add heltec_mesh_node_t096 board.

variants/heltec_t096/platformio.ini

@@ -0,0 +1,148 @@
+[Heltec_t096]
+extends = nrf52_base
+board = heltec_t096
+board_build.ldscript = boards/nrf52840_s140_v6.ld
+build_flags = ${nrf52_base.build_flags}
+  ${sensor_base.build_flags}
+  -I lib/nrf52/s140_nrf52_6.1.1_API/include
+  -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
+  -I variants/heltec_t096
+  -I src/helpers/ui
+  -D HELTEC_T096
+  -D NRF52_POWER_MANAGEMENT
+  -D P_LORA_DIO_1=21
+  -D P_LORA_NSS=5
+  -D P_LORA_RESET=16
+  -D P_LORA_BUSY=19
+  -D P_LORA_SCLK=40
+  -D P_LORA_MISO=14
+  -D P_LORA_MOSI=11
+  -D P_LORA_TX_LED=28
+  -D P_LORA_PA_POWER=30  ;VFEM_Ctrl -LDO power enable
+  -D P_LORA_KCT8103L_PA_CSD=12
+  -D P_LORA_KCT8103L_PA_CTX=41
+  -D LORA_TX_POWER=9      ; 9dBm + ~13dB KCT8103L gain = ~22dBm output
+  -D MAX_LORA_TX_POWER=22 ; Max SX1262 output -> ~28dBm at antenna
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D PIN_VEXT_EN=26   ; Vext is connected to VDD which is also connected to TFT & GPS
+  -D PIN_VEXT_EN_ACTIVE=HIGH
+  -D PIN_GPS_RX=25
+  -D PIN_GPS_TX=23
+  -D PIN_GPS_EN=GPS_EN
+  -D PIN_GPS_EN_ACTIVE=LOW
+  -D PIN_GPS_RESET=GPS_RESET
+  -D PIN_GPS_RESET_ACTIVE=LOW
+  -D GPS_BAUD_RATE=115200
+  -D PIN_VBAT_READ=BATTERY_PIN
+  -D PIN_BAT_CTL=47
+  -D DISPLAY_CLASS=ST7735Display
+  -D DISPLAY_ROTATION=1
+build_src_filter = ${nrf52_base.build_src_filter}
+  +<helpers/*.cpp>
+  +<helpers/sensors>
+  +<../variants/heltec_t096>
+  +<helpers/ui/ST7735Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+lib_deps =
+  ${nrf52_base.lib_deps}
+  ${sensor_base.lib_deps}
+  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
+debug_tool = jlink
+upload_protocol = nrfutil
+
+[env:Heltec_t096_repeater]
+extends = Heltec_t096
+build_src_filter = ${Heltec_t096.build_src_filter}
+  +<../examples/simple_repeater>
+
+build_flags =
+  ${Heltec_t096.build_flags}
+  -D ADVERT_NAME='"Heltec_t096 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+
+[env:Heltec_t096_repeater_bridge_rs232]
+extends = Heltec_t096
+build_flags =
+  ${Heltec_t096.build_flags}
+  -D ADVERT_NAME='"RS232 Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_RS232_BRIDGE=Serial2
+  -D WITH_RS232_BRIDGE_RX=9
+  -D WITH_RS232_BRIDGE_TX=10
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Heltec_t096.build_src_filter}
+  +<helpers/bridges/RS232Bridge.cpp>
+  +<../examples/simple_repeater>
+
+[env:Heltec_t096_room_server]
+extends = Heltec_t096
+build_src_filter = ${Heltec_t096.build_src_filter}
+  +<../examples/simple_room_server> 
+build_flags =
+  ${Heltec_t096.build_flags}
+  -D ADVERT_NAME='"Heltec_t096 Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+
+[env:Heltec_t096_companion_radio_ble]
+extends = Heltec_t096
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${Heltec_t096.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D ENV_INCLUDE_GPS=1   ; enable the GPS page in UI
+;  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Heltec_t096.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Heltec_t096.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Heltec_t096_companion_radio_usb]
+extends = Heltec_t096
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${Heltec_t096.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+;  -D BLE_PIN_CODE=123456
+;  -D BLE_DEBUG_LOGGING=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Heltec_t096.build_src_filter}
+  +<helpers/nrf52/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Heltec_t096.lib_deps}
+  densaugeo/base64 @ ~1.4.0