"Usage: - region
Serial Only: For firmware older than 1.12.0
"},{"location":"cli_commands/#region-examples","title":"Region Examples","text":"Example 1: Using F Flag with Named Public Region
region load\n#Europe F\n<blank line to end region load>\nregion save\nExplanation: - Creates a region named #Europe with flooding enabled - Packets from this region will be flooded to other nodes
Example 2: Using Wildcard with F Flag
region load \n* F\n<blank line to end region load>\nregion save\nExplanation: - Creates a wildcard region * with flooding enabled - Enables flooding for all regions automatically - Applies only to packets without transport codes
Example 3: Using Wildcard Without F Flag
region load \n*\n<blank line to end region load>\nregion save\nExplanation: - Creates a wildcard region * without flooding - This region exists but doesn't affect packet distribution - Used as a default/empty region
Example 4: Nested Public Region with F Flag
region load \n#Europe F\n #UK\n #London\n #Manchester\n #France\n #Paris\n #Lyon\n<blank line to end region load>\nregion save\nExplanation: - Creates #Europe region with flooding enabled - Adds nested child regions (#UK, #France) - All nested regions inherit the flooding flag from parent
Example 5: Wildcard with Nested Public Regions
region load \n* F\n #NorthAmerica\n #USA\n #NewYork\n #California\n #Canada\n #Ontario\n #Quebec\n<blank line to end region load>\nregion save\nExplanation: - Creates wildcard region * with flooding enabled - Adds nested #NorthAmerica hierarchy - Enables flooding for all child regions automatically - Useful for global networks with specific regional rules
Usage: - gps - gps <state>
Parameters: - state: on|off
Default: off
Note: Output format: {status}, {fix}, {sat count} (when enabled)
Usage: - gps sync
Usage: - gps setloc
Usage: - gps advert - gps advert <policy>
Parameters: - policy: none|shared|prefs - none: don't include location in adverts - share: share gps location (from SensorManager) - prefs: location stored in node's lat and lon settings
Default: prefs
Usage: sensor list [start]
Parameters: - start: Optional starting index (defaults to 0)
Note: Output format: <var_name>=<value>\\n
Usage: - sensor get <key> - sensor set <key> <value>
Parameters: - key: Sensor setting name - value: The value to set the sensor to
Usage: - get bridge.enabled - set bridge.enabled <state>
Parameters: - state: on|off
Default: off
Usage: - get bridge.source
Usage: - get bridge.delay - set bridge.delay <ms>
Parameters: - ms: Delay in milliseconds (0-10000)
Default: 500
Usage: - get bridge.source - set bridge.source <source>
Parameters: - source: - rx: bridges received packets - tx: bridges transmitted packets
Default: tx
Usage: - get bridge.baud - set bridge.baud <rate>
Parameters: - rate: Baud rate (9600, 19200, 38400, 57600, or 115200)
Default: 115200
Usage: - get bridge.channel - set bridge.channel <channel>
Parameters: - channel: Channel number (1-14)
Usage: - get bridge.secret - set bridge.secret <secret>
Parameters: - secret: 16-character encryption secret
Default: Varies by board
"},{"location":"companion_protocol/","title":"Companion Protocol","text":"NOTE: This document is still in development. Some information may be inaccurate.
This document provides a comprehensive guide for communicating with MeshCore devices over Bluetooth Low Energy (BLE).
It is platform-agnostic and can be used for Android, iOS, Python, JavaScript, or any other platform that supports BLE.
"},{"location":"companion_protocol/#official-libraries","title":"Official Libraries","text":"Please see the following repos for existing MeshCore Companion Protocol libraries.
All secrets, hashes, and cryptographic values shown in this guide are example values only.
MeshCore Companion devices expose a BLE service with the following UUIDs:
6E400001-B5A3-F393-E0A9-E50E24DCCA9E6E400002-B5A3-F393-E0A9-E50E24DCCA9E6E400003-B5A3-F393-E0A9-E50E24DCCA9EScan for Devices
Connect to GATT
Discover Services and Characteristics
6E400001-B5A3-F393-E0A9-E50E24DCCA9E6E400002-B5A3-F393-E0A9-E50E24DCCA9E6E400003-B5A3-F393-E0A9-E50E24DCCA9EEnable Notifications
Send Initial Commands
CMD_APP_START to identify your app to firmware and get radio settingsCMD_DEVICE_QEURY to fetch device info and negotiate supported protocol versionsCMD_SET_DEVICE_TIME to set the firmware clockCMD_GET_CONTACTS to fetch all contactsCMD_GET_CHANNEL multiple times to fetch all channel slotsCMD_SYNC_NEXT_MESSAGE to fetch the next message stored in firmwarePUSH_CODE_MSG_WAITING or PUSH_CODE_ADVERTNote: MeshCore devices may disconnect after periods of inactivity. Implement auto-reconnect logic with exponential backoff.
"},{"location":"companion_protocol/#ble-write-type","title":"BLE Write Type","text":"When writing commands to the RX characteristic, specify the write type:
Platform-specific:
BluetoothGattCharacteristic.WRITE_TYPE_DEFAULT or WRITE_TYPE_NO_RESPONSECBCharacteristicWriteType.withResponse or .withoutResponsewrite_gatt_char() with response=True or FalseRecommendation: Use write with response for reliability.
"},{"location":"companion_protocol/#mtu-maximum-transmission-unit","title":"MTU (Maximum Transmission Unit)","text":"The default BLE MTU is 23 bytes (20 bytes payload). For larger commands like SET_CHANNEL (66 bytes), you may need to:
gatt.requestMtu(512)peripheral.maximumWriteValueLength(for:)Critical: Commands must be sent in the correct sequence:
After Connection:
Command-Response Matching:
CMD_GET_CHANNEL \u2192 RESP_CODE_CHANNEL_INFO)For reliable operation, implement a command queue.
Queue Structure:
Error Handling:
The MeshCore protocol uses a binary format with the following structure:
Most packets follow this format:
[Packet Type (1 byte)] [Data (variable length)]\nThe first byte indicates the packet type (see Response Parsing).
"},{"location":"companion_protocol/#commands","title":"Commands","text":""},{"location":"companion_protocol/#1-app-start","title":"1. App Start","text":"Purpose: Initialize communication with the device. Must be sent first after connection.
Command Format:
Byte 0: 0x01\nByte 1: 0x03\nBytes 2-10: \"mccli\" (ASCII, null-padded to 9 bytes)\nExample (hex):
01 03 6d 63 63 6c 69 00 00 00 00\nResponse: PACKET_OK (0x00)
Purpose: Query device information.
Command Format:
Byte 0: 0x16\nByte 1: 0x03\nExample (hex):
16 03\nResponse: PACKET_DEVICE_INFO (0x0D) with device information
Purpose: Retrieve information about a specific channel.
Command Format:
Byte 0: 0x1F\nByte 1: Channel Index (0-7)\nExample (get channel 1):
1F 01\nResponse: PACKET_CHANNEL_INFO (0x12) with channel details
Note: The device does not return channel secrets for security reasons. Store secrets locally when creating channels.
"},{"location":"companion_protocol/#4-set-channel","title":"4. Set Channel","text":"Purpose: Create or update a channel on the device.
Command Format:
Byte 0: 0x20\nByte 1: Channel Index (0-7)\nBytes 2-33: Channel Name (32 bytes, UTF-8, null-padded)\nBytes 34-65: Secret (32 bytes)\nTotal Length: 66 bytes
Channel Index: - Index 0: Reserved for public channels (no secret) - Indices 1-7: Available for private channels
Channel Name: - UTF-8 encoded - Maximum 32 bytes - Padded with null bytes (0x00) if shorter
Secret Field (32 bytes): - For private channels: 32-byte secret - For public channels: All zeros (0x00)
Example (create channel \"YourChannelName\" at index 1 with secret):
20 01 53 4D 53 00 00 ... (name padded to 32 bytes)\n [32 bytes of secret]\nResponse: PACKET_OK (0x00) on success, PACKET_ERROR (0x01) on failure
Purpose: Send a text message to a channel.
Command Format:
Byte 0: 0x03\nByte 1: 0x00\nByte 2: Channel Index (0-7)\nBytes 3-6: Timestamp (32-bit little-endian Unix timestamp, seconds)\nBytes 7+: Message Text (UTF-8, variable length)\nTimestamp: Unix timestamp in seconds (32-bit unsigned integer, little-endian)
Example (send \"Hello\" to channel 1 at timestamp 1234567890):
03 00 01 D2 02 96 49 48 65 6C 6C 6F\nResponse: PACKET_MSG_SENT (0x06) on success
Purpose: Request the next queued message from the device.
Command Format:
Byte 0: 0x0A\nExample (hex):
0A\nResponse: - PACKET_CHANNEL_MSG_RECV (0x08) or PACKET_CHANNEL_MSG_RECV_V3 (0x11) for channel messages - PACKET_CONTACT_MSG_RECV (0x07) or PACKET_CONTACT_MSG_RECV_V3 (0x10) for contact messages - PACKET_NO_MORE_MSGS (0x0A) if no messages available
Note: Poll this command periodically to retrieve queued messages. The device may also send PACKET_MESSAGES_WAITING (0x83) as a notification when messages are available.
Purpose: Query device battery level.
Command Format:
Byte 0: 0x14\nExample (hex):
14\nResponse: PACKET_BATTERY (0x0C) with battery percentage
8b3387e9c5cdea6ac9e5edbaa115cd72sha256(\"#test\")#test has the key: 9cd8fcf22a47333b591d96a2b848b73fCMD_SET_CHANNEL with name and secretCMD_GET_CHANNEL with channel indexRESP_CODE_CHANNEL_INFO responseCMD_SET_CHANNEL with empty name and all-zero secretMessages are received via the RX characteristic (notifications). The device sends:
PACKET_CHANNEL_MSG_RECV (0x08) - Standard formatPACKET_CHANNEL_MSG_RECV_V3 (0x11) - Version 3 with SNR
Contact Messages:
PACKET_CONTACT_MSG_RECV (0x07) - Standard formatPACKET_CONTACT_MSG_RECV_V3 (0x10) - Version 3 with SNR
Notifications:
PACKET_MESSAGES_WAITING (0x83) - Indicates messages are queuedStandard Format (PACKET_CONTACT_MSG_RECV, 0x07):
Byte 0: 0x07 (packet type)\nBytes 1-6: Public Key Prefix (6 bytes, hex)\nByte 7: Path Length\nByte 8: Text Type\nBytes 9-12: Timestamp (32-bit little-endian)\nBytes 13-16: Signature (4 bytes, only if txt_type == 2)\nBytes 17+: Message Text (UTF-8)\nV3 Format (PACKET_CONTACT_MSG_RECV_V3, 0x10):
Byte 0: 0x10 (packet type)\nByte 1: SNR (signed byte, multiplied by 4)\nBytes 2-3: Reserved\nBytes 4-9: Public Key Prefix (6 bytes, hex)\nByte 10: Path Length\nByte 11: Text Type\nBytes 12-15: Timestamp (32-bit little-endian)\nBytes 16-19: Signature (4 bytes, only if txt_type == 2)\nBytes 20+: Message Text (UTF-8)\nParsing Pseudocode:
def parse_contact_message(data):\n packet_type = data[0]\n offset = 1\n\n # Check for V3 format\n if packet_type == 0x10: # V3\n snr_byte = data[offset]\n snr = ((snr_byte if snr_byte < 128 else snr_byte - 256) / 4.0)\n offset += 3 # Skip SNR + reserved\n\n pubkey_prefix = data[offset:offset+6].hex()\n offset += 6\n\n path_len = data[offset]\n txt_type = data[offset + 1]\n offset += 2\n\n timestamp = int.from_bytes(data[offset:offset+4], 'little')\n offset += 4\n\n # If txt_type == 2, skip 4-byte signature\n if txt_type == 2:\n offset += 4\n\n message = data[offset:].decode('utf-8')\n\n return {\n 'pubkey_prefix': pubkey_prefix,\n 'path_len': path_len,\n 'txt_type': txt_type,\n 'timestamp': timestamp,\n 'message': message,\n 'snr': snr if packet_type == 0x10 else None\n }\nStandard Format (PACKET_CHANNEL_MSG_RECV, 0x08):
Byte 0: 0x08 (packet type)\nByte 1: Channel Index (0-7)\nByte 2: Path Length\nByte 3: Text Type\nBytes 4-7: Timestamp (32-bit little-endian)\nBytes 8+: Message Text (UTF-8)\nV3 Format (PACKET_CHANNEL_MSG_RECV_V3, 0x11):
Byte 0: 0x11 (packet type)\nByte 1: SNR (signed byte, multiplied by 4)\nBytes 2-3: Reserved\nByte 4: Channel Index (0-7)\nByte 5: Path Length\nByte 6: Text Type\nBytes 7-10: Timestamp (32-bit little-endian)\nBytes 11+: Message Text (UTF-8)\nParsing Pseudocode:
def parse_channel_message(data):\n packet_type = data[0]\n offset = 1\n\n # Check for V3 format\n if packet_type == 0x11: # V3\n snr_byte = data[offset]\n snr = ((snr_byte if snr_byte < 128 else snr_byte - 256) / 4.0)\n offset += 3 # Skip SNR + reserved\n\n channel_idx = data[offset]\n path_len = data[offset + 1]\n txt_type = data[offset + 2]\n timestamp = int.from_bytes(data[offset+3:offset+7], 'little')\n message = data[offset+7:].decode('utf-8')\n\n return {\n 'channel_idx': channel_idx,\n 'timestamp': timestamp,\n 'message': message,\n 'snr': snr if packet_type == 0x11 else None\n }\nUse the SEND_CHANNEL_MESSAGE command (see Commands).
Important: - Messages are limited to 133 characters per MeshCore specification - Long messages should be split into chunks - Include a chunk indicator (e.g., \"[1/3] message text\")
"},{"location":"companion_protocol/#response-parsing","title":"Response Parsing","text":""},{"location":"companion_protocol/#packet-types","title":"Packet Types","text":"Value Name Description 0x00 PACKET_OK Command succeeded 0x01 PACKET_ERROR Command failed 0x02 PACKET_CONTACT_START Start of contact list 0x03 PACKET_CONTACT Contact information 0x04 PACKET_CONTACT_END End of contact list 0x05 PACKET_SELF_INFO Device self-information 0x06 PACKET_MSG_SENT Message sent confirmation 0x07 PACKET_CONTACT_MSG_RECV Contact message (standard) 0x08 PACKET_CHANNEL_MSG_RECV Channel message (standard) 0x09 PACKET_CURRENT_TIME Current time response 0x0A PACKET_NO_MORE_MSGS No more messages available 0x0C PACKET_BATTERY Battery level 0x0D PACKET_DEVICE_INFO Device information 0x10 PACKET_CONTACT_MSG_RECV_V3 Contact message (V3 with SNR) 0x11 PACKET_CHANNEL_MSG_RECV_V3 Channel message (V3 with SNR) 0x12 PACKET_CHANNEL_INFO Channel information 0x80 PACKET_ADVERTISEMENT Advertisement packet 0x82 PACKET_ACK Acknowledgment 0x83 PACKET_MESSAGES_WAITING Messages waiting notification 0x88 PACKET_LOG_DATA RF log data (can be ignored)"},{"location":"companion_protocol/#parsing-responses","title":"Parsing Responses","text":"PACKET_OK (0x00):
Byte 0: 0x00\nBytes 1-4: Optional value (32-bit little-endian integer)\nPACKET_ERROR (0x01):
Byte 0: 0x01\nByte 1: Error code (optional)\nPACKET_CHANNEL_INFO (0x12):
Byte 0: 0x12\nByte 1: Channel Index\nBytes 2-33: Channel Name (32 bytes, null-terminated)\nBytes 34-65: Secret (32 bytes, but device typically only returns 20 bytes total)\nNote: The device may not return the full 66-byte packet. Parse what is available. The secret field is typically not returned for security reasons.
PACKET_DEVICE_INFO (0x0D):
Byte 0: 0x0D\nByte 1: Firmware Version (uint8)\nBytes 2+: Variable length based on firmware version\n\nFor firmware version >= 3:\nByte 2: Max Contacts Raw (uint8, actual = value * 2)\nByte 3: Max Channels (uint8)\nBytes 4-7: BLE PIN (32-bit little-endian)\nBytes 8-19: Firmware Build (12 bytes, UTF-8, null-padded)\nBytes 20-59: Model (40 bytes, UTF-8, null-padded)\nBytes 60-79: Version (20 bytes, UTF-8, null-padded)\nParsing Pseudocode:
def parse_device_info(data):\n if len(data) < 2:\n return None\n\n fw_ver = data[1]\n info = {'fw_ver': fw_ver}\n\n if fw_ver >= 3 and len(data) >= 80:\n info['max_contacts'] = data[2] * 2\n info['max_channels'] = data[3]\n info['ble_pin'] = int.from_bytes(data[4:8], 'little')\n info['fw_build'] = data[8:20].decode('utf-8').rstrip('\\x00').strip()\n info['model'] = data[20:60].decode('utf-8').rstrip('\\x00').strip()\n info['ver'] = data[60:80].decode('utf-8').rstrip('\\x00').strip()\n\n return info\nPACKET_BATTERY (0x0C):
Byte 0: 0x0C\nBytes 1-2: Battery Level (16-bit little-endian, percentage 0-100)\n\nOptional (if data size > 3):\nBytes 3-6: Used Storage (32-bit little-endian, KB)\nBytes 7-10: Total Storage (32-bit little-endian, KB)\nParsing Pseudocode:
def parse_battery(data):\n if len(data) < 3:\n return None\n\n level = int.from_bytes(data[1:3], 'little')\n info = {'level': level}\n\n if len(data) > 3:\n used_kb = int.from_bytes(data[3:7], 'little')\n total_kb = int.from_bytes(data[7:11], 'little')\n info['used_kb'] = used_kb\n info['total_kb'] = total_kb\n\n return info\nPACKET_SELF_INFO (0x05):
Byte 0: 0x05\nByte 1: Advertisement Type\nByte 2: TX Power\nByte 3: Max TX Power\nBytes 4-35: Public Key (32 bytes, hex)\nBytes 36-39: Advertisement Latitude (32-bit little-endian, divided by 1e6)\nBytes 40-43: Advertisement Longitude (32-bit little-endian, divided by 1e6)\nByte 44: Multi ACKs\nByte 45: Advertisement Location Policy\nByte 46: Telemetry Mode (bitfield)\nByte 47: Manual Add Contacts (bool)\nBytes 48-51: Radio Frequency (32-bit little-endian, divided by 1000.0)\nBytes 52-55: Radio Bandwidth (32-bit little-endian, divided by 1000.0)\nByte 56: Radio Spreading Factor\nByte 57: Radio Coding Rate\nBytes 58+: Device Name (UTF-8, variable length, null-terminated)\nParsing Pseudocode:
def parse_self_info(data):\n if len(data) < 36:\n return None\n\n offset = 1\n info = {\n 'adv_type': data[offset],\n 'tx_power': data[offset + 1],\n 'max_tx_power': data[offset + 2],\n 'public_key': data[offset + 3:offset + 35].hex()\n }\n offset += 35\n\n lat = int.from_bytes(data[offset:offset+4], 'little') / 1e6\n lon = int.from_bytes(data[offset+4:offset+8], 'little') / 1e6\n info['adv_lat'] = lat\n info['adv_lon'] = lon\n offset += 8\n\n info['multi_acks'] = data[offset]\n info['adv_loc_policy'] = data[offset + 1]\n telemetry_mode = data[offset + 2]\n info['telemetry_mode_env'] = (telemetry_mode >> 4) & 0b11\n info['telemetry_mode_loc'] = (telemetry_mode >> 2) & 0b11\n info['telemetry_mode_base'] = telemetry_mode & 0b11\n info['manual_add_contacts'] = data[offset + 3] > 0\n offset += 4\n\n freq = int.from_bytes(data[offset:offset+4], 'little') / 1000.0\n bw = int.from_bytes(data[offset+4:offset+8], 'little') / 1000.0\n info['radio_freq'] = freq\n info['radio_bw'] = bw\n info['radio_sf'] = data[offset + 8]\n info['radio_cr'] = data[offset + 9]\n offset += 10\n\n if offset < len(data):\n name_bytes = data[offset:]\n info['name'] = name_bytes.decode('utf-8').rstrip('\\x00').strip()\n\n return info\nPACKET_MSG_SENT (0x06):
Byte 0: 0x06\nByte 1: Message Type\nBytes 2-5: Expected ACK (4 bytes, hex)\nBytes 6-9: Suggested Timeout (32-bit little-endian, seconds)\nPACKET_ACK (0x82):
Byte 0: 0x82\nBytes 1-6: ACK Code (6 bytes, hex)\nPACKET_ERROR (0x01) may include an error code in byte 1:
Error Code Description 0x00 Generic error (no specific code) 0x01 Invalid command 0x02 Invalid parameter 0x03 Channel not found 0x04 Channel already exists 0x05 Channel index out of range 0x06 Secret mismatch 0x07 Message too long 0x08 Device busy 0x09 Not enough storageNote: Error codes may vary by firmware version. Always check byte 1 of PACKET_ERROR response.
BLE notifications may arrive in chunks, especially for larger packets. Implement buffering:
Implementation:
class PacketBuffer:\n def __init__(self):\n self.buffer = bytearray()\n self.expected_length = None\n\n def add_data(self, data):\n self.buffer.extend(data)\n\n # Check if we have a complete packet\n if len(self.buffer) >= 1:\n packet_type = self.buffer[0]\n\n # Determine expected length based on packet type\n expected = self.get_expected_length(packet_type)\n\n if expected is not None and len(self.buffer) >= expected:\n # Complete packet\n packet = bytes(self.buffer[:expected])\n self.buffer = self.buffer[expected:]\n return packet\n elif expected is None:\n # Variable length packet - try to parse what we have\n # Some packets have minimum length requirements\n if self.can_parse_partial(packet_type):\n return self.try_parse_partial()\n\n return None # Incomplete packet\n\n def get_expected_length(self, packet_type):\n # Fixed-length packets\n fixed_lengths = {\n 0x00: 5, # PACKET_OK (minimum)\n 0x01: 2, # PACKET_ERROR (minimum)\n 0x0A: 1, # PACKET_NO_MORE_MSGS\n 0x14: 3, # PACKET_BATTERY (minimum)\n }\n return fixed_lengths.get(packet_type)\n\n def can_parse_partial(self, packet_type):\n # Some packets can be parsed partially\n return packet_type in [0x12, 0x08, 0x11, 0x07, 0x10, 0x05, 0x0D]\n\n def try_parse_partial(self):\n # Try to parse with available data\n # Return packet if successfully parsed, None otherwise\n # This is packet-type specific\n pass\nUsage:
buffer = PacketBuffer()\n\ndef on_notification_received(data):\n packet = buffer.add_data(data)\n if packet:\n parse_and_handle_packet(packet)\nUse command queue to prevent concurrent commands
Asynchronous Messages:
PACKET_MESSAGES_WAITING (0x83) by polling GET_MESSAGE commandBuffer partial packets until complete
Response Matching:
Match responses to commands by expected packet type:
APP_START \u2192 PACKET_OKDEVICE_QUERY \u2192 PACKET_DEVICE_INFOGET_CHANNEL \u2192 PACKET_CHANNEL_INFOSET_CHANNEL \u2192 PACKET_OK or PACKET_ERRORSEND_CHANNEL_MESSAGE \u2192 PACKET_MSG_SENTGET_MESSAGE \u2192 PACKET_CHANNEL_MSG_RECV, PACKET_CONTACT_MSG_RECV, or PACKET_NO_MORE_MSGSGET_BATTERY \u2192 PACKET_BATTERYTimeout Handling:
SET_CHANNEL may need 1-2 seconds)Consider longer timeout for channel operations
Error Recovery:
PACKET_ERROR: Log error code, clear current command# 1. Scan for MeshCore device\ndevice = scan_for_device(\"MeshCore\")\n\n# 2. Connect to BLE GATT\ngatt = connect_to_device(device)\n\n# 3. Discover services and characteristics\nservice = discover_service(gatt, \"0000ff00-0000-1000-8000-00805f9b34fb\")\nrx_char = discover_characteristic(service, \"0000ff01-0000-1000-8000-00805f9b34fb\")\ntx_char = discover_characteristic(service, \"0000ff02-0000-1000-8000-00805f9b34fb\")\n\n# 4. Enable notifications on RX characteristic\nenable_notifications(rx_char, on_notification_received)\n\n# 5. Send AppStart command\nsend_command(tx_char, build_app_start())\nwait_for_response(PACKET_OK)\n# 1. Generate 16-byte secret\nsecret_16_bytes = generate_secret(16) # Use CSPRNG\nsecret_hex = secret_16_bytes.hex()\n\n# 2. Expand secret to 32 bytes using SHA-512\nimport hashlib\nsha512_hash = hashlib.sha512(secret_16_bytes).digest()\nsecret_32_bytes = sha512_hash[:32]\n\n# 3. Build SET_CHANNEL command\nchannel_name = \"YourChannelName\"\nchannel_index = 1 # Use 1-7 for private channels\ncommand = build_set_channel(channel_index, channel_name, secret_32_bytes)\n\n# 4. Send command\nsend_command(tx_char, command)\nresponse = wait_for_response(PACKET_OK)\n\n# 5. Store secret locally (device won't return it)\nstore_channel_secret(channel_index, secret_hex)\n# 1. Build channel message command\nchannel_index = 1\nmessage = \"Hello, MeshCore!\"\ntimestamp = int(time.time())\ncommand = build_channel_message(channel_index, message, timestamp)\n\n# 2. Send command\nsend_command(tx_char, command)\nresponse = wait_for_response(PACKET_MSG_SENT)\ndef on_notification_received(data):\n packet_type = data[0]\n\n if packet_type == PACKET_CHANNEL_MSG_RECV or packet_type == PACKET_CHANNEL_MSG_RECV_V3:\n message = parse_channel_message(data)\n handle_channel_message(message)\n elif packet_type == PACKET_MESSAGES_WAITING:\n # Poll for messages\n send_command(tx_char, build_get_message())\nStore last connected device address for quick reconnection
Secret Management:
Never log or transmit secrets in plain text
Message Handling:
CMD_SYNC_NEXT_MESSAGE when PUSH_CODE_MSG_WAITING is receivedImplement message deduplication to avoid display the same message twice
Channel Management:
Error Handling:
RESP_CODE_ERR responses appropriatelyGET_MESSAGE command periodicallyThis document explains how to build and view the MeshCore documentation locally.
"},{"location":"docs/#building-and-viewing-docs","title":"Building and viewing Docs","text":"pip install mkdocs\npip install mkdocs-material\nmkdocs serve - Start the live-reloading docs server.mkdocs build - Build the documentation site.A list of frequently-asked questions and answers for MeshCore
A: MeshCore is a multi platform system for enabling secure text based communications utilising LoRa radio hardware. It can be used for Off-Grid Communication, Emergency Response & Disaster Recovery, Outdoor Activities, Tactical Security including law enforcement and private security and also IoT sensor networks. (source)
MeshCore is free and open source: * MeshCore is the routing and firmware etc, available on GitHub under MIT license * There are clients made by the community, such as the web clients, these are free to use, and some are open source too * The cross platform mobile app developed by Liam Cottle for Android/iOS/PC etc is free to download and use * The T-Deck firmware is developed by Scott at Ripple Radios, the creator of MeshCore, is also free to flash on your devices and use
Some more advanced, but optional features are available on T-Deck if you register your device for a key to unlock. On the MeshCore smartphone clients for Android and iOS/iPadOS, you can unlock the wait timer for repeater and room server remote management over RF feature.
These features are completely optional and aren't needed for the core messaging experience. They're like super bonus features and to help the developers continue to work on these amazing features, they may charge a small fee for an unlock code to utilise the advanced features.
Anyone is able to build anything they like on top of MeshCore without paying anything.
"},{"location":"faq/#12-q-what-do-you-need-to-start-using-meshcore","title":"1.2. Q: What do you need to start using MeshCore?","text":"A: Everything you need for MeshCore is available at:
You need LoRa hardware devices to run MeshCore firmware as clients or server (repeater and room server).
"},{"location":"faq/#121-hardware","title":"1.2.1. Hardware","text":"MeshCore is available on a variety of 433MHz, 868MHz and 915MHz LoRa devices. For example, Lilygo T-Deck, T-Pager, RAK Wireless WisBlock RAK4631 devices (e.g. 19003, 19007, 19026), Heltec V3, Xiao S3 WIO, Xiao C3, Heltec T114, Station G2, Nano G2 Ultra, Seeed Studio T1000-E. More devices are being added regularly.
For an up-to-date list of supported devices, please go to https://flasher.meshcore.co.uk/
To use MeshCore without using a phone as the client interface, you can run MeshCore on a LiLygo's T-Deck, T-Deck Plus, T-Pager, T-Watch, or T-Display Pro. MeshCore Ultra firmware running on these devices are a complete off-grid secure communication solution.
"},{"location":"faq/#122-firmware","title":"1.2.2. Firmware","text":"MeshCore has four firmware types that are not available on other LoRa systems. MeshCore has the following:
"},{"location":"faq/#123-companion-radio-firmware","title":"1.2.3. Companion Radio Firmware","text":"Companion radios are for connecting to the Android app or web app as a messenger client. There are two different companion radio firmware versions:
BLE Companion BLE Companion firmware runs on a supported LoRa device and connects to a smart device running the Android or iOS MeshCore client over BLE https://meshcore.co.uk/apps.html
USB Serial Companion USB Serial Companion firmware runs on a supported LoRa device and connects to a smart device or a computer over USB Serial running the MeshCore web client https://meshcore.liamcottle.net/#/ https://client.meshcore.co.uk/tabs/devices
Repeaters are used to extend the range of a MeshCore network. Repeater firmware runs on the same devices that run client firmware. A repeater's job is to forward MeshCore packets to the destination device. It does not forward or retransmit every packet it receives, unlike other LoRa mesh systems.
A repeater can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.
"},{"location":"faq/#125-room-server","title":"1.2.5. Room Server","text":"A room server is a simple BBS server for sharing posts. T-Deck devices running MeshCore firmware or a BLE Companion client connected to a smartphone running the MeshCore app can connect to a room server.
Room servers store message history on them and push the stored messages to users. Room servers allow roaming users to come back later and retrieve message history. With channels, messages are either received when it's sent, or not received and missed if the channel user is out of range. Room servers are different and more like email servers where you can come back later and get your emails from your mail server.
A room server can be remotely administered using a T-Deck running the MeshCore firmware with remote administration features unlocked, or from a BLE Companion client connected to a smartphone running the MeshCore app.
When a client logs into a room server, the client will receive the previously 32 unseen messages.
Although room server can also repeat with the command line command set repeat on, it is not recommended nor encouraged. A room server with repeat set to on lacks the full set of repeater and remote administration features that are only available in the repeater firmware.
The recommendation is to run repeater and room server on separate devices for the best experience.
"},{"location":"faq/#2-initial-setup","title":"2. Initial Setup","text":""},{"location":"faq/#21-q-how-many-devices-do-i-need-to-start-using-meshcore","title":"2.1. Q: How many devices do I need to start using MeshCore?","text":"A: If you have one supported device, flash the BLE Companion firmware and use your device as a client. You can connect to the device using the Android or iOS client via Bluetooth. You can start communicating with other MeshCore users near you.
If you have two supported devices, and there are not many MeshCore users near you, flash both to BLE Companion firmware so you can use your devices to communicate with your near-by friends and family.
If you have two supported devices, and there are other MeshCore users nearby, you can flash one of your devices with BLE Companion firmware and flash another supported device to repeater firmware. Place the repeater high above ground to extend your MeshCore network's reach.
After you flashed the latest firmware onto your repeater device, keep the device connected to your computer via USB serial, use the console feature on the web flasher and set the frequency for your region or country, so your client can remote administer the repeater or room server over RF:
set freq {frequency}
The repeater and room server CLI reference is here: https://github.com/meshcore-dev/MeshCore/wiki/Repeater-&-Room-Server-CLI-Reference
If you have more supported devices, you can use your additional devices with the room server firmware.
"},{"location":"faq/#22-q-does-meshcore-cost-any-money","title":"2.2. Q: Does MeshCore cost any money?","text":"A: All radio firmware versions (e.g. for Heltec V3, RAK, T-1000E, etc) are free and open source developed by Scott at Ripple Radios.
The native Android and iOS client uses the freemium model and is developed by Liam Cottle, developer of meshtastic map at meshtastic.liamcottle.net on GitHub and reticulum-meshchat on github.
The T-Deck firmware is free to download and most features are available without cost. To support the firmware developer, you can pay for a registration key to unlock your T-Deck for deeper map zoom and remote server administration over RF using the T-Deck. You do not need to pay for the registration to use your T-Deck for direct messaging and connecting to repeaters and room servers.
"},{"location":"faq/#23-q-what-frequencies-are-supported-by-meshcore","title":"2.3. Q: What frequencies are supported by MeshCore?","text":"A: It supports the 868MHz range in the UK/EU and the 915MHz range in New Zealand, Australia, and the USA. Countries and regions in these two frequency ranges are also supported.
Use the smartphone client or the repeater setup feature on there web flasher to set your radios' RF settings by choosing the preset for your regions.
Recently, as of October 2025, many regions have moved to the \"narrow\" setting, aka using BW62.5 and a lower SF number (instead of the original SF11). For example, USA/Canada (Recommended) preset is 910.525MHz, SF7, BW62.5, CR5.
After extensive testing, many regions have switched or about to switch over to BW62.5 and SF7, 8, or 9. Narrower bandwidth setting and lower SF setting allow MeshCore's radio signals to fit between interference in the ISM band, provide for a lower noise floor, better SNR, and faster transmissions.
If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on the #meshcore-app channel on the MeshCore Discord server to let Liam Cottle know.
"},{"location":"faq/#24-q-what-is-an-advert-in-meshcore","title":"2.4. Q: What is an \"advert\" in MeshCore?","text":"A: Advert means to advertise yourself on the network. In Reticulum terms it would be to announce. In Meshtastic terms it would be the node sending its node info.
MeshCore allows you to manually broadcast your name, position and public encryption key, which is also signed to prevent spoofing. When you click the advert button, it broadcasts that data over LoRa. MeshCore calls that an Advert. There's two ways to advert, \"zero hop\" and \"flood\".
MeshCore clients only advertise themselves when the user initiates it. A repeater sends a flood advert once every 3 hours by default. This interval can be configured using the following command:
set advert.interval {minutes}
As of Aug 20 2025, a pending PR on github will change the flood advert to 12 hours to minimize airtime utilization caused by repeaters' flood adverts.
"},{"location":"faq/#25-q-is-there-a-hop-limit","title":"2.5. Q: Is there a hop limit?","text":"A: Internally the firmware has maximum limit of 64 hops. In real world settings it will be difficult to get close to the limit due to the environments and timing as packets travel further and further. We want to hear how far your MeshCore conversations go.
"},{"location":"faq/#3-server-administration","title":"3. Server Administration","text":""},{"location":"faq/#31-q-how-do-you-configure-a-repeater-or-a-room-server","title":"3.1. Q: How do you configure a repeater or a room server?","text":"A: - When MeshCore is flashed onto a LoRa device is for the first time, it is necessary to set the server device's frequency to make it utilize the frequency that is legal in your country or region.
Repeater or room server can be administered with one of the options below:
Connect the server device using a USB cable to a computer running Chrome on https://flasher.meshcore.co.uk/, then use the console feature to connect to the device
Use a MeshCore smartphone clients to remotely administer servers via LoRa.
A T-Deck running unlocked/registered MeshCore firmware. Remote server administration is enabled through registering your T-Deck with Ripple Radios. It is one of the ways to support MeshCore development. You can register your T-Deck at:
https://buymeacoffee.com/ripplebiz/e/249834
"},{"location":"faq/#32-q-do-i-need-to-set-the-location-for-a-repeater","title":"3.2. Q: Do I need to set the location for a repeater?","text":"A: While not required, with location set for a repeater it will show up on the MeshCore map in the future. Set location with the following command:
set lat <GPS Lat> set long <GPS Lon>
You can get the latitude and longitude from Google Maps by right-clicking the location you are at on the map.
"},{"location":"faq/#33-q-what-is-the-password-to-administer-a-repeater-or-a-room-server","title":"3.3. Q: What is the password to administer a repeater or a room server?","text":"A: The default admin password to a repeater and room server is password. Use the following command to change the admin password:
password {new-password}
A: The default guest password to a room server is hello. Use the following command to change the guest password:
set guest.password {guest-password}
A: You can issue these commands to get or set a repeater's private key using a USB serial connection.
get prv.key to print a repeater's private key on the serial console set prv.key <hex> to set a repeater's private key on the serial console
Reboot the repeater after set prv.key <hex> command for the new private key to take effect.
A: You can generate a new private key and specific the first byte of its public key here: https://gessaman.com/mc-keygen/
"},{"location":"faq/#37-q-my-repeater-maybe-suffering-from-deafness-due-to-high-power-interference-near-my-meshs-frequency-it-is-not-hearing-other-in-range-meshcore-radios-what-can-i-do","title":"3.7. Q: My repeater maybe suffering from deafness due to high power interference near my mesh's frequency, it is not hearing other in-range MeshCore radios. What can I do?","text":"A: This may be due to the SX1262 radio's auto gain control feature. You can use this command to periodically reset its AGC.
set agc.reset.interval <number>
The <number> unit is in seconds and is incremented by 4. set agc.reset.interval 4 works well to cure deafness.
This is a very low cost operation. AGC reset is done by simply setting state = STATE_IDLE; in function RadioLibWrapper::resetAGC() in RadioLibWrappers.cpp
A: The observer instruction is available here: https://analyzer.letsmesh.net/observer/onboard
"},{"location":"faq/#4-t-deck-related","title":"4. T-Deck Related","text":""},{"location":"faq/#41-q-is-there-a-user-guide-for-t-deck-t-pager-t-watch-or-t-display-pro","title":"4.1. Q: Is there a user guide for T-Deck, T-Pager, T-Watch, or T-Display Pro?","text":"A: Yes, it is available on https://buymeacoffee.com/ripplebiz/ultra-v7-7-guide-meshcore-users
"},{"location":"faq/#42-q-what-are-the-steps-to-get-a-t-deck-into-dfu-device-firmware-update-mode","title":"4.2. Q: What are the steps to get a T-Deck into DFU (Device Firmware Update) mode?","text":"A: 1. Device off 2. Connect USB cable to device 3. Hold down trackball (keep holding) 4. Turn on device 5. Hear USB connection sound 6. Release trackball 7. T-Deck in DFU mode now 8. At this point you can begin flashing using https://flasher.meshcore.co.uk/
"},{"location":"faq/#43-q-why-is-my-t-deck-plus-not-getting-any-satellite-lock","title":"4.3. Q: Why is my T-Deck Plus not getting any satellite lock?","text":"A: For T-Deck Plus, the GPS baud rate should be set to 38400. Also, some T-Deck Plus devices were found to have the GPS module installed upside down, with the GPS antenna facing down instead of up. If your T-Deck Plus still doesn't get any satellite lock after setting the baud rate to 38400, you might need to open the device to check the GPS orientation.
GPS on T-Deck is always enabled. You can skip the \"GPS clock sync\" and the T-Deck will continue to try to get a GPS lock. You can go to the GPS Info screen; you should see the Sentences: counter increasing if the baud rate is correct.
Source
"},{"location":"faq/#44-q-why-is-my-og-non-plus-t-deck-not-getting-any-satellite-lock","title":"4.4. Q: Why is my OG (non-Plus) T-Deck not getting any satellite lock?","text":"A: The OG (non-Plus) T-Deck doesn't come with a GPS. If you added a GPS to your OG T-Deck, please refer to the manual of your GPS to see what baud rate it requires. Alternatively, you can try to set the baud rate from 9600, 19200, etc., and up to 115200 to see which one works.
"},{"location":"faq/#45-q-what-size-of-sd-card-does-the-t-deck-support","title":"4.5. Q: What size of SD card does the T-Deck support?","text":"A: Users have had no issues using 16GB or 32GB SD cards. Format the SD card to FAT32.
"},{"location":"faq/#46-q-what-is-the-public-key-for-the-default-public-channel","title":"4.6. Q: what is the public key for the default public channel?","text":"A: T-Deck uses the same key the smartphone apps use but in base64 izOH6cXN6mrJ5e26oRXNcg==
There is no = key on the T-Deck's hardware keyboard. You can use the on-screen software keyboard to enter =. Tap the text box to enable the on-screen software keyboard. The third character is the capital letter O (Oh), not zero 0
The smartphone app key is in hex: 8b3387e9c5cdea6ac9e5edbaa115cd72
Source
"},{"location":"faq/#47-q-how-do-i-get-maps-on-t-deck","title":"4.7. Q: How do I get maps on T-Deck?","text":"A: You need map tiles. You can get pre-downloaded map tiles here (a good way to support development): - https://buymeacoffee.com/ripplebiz/e/342543 (Europe) - https://buymeacoffee.com/ripplebiz/e/342542 (US)
Another way to download map tiles is to use this Python script to get the tiles in the areas you want: https://github.com/fistulareffigy/MTD-Script
There is also a modified script that adds additional error handling and parallel downloads: https://discord.com/channels/826570251612323860/1330643963501351004/1338775811548905572
UK map tiles are available separately from Andy Kirby on his discord server: https://discord.com/channels/826570251612323860/1330643963501351004/1331346597367386224
"},{"location":"faq/#48-q-where-do-the-map-tiles-go","title":"4.8. Q: Where do the map tiles go?","text":"Once you have the tiles downloaded, copy the \\tiles folder to the root of your T-Deck's SD card.
A: You can download, install, and use the T-Deck firmware for free, but it has some features (map zoom, server administration) that are enabled if you purchase an unlock code for \\$10 per T-Deck device. Unlock page: https://buymeacoffee.com/ripplebiz/e/249834
"},{"location":"faq/#410-q-how-to-decipher-the-diagnostics-screen-on-t-deck","title":"4.10. Q: How to decipher the diagnostics screen on T-Deck?","text":"**A: ** Space is tight on T-Deck's screen, so the information is a bit cryptic. The format is : {hops} l:{packet-length}({payload-len}) t:{packet-type} snr:{n} rssi:{n}
See here for packet-type: https://github.com/meshcore-dev/MeshCore/blob/main/src/Packet.h#L19
#define PAYLOAD_TYPE_REQ 0x00 // request (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob)\n#define PAYLOAD_TYPE_RESPONSE 0x01 // response to REQ or ANON_REQ (prefixed with dest/src hashes, MAC) (enc data: timestamp, blob)\n#define PAYLOAD_TYPE_TXT_MSG 0x02 // a plain text message (prefixed with dest/src hashes, MAC) (enc data: timestamp, text)\n#define PAYLOAD_TYPE_ACK 0x03 // a simple ack #define PAYLOAD_TYPE_ADVERT 0x04 // a node advertising its Identity\n#define PAYLOAD_TYPE_GRP_TXT 0x05 // an (unverified) group text message (prefixed with channel hash, MAC) (enc data: timestamp, \"name: msg\")\n#define PAYLOAD_TYPE_GRP_DATA 0x06 // an (unverified) group datagram (prefixed with channel hash, MAC) (enc data: timestamp, blob)\n#define PAYLOAD_TYPE_ANON_REQ 0x07 // generic request (prefixed with dest_hash, ephemeral pub_key, MAC) (enc data: ...)\n#define PAYLOAD_TYPE_PATH 0x08 // returned path (prefixed with dest/src hashes, MAC) (enc data: path, extra)\nSource
"},{"location":"faq/#411-q-the-t-deck-sound-is-too-loud","title":"4.11. Q: The T-Deck sound is too loud?","text":""},{"location":"faq/#412-q-can-you-customize-the-sound","title":"4.12. Q: Can you customize the sound?","text":"A: You can customise the sounds on the T-Deck, by placing .mp3 files onto the root dir of the SD card. The files are:
startup.mp3error.mp3alert.mp3new-advert.mp3existing-advert.mp3A: 'Import from Clipboard' is for importing a contact via a file named 'clipboard.txt' on the SD card. The opposite, is in the Identity screen, the 'Card to Clipboard' menu, which writes to 'clipboard.txt' so you can share yourself (call these 'biz cards', that start with \"meshcore://...\")
"},{"location":"faq/#414-q-how-to-capture-a-screenshot-on-t-deck","title":"4.14. Q: How to capture a screenshot on T-Deck?","text":"A: To capture a screenshot on a T-Deck, long press the top-left corner of the screen. The screenshot is saved to the microSD card, if one is inserted into the device.
"},{"location":"faq/#5-general","title":"5. General","text":""},{"location":"faq/#51-q-what-are-bw-sf-and-cr","title":"5.1. Q: What are BW, SF, and CR?","text":"A:
BW is bandwidth - width of frequency spectrum that is used for transmission
SF is spreading factor - how much should the communication spread in time
CR is coding rate - from: https://www.thethingsnetwork.org/docs/lorawan/fec-and-code-rate/
TL;DR: default CR to 5 for good stable links. If it is not a solid link and is intermittent, change to CR to 7 or 8.
Forward Error Correction is a process of adding redundant bits to the data to be transmitted. During the transmission, data may get corrupted by interference (changes from 0 to 1 / 1 to 0). These error correction bits are used at the receivers for restoring corrupted bits.
The Code Rate of a forward error correction expresses the proportion of bits in a data stream that actually carry useful information.
There are 4 code rates used in LoRaWAN:
4/5 4/6 5/7 4/8
For example, if the code rate is 5/7, for every 5 bits of useful information, the coder generates a total of 7 bits of data, of which 2 bits are redundant.
Making the bandwidth 2x wider (from BW125 to BW250) allows you to send 2x more bytes in the same time. Making the spreading factor 1 step lower (from SF10 to SF9) allows you to send 2x more bytes in the same time.
Lowering the spreading factor makes it more difficult for the gateway to receive a transmission, as it will be more sensitive to noise. You could compare this to two people taking in a noisy place (a bar for example). If you\u2019re far from each other, you have to talk slow (SF10), but if you\u2019re close, you can talk faster (SF7)
So, it's balancing act between speed of the transmission and resistance to noise. things network is mainly focused on LoRaWAN, but the LoRa low-level stuff still checks out for any LoRa project
"},{"location":"faq/#52-q-do-meshcore-clients-repeat","title":"5.2. Q: Do MeshCore clients repeat?","text":"A: No, MeshCore clients do not repeat. This is the core of MeshCore's messaging-first design. This is to avoid devices flooding the air ware and create endless collisions, so messages sent aren't received. In MeshCore, only repeaters and room server with set repeat on repeat.
A: If you used to reach a node through a repeater and the repeater is no longer reachable, the client will send the message using the existing (but now broken) known path, the message will fail after 3 retries, and the app will reset the path and send the message as flood on the last retry by default. This can be turned off in settings. If the destination is reachable directly or through another repeater, the new path will be used going forward. Or you can set the path manually if you know a specific repeater to use to reach that destination.
In the case if users are moving around frequently, and the paths are breaking, they just see the phone client retries and revert to flood to attempt to re-establish a path.
"},{"location":"faq/#54-q-how-does-a-node-discovery-a-path-to-its-destination-and-then-use-it-to-send-messages-in-the-future-instead-of-flooding-every-message-it-sends-like-meshtastic","title":"5.4. Q: How does a node discovery a path to its destination and then use it to send messages in the future, instead of flooding every message it sends like Meshtastic?","text":"Routes are stored in sender's contact list. When you send a message the first time, the message first gets to your destination by flood routing. When your destination node gets the message, it will send back a delivery report to the sender with all repeaters that the original message went through. This delivery report is flood-routed back to you the sender and is a basis for future direct path. When you send the next message, the path will get embedded into the packet and be evaluated by repeaters. If the hop and address of the repeater matches, it will retransmit the message, otherwise it will not retransmit, hence minimizing utilization.
Source
"},{"location":"faq/#55-q-do-public-channels-always-flood-do-private-channels-always-flood","title":"5.5. Q: Do public channels always flood? Do private channels always flood?","text":"A: Yes, group channels are A to B, so there is no defined path. They have to flood. Repeaters can however deny flood traffic up to some hop limit, with the set flood.max CLI command. Administrators of repeaters get to set the rules of their repeaters.
Source
"},{"location":"faq/#56-q-what-is-the-public-key-for-the-default-public-channel","title":"5.6. Q: what is the public key for the default public channel?","text":"A: The smartphone app key is in hex: 8b3387e9c5cdea6ac9e5edbaa115cd72
T-Deck uses the same key but in base64 izOH6cXN6mrJ5e26oRXNcg== The third character is the capital letter 'O', not zero 0 Source
A: Most of the firmware is freely available. Everything is open source except the T-Deck firmware and Liam's native mobile apps. - Firmware repo: https://github.com/meshcore-dev/MeshCore
"},{"location":"faq/#58-q-how-can-i-support-meshcore","title":"5.8. Q: How can I support MeshCore?","text":"A: Provide your honest feedback on GitHub and on MeshCore Discord server. Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at https://buymeacoffee.com/ripplebiz.
Support Liam Cottle's smartphone client development by unlocking the server administration wait gate with in-app purchase
Support Rastislav Vysoky (recrof)'s flasher web site and the map web site development through PayPal or Revolut
"},{"location":"faq/#59-q-how-do-i-build-meshcore-firmware-from-source","title":"5.9. Q: How do I build MeshCore firmware from source?","text":"A: See instructions here: https://discord.com/channels/826570251612323860/1330643963501351004/1341826372120608769
Build instructions for MeshCore:
For Windows, first install WSL and Python+pip via: https://plainenglish.io/blog/setting-up-python-on-windows-subsystem-for-linux-wsl-26510f1b2d80
(Linux, Windows+WSL) In the terminal/shell:
sudo apt update\nsudo apt install libpython3-dev\nsudo apt install python3-venv\nMac: python3 should be already installed.
Then it should be the same for all platforms:
python3 -m venv meshcore\ncd meshcore && source bin/activate\npip install -U platformio\ngit clone https://github.com/ripplebiz/MeshCore.git\ncd MeshCore\nopen platformio.ini and in [arduino_base] edit the LORA_FREQ=867.5 save, then run:
pio run -e RAK_4631_Repeater\nthen you'll find firmware.zip in .pio/build/RAK_4631_Repeater
Andy also has a video on how to build using VS Code: How to build and flash Meshcore repeater firmware | Heltec V3 https://www.youtube.com/watch?v=WJvg6dt13hk (Link referenced in the Discord post)
"},{"location":"faq/#510-q-are-there-other-meshcore-related-open-source-projects","title":"5.10. Q: Are there other MeshCore related open source projects?","text":"A: Liam Cottle's MeshCore web client and MeshCore Javascript library are open source under MIT license.
Web client: https://github.com/liamcottle/meshcore-web Javascript: https://github.com/liamcottle/meshcore.js
"},{"location":"faq/#511-q-does-meshcore-support-atak","title":"5.11. Q: Does MeshCore support ATAK","text":"A: ATAK is not currently on MeshCore's roadmap.
Meshcore would not be best suited to ATAK because MeshCore: clients do not repeat and therefore you would need a network of repeaters in place will not have a stable path where all clients are constantly moving between repeaters
MeshCore clients would need to reset path constantly and flood traffic across the network which could lead to lots of collisions with something as chatty as ATAK.
This could change in the future if MeshCore develops a client firmware that repeats. Source
"},{"location":"faq/#512-q-how-do-i-add-a-node-to-the-meshcore-map","title":"5.12. Q: How do I add a node to the MeshCore Map","text":"A:
To add a BLE Companion radio, connect to the BLE Companion radio from the MeshCore smartphone app. In the app, tap the 3 dot menu icon at the top right corner, then tap Internet Map. Tap the 3 dot menu icon again and choose Add me to the Map
To add a Repeater or Room Server to the map, go to the Contact List, tap the 3 dot next to the Repeater or Room Server you want to add to the Internet Map, tap Share, then tap Upload to Internet Map.
You can use the same companion (same public key) that you used to add your repeaters or room servers to remove them from the Internet Map.
"},{"location":"faq/#513-q-can-i-use-a-raspberry-pi-to-update-a-meshcore-radio","title":"5.13. Q: Can I use a Raspberry Pi to update a MeshCore radio?","text":"** A:** Yes. Below are the instructions to flash firmware onto a supported LoRa device using a Raspberry Pi over USB serial.
Instructions for nRF devices like RAK, T1000-E, T114 are immediately after the ESP instructions
For ESP-based devices (e.g. Heltec V3) you need: - Download firmware file from flasher.meshcore.co.uk - Go to the web site on a browser, find the section that has the firmware up need - Click the Download button, right click on the file you need, for example, - Heltec_V3_companion_radio_ble-v1.7.1-165fb33.bin - Non-merged bin keeps the existing Bluetooth pairing database - Heltec_v3_companion_radio_usb-v1.7.1-165fb33-merged.bin - Merged bin overwrites everything including the bootloader, existing Bluetooth pairing database, but keeps configurations. - Right click on the file name and copy the link and note it for later use here is an example: https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin - Run: - wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_ble-v1.7.1-165fb33.bin to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, merged bin or non-merged bin - If the above wget command only downloads a very small file (10K bytes instead of more than 100K byte, use this command instead: - wget --user-agent=\"Mozilla/5.0\" --content-disposition \"https://flasher.meshcore.dev/releases/download/companion-v1.7.1/Heltec_v3_companion_radio_usb-v1.7.1-165fb33.bin\" - Confirm the ttyXXXX device path on your Raspberry Pi: - Go to /dev directory, run ls command to find confirm your device path - They are usually /dev/ttyUSB0 for ESP devices - For ESP-based devices, install esptool from the shell: - pip install esptool --break-system-packages - To flash, use the following command: - For non-merged bin: - esptool.py -p /dev/ttyUSB0 --chip esp32-s3 write_flash 0x10000 <non-merged_firmware>.bin - For merged bin: - esptool.py -p /dev/ttyUSB0 --chip esp32-s3 write_flash 0x00000 <merged_firmware>.bin
Instructions for nRF devices:
For nRF devices (e.g. RAK, Heltec T114) you need the following: - Download firmware file from flasher.meshcore.co.uk - Go to the web site on a browser, find the section that has the firmware up need - You need the ZIP version for the adafruit flash tool (below) - Click the Download button, right click on the ZIP file, for example: - RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip - Right click on the file name and copy the link and note it for later use here is an example: https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip - Run: - wget https://flasher.meshcore.dev/releases/download/companion-v1.7.1/RAK_4631_companion_radio_ble-v1.7.1-165fb33.zip to download the firmware file for your device type. or the version you need - USB, BLE, Repeater, Room Server, ZIP file only - Confirm the ttyXXXX device path on your Raspberry Pi: - Go to /dev directory, run ls command to find confirm your device path - They are usually /dev/ttyACM0 for nRF devices - For nRF-based devices, install adafruit-nrfutil - pip install adafruit-nrfutil --break-system-packages - Use this command to flash the nRF device: - adafruit-nrfutil --verbose dfu serial --package RAK_4631_companion_radio_usb-v1.7.1-165fb33.zip -p /dev/ttyACM0 -b 115200 --singlebank --touch 1200
To manage a repeater or room server connected to a Pi over USB serial using shell commands, you need to install picocom. To install picocom, run the following command: - sudo apt install picocom
To start managing your USB serial-connected device using picocom, use the following command: - picocom -b 115200 /dev/ttyUSB0 --imap lfcrlf
From here, reference repeater and room server command line commands on MeshCore github wiki here: - https://github.com/meshcore-dev/MeshCore/wiki/Repeater-&-Room-Server-CLI-Reference
"},{"location":"faq/#514-q-are-there-are-projects-built-around-meshcore","title":"5.14. Q: Are there are projects built around MeshCore?","text":"A: Yes. Some of them are listed below.
"},{"location":"faq/#5141-overview","title":"5.14.1. overview","text":"Some resources that by themselves give overviews about MeshCore related projects:
"},{"location":"faq/#51411-awesome-meshcore","title":"5.14.1.1. awesome-meshcore","text":"A meta website/ git-repository collecting many projects related to MeshCore, grouped by type. See https://github.com/samuk/awesome-meshcore.
"},{"location":"faq/#5142-programming-libraries-command-line-software","title":"5.14.2. programming libraries, command line software","text":""},{"location":"faq/#51421-meshcoremqtt","title":"5.14.2.1. meshcoremqtt","text":"A Python script to send meshcore debug and packet capture data to MQTT for analysis. Cisien's version is a fork of Andrew-a-g's and is being used to to collect data for https://map.w0z.is/messages and https://analyzer.letsmesh.net/ https://github.com/Cisien/meshcoretomqtt https://github.com/Andrew-a-g/meshcoretomqtt
"},{"location":"faq/#51422-meshcore-for-home-assistant","title":"5.14.2.2. MeshCore for Home Assistant","text":"A custom Home Assistant integration for MeshCore mesh radio nodes. It allows you to monitor and control MeshCore nodes via USB, BLE, or TCP connections. https://github.com/awolden/meshcore-ha
"},{"location":"faq/#51423-python-meshcore","title":"5.14.2.3. Python MeshCore","text":"Bindings to access your MeshCore companion radio nodes in python. https://github.com/fdlamotte/meshcore_py
"},{"location":"faq/#51424-meshcore-cli","title":"5.14.2.4. meshcore-cli","text":"CLI interface to MeshCore companion radio over BLE, TCP, or serial. Uses Python MeshCore above. https://github.com/fdlamotte/meshcore-cli
"},{"location":"faq/#51425-meshcorejs","title":"5.14.2.5. meshcore.js","text":"A JavaScript library for interacting with a MeshCore device running the companion radio firmware https://github.com/liamcottle/meshcore.js
"},{"location":"faq/#51426-pymc_core","title":"5.14.2.6. pyMC_core","text":"pyMC_Core is a Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI. https://github.com/rightup/pyMC_core
"},{"location":"faq/#51427-meshcore-packet-decoder","title":"5.14.2.7. MeshCore Packet Decoder","text":"A TypeScript library for decoding MeshCore mesh networking packets with full cryptographic support. Uses WebAssembly (WASM) for Ed25519 key derivation through the orlp/ed25519 library. It powers the MeshCore Packet Analyzer. https://github.com/michaelhart/meshcore-decoder
"},{"location":"faq/#51428-meshcore-pi","title":"5.14.2.8. meshcore-pi","text":"meshcore-pi is another Python port of MeshCore, designed for Raspberry Pi and similar hardware, it talks to LoRa modules over SPI or GPIO. https://github.com/brianwiddas/meshcore-pi
"},{"location":"faq/#51429-pymc_repeater","title":"5.14.2.9. pyMC_Repeater","text":"pyMC_Repeater is a repeater daemon in Python built on top of the pymc_core library. https://github.com/rightup/pyMC_Repeater
A Node.js software that will upload every repeater or room server to map.meshcore.dev when a connected companion hears new advert. https://github.com/recrof/map.meshcore.dev-uploader
"},{"location":"faq/#5143-apps-graphical-software","title":"5.14.3. apps, graphical software","text":""},{"location":"faq/#51431-meshcore-open","title":"5.14.3.1. meshcore-open","text":"Open Source companion app for Android, iOS, GNU/Linux (and maybe other Unixes), Windows, macOS, chromium-based browsers. https://github.com/zjs81/meshcore-open
"},{"location":"faq/#5144-firmwares","title":"5.14.4. firmwares","text":""},{"location":"faq/#51441-meshcore-cardputer-adv","title":"5.14.4.1. MeshCore-Cardputer-ADV","text":"Standalone client firmware for the \"M5Stack Cardputer ADV\" with the \"M5Stack Cap LoRa-1262\" module.
There are two variants:
Multi-protocol mesh firmware for ESP32-S3 LoRa devices (MeshCore, Meshtastic, RNode/KISS (Reticulum)). Protocol is auto-detected from the first bytes over serial or BLE. https://github.com/STCisGOOD/lunarcore
"},{"location":"faq/#51443-mc-term","title":"5.14.4.3. MC-Term","text":"(Soon to be) Open Source companion firmware for LilyGO T-Deck (Plus) and Seeed Studio SenseCap Indicator (TFT / D1Pro), that can be used both standalone and together with a companion app. https://github.com/dabeani/meshcore
"},{"location":"faq/#51444-meck","title":"5.14.4.4. Meck","text":"Companion firmware for LilyGo T-Deck Pro that allows standalone operation and connection to a companion app via Bluetooth Low Energy (BLE). https://github.com/pelgraine/Meck
"},{"location":"faq/#51445-meshcore-for-wio-tracker-l1-pro","title":"5.14.4.5. Meshcore for Wio Tracker L1 Pro","text":"Companion firmware for Seeed Studio Wio Tracker L1 Pro with specific UI adjustments that can be used standalone. https://github.com/sosprz/Meshcore-Wio-Tracker-L1-Pro
"},{"location":"faq/#5145-online-services","title":"5.14.5. online services","text":"(None yet listed here. See overview ressources.)
"},{"location":"faq/#515-q-are-there-client-applications-for-windows-or-mac","title":"5.15. Q: Are there client applications for Windows or Mac?","text":"A: Yes, the same iOS and Android client is also available for Windows and Intel Mac (sorry, not available for ARM-based Mac yet). You can find them together with the Android APK here: https://files.liamcottle.net/MeshCore
Both the Windows and Intel Mac versions of the client app are fully unlocked and are free to use.
"},{"location":"faq/#516-q-are-there-any-resources-that-compare-meshcore-to-other-lora-systems","title":"5.16. Q: Are there any resources that compare MeshCore to other LoRa systems?","text":"A: Here is a list of MeshCore comparison resources: The Comms Channel on YouTube: https://www.youtube.com/watch?v=guDoKGs02Us MeshCore Advantages by MCarper: https://github.com/mikecarper/meshfirmware/blob/main/MeshCoreAdvantages.md Meshcore vs Meshtastic by austinmesh.org https://www.austinmesh.org/learn/meshcore-vs-meshtastic/
"},{"location":"faq/#6-troubleshooting","title":"6. Troubleshooting","text":""},{"location":"faq/#61-q-my-client-says-another-client-or-a-repeater-or-a-room-server-was-last-seen-many-many-days-ago","title":"6.1. Q: My client says another client or a repeater or a room server was last seen many, many days ago.","text":""},{"location":"faq/#62-q-a-repeater-or-a-client-or-a-room-server-i-expect-to-see-on-my-discover-list-on-t-deck-or-contact-list-on-a-smart-device-client-are-not-listed","title":"6.2. Q: A repeater or a client or a room server I expect to see on my discover list (on T-Deck) or contact list (on a smart device client) are not listed.","text":"A: - If your client is a T-Deck, it may not have its time set (no GPS installed, no GPS lock, or wrong GPS baud rate). - If you are using the Android or iOS client, the other client, repeater, or room server may have the wrong time.
You can get the epoch time on https://www.epochconverter.com/ and use it to set your T-Deck clock. For a repeater and room server, the admin can use a T-Deck to remotely set their clock (clock sync), or use the time command in the USB serial console with the server device connected.
A: You can't connect to a device running repeater firmware via Bluetooth. Devices running the BLE companion firmware you can connect to it via Bluetooth using the android app
"},{"location":"faq/#64-q-my-companion-isnt-showing-up-over-bluetooth","title":"6.4. Q: My companion isn't showing up over Bluetooth?","text":"A: make sure that you flashed the Bluetooth companion firmware and not the USB-only companion firmware.
"},{"location":"faq/#65-q-i-cant-connect-via-bluetooth-what-is-the-bluetooth-pairing-code","title":"6.5. Q: I can't connect via Bluetooth, what is the Bluetooth pairing code?","text":"A: the default Bluetooth pairing code is 123456
A: Heltec V3 has a very small coil antenna on its PCB for Wi-Fi and Bluetooth connectivity. It has a very short range, only a few feet. It is possible to remove the coil antenna and replace it with a 31mm wire. The BT range is much improved with the modification.
"},{"location":"faq/#67-q-my-rakt1000-exiao_nrf52-device-seems-to-be-corrupted-how-do-i-wipe-it-clean-to-start-fresh","title":"6.7. Q: My RAK/T1000-E/xiao_nRF52 device seems to be corrupted, how do I wipe it clean to start fresh?","text":"A: 1. Connect USB-C cable to your device, per your device's instruction, get it to flash mode: - For RAK, click the reset button TWICE - For T1000-e, quickly disconnect and reconnect the magnetic side of the cable from the device TWICE - For Heltec T114, click the reset button TWICE (the bottom button) - For Xiao nRF52, click the reset button once. If that doesn't work, quickly double click the reset button twice. If that doesn't work, disconnection the board from your PC and reconnect again (seeed studio wiki) 5. A new folder will appear on your computer's desktop 6. Download the flash_erase*.uf2 file for your device on flasher.meshcore.co.uk - RAK WisBlock and Heltec T114: Flash_erase-nRF32_softdevice_v6.uf2 - Seeed Studio Xiao nRF52 WIO: Flash_erase-nRF52_softdevice_v7.uf2 8. drag and drop the uf2 file for your device to the root of the new folder 9. Wait for the copy to complete. You might get an error dialog, you can ignore it 10. Go to https://flasher.meshcore.co.uk/, click Console and select the serial port for your connected device 11. In the console, press enter. Your flash should now be erased 12. You may now flash the latest MeshCore firmware onto your device
Separately, starting in firmware version 1.7.0, there is a CLI Rescue mode. If your device has a user button (e.g. some RAK, T114), you can activate the rescue mode by hold down the user button of the device within 8 seconds of boot. Then you can use the 'Console' on flasher.meshcore.co.uk
"},{"location":"faq/#68-q-webflasher-fails-on-linux-with-failed-to-open","title":"6.8. Q: WebFlasher fails on Linux with failed to open","text":"A: If the usb port doesn't have the right ownership for this task, the process fails with the following error: NetworkError: Failed to execute 'open' on 'SerialPort': Failed to open serial port.
Allow the browser user on it: # setfacl -m u:YOUR_USER_HERE:rw /dev/ttyUSB0
A: The steps below work on both Android and iOS as nRF has made both apps' user interface the same on both platforms:
nrf dfu, the app's full name is nRF Device Firmware Updatestart ota and hit enter.OK to confirm the repeater device is now in OTA modeSettings on the top right cornerPackets receipt notifications, and change Number of Packets to 10 for RAK, 8 for T114. 8 also works for RAK.OTA on the device againForce Scanning in the DFU appUpload to begin OTA updateA: You can flash this safer bootloader to the Wio Tracker L1 Pro https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX
After this bootloader is flashed onto the device, you can trigger over the air update using bluetooth by holding the button next to the D-Pad and then click the reset button. The follow the same OTA update instructions above. You can skip pass the start ota instruction and start the update using the DFU app.
A: For ESP32-based devices (e.g. Heltec V3): 1. On flasher.meshcore.co.uk, download the non-merged version of the firmware for your ESP32 device (e.g. Heltec_v3_repeater-v1.6.2-4449fd3.bin, no \"merged\" in the file name) 2. From the MeshCore app, login remotely to the repeater you want to update with admin privilege 4. Go to the Command Line tab, type start ota and hit enter. 5. you should see OK to confirm the repeater device is now in OTA mode 6. The command start ota on an ESP32-based device starts a wifi hotspot named MeshCore OTA 7. From your phone or computer connect to the 'MeshCore OTA' hotspot 8. From a browser, go to http://192.168.4.1/update and upload the non-merged bin from the flasher
A: Yes, developer che aporeps has an enhanced OTA DFU bootloader for nRF52 based devices. With this bootloader, if it detects that the application firmware is invalid, it falls back to OTA DFU mode so you can attempt to flash again to recover. This bootloader has other changes to make the OTA DFU process more fault tolerant.
Refer to https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX for the latest information.
Currently, the following boards are supported: - Heltec Automation Mesh Node T114 / HT-nRF5262 - Nologo ProMicro NRF52840 (aka SuperMini NRF52840) - Seeed Studio SenseCAP Card Tracker T1000-E - Seeed Studio Wio Tracker L1 - Seeed Studio XIAO nRF52840 BLE - Seeed Studio XIAO nRF52840 BLE SENSE - RAK 4631 (See note) - RAK WisMesh Tag (new 28/11/2025)
"},{"location":"faq/#74-q-are-the-meshcore-logo-and-font-available","title":"7.4. Q: are the MeshCore logo and font available?","text":"A: Yes, it is on the MeshCore github repo here: https://github.com/meshcore-dev/MeshCore/tree/main/logo
"},{"location":"faq/#75-q-what-is-the-format-of-a-contact-or-channel-qr-code","title":"7.5. Q: What is the format of a contact or channel QR code?","text":"A: Channel: meshcore://channel/add?name=<name>&secret=<secret>
Contact: meshcore://contact/add?name=<name>&public_key=<secret>&type=<type>
where &type is: chat = 1 repeater = 2 room = 3 sensor = 4
A: WiFi firmware requires you to compile it yourself, as you need to set the wifi ssid and password. Edit WIFI_SSID and WIFI_PWD in ./variants/heltec_v3/platformio.ini and then flash it to your device.
A: For companion radios, you can set these radios' transmit power in the smartphone app. For repeater and room server radios, you can set their transmit power using the command line command set tx. You can get their current value using command line comand get tx
Standard KISS TNC firmware for MeshCore LoRa radios. Compatible with any KISS client (Direwolf, APRSdroid, YAAC, etc.) for sending and receiving raw packets. MeshCore-specific extensions (cryptography, radio configuration, telemetry) are available through the standard SetHardware (0x06) command.
"},{"location":"kiss_modem_protocol/#serial-configuration","title":"Serial Configuration","text":"115200 baud, 8N1, no flow control.
"},{"location":"kiss_modem_protocol/#frame-format","title":"Frame Format","text":"Standard KISS framing per the KA9Q/K3MC specification.
Byte Name Description0xC0 FEND Frame delimiter 0xDB FESC Escape character 0xDC TFEND Escaped FEND (FESC + TFEND = 0xC0) 0xDD TFESC Escaped FESC (FESC + TFESC = 0xDB) \u250c\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2510\n\u2502 FEND \u2502 Type Byte \u2502 Data (escaped)\u2502 FEND \u2502\n\u2502 0xC0 \u2502 1 byte \u2502 0-510 bytes \u2502 0xC0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2518\nThe type byte is split into two nibbles:
Bits Field Description 7-4 Port Port number (0 for single-port TNC) 3-0 Command Command numberMaximum unescaped frame size: 512 bytes.
"},{"location":"kiss_modem_protocol/#standard-kiss-commands","title":"Standard KISS Commands","text":""},{"location":"kiss_modem_protocol/#host-to-tnc","title":"Host to TNC","text":"Command Value Data Description Data0x00 Raw packet Queue packet for transmission TXDELAY 0x01 Delay (1 byte) Transmitter keyup delay in 10ms units (default: 50 = 500ms) Persistence 0x02 P (1 byte) CSMA persistence parameter 0-255 (default: 63) SlotTime 0x03 Interval (1 byte) CSMA slot interval in 10ms units (default: 10 = 100ms) TXtail 0x04 Delay (1 byte) Post-TX hold time in 10ms units (default: 0) FullDuplex 0x05 Mode (1 byte) 0 = half duplex, nonzero = full duplex (default: 0) SetHardware 0x06 Sub-command + data MeshCore extensions (see below) Return 0xFF - Exit KISS mode (no-op)"},{"location":"kiss_modem_protocol/#tnc-to-host","title":"TNC to Host","text":"Type Value Data Description Data 0x00 Raw packet Received packet from radio Data frames carry raw packet data only, with no metadata prepended. The Data command payload is limited to 255 bytes to match the MeshCore maximum transmission unit (MAX_TRANS_UNIT); frames larger than 255 bytes are silently dropped. The KISS specification recommends at least 1024 bytes for general-purpose TNCs; this modem is intended for MeshCore packets only, whose protocol MTU is 255 bytes.
"},{"location":"kiss_modem_protocol/#csma-behavior","title":"CSMA Behavior","text":"The TNC implements p-persistent CSMA for half-duplex operation:
In full-duplex mode, CSMA is bypassed and packets transmit after TXDELAY.
"},{"location":"kiss_modem_protocol/#sethardware-extensions-0x06","title":"SetHardware Extensions (0x06)","text":"MeshCore-specific functionality uses the standard KISS SetHardware command. The first byte of SetHardware data is a sub-command. Standard KISS clients ignore these frames.
"},{"location":"kiss_modem_protocol/#frame-format_1","title":"Frame Format","text":"\u250c\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2510\n\u2502 FEND \u2502 0x06 \u2502 Sub-command \u2502 Data (escaped)\u2502 FEND \u2502\n\u2502 0xC0 \u2502 \u2502 1 byte \u2502 variable \u2502 0xC0 \u2502\n\u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2534\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n0x01 - GetRandom 0x02 Length (1 byte, 1-64) VerifySignature 0x03 PubKey (32) + Signature (64) + Data SignData 0x04 Data to sign EncryptData 0x05 Key (32) + Plaintext DecryptData 0x06 Key (32) + MAC (2) + Ciphertext KeyExchange 0x07 Remote PubKey (32) Hash 0x08 Data to hash SetRadio 0x09 Freq (4) + BW (4) + SF (1) + CR (1) SetTxPower 0x0A Power dBm (1) GetRadio 0x0B - GetTxPower 0x0C - GetCurrentRssi 0x0D - IsChannelBusy 0x0E - GetAirtime 0x0F Packet length (1) GetNoiseFloor 0x10 - GetVersion 0x11 - GetStats 0x12 - GetBattery 0x13 - GetMCUTemp 0x14 - GetSensors 0x15 Permissions (1) GetDeviceName 0x16 - Ping 0x17 - Reboot 0x18 - SetSignalReport 0x19 Enable (1): 0x00=disable, nonzero=enable GetSignalReport 0x1A -"},{"location":"kiss_modem_protocol/#response-sub-commands-tnc-to-host","title":"Response Sub-commands (TNC to Host)","text":"Response codes use the high-bit convention: response = command | 0x80. Generic and unsolicited responses use the 0xF0+ range.
0x81 PubKey (32) Random 0x82 Random bytes (1-64) Verify 0x83 Result (1): 0x00=invalid, 0x01=valid Signature 0x84 Signature (64) Encrypted 0x85 MAC (2) + Ciphertext Decrypted 0x86 Plaintext SharedSecret 0x87 Shared secret (32) Hash 0x88 SHA-256 hash (32) Radio 0x8B Freq (4) + BW (4) + SF (1) + CR (1) TxPower 0x8C Power dBm (1) CurrentRssi 0x8D RSSI dBm (1, signed) ChannelBusy 0x8E Result (1): 0x00=clear, 0x01=busy Airtime 0x8F Milliseconds (4) NoiseFloor 0x90 dBm (2, signed) Version 0x91 Version (1) + Reserved (1) Stats 0x92 RX (4) + TX (4) + Errors (4) Battery 0x93 Millivolts (2) MCUTemp 0x94 Temperature (2, signed) Sensors 0x95 CayenneLPP payload DeviceName 0x96 Name (variable, UTF-8) Pong 0x97 - SignalReport 0x9A Status (1): 0x00=disabled, 0x01=enabled OK 0xF0 - Error 0xF1 Error code (1) TxDone 0xF8 Result (1): 0x00=failed, 0x01=success RxMeta 0xF9 SNR (1) + RSSI (1)"},{"location":"kiss_modem_protocol/#error-codes","title":"Error Codes","text":"Code Value Description InvalidLength 0x01 Request data too short InvalidParam 0x02 Invalid parameter value NoCallback 0x03 Feature not available MacFailed 0x04 MAC verification failed UnknownCmd 0x05 Unknown sub-command EncryptFailed 0x06 Encryption failed"},{"location":"kiss_modem_protocol/#unsolicited-events","title":"Unsolicited Events","text":"The TNC sends these SetHardware frames without a preceding request:
TxDone (0xF8): Sent after a packet has been transmitted. Contains a single byte: 0x01 for success, 0x00 for failure.
RxMeta (0xF9): Sent immediately after each standard data frame (type 0x00) with metadata for the received packet. Contains SNR (1 byte, signed, value x4 for 0.25 dB precision) followed by RSSI (1 byte, signed, dBm). Enabled by default; can be toggled with SetSignalReport. Standard KISS clients ignore this frame.
"},{"location":"kiss_modem_protocol/#data-formats","title":"Data Formats","text":""},{"location":"kiss_modem_protocol/#radio-parameters-setradio-radio-response","title":"Radio Parameters (SetRadio / Radio response)","text":"All values little-endian.
Field Size Description Frequency 4 bytes Hz (e.g., 869618000) Bandwidth 4 bytes Hz (e.g., 62500) SF 1 byte Spreading factor (5-12) CR 1 byte Coding rate (5-8)"},{"location":"kiss_modem_protocol/#version-version-response","title":"Version (Version response)","text":"Field Size Description Version 1 byte Firmware version Reserved 1 byte Always 0"},{"location":"kiss_modem_protocol/#encrypted-encrypted-response","title":"Encrypted (Encrypted response)","text":"Field Size Description MAC 2 bytes HMAC-SHA256 truncated to 2 bytes Ciphertext variable AES-128-CBC encrypted data"},{"location":"kiss_modem_protocol/#airtime-airtime-response","title":"Airtime (Airtime response)","text":"All values little-endian.
Field Size Description Airtime 4 bytes uint32_t, estimated air time in milliseconds"},{"location":"kiss_modem_protocol/#noise-floor-noisefloor-response","title":"Noise Floor (NoiseFloor response)","text":"All values little-endian.
Field Size Description Noise floor 2 bytes int16_t, dBm (signed)The modem recalibrates the noise floor every 2 seconds with an AGC reset every 30 seconds.
"},{"location":"kiss_modem_protocol/#stats-stats-response","title":"Stats (Stats response)","text":"All values little-endian.
Field Size Description RX 4 bytes Packets received TX 4 bytes Packets transmitted Errors 4 bytes Receive errors"},{"location":"kiss_modem_protocol/#battery-battery-response","title":"Battery (Battery response)","text":"All values little-endian.
Field Size Description Millivolts 2 bytes uint16_t, battery voltage in mV"},{"location":"kiss_modem_protocol/#mcu-temperature-mcutemp-response","title":"MCU Temperature (MCUTemp response)","text":"All values little-endian.
Field Size Description Temperature 2 bytes int16_t, tenths of \u00b0C (e.g., 253 = 25.3\u00b0C)Returns NoCallback error if the board does not support temperature readings.
Sends an OK response, flushes serial, then reboots the device. The host should expect the connection to drop.
0x01 Base (battery) 1 0x02 Location (GPS) 2 0x04 Environment (temp, humidity, pressure) Use 0x07 for all permissions.
Data returned in CayenneLPP format. See CayenneLPP documentation for parsing.
"},{"location":"kiss_modem_protocol/#cryptographic-algorithms","title":"Cryptographic Algorithms","text":"Operation Algorithm Identity / Signing / Verification Ed25519 Key Exchange X25519 (ECDH) Encryption AES-128-CBC + HMAC-SHA256 (MAC truncated to 2 bytes) Hashing SHA-256"},{"location":"kiss_modem_protocol/#notes","title":"Notes","text":"The nRF52 Power Management module provides battery protection features to prevent over-discharge, minimise likelihood of brownout and flash corruption conditions existing, and enable safe voltage-based recovery.
"},{"location":"nrf52_power_management/#features","title":"Features","text":""},{"location":"nrf52_power_management/#boot-voltage-protection","title":"Boot Voltage Protection","text":"Shutdown reason codes (stored in GPREGRET2): | Code | Name | Description | |------|------|-------------| | 0x00 | NONE | Normal boot / no previous shutdown | | 0x4C | LOW_VOLTAGE | Runtime low voltage threshold reached | | 0x55 | USER | User requested powerOff() | | 0x42 | BOOT_PROTECT | Boot voltage protection triggered |
"},{"location":"nrf52_power_management/#supported-boards","title":"Supported Boards","text":"Board Implemented LPCOMP wake VBUS wake Seeed Studio XIAO nRF52840 (xiao_nrf52) Yes Yes Yes RAK4631 (rak4631) Yes Yes Yes Heltec T114 (heltec_t114) Yes Yes Yes Promicro nRF52840 No No No RAK WisMesh Tag No No No Heltec Mesh Solar No No No LilyGo T-Echo / T-Echo Lite No No No SenseCAP Solar No No No WIO Tracker L1 / L1 E-Ink No No No WIO WM1110 No No No Mesh Pocket No No No Nano G2 Ultra No No No ThinkNode M1/M3/M6 No No No T1000-E No No No Ikoka Nano/Stick/Handheld (nRF) No No No Keepteen LT1 No No No Minewsemi ME25LS01 No No No Notes: - \"Implemented\" reflects Phase 1 (boot lockout + shutdown reason capture). - User power-off on Heltec T114 does not enable LPCOMP wake. - VBUS detection is used to skip boot lockout on external power, and VBUS wake is configured alongside LPCOMP when supported hardware exposes VBUS to the nRF52.
"},{"location":"nrf52_power_management/#technical-details","title":"Technical Details","text":""},{"location":"nrf52_power_management/#architecture","title":"Architecture","text":"The power management functionality is integrated into the NRF52Board base class in src/helpers/NRF52Board.cpp. Board variants provide hardware-specific configuration via a PowerMgtConfig struct and override initiateShutdown(uint8_t reason) to perform board-specific power-down work and conditionally enable voltage wake (LPCOMP + VBUS).
A static constructor with priority 101 in NRF52Board.cpp captures the RESETREAS and GPREGRET2 registers before: - SystemInit() (priority 102) - which clears RESETREAS - Static C++ constructors (default priority 65535)
This ensures we capture the true reset reason before any initialisation code runs.
"},{"location":"nrf52_power_management/#board-implementation","title":"Board Implementation","text":"To enable power management on a board variant:
Enable in platformio.ini: ini -D NRF52_POWER_MANAGEMENT
Define configuration in variant.h: c #define PWRMGT_VOLTAGE_BOOTLOCK 3300 // Won't boot below this voltage (mV) #define PWRMGT_LPCOMP_AIN 7 // AIN channel for voltage sensing #define PWRMGT_LPCOMP_REFSEL 2 // REFSEL (0-6=1/8..7/8, 7=ARef, 8-15=1/16..15/16)
Implement in board .cpp file: ```cpp #ifdef NRF52_POWER_MANAGEMENT const PowerMgtConfig power_config = { .lpcomp_ain_channel = PWRMGT_LPCOMP_AIN, .lpcomp_refsel = PWRMGT_LPCOMP_REFSEL, .voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK };
void MyBoard::initiateShutdown(uint8_t reason) { // Board-specific shutdown preparation (e.g., disable peripherals) bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE || reason == SHUTDOWN_REASON_BOOT_PROTECT);
if (enable_lpcomp) {\n configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel);\n }\n\n enterSystemOff(reason);\n} #endif
void MyBoard::begin() { NRF52Board::begin(); // or NRF52BoardDCDC::begin() // ... board setup ...
#ifdef NRF52_POWER_MANAGEMENT checkBootVoltage(&power_config); #endif } ```
For user-initiated shutdowns, powerOff() remains board-specific. Power management only arms LPCOMP for automated shutdown reasons (boot protection/low voltage).
cpp #ifdef NRF52_POWER_MANAGEMENT void initiateShutdown(uint8_t reason) override; #endifThe LPCOMP (Low Power Comparator) is configured to: - Monitor the specified AIN channel (0-7 corresponding to P0.02-P0.05, P0.28-P0.31) - Compare against VDD fraction reference (REFSEL: 0-6=1/8..7/8, 7=ARef, 8-15=1/16..15/16) - Detect UP events (voltage rising above threshold) - Use 50mV hysteresis for noise immunity - Wake the device from SYSTEMOFF when triggered
VBUS wake is enabled via the POWER peripheral USBDETECTED event whenever configureVoltageWake() is used. This requires USB VBUS to be routed to the nRF52 (typical on nRF52840 boards with native USB).
LPCOMP Reference Selection (PWRMGT_LPCOMP_REFSEL): | REFSEL | Fraction | VBAT @ 1M/1M divider (VDD=3.0-3.3) | VBAT @ 1.5M/1M divider (VDD=3.0-3.3) | |--------|----------|------------------------------------|--------------------------------------| | 0 | 1/8 | 0.75-0.82 V | 0.94-1.03 V | | 1 | 2/8 | 1.50-1.65 V | 1.88-2.06 V | | 2 | 3/8 | 2.25-2.47 V | 2.81-3.09 V | | 3 | 4/8 | 3.00-3.30 V | 3.75-4.12 V | | 4 | 5/8 | 3.75-4.12 V | 4.69-5.16 V | | 5 | 6/8 | 4.50-4.95 V | 5.62-6.19 V | | 6 | 7/8 | 5.25-5.77 V | 6.56-7.22 V | | 7 | ARef | - | - | | 8 | 1/16 | 0.38-0.41 V | 0.47-0.52 V | | 9 | 3/16 | 1.12-1.24 V | 1.41-1.55 V | | 10 | 5/16 | 1.88-2.06 V | 2.34-2.58 V | | 11 | 7/16 | 2.62-2.89 V | 3.28-3.61 V | | 12 | 9/16 | 3.38-3.71 V | 4.22-4.64 V | | 13 | 11/16 | 4.12-4.54 V | 5.16-5.67 V | | 14 | 13/16 | 4.88-5.36 V | 6.09-6.70 V | | 15 | 15/16 | 5.62-6.19 V | 7.03-7.73 V |
Important: For boards with a voltage divider on the battery sense pin, LPCOMP measures the divided voltage. Use: VBAT_threshold \u2248 (VDD * fraction) * divider_scale, where divider_scale = (Rtop + Rbottom) / Rbottom (e.g., 2.0 for 1M/1M, 2.5 for 1.5M/1M, 3.0 for XIAO).
The power management code checks whether SoftDevice is enabled and uses the appropriate API: - When SD enabled: sd_power_* functions - When SD disabled: Direct register access (NRF_POWER->*)
This ensures compatibility regardless of BLE stack state.
"},{"location":"nrf52_power_management/#cli-commands","title":"CLI Commands","text":"Power management status can be queried via the CLI:
Command Descriptionget pwrmgt.support Returns \"supported\" or \"unsupported\" get pwrmgt.source Returns current power source - \"battery\" or \"external\" (5V/USB power) get pwrmgt.bootreason Returns reset and shutdown reason strings get pwrmgt.bootmv Returns boot voltage in millivolts On boards without power management enabled, all commands except get pwrmgt.support return:
ERROR: Power management not supported\nWhen MESH_DEBUG=1 is enabled, the power management module outputs:
DEBUG: PWRMGT: Reset = Wake from LPCOMP (0x20000); Shutdown = Low Voltage (0x4C)\nDEBUG: PWRMGT: Boot voltage = 3450 mV (threshold = 3300 mV)\nDEBUG: PWRMGT: LPCOMP wake configured (AIN7, ref=3/8 VDD)\nThis document describes the MeshCore packet format.
0xYY indicates YY in hex notation.0bYY indicates YY in binary notation.0000000XX0000000This is the protocol level packet structure used in MeshCore firmware v1.12.0
[header][transport_codes(optional)][path_length][path][payload]\n0bVVPPPPRR - V=Version - P=PayloadType - R=RouteType0x00/0b00 - ROUTE_TYPE_TRANSPORT_FLOOD - Flood Routing + Transport Codes0x01/0b01 - ROUTE_TYPE_FLOOD - Flood Routing0x02/0b10 - ROUTE_TYPE_DIRECT - Direct Routing0x03/0b11 - ROUTE_TYPE_TRANSPORT_DIRECT - Direct Routing + Transport Codes0x00/0b0000 - PAYLOAD_TYPE_REQ - Request (destination/source hashes + MAC)0x01/0b0001 - PAYLOAD_TYPE_RESPONSE - Response to REQ or ANON_REQ0x02/0b0010 - PAYLOAD_TYPE_TXT_MSG - Plain text message0x03/0b0011 - PAYLOAD_TYPE_ACK - Acknowledgment0x04/0b0100 - PAYLOAD_TYPE_ADVERT - Node advertisement0x05/0b0101 - PAYLOAD_TYPE_GRP_TXT - Group text message (unverified)0x06/0b0110 - PAYLOAD_TYPE_GRP_DATA - Group datagram (unverified)0x07/0b0111 - PAYLOAD_TYPE_ANON_REQ - Anonymous request0x08/0b1000 - PAYLOAD_TYPE_PATH - Returned path0x09/0b1001 - PAYLOAD_TYPE_TRACE - Trace a path, collecting SNR for each hop0x0A/0b1010 - PAYLOAD_TYPE_MULTIPART - Packet is part of a sequence of packets0x0B/0b1011 - PAYLOAD_TYPE_CONTROL - Control packet data (unencrypted)0x0C/0b1100 - reserved0x0D/0b1101 - reserved0x0E/0b1110 - reserved0x0F/0b1111 - PAYLOAD_TYPE_RAW_CUSTOM - Custom packet (raw bytes, custom encryption)0x00/0b00 - v1 - 1-byte src/dest hashes, 2-byte MAC0x01/0b01 - v2 - Future version (e.g., 2-byte hashes, 4-byte MAC)0x02/0b10 - v3 - Future version0x03/0b11 - v4 - Future versiontransport_codes - 4 bytes (optional)ROUTE_TYPE_TRANSPORT_FLOOD and ROUTE_TYPE_TRANSPORT_DIRECTtransport_code_1 - 2 bytes - uint16_t - calculated from region scopetransport_code_2 - 2 bytes - uint16_t - reservedpath_length - 1 byte - Length of the path field in bytespath - size provided by path_length - Path to use for Direct RoutingMAX_PATH_SIZEpath_length larger than 64payload - variable length - Payload DataMAX_PACKET_PAYLOADpayload sizes larger than 184MAX_PATH_SIZE) Stores the routing path if applicable payload up to 184 (MAX_PACKET_PAYLOAD) Data for the provided Payload Type NOTE: see the Payloads documentation for more information about the content of specific payload types.
"},{"location":"packet_format/#header-format","title":"Header Format","text":"Bit 0 means the lowest bit (1s place)
Bits Mask Field Description 0-10x03 Route Type Flood, Direct, etc 2-5 0x3C Payload Type Request, Response, ACK, etc 6-7 0xC0 Payload Version Versioning of the payload format"},{"location":"packet_format/#route-types","title":"Route Types","text":"Value Name Description 0x00 ROUTE_TYPE_TRANSPORT_FLOOD Flood Routing + Transport Codes 0x01 ROUTE_TYPE_FLOOD Flood Routing 0x02 ROUTE_TYPE_DIRECT Direct Routing 0x03 ROUTE_TYPE_TRANSPORT_DIRECT Direct Routing + Transport Codes"},{"location":"packet_format/#payload-types","title":"Payload Types","text":"Value Name Description 0x00 PAYLOAD_TYPE_REQ Request (destination/source hashes + MAC) 0x01 PAYLOAD_TYPE_RESPONSE Response to REQ or ANON_REQ 0x02 PAYLOAD_TYPE_TXT_MSG Plain text message 0x03 PAYLOAD_TYPE_ACK Acknowledgment 0x04 PAYLOAD_TYPE_ADVERT Node advertisement 0x05 PAYLOAD_TYPE_GRP_TXT Group text message (unverified) 0x06 PAYLOAD_TYPE_GRP_DATA Group datagram (unverified) 0x07 PAYLOAD_TYPE_ANON_REQ Anonymous request 0x08 PAYLOAD_TYPE_PATH Returned path 0x09 PAYLOAD_TYPE_TRACE Trace a path, collecting SNR for each hop 0x0A PAYLOAD_TYPE_MULTIPART Packet is part of a sequence of packets 0x0B PAYLOAD_TYPE_CONTROL Control packet data (unencrypted) 0x0C reserved reserved 0x0D reserved reserved 0x0E reserved reserved 0x0F PAYLOAD_TYPE_RAW_CUSTOM Custom packet (raw bytes, custom encryption)"},{"location":"packet_format/#payload-versions","title":"Payload Versions","text":"Value Version Description 0x00 1 1-byte src/dest hashes, 2-byte MAC 0x01 2 Future version (e.g., 2-byte hashes, 4-byte MAC) 0x02 3 Future version 0x03 4 Future version"},{"location":"payloads/","title":"Payload Format","text":"Inside each MeshCore Packet is a payload, identified by the payload type in the packet header. The types of payloads are:
This document defines the structure of each of these payload types.
NOTE: all 16 and 32-bit integer fields are Little Endian.
"},{"location":"payloads/#important-concepts","title":"Important concepts:","text":"This kind of payload notifies receivers that a node exists, and gives information about the node
Field Size (bytes) Description public key 32 Ed25519 public key of the node timestamp 4 unix timestamp of advertisement signature 64 Ed25519 signature of public key, timestamp, and app data appdata rest of payload optional, see belowAppdata
Field Size (bytes) Description flags 1 specifies which of the fields are present, see below latitude 4 (optional) decimal latitude multiplied by 1000000, integer longitude 4 (optional) decimal longitude multiplied by 1000000, integer feature 1 2 (optional) reserved for future use feature 2 2 (optional) reserved for future use name rest of appdata name of the nodeAppdata Flags
Value Name Description0x01 is chat node advert is for a chat node 0x02 is repeater advert is for a repeater 0x03 is room server advert is for a room server 0x04 is sensor advert is for a sensor server 0x10 has location appdata contains lat/long information 0x20 has feature 1 Reserved for future use. 0x40 has feature 2 Reserved for future use. 0x80 has name appdata contains a node name"},{"location":"payloads/#acknowledgement","title":"Acknowledgement","text":"An acknowledgement that a message was received. Note that for returned path messages, an acknowledgement can be sent in the \"extra\" payload (see Returned Path) instead of as a separate ackowledgement packet. CLI commands do not cause acknowledgement responses, neither discrete nor extra.
Field Size (bytes) Description checksum 4 CRC checksum of message timestamp, text, and sender pubkey"},{"location":"payloads/#returned-path-request-response-and-plain-text-message","title":"Returned path, request, response, and plain text message","text":"Returned path, request, response, and plain text messages are all formatted in the same way. See the subsection for more details about the ciphertext's associated plaintext representation.
Field Size (bytes) Description destination hash 1 first byte of destination node public key source hash 1 first byte of source node public key cipher MAC 2 MAC for encrypted data in next field ciphertext rest of payload encrypted message, see subsections below for details"},{"location":"payloads/#returned-path","title":"Returned path","text":"Returned path messages provide a description of the route a packet took from the original author. Receivers will send returned path messages to the author of the original message.
Field Size (bytes) Description path length 1 length of next field path see above a list of node hashes (one byte each) extra type 1 extra, bundled payload type, eg., acknowledgement or response. Same values as in Packet Format extra rest of data extra, bundled payload content, follows same format as main content defined by this document"},{"location":"payloads/#request","title":"Request","text":"Field Size (bytes) Description timestamp 4 send time (unix timestamp) request type 1 see below request data rest of payload depends on request typeRequest type
Value Name Description0x01 get stats get stats of repeater or room server 0x02 keepalive (deprecated) 0x03 get telemetry data TODO 0x04 get min,max,avg data sensor nodes - get min, max, average for given time span 0x05 get access list get node's approved access list 0x06 get neighbors get repeater node's neighbors 0x07 get owner info get repeater firmware-ver/name/owner info"},{"location":"payloads/#get-stats","title":"Get stats","text":"Gets information about the node, possibly including the following:
Request data about sensors on the node, including battery level.
"},{"location":"payloads/#get-telemetry","title":"Get Telemetry","text":"TODO
"},{"location":"payloads/#get-minmaxave-sensor-nodes","title":"Get Min/Max/Ave (Sensor nodes)","text":"TODO
"},{"location":"payloads/#get-access-list","title":"Get Access List","text":"TODO
"},{"location":"payloads/#get-neighors","title":"Get Neighors","text":"TODO
"},{"location":"payloads/#get-owner-info","title":"Get Owner Info","text":"TODO
"},{"location":"payloads/#response","title":"Response","text":"Field Size (bytes) Description tag 4 TODO content rest of payload TODO"},{"location":"payloads/#plain-text-message","title":"Plain text message","text":"Field Size (bytes) Description timestamp 4 send time (unix timestamp) txt_type + attempt 1 upper six bits are txt_type (see below), lower two bits are attempt number (0..3) message rest of payload the message content, see next tabletxt_type
Value Description Message content0x00 plain text message the plain text of the message 0x01 CLI command the command text of the message 0x02 signed plain text message first four bytes is sender pubkey prefix, followed by plain text message"},{"location":"payloads/#anonymous-request","title":"Anonymous request","text":"Field Size (bytes) Description destination hash 1 first byte of destination node public key public key 32 sender's Ed25519 public key cipher MAC 2 MAC for encrypted data in next field ciphertext rest of payload encrypted message, see below for details"},{"location":"payloads/#room-server-login","title":"Room server login","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) sync timestamp 4 sender's \"sync messages SINCE x\" timestamp password rest of message password for room"},{"location":"payloads/#repeatersensor-login","title":"Repeater/Sensor login","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) password rest of message password for repeater/sensor"},{"location":"payloads/#repeater-regions-request","title":"Repeater - Regions request","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) req type 1 0x01 (request sub type) reply path len 1 path len for reply reply path (variable) reply path"},{"location":"payloads/#repeater-owner-info-request","title":"Repeater - Owner info request","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) req type 1 0x02 (request sub type) reply path len 1 path len for reply reply path (variable) reply path"},{"location":"payloads/#repeater-clock-and-status-request","title":"Repeater - Clock and status request","text":"Field Size (bytes) Description timestamp 4 sender time (unix timestamp) req type 1 0x03 (request sub type) reply path len 1 path len for reply reply path (variable) reply path"},{"location":"payloads/#group-text-message-datagram","title":"Group text message / datagram","text":"Field Size (bytes) Description channel hash 1 first byte of SHA256 of channel's shared key cipher MAC 2 MAC for encrypted data in next field ciphertext rest of payload encrypted message, see below for details The plaintext contained in the ciphertext matches the format described in plain text message. Specifically, it consists of a four byte timestamp, a flags byte, and the message. The flags byte will generally be 0x00 because it is a \"plain text message\". The message will be of the form <sender name>: <message body> (eg., user123: I'm on my way).
Custom packets have no defined format.
"},{"location":"qr_codes/","title":"QR Codes","text":"This document provides an overview of QR Code formats that can be used for sharing MeshCore channels and contacts. The formats described below are supported by the MeshCore mobile app.
"},{"location":"qr_codes/#add-channel","title":"Add Channel","text":"Example URL:
meshcore://channel/add?name=Public&secret=8b3387e9c5cdea6ac9e5edbaa115cd72\nParameters:
name: Channel name (URL-encoded if needed)secret: 16-byte secret represented as 32 hex charactersExample URL:
meshcore://contact/add?name=Example+Contact&public_key=9cd8fcf22a47333b591d96a2b848b73f457b1bb1a3ea2453a885f9e5787765b1&type=1\nParameters:
name: Contact name (URL-encoded if needed)public_key: 32-byte public key represented as 64 hex characterstype: numeric contact type1: Companion2: Repeater3: Room Server4: SensorBinary frame structures for companion radio stats commands. All multi-byte integers use little-endian byte order.
"},{"location":"stats_binary_frames/#command-codes","title":"Command Codes","text":"Command Code DescriptionCMD_GET_STATS 56 Get statistics (2-byte command: code + sub-type)"},{"location":"stats_binary_frames/#stats-sub-types","title":"Stats Sub-Types","text":"The CMD_GET_STATS command uses a 2-byte frame structure: - Byte 0: CMD_GET_STATS (56) - Byte 1: Stats sub-type: - STATS_TYPE_CORE (0) - Get core device statistics - STATS_TYPE_RADIO (1) - Get radio statistics - STATS_TYPE_PACKETS (2) - Get packet statistics
RESP_CODE_STATS 24 Statistics response (2-byte response: code + sub-type)"},{"location":"stats_binary_frames/#stats-response-sub-types","title":"Stats Response Sub-Types","text":"The RESP_CODE_STATS response uses a 2-byte header structure: - Byte 0: RESP_CODE_STATS (24) - Byte 1: Stats sub-type (matches command sub-type): - STATS_TYPE_CORE (0) - Core device statistics response - STATS_TYPE_RADIO (1) - Radio statistics response - STATS_TYPE_PACKETS (2) - Packet statistics response
Total Frame Size: 11 bytes
Offset Size Type Field Name Description Range/Notes 0 1 uint8_t response_code Always0x18 (24) - 1 1 uint8_t stats_type Always 0x00 (STATS_TYPE_CORE) - 2 2 uint16_t battery_mv Battery voltage in millivolts 0 - 65,535 4 4 uint32_t uptime_secs Device uptime in seconds 0 - 4,294,967,295 8 2 uint16_t errors Error flags bitmask - 10 1 uint8_t queue_len Outbound packet queue length 0 - 255"},{"location":"stats_binary_frames/#example-structure-cc","title":"Example Structure (C/C++)","text":"struct StatsCore {\n uint8_t response_code; // 0x18\n uint8_t stats_type; // 0x00 (STATS_TYPE_CORE)\n uint16_t battery_mv;\n uint32_t uptime_secs;\n uint16_t errors;\n uint8_t queue_len;\n} __attribute__((packed));\nTotal Frame Size: 14 bytes
Offset Size Type Field Name Description Range/Notes 0 1 uint8_t response_code Always0x18 (24) - 1 1 uint8_t stats_type Always 0x01 (STATS_TYPE_RADIO) - 2 2 int16_t noise_floor Radio noise floor in dBm -140 to +10 4 1 int8_t last_rssi Last received signal strength in dBm -128 to +127 5 1 int8_t last_snr SNR scaled by 4 Divide by 4.0 for dB 6 4 uint32_t tx_air_secs Cumulative transmit airtime in seconds 0 - 4,294,967,295 10 4 uint32_t rx_air_secs Cumulative receive airtime in seconds 0 - 4,294,967,295"},{"location":"stats_binary_frames/#example-structure-cc_1","title":"Example Structure (C/C++)","text":"struct StatsRadio {\n uint8_t response_code; // 0x18\n uint8_t stats_type; // 0x01 (STATS_TYPE_RADIO)\n int16_t noise_floor;\n int8_t last_rssi;\n int8_t last_snr; // Divide by 4.0 to get actual SNR in dB\n uint32_t tx_air_secs;\n uint32_t rx_air_secs;\n} __attribute__((packed));\nTotal Frame Size: 26 bytes (legacy) or 30 bytes (includes recv_errors)
0x18 (24) - 1 1 uint8_t stats_type Always 0x02 (STATS_TYPE_PACKETS) - 2 4 uint32_t recv Total packets received 0 - 4,294,967,295 6 4 uint32_t sent Total packets sent 0 - 4,294,967,295 10 4 uint32_t flood_tx Packets sent via flood routing 0 - 4,294,967,295 14 4 uint32_t direct_tx Packets sent via direct routing 0 - 4,294,967,295 18 4 uint32_t flood_rx Packets received via flood routing 0 - 4,294,967,295 22 4 uint32_t direct_rx Packets received via direct routing 0 - 4,294,967,295 26 4 uint32_t recv_errors Receive/CRC errors (RadioLib); present only in 30-byte frame 0 - 4,294,967,295"},{"location":"stats_binary_frames/#notes","title":"Notes","text":"recv = flood_rx + direct_rxsent = flood_tx + direct_txrecv_errors at offset 26.struct StatsPackets {\n uint8_t response_code; // 0x18\n uint8_t stats_type; // 0x02 (STATS_TYPE_PACKETS)\n uint32_t recv;\n uint32_t sent;\n uint32_t flood_tx;\n uint32_t direct_tx;\n uint32_t flood_rx;\n uint32_t direct_rx;\n uint32_t recv_errors; // present when frame size is 30\n} __attribute__((packed));\n# Send CMD_GET_STATS command\ndef send_get_stats_core(serial_interface):\n \"\"\"Send command to get core stats\"\"\"\n cmd = bytes([56, 0]) # CMD_GET_STATS (56) + STATS_TYPE_CORE (0)\n serial_interface.write(cmd)\n\ndef send_get_stats_radio(serial_interface):\n \"\"\"Send command to get radio stats\"\"\"\n cmd = bytes([56, 1]) # CMD_GET_STATS (56) + STATS_TYPE_RADIO (1)\n serial_interface.write(cmd)\n\ndef send_get_stats_packets(serial_interface):\n \"\"\"Send command to get packet stats\"\"\"\n cmd = bytes([56, 2]) # CMD_GET_STATS (56) + STATS_TYPE_PACKETS (2)\n serial_interface.write(cmd)\nimport struct\n\ndef parse_stats_core(frame):\n \"\"\"Parse RESP_CODE_STATS + STATS_TYPE_CORE frame (11 bytes)\"\"\"\n response_code, stats_type, battery_mv, uptime_secs, errors, queue_len = \\\n struct.unpack('<B B H I H B', frame)\n assert response_code == 24 and stats_type == 0, \"Invalid response type\"\n return {\n 'battery_mv': battery_mv,\n 'uptime_secs': uptime_secs,\n 'errors': errors,\n 'queue_len': queue_len\n }\n\ndef parse_stats_radio(frame):\n \"\"\"Parse RESP_CODE_STATS + STATS_TYPE_RADIO frame (14 bytes)\"\"\"\n response_code, stats_type, noise_floor, last_rssi, last_snr, tx_air_secs, rx_air_secs = \\\n struct.unpack('<B B h b b I I', frame)\n assert response_code == 24 and stats_type == 1, \"Invalid response type\"\n return {\n 'noise_floor': noise_floor,\n 'last_rssi': last_rssi,\n 'last_snr': last_snr / 4.0, # Unscale SNR\n 'tx_air_secs': tx_air_secs,\n 'rx_air_secs': rx_air_secs\n }\n\ndef parse_stats_packets(frame):\n \"\"\"Parse RESP_CODE_STATS + STATS_TYPE_PACKETS frame (26 or 30 bytes)\"\"\"\n assert len(frame) >= 26, \"STATS_TYPE_PACKETS frame too short\"\n response_code, stats_type, recv, sent, flood_tx, direct_tx, flood_rx, direct_rx = \\\n struct.unpack('<B B I I I I I I', frame[:26])\n assert response_code == 24 and stats_type == 2, \"Invalid response type\"\n result = {\n 'recv': recv,\n 'sent': sent,\n 'flood_tx': flood_tx,\n 'direct_tx': direct_tx,\n 'flood_rx': flood_rx,\n 'direct_rx': direct_rx\n }\n if len(frame) >= 30:\n (recv_errors,) = struct.unpack('<I', frame[26:30])\n result['recv_errors'] = recv_errors\n return result\n// Send CMD_GET_STATS command\nconst CMD_GET_STATS = 56;\nconst STATS_TYPE_CORE = 0;\nconst STATS_TYPE_RADIO = 1;\nconst STATS_TYPE_PACKETS = 2;\n\nfunction sendGetStatsCore(serialInterface: SerialPort): void {\n const cmd = new Uint8Array([CMD_GET_STATS, STATS_TYPE_CORE]);\n serialInterface.write(cmd);\n}\n\nfunction sendGetStatsRadio(serialInterface: SerialPort): void {\n const cmd = new Uint8Array([CMD_GET_STATS, STATS_TYPE_RADIO]);\n serialInterface.write(cmd);\n}\n\nfunction sendGetStatsPackets(serialInterface: SerialPort): void {\n const cmd = new Uint8Array([CMD_GET_STATS, STATS_TYPE_PACKETS]);\n serialInterface.write(cmd);\n}\ninterface StatsCore {\n battery_mv: number;\n uptime_secs: number;\n errors: number;\n queue_len: number;\n}\n\ninterface StatsRadio {\n noise_floor: number;\n last_rssi: number;\n last_snr: number;\n tx_air_secs: number;\n rx_air_secs: number;\n}\n\ninterface StatsPackets {\n recv: number;\n sent: number;\n flood_tx: number;\n direct_tx: number;\n flood_rx: number;\n direct_rx: number;\n recv_errors?: number; // present when frame is 30 bytes\n}\n\nfunction parseStatsCore(buffer: ArrayBuffer): StatsCore {\n const view = new DataView(buffer);\n const response_code = view.getUint8(0);\n const stats_type = view.getUint8(1);\n if (response_code !== 24 || stats_type !== 0) {\n throw new Error('Invalid response type');\n }\n return {\n battery_mv: view.getUint16(2, true),\n uptime_secs: view.getUint32(4, true),\n errors: view.getUint16(8, true),\n queue_len: view.getUint8(10)\n };\n}\n\nfunction parseStatsRadio(buffer: ArrayBuffer): StatsRadio {\n const view = new DataView(buffer);\n const response_code = view.getUint8(0);\n const stats_type = view.getUint8(1);\n if (response_code !== 24 || stats_type !== 1) {\n throw new Error('Invalid response type');\n }\n return {\n noise_floor: view.getInt16(2, true),\n last_rssi: view.getInt8(4),\n last_snr: view.getInt8(5) / 4.0, // Unscale SNR\n tx_air_secs: view.getUint32(6, true),\n rx_air_secs: view.getUint32(10, true)\n };\n}\n\nfunction parseStatsPackets(buffer: ArrayBuffer): StatsPackets {\n const view = new DataView(buffer);\n if (buffer.byteLength < 26) {\n throw new Error('STATS_TYPE_PACKETS frame too short');\n }\n const response_code = view.getUint8(0);\n const stats_type = view.getUint8(1);\n if (response_code !== 24 || stats_type !== 2) {\n throw new Error('Invalid response type');\n }\n const result: StatsPackets = {\n recv: view.getUint32(2, true),\n sent: view.getUint32(6, true),\n flood_tx: view.getUint32(10, true),\n direct_tx: view.getUint32(14, true),\n flood_rx: view.getUint32(18, true),\n direct_rx: view.getUint32(22, true)\n };\n if (buffer.byteLength >= 30) {\n result.recv_errors = view.getUint32(26, true);\n }\n return result;\n}\nBelow are the commands you can enter into the Terminal Chat clients:
set freq {frequency}\nSet the LoRa frequency. Example: set freq 915.8
set tx {tx-power-dbm}\nSets LoRa transmit power in dBm.
set name {name}\nSets your advertisement name.
set lat {latitude}\nSets your advertisement map latitude. (decimal degrees)
set lon {longitude}\nSets your advertisement map longitude. (decimal degrees)
set af {air-time-factor}\nSets the transmit air-time-factor.
time {epoch-secs}\nSet the device clock using UNIX epoch seconds. Example: time 1738242833
advert\nSends an advertisement packet
clock\nDisplays current time per device's clock.
ver\nShows the device version and firmware build date.
card\nDisplays your 'business card', for other to manually import
import {card}\nImports the given card to your contacts.
list {n}\nList all contacts by most recent. (optional {n}, is the last n by advertisement date)
to\nShows the name of current recipient contact. (for subsequent 'send' commands)
to {name-prefix}\nSets the recipient to the first matching contact (in 'list') by the name prefix. (ie. you don't have to type whole name)
send {text}\nSends the text message (as DM) to current recipient.
reset path\nResets the path to current recipient, for new path discovery.
public {text}\nSends the text message to the built-in 'public' group channel
"}]} \ No newline at end of file diff --git a/sitemap.xml b/sitemap.xml index d799b346..b9263e0b 100644 --- a/sitemap.xml +++ b/sitemap.xml @@ -2,50 +2,50 @@