Merge branch 'dev' of github.com:meshcore-dev/MeshCore into meshcore-evo

fix: bump max contacts for heltec v3 companion usb

build.sh

@@ -29,6 +29,20 @@ $ sh build.sh build-repeater-firmwares
 
 Build all chat room server firmwares
 $ sh build.sh build-room-server-firmwares
+
+Environment Variables:
+  DISABLE_DEBUG=1: Disables all debug logging flags (MESH_DEBUG, MESH_PACKET_LOGGING, etc.)
+                   If not set, debug flags from variant platformio.ini files are used.
+
+Examples:
+Build without debug logging:
+$ export FIRMWARE_VERSION=v1.0.0
+$ export DISABLE_DEBUG=1
+$ sh build.sh build-firmware RAK_4631_repeater
+
+Build with debug logging (default, uses flags from variant files):
+$ export FIRMWARE_VERSION=v1.0.0
+$ sh build.sh build-firmware RAK_4631_repeater
 EOF
 }
 
@@ -68,6 +82,13 @@ get_pio_envs_ending_with_string() {
   done
 }
 
+# disable all debug logging flags if DISABLE_DEBUG=1 is set
+disable_debug_flags() {
+  if [ "$DISABLE_DEBUG" == "1" ]; then
+    export PLATFORMIO_BUILD_FLAGS="${PLATFORMIO_BUILD_FLAGS} -UMESH_DEBUG -UBLE_DEBUG_LOGGING -UWIFI_DEBUG_LOGGING -UBRIDGE_DEBUG -UGPS_NMEA_DEBUG -UCORE_DEBUG_LEVEL -UESPNOW_DEBUG_LOGGING -UDEBUG_RP2040_WIRE -UDEBUG_RP2040_SPI -UDEBUG_RP2040_CORE -UDEBUG_RP2040_PORT -URADIOLIB_DEBUG_SPI -UCFG_DEBUG -URADIOLIB_DEBUG_BASIC -URADIOLIB_DEBUG_PROTOCOL"
+  fi
+}
+
 # build firmware for the provided pio env in $1
 build_firmware() {
 
@@ -94,6 +115,9 @@ build_firmware() {
   # add firmware version info to end of existing platformio build flags in environment vars
   export PLATFORMIO_BUILD_FLAGS="${PLATFORMIO_BUILD_FLAGS} -DFIRMWARE_BUILD_DATE='\"${FIRMWARE_BUILD_DATE}\"' -DFIRMWARE_VERSION='\"${FIRMWARE_VERSION_STRING}\"'"
 
+  # disable debug flags if requested
+  disable_debug_flags
+
   # build firmware target
   pio run -e $1
 

docs/payloads.md

@@ -103,7 +103,9 @@ Request type
 | `0x02` | keepalive            | (deprecated) |
 | `0x03` | get telemetry data   | TODO |
 | `0x04` | get min,max,avg data | sensor nodes - get min, max, average for given time span |
-| `0x05` | get access list      | get node's approved access list       |
+| `0x05` | get access list      | get node's approved access list            |
+| `0x06` | get neighbors        | get repeater node's neighbors              |
+| `0x07` | get owner info       | get repeater firmware-ver/name/owner info  |
 
 ### Get stats
 
@@ -132,6 +134,27 @@ Gets information about the node, possibly including the following:
 
 Request data about sensors on the node, including battery level.
 
+### Get Telemetry
+
+TODO
+
+### Get Min/Max/Ave  (Sensor nodes)
+
+TODO
+
+### Get Access List
+
+TODO
+
+### Get Neighors
+
+TODO
+
+### Get Owner Info
+
+TODO
+
+
 ## Response
 
 | Field   | Size (bytes)    | Description |
@@ -179,6 +202,34 @@ txt_type
 | timestamp      | 4               | sender time (unix timestamp)                                                  |
 | password       | rest of message | password for repeater/sensor                                                  |
 
+## Repeater - Regions request
+
+| Field          | Size (bytes)    | Description                                                                   |
+|----------------|-----------------|-------------------------------------------------------------------------------|
+| timestamp      | 4               | sender time (unix timestamp)                                                  |
+| req type       | 1               | 0x01 (request sub type)                                                       |
+| reply path len | 1               | path len for reply                                                       |
+| reply path     | (variable)      | reply path                                                       |
+
+## Repeater - Owner info request
+
+| Field          | Size (bytes)    | Description                                                                   |
+|----------------|-----------------|-------------------------------------------------------------------------------|
+| timestamp      | 4               | sender time (unix timestamp)                                                  |
+| req type       | 1               | 0x02 (request sub type)                                                       |
+| reply path len | 1               | path len for reply                                                       |
+| reply path     | (variable)      | reply path                                                       |
+
+## Repeater - Clock and status request
+
+| Field          | Size (bytes)    | Description                                                                   |
+|----------------|-----------------|-------------------------------------------------------------------------------|
+| timestamp      | 4               | sender time (unix timestamp)                                                  |
+| req type       | 1               | 0x03 (request sub type)                                                       |
+| reply path len | 1               | path len for reply                                                       |
+| reply path     | (variable)      | reply path                                                       |
+
+
 # Group text message / datagram
 
 | Field        | Size (bytes)    | Description                                |

examples/companion_radio/DataStore.cpp

@@ -227,6 +227,7 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
     file.read((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
     file.read((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
     file.read((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
+    file.read((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
 
     file.close();
   }
@@ -261,6 +262,7 @@ void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_
     file.write((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
     file.write((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
     file.write((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
+    file.write((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
 
     file.close();
   }

examples/companion_radio/MyMesh.cpp

@@ -53,6 +53,9 @@
 #define CMD_SET_FLOOD_SCOPE           54   // v8+
 #define CMD_SEND_CONTROL_DATA         55   // v8+
 #define CMD_GET_STATS                 56   // v8+, second byte is stats type
+#define CMD_SEND_ANON_REQ             57
+#define CMD_SET_AUTOADD_CONFIG        58
+#define CMD_GET_AUTOADD_CONFIG        59
 
 // Stats sub-types for CMD_GET_STATS
 #define STATS_TYPE_CORE               0
@@ -84,6 +87,7 @@
 #define RESP_CODE_ADVERT_PATH         22
 #define RESP_CODE_TUNING_PARAMS       23
 #define RESP_CODE_STATS               24   // v8+, second byte is stats type
+#define RESP_CODE_AUTOADD_CONFIG      25
 
 #define SEND_TIMEOUT_BASE_MILLIS        500
 #define FLOOD_SEND_TIMEOUT_FACTOR       16.0f
@@ -109,6 +113,8 @@
 #define PUSH_CODE_BINARY_RESPONSE       0x8C
 #define PUSH_CODE_PATH_DISCOVERY_RESPONSE 0x8D
 #define PUSH_CODE_CONTROL_DATA          0x8E   // v8+
+#define PUSH_CODE_CONTACT_DELETED       0x8F // used to notify client app of deleted contact when overwriting oldest
+#define PUSH_CODE_CONTACTS_FULL         0x90 // used to notify client app that contacts storage is full
 
 #define ERR_CODE_UNSUPPORTED_CMD        1
 #define ERR_CODE_NOT_FOUND              2
@@ -119,6 +125,15 @@
 
 #define MAX_SIGN_DATA_LEN               (8 * 1024) // 8K
 
+// Auto-add config bitmask
+// Bit 0: If set, overwrite oldest non-favourite contact when contacts file is full
+// Bits 1-4: these indicate which contact types to auto-add when manual_contact_mode = 0x01
+#define AUTO_ADD_OVERWRITE_OLDEST (1 << 0)  // 0x01 - overwrite oldest non-favourite when full
+#define AUTO_ADD_CHAT             (1 << 1)  // 0x02 - auto-add Chat (Companion) (ADV_TYPE_CHAT)
+#define AUTO_ADD_REPEATER         (1 << 2)  // 0x04 - auto-add Repeater (ADV_TYPE_REPEATER)
+#define AUTO_ADD_ROOM_SERVER      (1 << 3)  // 0x08 - auto-add Room Server (ADV_TYPE_ROOM)
+#define AUTO_ADD_SENSOR           (1 << 4)  // 0x10 - auto-add Sensor (ADV_TYPE_SENSOR)
+
 void MyMesh::writeOKFrame() {
   uint8_t buf[1];
   buf[0] = RESP_CODE_OK;
@@ -261,9 +276,54 @@ bool MyMesh::isAutoAddEnabled() const {
   return (_prefs.manual_add_contacts & 1) == 0;
 }
 
+bool MyMesh::shouldAutoAddContactType(uint8_t contact_type) const {
+  if ((_prefs.manual_add_contacts & 1) == 0) {
+    return true;
+  }
+  
+  uint8_t type_bit = 0;
+  switch (contact_type) {
+    case ADV_TYPE_CHAT:
+      type_bit = AUTO_ADD_CHAT;
+      break;
+    case ADV_TYPE_REPEATER:
+      type_bit = AUTO_ADD_REPEATER;
+      break;
+    case ADV_TYPE_ROOM:
+      type_bit = AUTO_ADD_ROOM_SERVER;
+      break;
+    case ADV_TYPE_SENSOR:
+      type_bit = AUTO_ADD_SENSOR;
+      break;
+    default:
+      return false;  // Unknown type, don't auto-add
+  }
+  
+  return (_prefs.autoadd_config & type_bit) != 0;
+}
+
+bool MyMesh::shouldOverwriteWhenFull() const {
+  return (_prefs.autoadd_config & AUTO_ADD_OVERWRITE_OLDEST) != 0;
+}
+
+void MyMesh::onContactOverwrite(const uint8_t* pub_key) {
+  if (_serial->isConnected()) {
+    out_frame[0] = PUSH_CODE_CONTACT_DELETED;
+    memcpy(&out_frame[1], pub_key, PUB_KEY_SIZE);
+    _serial->writeFrame(out_frame, 1 + PUB_KEY_SIZE);
+  }
+}
+
+void MyMesh::onContactsFull() {
+  if (_serial->isConnected()) {
+    out_frame[0] = PUSH_CODE_CONTACTS_FULL;
+    _serial->writeFrame(out_frame, 1);
+  }
+}
+
 void MyMesh::onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path_len, const uint8_t* path) {
   if (_serial->isConnected()) {
-    if (!isAutoAddEnabled() && is_new) {
+    if (!shouldAutoAddContactType(contact.type) && is_new) {
       writeContactRespFrame(PUSH_CODE_NEW_ADVERT, contact);
     } else {
       out_frame[0] = PUSH_CODE_ADVERT;
@@ -802,6 +862,7 @@ void MyMesh::begin(bool has_display) {
 
   resetContacts();
   _store->loadContacts(this);
+  bootstrapRTCfromContacts();
   addChannel("Public", PUBLIC_GROUP_PSK); // pre-configure Andy's public channel
   _store->loadChannels(this);
 
@@ -1286,6 +1347,27 @@ void MyMesh::handleCmdFrame(size_t len) {
     } else {
       writeErrFrame(ERR_CODE_NOT_FOUND); // contact not found
     }
+  } else if (cmd_frame[0] == CMD_SEND_ANON_REQ && len > 1 + PUB_KEY_SIZE) {
+    uint8_t *pub_key = &cmd_frame[1];
+    ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
+    uint8_t *data = &cmd_frame[1 + PUB_KEY_SIZE];
+    if (recipient) {
+      uint32_t tag, est_timeout;
+      int result = sendAnonReq(*recipient, data, len - (1 + PUB_KEY_SIZE), tag, est_timeout);
+      if (result == MSG_SEND_FAILED) {
+        writeErrFrame(ERR_CODE_TABLE_FULL);
+      } else {
+        clearPendingReqs();
+        pending_req = tag; // match this to onContactResponse()
+        out_frame[0] = RESP_CODE_SENT;
+        out_frame[1] = (result == MSG_SEND_SENT_FLOOD) ? 1 : 0;
+        memcpy(&out_frame[2], &tag, 4);
+        memcpy(&out_frame[6], &est_timeout, 4);
+        _serial->writeFrame(out_frame, 10);
+      }
+    } else {
+      writeErrFrame(ERR_CODE_NOT_FOUND); // contact not found
+    }
   } else if (cmd_frame[0] == CMD_SEND_STATUS_REQ && len >= 1 + PUB_KEY_SIZE) {
     uint8_t *pub_key = &cmd_frame[1];
     ContactInfo *recipient = lookupContactByPubKey(pub_key, PUB_KEY_SIZE);
@@ -1641,6 +1723,15 @@ void MyMesh::handleCmdFrame(size_t len) {
     } else {
       writeErrFrame(ERR_CODE_TABLE_FULL);
     }
+  } else if (cmd_frame[0] == CMD_SET_AUTOADD_CONFIG) {
+    _prefs.autoadd_config = cmd_frame[1];
+    savePrefs();
+    writeOKFrame();  
+  } else if (cmd_frame[0] == CMD_GET_AUTOADD_CONFIG) {
+    int i = 0;
+    out_frame[i++] = RESP_CODE_AUTOADD_CONFIG;
+    out_frame[i++] = _prefs.autoadd_config;
+    _serial->writeFrame(out_frame, i);
   } else {
     writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
     MESH_DEBUG_PRINTLN("ERROR: unknown command: %02X", cmd_frame[0]);

examples/companion_radio/MyMesh.h

@@ -114,6 +114,10 @@ protected:
 
   void logRxRaw(float snr, float rssi, const uint8_t raw[], int len) override;
   bool isAutoAddEnabled() const override;
+  bool shouldAutoAddContactType(uint8_t type) const override;
+  bool shouldOverwriteWhenFull() const override;
+  void onContactsFull() override;
+  void onContactOverwrite(const uint8_t* pub_key) override;
   bool onContactPathRecv(ContactInfo& from, uint8_t* in_path, uint8_t in_path_len, uint8_t* out_path, uint8_t out_path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) override;
   void onDiscoveredContact(ContactInfo &contact, bool is_new, uint8_t path_len, const uint8_t* path) override;
   void onContactPathUpdated(const ContactInfo &contact) override;

examples/companion_radio/NodePrefs.h

@@ -27,4 +27,5 @@ struct NodePrefs {  // persisted to file
   uint8_t  buzzer_quiet;
   uint8_t  gps_enabled;      // GPS enabled flag (0=disabled, 1=enabled)
   uint32_t gps_interval;     // GPS read interval in seconds
+  uint8_t autoadd_config;    // bitmask for auto-add contacts config
 };

examples/simple_repeater/MyMesh.cpp

@@ -41,16 +41,21 @@
   #define TXT_ACK_DELAY 200
 #endif
 
-#define FIRMWARE_VER_LEVEL       1
+#define FIRMWARE_VER_LEVEL       2
 
 #define REQ_TYPE_GET_STATUS         0x01 // same as _GET_STATS
 #define REQ_TYPE_KEEP_ALIVE         0x02
 #define REQ_TYPE_GET_TELEMETRY_DATA 0x03
 #define REQ_TYPE_GET_ACCESS_LIST    0x05
 #define REQ_TYPE_GET_NEIGHBOURS     0x06
+#define REQ_TYPE_GET_OWNER_INFO     0x07     // FIRMWARE_VER_LEVEL >= 2
 
 #define RESP_SERVER_LOGIN_OK        0 // response to ANON_REQ
 
+#define ANON_REQ_TYPE_REGIONS      0x01
+#define ANON_REQ_TYPE_OWNER        0x02
+#define ANON_REQ_TYPE_BASIC        0x03   // just remote clock
+
 #define CLI_REPLY_DELAY_MILLIS      600
 
 #define LAZY_CONTACTS_WRITE_DELAY    5000
@@ -139,6 +144,64 @@ uint8_t MyMesh::handleLoginReq(const mesh::Identity& sender, const uint8_t* secr
   return 13;  // reply length
 }
 
+uint8_t MyMesh::handleAnonRegionsReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data) {
+  if (anon_limiter.allow(rtc_clock.getCurrentTime())) {
+    // request data has: {reply-path-len}{reply-path}
+    reply_path_len = *data++ & 0x3F;
+    memcpy(reply_path, data, reply_path_len);
+    // data += reply_path_len;
+
+    memcpy(reply_data, &sender_timestamp, 4);   // prefix with sender_timestamp, like a tag
+    uint32_t now = getRTCClock()->getCurrentTime();
+    memcpy(&reply_data[4], &now, 4);     // include our clock (for easy clock sync, and packet hash uniqueness)
+
+    return 8 + region_map.exportNamesTo((char *) &reply_data[8], sizeof(reply_data) - 12, REGION_DENY_FLOOD);   // reply length
+  }
+  return 0;
+}
+
+uint8_t MyMesh::handleAnonOwnerReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data) {
+  if (anon_limiter.allow(rtc_clock.getCurrentTime())) {
+    // request data has: {reply-path-len}{reply-path}
+    reply_path_len = *data++ & 0x3F;
+    memcpy(reply_path, data, reply_path_len);
+    // data += reply_path_len;
+
+    memcpy(reply_data, &sender_timestamp, 4);   // prefix with sender_timestamp, like a tag
+    uint32_t now = getRTCClock()->getCurrentTime();
+    memcpy(&reply_data[4], &now, 4);     // include our clock (for easy clock sync, and packet hash uniqueness)
+    sprintf((char *) &reply_data[8], "%s\n%s", _prefs.node_name, _prefs.owner_info);
+
+    return 8 + strlen((char *) &reply_data[8]);   // reply length
+  }
+  return 0;
+}
+
+uint8_t MyMesh::handleAnonClockReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data) {
+  if (anon_limiter.allow(rtc_clock.getCurrentTime())) {
+    // request data has: {reply-path-len}{reply-path}
+    reply_path_len = *data++ & 0x3F;
+    memcpy(reply_path, data, reply_path_len);
+    // data += reply_path_len;
+
+    memcpy(reply_data, &sender_timestamp, 4);   // prefix with sender_timestamp, like a tag
+    uint32_t now = getRTCClock()->getCurrentTime();
+    memcpy(&reply_data[4], &now, 4);     // include our clock (for easy clock sync, and packet hash uniqueness)
+    reply_data[8] = 0;  // features
+#ifdef WITH_RS232_BRIDGE
+    reply_data[8] |= 0x01;  // is bridge, type UART
+#elif WITH_ESPNOW_BRIDGE
+    reply_data[8] |= 0x03;  // is bridge, type ESP-NOW
+#endif
+    if (_prefs.disable_fwd) {   // is this repeater currently disabled
+      reply_data[8] |= 0x80;  // is disabled
+    }
+    // TODO:  add some kind of moving-window utilisation metric, so can query 'how busy' is this repeater
+    return 9;   // reply length
+  }
+  return 0;
+}
+
 int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t *payload, size_t payload_len) {
   // uint32_t now = getRTCClock()->getCurrentTimeUnique();
   // memcpy(reply_data, &now, 4);   // response packets always prefixed with timestamp
@@ -296,6 +359,9 @@ int MyMesh::handleRequest(ClientInfo *sender, uint32_t sender_timestamp, uint8_t
 
       return reply_offset;
     }
+  } else if (payload[0] == REQ_TYPE_GET_OWNER_INFO) {
+    sprintf((char *) &reply_data[4], "%s\n%s\n%s", FIRMWARE_VERSION, _prefs.node_name, _prefs.owner_info);
+    return 4 + strlen((char *) &reply_data[4]);
   }
   return 0; // unknown command
 }
@@ -448,12 +514,18 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m
 
     data[len] = 0;  // ensure null terminator
     uint8_t reply_len;
+
+    reply_path_len = -1;
     if (data[4] == 0 || data[4] >= ' ') {   // is password, ie. a login request
       reply_len = handleLoginReq(sender, secret, timestamp, &data[4], packet->isRouteFlood());
-    //} else if (data[4] == ANON_REQ_TYPE_*) {   // future type codes
+    } else if (data[4] == ANON_REQ_TYPE_REGIONS && packet->isRouteDirect()) {
-      // TODO
+      reply_len = handleAnonRegionsReq(sender, timestamp, &data[5]);
+    } else if (data[4] == ANON_REQ_TYPE_OWNER && packet->isRouteDirect()) {
+      reply_len = handleAnonOwnerReq(sender, timestamp, &data[5]);
+    } else if (data[4] == ANON_REQ_TYPE_BASIC && packet->isRouteDirect()) {
+      reply_len = handleAnonClockReq(sender, timestamp, &data[5]);
     } else {
-      reply_len = 0;  // unknown request type
+      reply_len = 0;  // unknown/invalid request type
     }
 
     if (reply_len == 0) return;   // invalid request
@@ -463,9 +535,12 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m
       mesh::Packet* path = createPathReturn(sender, secret, packet->path, packet->path_len,
                                             PAYLOAD_TYPE_RESPONSE, reply_data, reply_len);
       if (path) sendFlood(path, SERVER_RESPONSE_DELAY);
-    } else {
+    } else if (reply_path_len < 0) {
       mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len);
       if (reply) sendFlood(reply, SERVER_RESPONSE_DELAY);
+    } else {
+      mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len);
+      if (reply) sendDirect(reply, reply_path, reply_path_len, SERVER_RESPONSE_DELAY);
     }
   }
 }
@@ -637,7 +712,9 @@ bool MyMesh::onPeerPathRecv(mesh::Packet *packet, int sender_idx, const uint8_t
 
 void MyMesh::onControlDataRecv(mesh::Packet* packet) {
   uint8_t type = packet->payload[0] & 0xF0;    // just test upper 4 bits
-  if (type == CTL_TYPE_NODE_DISCOVER_REQ && packet->payload_len >= 6 && discover_limiter.allow(rtc_clock.getCurrentTime())) {
+  if (type == CTL_TYPE_NODE_DISCOVER_REQ && packet->payload_len >= 6
+      && !_prefs.disable_fwd && discover_limiter.allow(rtc_clock.getCurrentTime())
+  ) {
     int i = 1;
     uint8_t  filter = packet->payload[i++];
     uint32_t tag;
@@ -668,7 +745,8 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
                mesh::RTCClock &rtc, mesh::MeshTables &tables)
     : mesh::Mesh(radio, ms, rng, rtc, *new StaticPoolPacketManager(32), tables),
       _cli(board, rtc, sensors, &_prefs, this), telemetry(MAX_PACKET_PAYLOAD - 4), region_map(key_store), temp_map(key_store),
-      discover_limiter(4, 120)  // max 4 every 2 minutes
+      discover_limiter(4, 120),  // max 4 every 2 minutes
+      anon_limiter(4, 180)   // max 4 every 3 minutes
 #if defined(WITH_RS232_BRIDGE)
       , bridge(&_prefs, WITH_RS232_BRIDGE, _mgr, &rtc)
 #endif

examples/simple_repeater/MyMesh.h

@@ -88,12 +88,14 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
   NodePrefs _prefs;
   CommonCLI _cli;
   uint8_t reply_data[MAX_PACKET_PAYLOAD];
+  uint8_t reply_path[MAX_PATH_SIZE];
+  int8_t  reply_path_len;
   ClientACL  acl;
   TransportKeyStore key_store;
   RegionMap region_map, temp_map;
   RegionEntry* load_stack[8];
   RegionEntry* recv_pkt_region;
-  RateLimiter discover_limiter;
+  RateLimiter discover_limiter, anon_limiter;
   bool region_load_active;
   unsigned long dirty_contacts_expiry;
 #if MAX_NEIGHBOURS
@@ -114,6 +116,9 @@ class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
 
   void putNeighbour(const mesh::Identity& id, uint32_t timestamp, float snr);
   uint8_t handleLoginReq(const mesh::Identity& sender, const uint8_t* secret, uint32_t sender_timestamp, const uint8_t* data, bool is_flood);
+  uint8_t handleAnonRegionsReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
+  uint8_t handleAnonOwnerReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
+  uint8_t handleAnonClockReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
   int handleRequest(ClientInfo* sender, uint32_t sender_timestamp, uint8_t* payload, size_t payload_len);
   mesh::Packet* createSelfAdvert();
 

src/helpers/BaseChatMesh.cpp

@@ -55,6 +55,54 @@ void BaseChatMesh::sendAckTo(const ContactInfo& dest, uint32_t ack_hash) {
   }
 }
 
+void BaseChatMesh::bootstrapRTCfromContacts() {
+  uint32_t latest = 0;
+  for (int i = 0; i < num_contacts; i++) {
+    if (contacts[i].lastmod > latest) {
+      latest = contacts[i].lastmod;
+    }
+  }
+  if (latest != 0) {
+    getRTCClock()->setCurrentTime(latest + 1);
+  }
+}
+
+ContactInfo* BaseChatMesh::allocateContactSlot() {
+  if (num_contacts < MAX_CONTACTS) {
+    return &contacts[num_contacts++];
+  } else if (shouldOverwriteWhenFull()) {
+    // Find oldest non-favourite contact by oldest lastmod timestamp
+    int oldest_idx = -1;
+    uint32_t oldest_lastmod = 0xFFFFFFFF;
+    for (int i = 0; i < num_contacts; i++) {
+      bool is_favourite = (contacts[i].flags & 0x01) != 0;
+      if (!is_favourite && contacts[i].lastmod < oldest_lastmod) {
+        oldest_lastmod = contacts[i].lastmod;
+        oldest_idx = i;
+      }
+    }
+    if (oldest_idx >= 0) {
+      onContactOverwrite(contacts[oldest_idx].id.pub_key);
+      return &contacts[oldest_idx];
+    }
+  }
+  return NULL; // no space, no overwrite or all contacts are all favourites
+}
+
+void BaseChatMesh::populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp) {
+  memset(&ci, 0, sizeof(ci));
+  ci.id = id;
+  ci.out_path_len = -1;  // initially out_path is unknown
+  StrHelper::strncpy(ci.name, parser.getName(), sizeof(ci.name));
+  ci.type = parser.getType();
+  if (parser.hasLatLon()) {
+    ci.gps_lat = parser.getIntLat();
+    ci.gps_lon = parser.getIntLon();
+  }
+  ci.last_advert_timestamp = timestamp;
+  ci.lastmod = getRTCClock()->getCurrentTime();
+}
+
 void BaseChatMesh::onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id, uint32_t timestamp, const uint8_t* app_data, size_t app_data_len) {
   AdvertDataParser parser(app_data, app_data_len);
   if (!(parser.isValid() && parser.hasName())) {
@@ -87,48 +135,37 @@ void BaseChatMesh::onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id,
 
   bool is_new = false;
   if (from == NULL) {
-    if (!isAutoAddEnabled()) {
+    if (!shouldAutoAddContactType(parser.getType())) {
       ContactInfo ci;
-      memset(&ci, 0, sizeof(ci));
+      populateContactFromAdvert(ci, id, parser, timestamp);
-      ci.id = id;
-      ci.out_path_len = -1;  // initially out_path is unknown
-      StrHelper::strncpy(ci.name, parser.getName(), sizeof(ci.name));
-      ci.type = parser.getType();
-      if (parser.hasLatLon()) {
-        ci.gps_lat = parser.getIntLat();
-        ci.gps_lon = parser.getIntLon();
-      }
-      ci.last_advert_timestamp = timestamp;
-      ci.lastmod = getRTCClock()->getCurrentTime();
       onDiscoveredContact(ci, true, packet->path_len, packet->path);       // let UI know
       return;
     }
 
     is_new = true;
-    if (num_contacts < MAX_CONTACTS) {
+    from = allocateContactSlot();
-      from = &contacts[num_contacts++];
+    if (from == NULL) {
-      from->id = id;
+      ContactInfo ci;
-      from->out_path_len = -1;  // initially out_path is unknown
+      populateContactFromAdvert(ci, id, parser, timestamp);
-      from->gps_lat = 0;   // initially unknown GPS loc
+      onDiscoveredContact(ci, true, packet->path_len, packet->path);
-      from->gps_lon = 0;
+      onContactsFull();
-      from->sync_since = 0;
+      MESH_DEBUG_PRINTLN("onAdvertRecv: unable to allocate contact slot for new contact");
-
-      from->shared_secret_valid = false;  // ecdh shared_secret will be calculated later on demand  
-    } else {
-      MESH_DEBUG_PRINTLN("onAdvertRecv: contacts table is full!");
       return;
     }
+    
+    populateContactFromAdvert(*from, id, parser, timestamp);
+    from->sync_since = 0;
+    from->shared_secret_valid = false;
   }
-
   // update
-  StrHelper::strncpy(from->name, parser.getName(), sizeof(from->name));
+    StrHelper::strncpy(from->name, parser.getName(), sizeof(from->name));
-  from->type = parser.getType();
+    from->type = parser.getType();
-  if (parser.hasLatLon()) {
+    if (parser.hasLatLon()) {
-    from->gps_lat = parser.getIntLat();
+      from->gps_lat = parser.getIntLat();
-    from->gps_lon = parser.getIntLon();
+      from->gps_lon = parser.getIntLon();
-  }
+    }
-  from->last_advert_timestamp = timestamp;
+    from->last_advert_timestamp = timestamp;
-  from->lastmod = getRTCClock()->getCurrentTime();
+    from->lastmod = getRTCClock()->getCurrentTime();
 
   onDiscoveredContact(*from, is_new, packet->path_len, packet->path);       // let UI know
 }
@@ -477,6 +514,31 @@ int BaseChatMesh::sendLogin(const ContactInfo& recipient, const char* password,
   return MSG_SEND_FAILED;
 }
 
+int BaseChatMesh::sendAnonReq(const ContactInfo& recipient, const uint8_t* data, uint8_t len, uint32_t& tag, uint32_t& est_timeout) {
+  mesh::Packet* pkt;
+  {
+    uint8_t temp[MAX_PACKET_PAYLOAD];
+    tag = getRTCClock()->getCurrentTimeUnique();
+    memcpy(temp, &tag, 4);   // tag to match later (also extra blob to help make packet_hash unique)
+    memcpy(&temp[4], data, len);
+
+    pkt = createAnonDatagram(PAYLOAD_TYPE_ANON_REQ, self_id, recipient.id, recipient.getSharedSecret(self_id), temp, 4 + len);
+  }
+  if (pkt) {
+    uint32_t t = _radio->getEstAirtimeFor(pkt->getRawLength());
+    if (recipient.out_path_len < 0) {
+      sendFloodScoped(recipient, pkt);
+      est_timeout = calcFloodTimeoutMillisFor(t);
+      return MSG_SEND_SENT_FLOOD;
+    } else {
+      sendDirect(pkt, recipient.out_path, recipient.out_path_len);
+      est_timeout = calcDirectTimeoutMillisFor(t, recipient.out_path_len);
+      return MSG_SEND_SENT_DIRECT;
+    }
+  }
+  return MSG_SEND_FAILED;
+}
+
 int  BaseChatMesh::sendRequest(const ContactInfo& recipient, const uint8_t* req_data, uint8_t data_len, uint32_t& tag, uint32_t& est_timeout) {
   if (data_len > MAX_PACKET_PAYLOAD - 16) return MSG_SEND_FAILED;
 
@@ -697,10 +759,9 @@ ContactInfo* BaseChatMesh::lookupContactByPubKey(const uint8_t* pub_key, int pre
 }
 
 bool BaseChatMesh::addContact(const ContactInfo& contact) {
-  if (num_contacts < MAX_CONTACTS) {
+  ContactInfo* dest = allocateContactSlot();
-    auto dest = &contacts[num_contacts++];
+  if (dest) {
     *dest = contact;
-
     dest->shared_secret_valid = false; // mark shared_secret as needing calculation
     return true;  // success
   }

src/helpers/BaseChatMesh.h

@@ -88,10 +88,17 @@ protected:
     memset(connections, 0, sizeof(connections));
   }
 
+  void bootstrapRTCfromContacts();
   void resetContacts() { num_contacts = 0; }
+  void populateContactFromAdvert(ContactInfo& ci, const mesh::Identity& id, const AdvertDataParser& parser, uint32_t timestamp);
+  ContactInfo* allocateContactSlot(); // helper to find slot for new contact
 
   // 'UI' concepts, for sub-classes to implement
   virtual bool isAutoAddEnabled() const { return true; }
+  virtual bool shouldAutoAddContactType(uint8_t type) const { return true; }
+  virtual void onContactsFull() {};
+  virtual bool shouldOverwriteWhenFull() const { return false; }
+  virtual void onContactOverwrite(const uint8_t* pub_key) {};
   virtual void onDiscoveredContact(ContactInfo& contact, bool is_new, uint8_t path_len, const uint8_t* path) = 0;
   virtual ContactInfo* processAck(const uint8_t *data) = 0;
   virtual void onContactPathUpdated(const ContactInfo& contact) = 0;
@@ -141,6 +148,7 @@ public:
   int  sendCommandData(const ContactInfo& recipient, uint32_t timestamp, uint8_t attempt, const char* text, uint32_t& est_timeout);
   bool sendGroupMessage(uint32_t timestamp, mesh::GroupChannel& channel, const char* sender_name, const char* text, int text_len);
   int  sendLogin(const ContactInfo& recipient, const char* password, uint32_t& est_timeout);
+  int  sendAnonReq(const ContactInfo& recipient, const uint8_t* data, uint8_t len, uint32_t& tag, uint32_t& est_timeout);
   int  sendRequest(const ContactInfo& recipient, uint8_t req_type, uint32_t& tag, uint32_t& est_timeout);
   int  sendRequest(const ContactInfo& recipient, const uint8_t* req_data, uint8_t data_len, uint32_t& tag, uint32_t& est_timeout);
   bool shareContactZeroHop(const ContactInfo& contact);

src/helpers/CommonCLI.cpp

@@ -14,6 +14,14 @@ static uint32_t _atoi(const char* sp) {
   return n;
 }
 
+static bool isValidName(const char *n) {
+  while (*n) {
+    if (*n == '[' || *n == ']' || *n == '/' || *n == '\\' || *n == ':' || *n == ',' || *n == '?' || *n == '*') return false;
+    n++;
+  }
+  return true;
+}
+
 void CommonCLI::loadPrefs(FILESYSTEM* fs) {
   if (fs->exists("/com_prefs")) {
     loadPrefsInt(fs, "/com_prefs");   // new filename
@@ -72,7 +80,8 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     file.read((uint8_t *)&_prefs->advert_loc_policy, sizeof (_prefs->advert_loc_policy));          // 161
     file.read((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
     file.read((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier)); // 166
-    // 170
+    file.read((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));  // 170
+    // 290
 
     // sanitise bad pref values
     _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
@@ -155,7 +164,8 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *)&_prefs->advert_loc_policy, sizeof(_prefs->advert_loc_policy));           // 161
     file.write((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
     file.write((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier));                 // 166
-    // 170
+    file.write((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));  // 170
+    // 290
 
     file.close();
   }
@@ -301,6 +311,15 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         sprintf(reply, "> %d", (uint32_t)_prefs->flood_max);
       } else if (memcmp(config, "direct.txdelay", 14) == 0) {
         sprintf(reply, "> %s", StrHelper::ftoa(_prefs->direct_tx_delay_factor));
+      } else if (memcmp(config, "owner.info", 10) == 0) {
+        *reply++ = '>';
+        *reply++ = ' ';
+        const char* sp = _prefs->owner_info;
+        while (*sp) {
+          *reply++ = (*sp == '\n') ? '|' : *sp;    // translate newline back to orig '|'
+          sp++;
+        }
+        *reply = 0;  // set null terminator
       } else if (memcmp(config, "tx", 2) == 0 && (config[2] == 0 || config[2] == ' ')) {
         sprintf(reply, "> %d", (uint32_t) _prefs->tx_power_dbm);
       } else if (memcmp(config, "freq", 4) == 0) {
@@ -410,9 +429,13 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
           strcpy(reply, "Error, invalid key");
         }
       } else if (memcmp(config, "name ", 5) == 0) {
-        StrHelper::strncpy(_prefs->node_name, &config[5], sizeof(_prefs->node_name));
+        if (isValidName(&config[5])) {
-        savePrefs();
+          StrHelper::strncpy(_prefs->node_name, &config[5], sizeof(_prefs->node_name));
-        strcpy(reply, "OK");
+          savePrefs();
+          strcpy(reply, "OK");
+        } else {
+          strcpy(reply, "Error, bad chars");
+        }
       } else if (memcmp(config, "repeat ", 7) == 0) {
         _prefs->disable_fwd = memcmp(&config[7], "off", 3) == 0;
         savePrefs();
@@ -479,6 +502,16 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         } else {
           strcpy(reply, "Error, cannot be negative");
         }
+      } else if (memcmp(config, "owner.info ", 11) == 0) {
+        config += 11;
+        char *dp = _prefs->owner_info;
+        while (*config && dp - _prefs->owner_info < sizeof(_prefs->owner_info)-1) {
+          *dp++ = (*config == '|') ? '\n' : *config;    // translate '|' to newline chars
+          config++;
+        }
+        *dp = 0;
+        savePrefs();
+        strcpy(reply, "OK");
       } else if (memcmp(config, "tx ", 3) == 0) {
         _prefs->tx_power_dbm = atoi(&config[3]);
         savePrefs();

src/helpers/CommonCLI.h

@@ -50,6 +50,7 @@ struct NodePrefs { // persisted to file
   uint8_t advert_loc_policy;
   uint32_t discovery_mod_timestamp;
   float adc_multiplier;
+  char owner_info[120];
 };
 
 class CommonCLICallbacks {

src/helpers/RegionMap.cpp

@@ -9,8 +9,9 @@ RegionMap::RegionMap(TransportKeyStore& store) : _store(&store) {
   strcpy(wildcard.name, "*");
 }
 
-bool RegionMap::is_name_char(char c) {
+bool RegionMap::is_name_char(uint8_t c) {
-  return (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z') || (c >= '0' && c <= '9') || c == '-' || c == '.' || c == '_' || c == '#';
+  // accept all alpha-num or accented characters, but exclude most punctuation chars
+  return c == '-' || c == '#' || (c >= '0' && c <= '9') || c >= 'A';
 }
 
 static File openWrite(FILESYSTEM* _fs, const char* filename) {
@@ -24,12 +25,12 @@ static File openWrite(FILESYSTEM* _fs, const char* filename) {
   #endif
 }
 
-bool RegionMap::load(FILESYSTEM* _fs) {
+bool RegionMap::load(FILESYSTEM* _fs, const char* path) {
-  if (_fs->exists("/regions2")) {
+  if (_fs->exists(path ? path : "/regions2")) {
   #if defined(RP2040_PLATFORM)
-    File file = _fs->open("/regions2", "r");
+    File file = _fs->open(path ? path : "/regions2", "r");
   #else
-    File file = _fs->open("/regions2");
+    File file = _fs->open(path ? path : "/regions2");
   #endif
 
     if (file) {
@@ -67,8 +68,8 @@ bool RegionMap::load(FILESYSTEM* _fs) {
   return false;  // failed
 }
 
-bool RegionMap::save(FILESYSTEM* _fs) {
+bool RegionMap::save(FILESYSTEM* _fs, const char* path) {
-  File file = openWrite(_fs, "/regions2");
+  File file = openWrite(_fs, path ? path : "/regions2");
   if (file) {
     uint8_t pad[128];
     memset(pad, 0, sizeof(pad));
@@ -235,3 +236,27 @@ void RegionMap::printChildRegions(int indent, const RegionEntry* parent, Stream&
 void RegionMap::exportTo(Stream& out) const {
   printChildRegions(0, &wildcard, out);   // recursive
 }
+
+int RegionMap::exportNamesTo(char *dest, int max_len, uint8_t mask) {
+  char *dp = dest;
+  if ((wildcard.flags & mask) == 0) {
+    *dp++ = '*';
+    *dp++ = ',';
+  }
+
+  for (int i = 0; i < num_regions; i++) {
+    auto region = &regions[i];
+    if ((region->flags & mask) == 0) {   // region allowed? (per 'mask' param)
+      int len = strlen(region->name);
+      if ((dp - dest) + len + 2 < max_len) {   // only append if name will fit
+        memcpy(dp, region->name, len);
+        dp += len;
+        *dp++ = ',';
+      }
+    }
+  }
+  if (dp > dest) { dp--; }   // don't include trailing comma
+
+  *dp = 0;  // set null terminator
+  return dp - dest;   // return length
+}

src/helpers/RegionMap.h

@@ -30,10 +30,10 @@ class RegionMap {
 public:
   RegionMap(TransportKeyStore& store);
 
-  static bool is_name_char(char c);
+  static bool is_name_char(uint8_t c);
 
-  bool load(FILESYSTEM* _fs);
+  bool load(FILESYSTEM* _fs, const char* path=NULL);
-  bool save(FILESYSTEM* _fs);
+  bool save(FILESYSTEM* _fs, const char* path=NULL);
 
   RegionEntry* putRegion(const char* name, uint16_t parent_id, uint16_t id = 0);
   RegionEntry* findMatch(mesh::Packet* packet, uint8_t mask);
@@ -47,6 +47,9 @@ public:
   bool clear();
   void resetFrom(const RegionMap& src) { num_regions = 0; next_id = src.next_id; }
   int getCount() const { return num_regions; }
+  const RegionEntry* getByIdx(int i) const { return &regions[i]; }
+  const RegionEntry* getRoot() const { return &wildcard; }
+  int exportNamesTo(char *dest, int max_len, uint8_t mask);
 
   void exportTo(Stream& out) const;
 };

variants/heltec_v3/platformio.ini

@@ -323,7 +323,7 @@ lib_deps =
 extends = Heltec_lora32_v3
 build_flags =
   ${Heltec_lora32_v3.build_flags}
-  -D MAX_CONTACTS=140
+  -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1

variants/ikoka_handheld_nrf/platformio.ini

@@ -1,8 +1,5 @@
-[ikoka_nrf52]
+[ikoka_handheld_nrf]
-extends = Xiao_nrf52
+extends = nrf52_base
-lib_deps = ${nrf52_base.lib_deps}
-  ${sensor_base.lib_deps}
-  densaugeo/base64 @ ~1.4.0  
 build_flags = ${nrf52_base.build_flags}
   ${sensor_base.build_flags}
   -I lib/nrf52/s140_nrf52_7.3.0_API/include
@@ -26,12 +23,15 @@ build_flags = ${nrf52_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter}
   +<../variants/ikoka_handheld_nrf>
   +<helpers/sensors>
+lib_deps = ${nrf52_base.lib_deps}
+  ${sensor_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
 
 # larger screen has a different driver, this is for the 0.96 inch
-[ikoka_nrf52_ssd1306_companion]
+[ikoka_handheld_nrf_ssd1306_companion]
-lib_deps = ${ikoka_nrf52.lib_deps}
+lib_deps = ${ikoka_handheld_nrf.lib_deps}
   adafruit/Adafruit SSD1306 @ ^2.5.13
-build_flags = ${ikoka_nrf52.build_flags}
+build_flags = ${ikoka_handheld_nrf.build_flags}
   -D DISPLAY_CLASS=SSD1306Display
   -D DISPLAY_ROTATION=0
   -D PIN_WIRE_SCL=D6
@@ -42,62 +42,62 @@ build_flags = ${ikoka_nrf52.build_flags}
   -D OFFLINE_QUEUE_SIZE=256
   -D QSPIFLASH=1
   -I examples/companion_radio/ui-new
-build_src_filter = ${ikoka_nrf52.build_src_filter}
+build_src_filter = ${ikoka_handheld_nrf.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<../examples/companion_radio/ui-new/UITask.cpp>
   +<../examples/companion_radio/*.cpp>
 
 [env:ikoka_handheld_nrf_e22_30dbm_096_companion_radio_ble]
 extends = ikoka_nrf52
-build_flags = ${ikoka_nrf52_ssd1306_companion.build_flags}
+build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
   -D BLE_PIN_CODE=123456
   -D LORA_TX_POWER=20
-build_src_filter = ${ikoka_nrf52_ssd1306_companion.build_src_filter}
+build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
 
 [env:ikoka_handheld_nrf_e22_30dbm_096_rotated_companion_radio_ble]
 extends = ikoka_nrf52
-build_flags = ${ikoka_nrf52_ssd1306_companion.build_flags}
+build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
   -D BLE_PIN_CODE=123456
   -D LORA_TX_POWER=20
-  -D DISPLAY_ROTATION=2    
+  -D DISPLAY_ROTATION=2
-build_src_filter = ${ikoka_nrf52_ssd1306_companion.build_src_filter}
+build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
 
 [env:ikoka_handheld_nrf_e22_30dbm_096_companion_radio_usb]
 extends = ikoka_nrf52
-build_flags = ${ikoka_nrf52_ssd1306_companion.build_flags}
+build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
   -D LORA_TX_POWER=20
-build_src_filter = ${ikoka_nrf52_ssd1306_companion.build_src_filter}
+build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
 
 [env:ikoka_handheld_nrf_e22_30dbm_096_rotated_companion_radio_usb]
 extends = ikoka_nrf52
-build_flags = ${ikoka_nrf52_ssd1306_companion.build_flags}
+build_flags = ${ikoka_handheld_nrf_ssd1306_companion.build_flags}
   -D LORA_TX_POWER=20
   -D DISPLAY_ROTATION=2
-build_src_filter = ${ikoka_nrf52_ssd1306_companion.build_src_filter}
+build_src_filter = ${ikoka_handheld_nrf_ssd1306_companion.build_src_filter}
 
 [env:ikoka_handheld_nrf_e22_30dbm_repeater]
 extends = ikoka_nrf52
 build_flags =
-  ${ikoka_nrf52.build_flags}
+  ${ikoka_handheld_nrf.build_flags}
   -D ADVERT_NAME='"ikoka_handheld Repeater"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
   -D ADMIN_PASSWORD='"password"'
   -D MAX_NEIGHBOURS=50
-  -D LORA_TX_POWER=20  
+  -D LORA_TX_POWER=20
-build_src_filter = ${ikoka_nrf52.build_src_filter}
+build_src_filter = ${ikoka_handheld_nrf.build_src_filter}
   +<../examples/simple_repeater/*.cpp>
 
 [env:ikoka_handheld_nrf_e22_30dbm_room_server]
 extends = ikoka_nrf52
 build_flags =
-  ${ikoka_nrf52.build_flags}
+  ${ikoka_handheld_nrf.build_flags}
   -D ADVERT_NAME='"ikoka_handheld Room"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
   -D ADMIN_PASSWORD='"password"'
-  -D LORA_TX_POWER=20  
+  -D LORA_TX_POWER=20
-build_src_filter = ${ikoka_nrf52.build_src_filter}
+build_src_filter = ${ikoka_handheld_nrf.build_src_filter}
   +<../examples/simple_room_server/*.cpp>

variants/ikoka_nano_nrf/platformio.ini

@@ -1,151 +1,124 @@
-[nrf52840_xiao]
+[ikoka_nano_nrf]
 extends = nrf52_base
-platform_packages =
-  toolchain-gccarmnoneeabi@~1.100301.0
-  framework-arduinoadafruitnrf52
 board = seeed-xiao-afruitnrf52-nrf52840
 board_build.ldscript = boards/nrf52840_s140_v7.ld
 build_flags = ${nrf52_base.build_flags}
+   ${sensor_base.build_flags}
   -D NRF52_PLATFORM -D XIAO_NRF52
   -I lib/nrf52/s140_nrf52_7.3.0_API/include
   -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
-lib_ignore =
-  BluetoothOTA
-  lvgl
-  lib5b4
-lib_deps =
-  ${nrf52_base.lib_deps}
-  rweather/Crypto @ ^0.4.0
-  adafruit/Adafruit INA3221 Library @ ^1.0.1
-  adafruit/Adafruit INA219 @ ^1.2.3
-  adafruit/Adafruit AHTX0 @ ^2.0.5
-  adafruit/Adafruit BME280 Library @ ^2.3.0
-  adafruit/Adafruit SSD1306 @ ^2.5.13
-
-[ikoka_nano_nrf_baseboard]
-extends = nrf52840_xiao
-;board_build.ldscript = boards/nrf52840_s140_v7.ld
-build_flags = ${nrf52840_xiao.build_flags}
-  -D P_LORA_TX_LED=11
   -I variants/ikoka_nano_nrf
   -I src/helpers/nrf52
+  -D P_LORA_TX_LED=11
   -D DISPLAY_CLASS=NullDisplayDriver
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_DIO_1=D1
-;  -D P_LORA_BUSY=D3
+  -D P_LORA_BUSY=D2
-  -D P_LORA_BUSY=D2 ; specific to ikoka nano variant.
+  -D P_LORA_RESET=D3
-;  -D P_LORA_RESET=D2
+  -D P_LORA_NSS=D0
-  -D P_LORA_RESET=D3 ; specific to ikoka nano variant.
-;  -D P_LORA_NSS=D4
-  -D P_LORA_NSS=D0 ; specific to ikoka nano variant.
-;  -D SX126X_RXEN=D5
   -D SX126X_RXEN=D7
   -D SX126X_TXEN=RADIOLIB_NC
   -D SX126X_DIO2_AS_RF_SWITCH=1
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
-  -D PIN_WIRE_SCL=5 ; specific to ikoka nano variant.
+  -D PIN_WIRE_SCL=5
-  -D PIN_WIRE_SDA=4 ; specific to ikoka nano variant.
+  -D PIN_WIRE_SDA=4
-  -D ENV_INCLUDE_AHTX0=1
+  -UENV_INCLUDE_GPS
-  -D ENV_INCLUDE_BME280=1
-  -D ENV_INCLUDE_INA3221=1
-  -D ENV_INCLUDE_INA219=1
 debug_tool = jlink
 upload_protocol = nrfutil
-
+lib_deps = ${nrf52_base.lib_deps}
-
+   ${sensor_base.lib_deps}
-;;; abstracted hardware variants
 
 [ikoka_nano_nrf_e22_22dbm]
-extends = ikoka_nano_nrf_baseboard
+extends = ikoka_nano_nrf
 ; No PA in this model, full 22dBm
 build_flags =
-  ${ikoka_nano_nrf_baseboard.build_flags}
+  ${ikoka_nano_nrf.build_flags}
   -D MANUFACTURER_STRING='"Ikoka Nano-E22-22dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=22
-build_src_filter = ${nrf52840_xiao.build_src_filter}
+build_src_filter = ${ikoka_nano_nrf.build_src_filter}
   +<helpers/*.cpp>
   +<helpers/sensors>
   +<helpers/ui/NullDisplayDriver.cpp>
   +<../variants/ikoka_nano_nrf>
 
 [ikoka_nano_nrf_e22_30dbm]
-extends = ikoka_nano_nrf_baseboard
+extends = ikoka_nano_nrf
 ; limit txpower to 20dBm on E22-900M30S. Anything higher will
 ; cause distortion in the PA output. 20dBm in -> 30dBm out
 build_flags =
-  ${ikoka_nano_nrf_baseboard.build_flags}
+  ${ikoka_nano_nrf.build_flags}
   -D MANUFACTURER_STRING='"Ikoka Nano-E22-30dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=20
-build_src_filter = ${nrf52840_xiao.build_src_filter}
+build_src_filter = ${ikoka_nano_nrf.build_src_filter}
   +<helpers/*.cpp>
   +<helpers/sensors>
   +<helpers/ui/NullDisplayDriver.cpp>
   +<../variants/ikoka_nano_nrf>
 
 [ikoka_nano_nrf_e22_33dbm]
-extends = ikoka_nano_nrf_baseboard
+extends = ikoka_nano_nrf
 ; limit txpower to 9dBm on E22-900M33S to avoid hardware damage
 ; to the rf amplifier frontend. 9dBm in -> 33dBm out
 build_flags =
-  ${ikoka_nano_nrf_baseboard.build_flags}
+  ${ikoka_nano_nrf.build_flags}
   -D MANUFACTURER_STRING='"Ikoka Nano-E22-33dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=9
-build_src_filter = ${nrf52840_xiao.build_src_filter}
+build_src_filter = ${ikoka_nano_nrf.build_src_filter}
   +<helpers/*.cpp>
   +<helpers/sensors>
   +<helpers/ui/NullDisplayDriver.cpp>
   +<../variants/ikoka_nano_nrf>
 
-;;; abstracted firmware roles
-
 [ikoka_nano_nrf_companion_radio_ble]
-extends = ikoka_nano_nrf_baseboard
+extends = ikoka_nano_nrf
 board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
 board_upload.maximum_size = 708608
 build_flags =
-  ${ikoka_nano_nrf_baseboard.build_flags}
+  ${ikoka_nano_nrf.build_flags}
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D BLE_PIN_CODE=123456
   -D OFFLINE_QUEUE_SIZE=256
   -I examples/companion_radio/ui-new
+  -D QSPIFLASH=1
 ;  -D BLE_DEBUG_LOGGING=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_nano_nrf_baseboard.build_src_filter}
+build_src_filter = ${ikoka_nano_nrf.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${ikoka_nano_nrf_baseboard.lib_deps}
+  ${ikoka_nano_nrf.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
 [ikoka_nano_nrf_companion_radio_usb]
-extends = ikoka_nano_nrf_baseboard
+extends = ikoka_nano_nrf
 board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
 board_upload.maximum_size = 708608
 build_flags =
-  ${ikoka_nano_nrf_baseboard.build_flags}
+  ${ikoka_nano_nrf.build_flags}
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -I examples/companion_radio/ui-new
+  -D QSPIFLASH=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_nano_nrf_baseboard.build_src_filter}
+build_src_filter = ${ikoka_nano_nrf.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${ikoka_nano_nrf_baseboard.lib_deps}
+  ${ikoka_nano_nrf.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
 [ikoka_nano_nrf_repeater]
-extends = ikoka_nano_nrf_baseboard
+extends = ikoka_nano_nrf
 build_flags =
-  ${ikoka_nano_nrf_baseboard.build_flags}
+  ${ikoka_nano_nrf.build_flags}
   -D ADVERT_NAME='"Ikoka Nano Repeater"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
@@ -153,26 +126,23 @@ build_flags =
   -D MAX_NEIGHBOURS=50
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_nano_nrf_baseboard.build_src_filter}
+build_src_filter = ${ikoka_nano_nrf.build_src_filter}
   +<../examples/simple_repeater/*.cpp>
 
 [ikoka_nano_nrf_room_server]
-extends = ikoka_nano_nrf_baseboard
+extends = ikoka_nano_nrf
 build_flags =
-  ${ikoka_nano_nrf_baseboard.build_flags}
+  ${ikoka_nano_nrf.build_flags}
   -D ADVERT_NAME='"Ikoka Nano Room"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
   -D ADMIN_PASSWORD='"password"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_nano_nrf_baseboard.build_src_filter}
+build_src_filter = ${ikoka_nano_nrf.build_src_filter}
   +<../examples/simple_room_server/*.cpp>
 
-;;; hardware + firmware variants
-
 ;;;    22dBm EBYTE E22-900M22 variants
-
 [env:ikoka_nano_nrf_22dbm_companion_radio_usb]
 extends =
    ikoka_nano_nrf_e22_22dbm
@@ -219,7 +189,6 @@ build_src_filter =
 
 
 ;;;    30dBm EBYTE E22-900M30 variants
-
 [env:ikoka_nano_nrf_30dbm_companion_radio_usb]
 extends =
    ikoka_nano_nrf_e22_30dbm
@@ -266,7 +235,6 @@ build_src_filter =
 
 
 ;;;    33dBm EBYTE E22-900M33 variants
-
 [env:ikoka_nano_nrf_33dbm_companion_radio_usb]
 extends =
    ikoka_nano_nrf_e22_33dbm

variants/ikoka_stick_nrf/platformio.ini

@@ -1,34 +1,15 @@
-[nrf52840_xiao]
+[ikoka_stick_nrf]
 extends = nrf52_base
-platform_packages =
-  toolchain-gccarmnoneeabi@~1.100301.0
-  framework-arduinoadafruitnrf52
 board = seeed-xiao-afruitnrf52-nrf52840
 board_build.ldscript = boards/nrf52840_s140_v7.ld
 build_flags = ${nrf52_base.build_flags}
+  ${sensor_base.build_flags}
   -D NRF52_PLATFORM -D XIAO_NRF52
   -I lib/nrf52/s140_nrf52_7.3.0_API/include
   -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
-lib_ignore =
-  BluetoothOTA
-  lvgl
-  lib5b4
-lib_deps =
-  ${nrf52_base.lib_deps}
-  rweather/Crypto @ ^0.4.0
-  adafruit/Adafruit INA3221 Library @ ^1.0.1
-  adafruit/Adafruit INA219 @ ^1.2.3
-  adafruit/Adafruit AHTX0 @ ^2.0.5
-  adafruit/Adafruit BME280 Library @ ^2.3.0
-  adafruit/Adafruit SSD1306 @ ^2.5.13
-
-[ikoka_stick_nrf_baseboard]
-extends = nrf52840_xiao
-;board_build.ldscript = boards/nrf52840_s140_v7.ld
-build_flags = ${nrf52840_xiao.build_flags}
-  -D P_LORA_TX_LED=11
   -I variants/ikoka_stick_nrf
   -I src/helpers/nrf52
+  -D P_LORA_TX_LED=11
   -D DISPLAY_CLASS=SSD1306Display
   -D DISPLAY_ROTATION=2
   -D RADIO_CLASS=CustomSX1262
@@ -46,24 +27,18 @@ build_flags = ${nrf52840_xiao.build_flags}
   -D PIN_USER_BTN=0
   -D PIN_WIRE_SCL=7
   -D PIN_WIRE_SDA=6
-  -D ENV_INCLUDE_AHTX0=1
+  -UENV_INCLUDE_GPS
-  -D ENV_INCLUDE_BME280=1
+lib_deps = ${nrf52_base.lib_deps}
-  -D ENV_INCLUDE_INA3221=1
+  ${sensor_base.lib_deps}
-  -D ENV_INCLUDE_INA219=1
-debug_tool = jlink
-upload_protocol = nrfutil
-
-
-;;; abstracted hardware variants
 
 [ikoka_stick_nrf_e22_22dbm]
-extends = ikoka_stick_nrf_baseboard
+extends = ikoka_stick_nrf
 ; No PA in this model, full 22dBm
 build_flags =
-  ${ikoka_stick_nrf_baseboard.build_flags}
+  ${ikoka_stick_nrf.build_flags}
   -D MANUFACTURER_STRING='"Ikoka Stick-E22-22dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=22
-build_src_filter = ${nrf52840_xiao.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf.build_src_filter}
   +<helpers/*.cpp>
   +<helpers/sensors>
   +<helpers/ui/MomentaryButton.cpp>
@@ -71,14 +46,14 @@ build_src_filter = ${nrf52840_xiao.build_src_filter}
   +<../variants/ikoka_stick_nrf>
 
 [ikoka_stick_nrf_e22_30dbm]
-extends = ikoka_stick_nrf_baseboard
+extends = ikoka_stick_nrf
 ; limit txpower to 20dBm on E22-900M30S. Anything higher will
 ; cause distortion in the PA output. 20dBm in -> 30dBm out
 build_flags =
-  ${ikoka_stick_nrf_baseboard.build_flags}
+  ${ikoka_stick_nrf.build_flags}
   -D MANUFACTURER_STRING='"Ikoka Stick-E22-30dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=20
-build_src_filter = ${nrf52840_xiao.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf.build_src_filter}
   +<helpers/*.cpp>
   +<helpers/sensors>
   +<helpers/ui/MomentaryButton.cpp>
@@ -86,14 +61,14 @@ build_src_filter = ${nrf52840_xiao.build_src_filter}
   +<../variants/ikoka_stick_nrf>
 
 [ikoka_stick_nrf_e22_33dbm]
-extends = ikoka_stick_nrf_baseboard
+extends = ikoka_stick_nrf
 ; limit txpower to 9dBm on E22-900M33S to avoid hardware damage
 ; to the rf amplifier frontend. 9dBm in -> 33dBm out
 build_flags =
-  ${ikoka_stick_nrf_baseboard.build_flags}
+  ${ikoka_stick_nrf.build_flags}
   -D MANUFACTURER_STRING='"Ikoka Stick-E22-33dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=9
-build_src_filter = ${nrf52840_xiao.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf.build_src_filter}
   +<helpers/*.cpp>
   +<helpers/sensors>
   +<helpers/ui/MomentaryButton.cpp>
@@ -103,50 +78,52 @@ build_src_filter = ${nrf52840_xiao.build_src_filter}
 ;;; abstracted firmware roles
 
 [ikoka_stick_nrf_companion_radio_ble]
-extends = ikoka_stick_nrf_baseboard
+extends = ikoka_stick_nrf
 board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
 board_upload.maximum_size = 708608
 build_flags =
-  ${ikoka_stick_nrf_baseboard.build_flags}
+  ${ikoka_stick_nrf.build_flags}
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D BLE_PIN_CODE=123456
   -D OFFLINE_QUEUE_SIZE=256
   -I examples/companion_radio/ui-new
+  -D QSPIFLASH=1
 ;  -D BLE_DEBUG_LOGGING=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${ikoka_stick_nrf_baseboard.lib_deps}
+  ${ikoka_stick_nrf.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
 [ikoka_stick_nrf_companion_radio_usb]
-extends = ikoka_stick_nrf_baseboard
+extends = ikoka_stick_nrf
 board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
 board_upload.maximum_size = 708608
 build_flags =
-  ${ikoka_stick_nrf_baseboard.build_flags}
+  ${ikoka_stick_nrf.build_flags}
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -I examples/companion_radio/ui-new
+  -D QSPIFLASH=1
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf.build_src_filter}
   +<helpers/nrf52/SerialBLEInterface.cpp>
   +<../examples/companion_radio/*.cpp>
   +<../examples/companion_radio/ui-new/*.cpp>
 lib_deps =
-  ${ikoka_stick_nrf_baseboard.lib_deps}
+  ${ikoka_stick_nrf.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
 [ikoka_stick_nrf_repeater]
-extends = ikoka_stick_nrf_baseboard
+extends = ikoka_stick_nrf
 build_flags =
-  ${ikoka_stick_nrf_baseboard.build_flags}
+  ${ikoka_stick_nrf.build_flags}
   -D ADVERT_NAME='"Ikoka Stick Repeater"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
@@ -154,21 +131,21 @@ build_flags =
   -D MAX_NEIGHBOURS=50
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<../examples/simple_repeater/*.cpp>
 
 [ikoka_stick_nrf_room_server]
-extends = ikoka_stick_nrf_baseboard
+extends = ikoka_stick_nrf
 build_flags =
-  ${ikoka_stick_nrf_baseboard.build_flags}
+  ${ikoka_stick_nrf.build_flags}
   -D ADVERT_NAME='"Ikoka Stick Room"'
   -D ADVERT_LAT=0.0
   -D ADVERT_LON=0.0
   -D ADMIN_PASSWORD='"password"'
 ;  -D MESH_PACKET_LOGGING=1
 ;  -D MESH_DEBUG=1
-build_src_filter = ${ikoka_stick_nrf_baseboard.build_src_filter}
+build_src_filter = ${ikoka_stick_nrf.build_src_filter}
   +<../examples/simple_room_server/*.cpp>
 
 ;;; hardware + firmware variants

variants/lilygo_t3s3_sx1276/platformio.ini

@@ -138,8 +138,6 @@ build_flags =
   -D DISPLAY_CLASS=SSD1306Display
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
-  -D MESH_PACKET_LOGGING=1
-  -D MESH_DEBUG=1
 build_src_filter = ${LilyGo_T3S3_sx1276.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
   +<helpers/ui/MomentaryButton.cpp>