README.md aktualisiert

Add LilyGo T-ETH Elite SX1262 board support

.github/FUNDING.yml

@@ -0,0 +1 @@
+github: meshcore-dev

README.md

@@ -1,135 +1,39 @@
+# Meshcore EVO - AOI Edition
 
-## About MeshCore-Evo
+Diese Firmware wurde verändert:
 
-This is a friendly fork of the MeshCore project. 
-Its aim is to provide repeater firmwares with a few additional pending upstream PRs/improvements (i.e. PRs/improvements that are available to the MeshCore project but have not yet been merged in the upstream repo or PRs that might never be merged upstream for some reason).
-These changes are intended to help mitigating challenges in big or dense meshes, e.g.:
+* Modifikation der Sensor-Firmware
+* Gestestet mit Heltec V4
+* Sollte theoretisch mit allen ESP-Boards funktionieren
+* GPIO15 und GPIO16 sind jeweils als Pullup-Eingang definiert.
 
-- Dealing with flood advert traffic
-- improving `denyf *` handling
+### Neue Befehle:
 
-This list might change any time.
-Refer to the [release notes](https://github.com/mattzzw/MeshCore-Evo/releases) for an up-to-date list of the applied changes.
+* "io" gibt den zustand aller 32 GPIO-Pins als Hexcode aus. (Die originale FW gibt eine festcodierte 0 aus.)
+* "bin" gibt den zustand aller 32 GPIO-Pins als Binärcode aus
+* "readpin <pin>" gibt den zustand eines Pins als ON/OFF aus
 
+### Verwendung:
 
+* GPIO 15 oder 16 können z.B. mit einm Schalter oder Relais verbunden werden.
+* Der standardmäßige zustand ist "ON", da intern 3,3V anliegen (Pull-Up Widerstand)
+* Wird ein GPIO nach Masse geschaltet, wechselt der Zustand nach "OFF"
+* Mit "readpin 0" kann als Test der User Button ausgelesen werden.
 
-## About MeshCore
+#### Beispiel:
 
-MeshCore is a lightweight, portable C++ library that enables multi-hop packet routing for embedded projects using LoRa and other packet radios. It is designed for developers who want to create resilient, decentralized communication networks that work without the internet.
+Eine laufende Anlage hält ein Überwachungsrelais ständig angezogen, und schaltet GPIO15
+nach Masse. Der Zustand ist daher "OFF" (das könnte als Alarm: OFF gelesen werden).
 
-## 🔍 What is MeshCore?
+Fällt die Stromversorgung der Anlage aus, fällt das Relais ab. Der Zustand von GPIO15
+wechselt daher auf "ON" (das könnte wiederum als Alarm: ON gelesen werden)
 
-MeshCore now supports a range of LoRa devices, allowing for easy flashing without the need to compile firmware manually. Users can flash a pre-built binary using tools like Adafruit ESPTool and interact with the network through a serial console.
-MeshCore provides the ability to create wireless mesh networks, similar to Meshtastic and Reticulum but with a focus on lightweight multi-hop packet routing for embedded projects. Unlike Meshtastic, which is tailored for casual LoRa communication, or Reticulum, which offers advanced networking, MeshCore balances simplicity with scalability, making it ideal for custom embedded solutions., where devices (nodes) can communicate over long distances by relaying messages through intermediate nodes. This is especially useful in off-grid, emergency, or tactical situations where traditional communication infrastructure is unavailable.
+### Hardware:
 
-## ⚡ Key Features
+#### Heltec V4:
+* Firmware kompiliert fehlerfrei und funktioniert
+* Der USR-Button kann mit "readpin 0" gelesen werden
 
-* Multi-Hop Packet Routing
-  * Devices can forward messages across multiple nodes, extending range beyond a single radio's reach.
-  * Supports up to a configurable number of hops to balance network efficiency and prevent excessive traffic.
-  * Nodes use fixed roles where "Companion" nodes are not repeating messages at all to prevent adverse routing paths from being used.
-* Supports LoRa Radios – Works with Heltec, RAK Wireless, and other LoRa-based hardware.
-* Decentralized & Resilient – No central server or internet required; the network is self-healing.
-* Low Power Consumption – Ideal for battery-powered or solar-powered devices.
-* Simple to Deploy – Pre-built example applications make it easy to get started.
-
-## 🎯 What Can You Use MeshCore For?
-
-* Off-Grid Communication: Stay connected even in remote areas.
-* Emergency Response & Disaster Recovery: Set up instant networks where infrastructure is down.
-* Outdoor Activities: Hiking, camping, and adventure racing communication.
-* Tactical & Security Applications: Military, law enforcement, and private security use cases.
-* IoT & Sensor Networks: Collect data from remote sensors and relay it back to a central location.
-
-## 🚀 How to Get Started
-
-- Watch the [MeshCore Intro Video](https://www.youtube.com/watch?v=t1qne8uJBAc) by Andy Kirby.
-- Watch the [MeshCore Technical Presentation](https://www.youtube.com/watch?v=OwmkVkZQTf4) by Liam Cottle.
-- Read through our [Frequently Asked Questions](./docs/faq.md) and [Documentation](https://docs.meshcore.io).
-- Flash the MeshCore firmware on a supported device.
-- Connect with a supported client.
-
-For developers;
-
-- Install [PlatformIO](https://docs.platformio.org) in [Visual Studio Code](https://code.visualstudio.com).
-- Clone and open the MeshCore repository in Visual Studio Code.
-- See the example applications you can modify and run:
-  - [Companion Radio](./examples/companion_radio) - For use with an external chat app, over BLE, USB or WiFi.
-  - [KISS Modem](./examples/kiss_modem) - Serial KISS protocol bridge for host applications. ([protocol docs](./docs/kiss_modem_protocol.md))
-  - [Simple Repeater](./examples/simple_repeater) - Extends network coverage by relaying messages.
-  - [Simple Room Server](./examples/simple_room_server) - A simple BBS server for shared Posts.
-  - [Simple Secure Chat](./examples/simple_secure_chat) - Secure terminal based text communication between devices.
-  - [Simple Sensor](./examples/simple_sensor) - Remote sensor node with telemetry and alerting.
-
-The Simple Secure Chat example can be interacted with through the Serial Monitor in Visual Studio Code, or with a Serial USB Terminal on Android.
-
-## ⚡️ MeshCore Flasher
-
-We have prebuilt firmware ready to flash on supported devices.
-
-- Launch https://meshcore.io/flasher
-- Select a supported device
-- Flash one of the firmware types:
-  - Companion, Repeater or Room Server
-- Once flashing is complete, you can connect with one of the MeshCore clients below.
-
-## 📱 MeshCore Clients
-
-**Companion Firmware**
-
-The companion firmware can be connected to via BLE, USB or WiFi depending on the firmware type you flashed.
-
-- Web: https://app.meshcore.nz
-- Android: https://play.google.com/store/apps/details?id=com.liamcottle.meshcore.android
-- iOS: https://apps.apple.com/us/app/meshcore/id6742354151?platform=iphone
-- NodeJS: https://github.com/liamcottle/meshcore.js
-- Python: https://github.com/fdlamotte/meshcore-cli
-
-**Repeater and Room Server Firmware**
-
-The repeater and room server firmwares can be setup via USB in the web config tool.
-
-- https://config.meshcore.io
-
-They can also be managed via LoRa in the mobile app by using the Remote Management feature.
-
-## 🛠 Hardware Compatibility
-
-MeshCore is designed for devices listed in the [MeshCore Flasher](https://meshcore.io/flasher)
-
-## 📜 License
-
-MeshCore is open-source software released under the MIT License. You are free to use, modify, and distribute it for personal and commercial projects.
-
-## Contributing
-
-Please submit PR's using 'dev' as the base branch!
-For minor changes just submit your PR and we'll try to review it, but for anything more 'impactful' please open an Issue first and start a discussion. Is better to sound out what it is you want to achieve first, and try to come to a consensus on what the best approach is, especially when it impacts the structure or architecture of this codebase.
-
-Here are some general principals you should try to adhere to:
-* Keep it simple. Please, don't think like a high-level lang programmer. Think embedded, and keep code concise, without any unnecessary layers.
-* No dynamic memory allocation, except during setup/begin functions.
-* Use the same brace and indenting style that's in the core source modules. (A .clang-format is prob going to be added soon, but please do NOT retroactively re-format existing code. This just creates unnecessary diffs that make finding problems harder)
-
-Help us prioritize! Please react with thumbs-up to issues/PRs you care about most. We look at reaction counts when planning work.
-
-## Road-Map / To-Do
-
-There are a number of fairly major features in the pipeline, with no particular time-frames attached yet. In very rough chronological order:
-- [X] Companion radio: UI redesign
-- [X] Repeater + Room Server: add ACL's (like Sensor Node has)
-- [X] Standardise Bridge mode for repeaters
-- [ ] Repeater/Bridge: Standardise the Transport Codes for zoning/filtering
-- [X] Core + Repeater: enhanced zero-hop neighbour discovery
-- [ ] Core: round-trip manual path support
-- [ ] Companion + Apps: support for multiple sub-meshes (and 'off-grid' client repeat mode)
-- [ ] Core + Apps: support for LZW message compression
-- [ ] Core: dynamic CR (Coding Rate) for weak vs strong hops
-- [ ] Core: new framework for hosting multiple virtual nodes on one physical device
-- [ ] V2 protocol spec: discussion and consensus around V2 packet protocol, including path hashes, new encryption specs, etc
-
-## 📞 Get Support
-
-- Report bugs and request features on the [GitHub Issues](https://github.com/ripplebiz/MeshCore/issues) page.
-- Find additional guides and components on [my site](https://buymeacoffee.com/ripplebiz).
-- Join [MeshCore Discord](https://discord.gg/BMwCtwHj5V) to chat with the developers and get help from the community.
+#### Seeed XIAO S3 WIO
+* Firmware kompiliert fehlerfrei und funktioniert
+* Der USR-Button auf der LoRa-Platine kann mit "readpin 21" ausgelesen werden

README_old.md

@@ -0,0 +1,135 @@
+
+## About MeshCore-Evo
+
+This is a friendly fork of the MeshCore project. 
+Its aim is to provide repeater firmwares with a few additional pending upstream PRs/improvements (i.e. PRs/improvements that are available to the MeshCore project but have not yet been merged in the upstream repo or PRs that might never be merged upstream for some reason).
+These changes are intended to help mitigating challenges in big or dense meshes, e.g.:
+
+- Dealing with flood advert traffic
+- improving `denyf *` handling
+
+This list might change any time.
+Refer to the [release notes](https://github.com/mattzzw/MeshCore-Evo/releases) for an up-to-date list of the applied changes.
+
+
+
+## About MeshCore
+
+MeshCore is a lightweight, portable C++ library that enables multi-hop packet routing for embedded projects using LoRa and other packet radios. It is designed for developers who want to create resilient, decentralized communication networks that work without the internet.
+
+## 🔍 What is MeshCore?
+
+MeshCore now supports a range of LoRa devices, allowing for easy flashing without the need to compile firmware manually. Users can flash a pre-built binary using tools like Adafruit ESPTool and interact with the network through a serial console.
+MeshCore provides the ability to create wireless mesh networks, similar to Meshtastic and Reticulum but with a focus on lightweight multi-hop packet routing for embedded projects. Unlike Meshtastic, which is tailored for casual LoRa communication, or Reticulum, which offers advanced networking, MeshCore balances simplicity with scalability, making it ideal for custom embedded solutions., where devices (nodes) can communicate over long distances by relaying messages through intermediate nodes. This is especially useful in off-grid, emergency, or tactical situations where traditional communication infrastructure is unavailable.
+
+## ⚡ Key Features
+
+* Multi-Hop Packet Routing
+  * Devices can forward messages across multiple nodes, extending range beyond a single radio's reach.
+  * Supports up to a configurable number of hops to balance network efficiency and prevent excessive traffic.
+  * Nodes use fixed roles where "Companion" nodes are not repeating messages at all to prevent adverse routing paths from being used.
+* Supports LoRa Radios – Works with Heltec, RAK Wireless, and other LoRa-based hardware.
+* Decentralized & Resilient – No central server or internet required; the network is self-healing.
+* Low Power Consumption – Ideal for battery-powered or solar-powered devices.
+* Simple to Deploy – Pre-built example applications make it easy to get started.
+
+## 🎯 What Can You Use MeshCore For?
+
+* Off-Grid Communication: Stay connected even in remote areas.
+* Emergency Response & Disaster Recovery: Set up instant networks where infrastructure is down.
+* Outdoor Activities: Hiking, camping, and adventure racing communication.
+* Tactical & Security Applications: Military, law enforcement, and private security use cases.
+* IoT & Sensor Networks: Collect data from remote sensors and relay it back to a central location.
+
+## 🚀 How to Get Started
+
+- Watch the [MeshCore Intro Video](https://www.youtube.com/watch?v=t1qne8uJBAc) by Andy Kirby.
+- Watch the [MeshCore Technical Presentation](https://www.youtube.com/watch?v=OwmkVkZQTf4) by Liam Cottle.
+- Read through our [Frequently Asked Questions](./docs/faq.md) and [Documentation](https://docs.meshcore.io).
+- Flash the MeshCore firmware on a supported device.
+- Connect with a supported client.
+
+For developers;
+
+- Install [PlatformIO](https://docs.platformio.org) in [Visual Studio Code](https://code.visualstudio.com).
+- Clone and open the MeshCore repository in Visual Studio Code.
+- See the example applications you can modify and run:
+  - [Companion Radio](./examples/companion_radio) - For use with an external chat app, over BLE, USB or WiFi.
+  - [KISS Modem](./examples/kiss_modem) - Serial KISS protocol bridge for host applications. ([protocol docs](./docs/kiss_modem_protocol.md))
+  - [Simple Repeater](./examples/simple_repeater) - Extends network coverage by relaying messages.
+  - [Simple Room Server](./examples/simple_room_server) - A simple BBS server for shared Posts.
+  - [Simple Secure Chat](./examples/simple_secure_chat) - Secure terminal based text communication between devices.
+  - [Simple Sensor](./examples/simple_sensor) - Remote sensor node with telemetry and alerting.
+
+The Simple Secure Chat example can be interacted with through the Serial Monitor in Visual Studio Code, or with a Serial USB Terminal on Android.
+
+## ⚡️ MeshCore Flasher
+
+We have prebuilt firmware ready to flash on supported devices.
+
+- Launch https://meshcore.io/flasher
+- Select a supported device
+- Flash one of the firmware types:
+  - Companion, Repeater or Room Server
+- Once flashing is complete, you can connect with one of the MeshCore clients below.
+
+## 📱 MeshCore Clients
+
+**Companion Firmware**
+
+The companion firmware can be connected to via BLE, USB or WiFi depending on the firmware type you flashed.
+
+- Web: https://app.meshcore.nz
+- Android: https://play.google.com/store/apps/details?id=com.liamcottle.meshcore.android
+- iOS: https://apps.apple.com/us/app/meshcore/id6742354151?platform=iphone
+- NodeJS: https://github.com/liamcottle/meshcore.js
+- Python: https://github.com/fdlamotte/meshcore-cli
+
+**Repeater and Room Server Firmware**
+
+The repeater and room server firmwares can be setup via USB in the web config tool.
+
+- https://config.meshcore.io
+
+They can also be managed via LoRa in the mobile app by using the Remote Management feature.
+
+## 🛠 Hardware Compatibility
+
+MeshCore is designed for devices listed in the [MeshCore Flasher](https://meshcore.io/flasher)
+
+## 📜 License
+
+MeshCore is open-source software released under the MIT License. You are free to use, modify, and distribute it for personal and commercial projects.
+
+## Contributing
+
+Please submit PR's using 'dev' as the base branch!
+For minor changes just submit your PR and we'll try to review it, but for anything more 'impactful' please open an Issue first and start a discussion. Is better to sound out what it is you want to achieve first, and try to come to a consensus on what the best approach is, especially when it impacts the structure or architecture of this codebase.
+
+Here are some general principals you should try to adhere to:
+* Keep it simple. Please, don't think like a high-level lang programmer. Think embedded, and keep code concise, without any unnecessary layers.
+* No dynamic memory allocation, except during setup/begin functions.
+* Use the same brace and indenting style that's in the core source modules. (A .clang-format is prob going to be added soon, but please do NOT retroactively re-format existing code. This just creates unnecessary diffs that make finding problems harder)
+
+Help us prioritize! Please react with thumbs-up to issues/PRs you care about most. We look at reaction counts when planning work.
+
+## Road-Map / To-Do
+
+There are a number of fairly major features in the pipeline, with no particular time-frames attached yet. In very rough chronological order:
+- [X] Companion radio: UI redesign
+- [X] Repeater + Room Server: add ACL's (like Sensor Node has)
+- [X] Standardise Bridge mode for repeaters
+- [ ] Repeater/Bridge: Standardise the Transport Codes for zoning/filtering
+- [X] Core + Repeater: enhanced zero-hop neighbour discovery
+- [ ] Core: round-trip manual path support
+- [ ] Companion + Apps: support for multiple sub-meshes (and 'off-grid' client repeat mode)
+- [ ] Core + Apps: support for LZW message compression
+- [ ] Core: dynamic CR (Coding Rate) for weak vs strong hops
+- [ ] Core: new framework for hosting multiple virtual nodes on one physical device
+- [ ] V2 protocol spec: discussion and consensus around V2 packet protocol, including path hashes, new encryption specs, etc
+
+## 📞 Get Support
+
+- Report bugs and request features on the [GitHub Issues](https://github.com/ripplebiz/MeshCore/issues) page.
+- Find additional guides and components on [my site](https://buymeacoffee.com/ripplebiz).
+- Join [MeshCore Discord](https://meshcore.gg) to chat with the developers and get help from the community.

docs/faq.md

@@ -111,7 +111,6 @@ Anyone is able to build anything they like on top of MeshCore without paying any
 - MeshCore Firmware on GitHub: [https://github.com/meshcore-dev/MeshCore](https://github.com/meshcore-dev/MeshCore)
 - MeshCore Companion Web App: [https://app.meshcore.nz](https://app.meshcore.nz)
 - MeshCore Map: [https://map.meshcore.io](https://map.meshcore.io)
-- Andy Kirby's [MeshCore Intro Video](https://www.youtube.com/watch?v=t1qne8uJBAc)
 - Liam Cottle's [MeshCore Technical Presentation](https://www.youtube.com/watch?v=OwmkVkZQTf4)
 
 You need LoRa hardware devices to run MeshCore firmware as clients or server (repeater and room server).
@@ -194,7 +193,7 @@ Recently, as of October 2025, many regions have moved to the "narrow" setting, a
 
 After extensive testing, many regions have switched or about to switch over to BW62.5 and SF7, 8, or 9.  Narrower bandwidth setting and lower SF setting allow MeshCore's radio signals to fit between interference in the ISM band, provide for a lower noise floor, better SNR, and faster transmissions.
 
-If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on  the [#meshcore-app](https://discord.com/channels/1343693475589263471/1391681655911088241) channel on the [MeshCore Discord server ](https://discord.gg/cYtQNYCCRK) to let Liam Cottle know.
+If you have consensus from your community in your region to update your region's preset recommendation, please post your update request on  the [#meshcore-app](https://discord.com/channels/1343693475589263471/1391681655911088241) channel on the [MeshCore Discord server ](https://meshcore.gg) to let Liam Cottle know.
 
 
 
@@ -402,10 +401,7 @@ Another way to download map tiles is to use this Python script to get the tiles
 <https://github.com/fistulareffigy/MTD-Script>
 
 There is also a modified script that adds additional error handling and parallel downloads:
-<https://discord.com/channels/826570251612323860/1330643963501351004/1338775811548905572>
-
-UK map tiles are available separately from Andy Kirby on his discord server:
-<https://discord.com/channels/826570251612323860/1330643963501351004/1331346597367386224>
+<https://github.com/TheBestJohn/MTD-Script>
 
 ### 4.8. Q: Where do the map tiles go?
 Once you have the tiles downloaded, copy the `\tiles` folder to the root of your T-Deck's SD card.
@@ -526,7 +522,7 @@ The third character is the capital letter 'O', not zero `0`
 - Firmware repo: https://github.com/meshcore-dev/MeshCore
 
 ### 5.8. Q: How can I support MeshCore?
-**A:** Provide your honest feedback on GitHub and on [MeshCore Discord server](https://discord.gg/BMwCtwHj5V). Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at <https://buymeacoffee.com/ripplebiz>.
+**A:** Provide your honest feedback on GitHub and on [MeshCore Discord server](https://meshcore.gg). Spread the word of MeshCore to your friends and communities; help them get started with MeshCore. Support Scott's MeshCore development at <https://buymeacoffee.com/ripplebiz>.
 
 Support Liam Cottle's smartphone client development by unlocking the server administration wait gate with in-app purchase
 
@@ -563,10 +559,6 @@ pio run -e RAK_4631_Repeater
 ```
 then you'll find `firmware.zip` in `.pio/build/RAK_4631_Repeater`
 
-Andy also has a video on how to build using VS Code:
-*How to build and flash Meshcore repeater firmware | Heltec V3*
-<https://www.youtube.com/watch?v=WJvg6dt13hk> *(Link referenced in the Discord post)*
-
 ### 5.10. Q: Are there other MeshCore related open source projects?
 
 **A:** [Liam Cottle](https://liamcottle.net)'s MeshCore web client and MeshCore Javascript library are open source under MIT license.

examples/simple_sensor/SensorMesh.cpp

@@ -3,16 +3,16 @@
 /* ------------------------------ Config -------------------------------- */
 
 #ifndef LORA_FREQ
-  #define LORA_FREQ   915.0
+  #define LORA_FREQ   869.618
 #endif
 #ifndef LORA_BW
-  #define LORA_BW     250
+  #define LORA_BW     62.5
 #endif
 #ifndef LORA_SF
-  #define LORA_SF     10
+  #define LORA_SF     8
 #endif
 #ifndef LORA_CR
-  #define LORA_CR      5
+  #define LORA_CR      8
 #endif
 #ifndef LORA_TX_POWER
   #define LORA_TX_POWER  20
@@ -443,7 +443,24 @@ void SensorMesh::handleCommand(uint32_t sender_timestamp, char* command, char* r
       board.setGpio(val);
     }
     sprintf(reply, "%x", board.getGpio());
-  } else{
+  } else if (memcmp(command, "readpin ", 8) == 0) {
+    uint8_t pin = atoi(&command[8]); // Pin-Nummer extrahieren
+    if (pin < 32) {
+        bool pin_state = board.readPin(pin); // Zustand des Pins auslesen
+        sprintf(reply, "%s", pin_state ? "ON" : "OFF");
+    } else {
+        strcpy(reply, "Err - invalid pin");
+    }
+  } else if (memcmp(command, "bin", 3) == 0) {
+    uint32_t gpio_state = board.getGpio(); // 32-Bit-GPIO-Zustand auslesen
+    // Initialisiere reply mit Nullen, um sicherzustellen, dass es sauber ist
+    memset(reply, 0, 33); // 32 Zeichen + Null-Terminator
+    // Binärstring erstellen (Bit 31 bis Bit 0)
+    for (int i = 0; i < 32; i++) {
+        reply[31 - i] = (gpio_state & (1 << i)) ? '1' : '0';
+    }
+    reply[32] = '\0'; // Null-Terminator explizit setzen
+  } else {
     _cli.handleCommand(sender_timestamp, command, reply);  // common CLI commands
   }
 }

examples/simple_sensor/SensorMesh.h

@@ -38,7 +38,7 @@
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.14.1"
+  #define FIRMWARE_VERSION   "v1.15.1"
 #endif
 
 #define FIRMWARE_ROLE "sensor"

examples/simple_sensor/main.cpp

@@ -61,7 +61,7 @@ void setup() {
 #ifdef DISPLAY_CLASS
   if (display.begin()) {
     display.startFrame();
-    display.print("Please wait...");
+    display.print("AOI FW! Bitte warten...");
     display.endFrame();
   }
 #endif
@@ -102,6 +102,10 @@ void setup() {
 
   command[0] = 0;
 
+  // Konfiguriere GPIO 15 als Eingang mit Pull-Up
+  pinMode(15, INPUT_PULLUP);
+  pinMode(16, INPUT_PULLUP);
+
   sensors.begin();
 
   the_mesh.begin(fs);

src/helpers/ESP32Board.h

@@ -48,6 +48,25 @@ public:
   #endif
   }
 
+  // Implement an actual getGpio for ESP32 boards
+  uint32_t getGpio() override {
+    uint32_t state = 0;
+    for (int pin = 0; pin < 32; pin++) {
+        if (digitalRead(pin) == HIGH) {
+            state |= (1 << pin);
+        }
+    }
+    return state;
+  }
+
+  // Read the state of a single pin
+  public:
+    // Liest den Zustand eines einzelnen Pins (0-31)
+    bool readPin(uint8_t pin) {
+        if (pin >= 32) return false; // Ungültiger Pin
+        return digitalRead(pin) == HIGH;
+    }
+
   // Temperature from ESP32 MCU
   float getMCUTemperature() override {
     uint32_t raw = 0;

variants/lilygo_teth_elite/TETHEliteBoard.h

@@ -0,0 +1,10 @@
+#pragma once
+
+#include <helpers/ESP32Board.h>
+
+class TETHEliteBoard : public ESP32Board {
+public:
+  const char* getManufacturerName() const override {
+    return "LilyGO T-ETH Elite";
+  }
+};

variants/lilygo_teth_elite/platformio.ini

@@ -0,0 +1,99 @@
+[LilyGo_TETH_Elite_sx1262]
+extends = esp32_base
+board = esp32s3box
+board_build.partitions = default_16MB.csv
+board_upload.flash_size = 16MB
+build_flags =
+  ${esp32_base.build_flags}
+  -I variants/lilygo_teth_elite
+  -D BOARD_HAS_PSRAM
+  -D LILYGO_TETH_ELITE
+  -D LILYGO_T_ETH_ELITE_ESP32S3
+  -D ARDUINO_USB_CDC_ON_BOOT=1
+  -D P_LORA_DIO_1=8
+  -D P_LORA_NSS=40
+  -D P_LORA_RESET=46
+  -D P_LORA_BUSY=16
+  -D P_LORA_SCLK=10
+  -D P_LORA_MISO=9
+  -D P_LORA_MOSI=11
+  -D P_LORA_TX_LED=38
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D USE_SX1262
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=8
+  -D SX126X_RX_BOOSTED_GAIN=1
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/lilygo_teth_elite>
+lib_deps =
+  ${esp32_base.lib_deps}
+
+[env:LilyGo_TETH_Elite_sx1262_repeater]
+extends = LilyGo_TETH_Elite_sx1262
+build_flags =
+  ${LilyGo_TETH_Elite_sx1262.build_flags}
+  -D ADVERT_NAME='"T-ETH Elite Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${LilyGo_TETH_Elite_sx1262.build_src_filter}
+  +<../examples/simple_repeater>
+lib_deps =
+  ${LilyGo_TETH_Elite_sx1262.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:LilyGo_TETH_Elite_sx1262_room_server]
+extends = LilyGo_TETH_Elite_sx1262
+build_flags =
+  ${LilyGo_TETH_Elite_sx1262.build_flags}
+  -D ADVERT_NAME='"T-ETH Elite Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${LilyGo_TETH_Elite_sx1262.build_src_filter}
+  +<../examples/simple_room_server>
+lib_deps =
+  ${LilyGo_TETH_Elite_sx1262.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:LilyGo_TETH_Elite_sx1262_companion_radio_usb]
+extends = LilyGo_TETH_Elite_sx1262
+build_flags =
+  ${LilyGo_TETH_Elite_sx1262.build_flags}
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${LilyGo_TETH_Elite_sx1262.build_src_filter}
+  +<../examples/companion_radio/*.cpp>
+lib_deps =
+  ${LilyGo_TETH_Elite_sx1262.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:LilyGo_TETH_Elite_sx1262_companion_radio_ble]
+extends = LilyGo_TETH_Elite_sx1262
+build_flags =
+  ${LilyGo_TETH_Elite_sx1262.build_flags}
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${LilyGo_TETH_Elite_sx1262.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+lib_deps =
+  ${LilyGo_TETH_Elite_sx1262.lib_deps}
+  densaugeo/base64 @ ~1.4.0

variants/lilygo_teth_elite/target.cpp

@@ -0,0 +1,43 @@
+#include <Arduino.h>
+#include "target.h"
+
+TETHEliteBoard board;
+
+static SPIClass spi(HSPI);
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+SensorManager sensors;
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+
+  return radio.std_init(&spi);
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(int8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);
+}

variants/lilygo_teth_elite/target.h

@@ -0,0 +1,20 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/SensorManager.h>
+#include "TETHEliteBoard.h"
+
+extern TETHEliteBoard board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern SensorManager sensors;
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(int8_t dbm);
+mesh::LocalIdentity radio_new_identity();