Disable flood adverts

0 = forwarding flood adverts off
1 = forwarding flood adverts on (unrestricted)
0.308 (default) = prob. forwarding according to #1338

examples/companion_radio/MyMesh.cpp

@@ -811,7 +811,7 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0; // one half
+  _prefs.airtime_factor = 1.0;
   strcpy(_prefs.node_name, "NONAME");
   _prefs.freq = LORA_FREQ;
   _prefs.sf = LORA_SF;

examples/simple_repeater/MyMesh.cpp

@@ -403,6 +403,14 @@ bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
     MESH_DEBUG_PRINTLN("allowPacketForward: unknown transport code, or wildcard not allowed for FLOOD packet");
     return false;
   }
+  // Limit flood advert paket forwarding using a probabilistic reduction defined by P(h) = 0.308^(hops-1)
+  // https://github.com/meshcore-dev/MeshCore/issues/1223
+  double_t roll_dice = (double)rand() / RAND_MAX;
+  double_t forw_prob = pow(_prefs.flood_advert_base, packet->path_len - 1);
+  if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->isRouteFlood() && roll_dice > forw_prob)
+    return false;
+
+  // all other packets
   return true;
 }
 
@@ -506,7 +514,10 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* pkt) {
   if (pkt->getRouteType() == ROUTE_TYPE_TRANSPORT_FLOOD) {
     recv_pkt_region = region_map.findMatch(pkt, REGION_DENY_FLOOD);
   } else if (pkt->getRouteType() == ROUTE_TYPE_FLOOD) {
-    if (region_map.getWildcard().flags & REGION_DENY_FLOOD) {
+      if ((pkt->getPayloadType() == PAYLOAD_TYPE_GRP_TXT ||
+           pkt->getPayloadType() == PAYLOAD_TYPE_GRP_DATA ||
+           pkt->getPayloadType() == PAYLOAD_TYPE_ADVERT) &&
+          region_map.getWildcard().flags & REGION_DENY_FLOOD) {
       recv_pkt_region = NULL;
     } else {
       recv_pkt_region =  &region_map.getWildcard();
@@ -824,7 +835,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0;   // one half
+  _prefs.airtime_factor = 1.0;
   _prefs.rx_delay_base = 0.0f;   // turn off by default, was 10.0;
   _prefs.tx_delay_factor = 0.5f; // was 0.25f
   _prefs.direct_tx_delay_factor = 0.3f; // was 0.2
@@ -838,7 +849,8 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.cr = LORA_CR;
   _prefs.tx_power_dbm = LORA_TX_POWER;
   _prefs.advert_interval = 1;        // default to 2 minutes for NEW installs
-  _prefs.flood_advert_interval = 12; // 12 hours
+  _prefs.flood_advert_interval = 0; // 12 hours
+  _prefs.flood_advert_base = 0.308f;
   _prefs.flood_max = 64;
   _prefs.interference_threshold = 0; // disabled
 

examples/simple_room_server/MyMesh.cpp

@@ -277,6 +277,15 @@ uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
 bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
   if (_prefs.disable_fwd) return false;
   if (packet->isRouteFlood() && packet->getPathHashCount() >= _prefs.flood_max) return false;
+
+  // Limit flood advert paket forwarding using a probabilistic reduction defined by P(h) = 0.308^(hops-1)
+  // https://github.com/meshcore-dev/MeshCore/issues/1223
+  double_t roll_dice = (double)rand() / RAND_MAX;
+  double_t forw_prob = pow(_prefs.flood_advert_base, packet->path_len - 1);
+  if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->isRouteFlood() && roll_dice > forw_prob)
+    return false;
+
+  // all other packets
   return true;
 }
 
@@ -599,7 +608,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0;   // one half
+  _prefs.airtime_factor = 1.0;
   _prefs.rx_delay_base = 0.0f;   // off by default, was 10.0
   _prefs.tx_delay_factor = 0.5f; // was 0.25f;
   _prefs.direct_tx_delay_factor = 0.2f; // was zero
@@ -614,7 +623,8 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.tx_power_dbm = LORA_TX_POWER;
   _prefs.disable_fwd = 1;
   _prefs.advert_interval = 1;        // default to 2 minutes for NEW installs
-  _prefs.flood_advert_interval = 12; // 12 hours
+  _prefs.flood_advert_interval = 0; // 12 hours
+  _prefs.flood_advert_base = 0.308f;
   _prefs.flood_max = 64;
   _prefs.interference_threshold = 0; // disabled
 #ifdef ROOM_PASSWORD

examples/simple_secure_chat/main.cpp

@@ -281,7 +281,7 @@ public:
   {
     // defaults
     memset(&_prefs, 0, sizeof(_prefs));
-    _prefs.airtime_factor = 2.0;    // one third
+    _prefs.airtime_factor = 1.0;
     strcpy(_prefs.node_name, "NONAME");
     _prefs.freq = LORA_FREQ;
     _prefs.tx_power_dbm = LORA_TX_POWER;

examples/simple_sensor/SensorMesh.cpp

@@ -706,7 +706,7 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
-  _prefs.airtime_factor = 1.0;    // one half
+  _prefs.airtime_factor = 1.0;
   _prefs.rx_delay_base =   0.0f;  // turn off by default, was 10.0;
   _prefs.tx_delay_factor = 0.5f;   // was 0.25f
   _prefs.direct_tx_delay_factor = 0.2f; // was zero

src/Dispatcher.cpp

@@ -9,6 +9,8 @@
 namespace mesh {
 
 #define MAX_RX_DELAY_MILLIS        32000  // 32 seconds
+#define MIN_TX_BUDGET_RESERVE_MS   100    // min budget (ms) required before allowing next TX
+#define MIN_TX_BUDGET_AIRTIME_DIV  2      // require at least 1/N of estimated airtime as budget before TX
 
 #ifndef NOISE_FLOOR_CALIB_INTERVAL
   #define NOISE_FLOOR_CALIB_INTERVAL   2000     // 2 seconds
@@ -20,12 +22,34 @@ void Dispatcher::begin() {
   _err_flags = 0;
   radio_nonrx_start = _ms->getMillis();
 
+  duty_cycle_window_ms = getDutyCycleWindowMs();
+  float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
+  tx_budget_ms = (unsigned long)(duty_cycle_window_ms * duty_cycle);
+  last_budget_update = _ms->getMillis();
+
   _radio->begin();
   prev_isrecv_mode = _radio->isInRecvMode();
 }
 
 float Dispatcher::getAirtimeBudgetFactor() const {
-  return 2.0;   // default, 33.3%  (1/3rd)
+  return 1.0;
+}
+
+void Dispatcher::updateTxBudget() {
+  unsigned long now = _ms->getMillis();
+  unsigned long elapsed = now - last_budget_update;
+
+  float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
+  unsigned long max_budget = (unsigned long)(getDutyCycleWindowMs() * duty_cycle);
+  unsigned long refill = (unsigned long)(elapsed * duty_cycle);
+  
+  if (refill > 0) {
+    tx_budget_ms += refill;
+    if (tx_budget_ms > max_budget) {
+      tx_budget_ms = max_budget;
+    }
+    last_budget_update = now;
+  }
 }
 
 int Dispatcher::calcRxDelay(float score, uint32_t air_time) const {
@@ -61,11 +85,24 @@ void Dispatcher::loop() {
   if (outbound) {  // waiting for outbound send to be completed
     if (_radio->isSendComplete()) {
       long t = _ms->getMillis() - outbound_start;
-      total_air_time += t;  // keep track of how much air time we are using
+      total_air_time += t;
       //Serial.print("  airtime="); Serial.println(t);
 
-      // will need radio silence up to next_tx_time
+      updateTxBudget();
-      next_tx_time = futureMillis(t * getAirtimeBudgetFactor());
+
+      if (t > tx_budget_ms) {
+        tx_budget_ms = 0;
+      } else {
+        tx_budget_ms -= t;
+      }
+
+      if (tx_budget_ms < MIN_TX_BUDGET_RESERVE_MS) {
+        float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
+        unsigned long needed = MIN_TX_BUDGET_RESERVE_MS - tx_budget_ms;
+        next_tx_time = futureMillis((unsigned long)(needed / duty_cycle));
+      } else {
+        next_tx_time = _ms->getMillis();
+      }
 
       _radio->onSendFinished();
       logTx(outbound, 2 + outbound->getPathByteLen() + outbound->payload_len);
@@ -235,9 +272,20 @@ void Dispatcher::processRecvPacket(Packet* pkt) {
 }
 
 void Dispatcher::checkSend() {
-  if (_mgr->getOutboundCount(_ms->getMillis()) == 0) return;  // nothing waiting to send
+  if (_mgr->getOutboundCount(_ms->getMillis()) == 0) return;
-  if (!millisHasNowPassed(next_tx_time)) return;   // still in 'radio silence' phase (from airtime budget setting)
+  
-  if (_radio->isReceiving()) {   // LBT - check if radio is currently mid-receive, or if channel activity
+  updateTxBudget();
+  
+  uint32_t est_airtime = _radio->getEstAirtimeFor(MAX_TRANS_UNIT);
+  if (tx_budget_ms < est_airtime / MIN_TX_BUDGET_AIRTIME_DIV) {
+    float duty_cycle = 1.0f / (1.0f + getAirtimeBudgetFactor());
+    unsigned long needed = est_airtime / MIN_TX_BUDGET_AIRTIME_DIV - tx_budget_ms;
+    next_tx_time = futureMillis((unsigned long)(needed / duty_cycle));
+    return;
+  }
+  
+  if (!millisHasNowPassed(next_tx_time)) return;
+  if (_radio->isReceiving()) {
     if (cad_busy_start == 0) {
       cad_busy_start = _ms->getMillis();   // record when CAD busy state started
     }

src/Dispatcher.h

@@ -122,8 +122,12 @@ class Dispatcher {
   bool  prev_isrecv_mode;
   uint32_t n_sent_flood, n_sent_direct;
   uint32_t n_recv_flood, n_recv_direct;
+  unsigned long tx_budget_ms;
+  unsigned long last_budget_update;
+  unsigned long duty_cycle_window_ms;
 
   void processRecvPacket(Packet* pkt);
+  void updateTxBudget();
 
 protected:
   PacketManager* _mgr;
@@ -142,6 +146,9 @@ protected:
     _err_flags = 0;
     radio_nonrx_start = 0;
     prev_isrecv_mode = true;
+    tx_budget_ms = 0;
+    last_budget_update = 0;
+    duty_cycle_window_ms = 3600000;
   }
 
   virtual DispatcherAction onRecvPacket(Packet* pkt) = 0;
@@ -159,6 +166,7 @@ protected:
   virtual uint32_t getCADFailMaxDuration() const;
   virtual int getInterferenceThreshold() const { return 0; }    // disabled by default
   virtual int getAGCResetInterval() const { return 0; }    // disabled by default
+  virtual unsigned long getDutyCycleWindowMs() const { return 3600000; }
 
 public:
   void begin();
@@ -168,8 +176,9 @@ public:
   void releasePacket(Packet* packet);
   void sendPacket(Packet* packet, uint8_t priority, uint32_t delay_millis=0);
 
-  unsigned long getTotalAirTime() const { return total_air_time; }  // in milliseconds
+  unsigned long getTotalAirTime() const { return total_air_time; }
   unsigned long getReceiveAirTime() const {return rx_air_time; }
+  unsigned long getRemainingTxBudget() const { return tx_budget_ms; }
   uint32_t getNumSentFlood() const { return n_sent_flood; }
   uint32_t getNumSentDirect() const { return n_sent_direct; }
   uint32_t getNumRecvFlood() const { return n_recv_flood; }

src/helpers/CommonCLI.cpp

@@ -82,7 +82,9 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     file.read((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
     file.read((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier)); // 166
     file.read((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));  // 170
-    // 290
+    file.read((uint8_t *)&_prefs->flood_advert_base, sizeof(_prefs->flood_advert_base));                 // 290
+
+    // 294
 
     // sanitise bad pref values
     _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
@@ -110,6 +112,8 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     _prefs->gps_enabled = constrain(_prefs->gps_enabled, 0, 1);
     _prefs->advert_loc_policy = constrain(_prefs->advert_loc_policy, 0, 2);
 
+    _prefs->flood_advert_base = constrain(_prefs->flood_advert_base, 0, 1);
+
     file.close();
   }
 }
@@ -168,7 +172,9 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
     file.write((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier));                 // 166
     file.write((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));  // 170
-    // 290
+    file.write((uint8_t *)&_prefs->flood_advert_base, sizeof(_prefs->flood_advert_base));                 // 290
+
+    // 294
 
     file.close();
   }
@@ -385,6 +391,8 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         } else {
           sprintf(reply, "> %.3f", adc_mult);
         }
+      } else if (memcmp(config, "flood.advert.base", 17) == 0) {
+          sprintf(reply, "> %s", StrHelper::ftoa(_prefs->flood_advert_base));
       // Power management commands
       } else if (memcmp(config, "pwrmgt.support", 14) == 0) {
 #ifdef NRF52_POWER_MANAGEMENT
@@ -642,6 +650,15 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
           _prefs->adc_multiplier = 0.0f;
           strcpy(reply, "Error: unsupported by this board");
         };
+      } else if (memcmp(config, "flood.advert.base ", 18) == 0) {
+        float f = atof(&config[18]);
+        if((f > 0) || (f<1)) {
+          _prefs->flood_advert_base = f;
+          savePrefs();
+          strcpy(reply, "OK");
+        } else {
+          strcpy(reply, "Error: base must be between 0 and 1");
+      }        
       } else {
         sprintf(reply, "unknown config: %s", config);
       }

src/helpers/CommonCLI.h

@@ -36,6 +36,7 @@ struct NodePrefs { // persisted to file
   uint8_t flood_max;
   uint8_t interference_threshold;
   uint8_t agc_reset_interval; // secs / 4
+  float flood_advert_base;
   // Bridge settings
   uint8_t bridge_enabled; // boolean
   uint16_t bridge_delay;  // milliseconds (default 500 ms)

variants/rak4631/variant.h

@@ -106,7 +106,7 @@ extern "C"
 
 // Power management boot protection threshold (millivolts)
 // Set to 0 to disable boot protection
-#define PWRMGT_VOLTAGE_BOOTLOCK 3300   // Won't boot below this voltage (mV)
+#define PWRMGT_VOLTAGE_BOOTLOCK 0   // Won't boot below this voltage (mV)
 // LPCOMP wake configuration (voltage recovery from SYSTEMOFF)
 // AIN3 = P0.05 = PIN_A0 / PIN_VBAT_READ
 #define PWRMGT_LPCOMP_AIN 3