fix: build errors because of changes in NRF52 base class
This commit is contained in:
@@ -141,11 +141,6 @@ static const uint8_t AREF = PIN_AREF;
|
||||
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
#define P_LORA_SCK PIN_SPI1_SCK
|
||||
#define P_LORA_MISO PIN_SPI1_MISO
|
||||
#define P_LORA_MOSI PIN_SPI1_MOSI
|
||||
#define P_LORA_CS 26
|
||||
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS (26)
|
||||
#define SX126X_DIO1 (10)
|
||||
@@ -157,6 +152,15 @@ static const uint8_t AREF = PIN_AREF;
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
#define P_LORA_SCLK PIN_SPI1_SCK
|
||||
#define P_LORA_MISO PIN_SPI1_MISO
|
||||
#define P_LORA_MOSI PIN_SPI1_MOSI
|
||||
#define P_LORA_NSS SX126X_CS
|
||||
#define P_LORA_DIO_1 SX126X_DIO1
|
||||
#define P_LORA_BUSY SX126X_BUSY
|
||||
#define P_LORA_RESET SX126X_RESET
|
||||
#define P_LORA_PA_EN 31
|
||||
|
||||
// enables 3.3V periphery like GPS or IO Module
|
||||
// Do not toggle this for GPS power savings
|
||||
#define PIN_3V3_EN (34)
|
||||
@@ -173,6 +177,10 @@ static const uint8_t AREF = PIN_AREF;
|
||||
#define PIN_GPS_RX PIN_SERIAL1_RX
|
||||
#define PIN_GPS_TX PIN_SERIAL1_TX
|
||||
|
||||
#define PIN_GPS_1PPS PIN_GPS_PPS
|
||||
#define GPS_BAUD_RATE 9600
|
||||
#define GPS_ADDRESS 0x42 //i2c address for GPS
|
||||
|
||||
// Battery
|
||||
// The battery sense is hooked to pin A0 (5)
|
||||
#define BATTERY_PIN PIN_A0
|
||||
|
||||
Reference in New Issue
Block a user