A battery profile describes a battery model: the charge and discharge limit
maps over temperature and SoC, the charge and discharge efficiency curves
over C-rate, the technical SoC bounds, the hard temperature cutoffs and,
for a model, its nominal capacity and power limits. EOS packages the
generic profile generic-lfp; users add their own profiles.
A battery or electric vehicle selects its profile by battery_profile and
describes how the installation differs from it in profile_adjustment
(capacity, power limits of the installation, periodic full charge). The
effective values are resolved from both at the measured operating point
(temperature, SoC, power) and shown as effective_* fields.
The GENETIC simulation uses the limits and efficiencies of the profile over
SoC, with precomputed tables as a fast path; GENETIC0 gets the values at the
operating point. Optimization parameters are always valid: a battery whose
profile is missing, unreadable or invalid uses the packaged generic-lfp
profile, and the former defaults only if that is not usable either; each is
logged as error, and an optimization run is never cancelled because of a
battery.
Additional changes
- Add a generic device profile store: user and packaged profiles, atomic
saves, compiled profiles cached per file and checked again at most once a
second, plain file names as profile names ('schema' is reserved). On
Windows, a save or read that collides with the other is retried briefly.
- Add the REST API /v1/profile to list the profile kinds and to list, read
(document and JSON schema), save and delete profiles.
- Check the hard temperature cutoffs on the exact temperature.
- Resolve inhibited charging or discharging to a power of 0, e.g. for a cold
battery; give GENETIC0 its own discharge limit for that.
- Limit generic profiles without own power limits to the former 5000 W.
- Accept only the implemented units; current limits need the nominal
voltage.
- Migrate legacy battery settings into the profile adjustment, keep the
former charge power limit as discharge limit (also for a Home Assistant
entity on it) and report dropped efficiencies as errors.
- Limit GENETIC battery discharge by the discharge power.
- Allow battery profile lookups while the configuration is created.
- Resolve a battery once per configuration dump.
- Package the bundled profiles, document battery profiles and regenerate
the configuration and OpenAPI documentation.
- Ignore the report PDFs written by the visualization tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Assisted-by: Claude Code (claude-opus-5-5)
Forecast.Solar supplies instantaneous power with irregular sunrise/sunset timestamps. GENETIC interprets stored values as interval averages and infers cadence from the shortest gap, so these samples create artificial coverage gaps. The prediction list API also averages away the sunset zero before interpolating, producing positive nighttime PV.
Integrate each roof plane's piecewise-linear power curve into UTC-contiguous 15-minute interval-average W before summing planes. Both hourly and quarter-hour GENETIC slots then consume the same normalized data as the prediction API, with exactly one downstream W-to-Wh conversion. Explicit sunrise/sunset zero boundaries establish the adjacent night within each forecast day. Daylight gaps longer than an hour, invalid power, absent planes and unavailable forecast days remain missing; the strict GENETIC coverage check stays in place.
Refreshes replace the current forecast and remove stale tails. Because cadence detection also sees historical records, the first refresh clears legacy forecasts containing non-aligned timestamps, including their history. Later refreshes retain normalized history. This upgrade behavior is documented.
Forecast validation errors now identify the first invalid interval and the number of invalid slots.
Add a configurable filename linter to enforce naming conventions and an AGENTS.md to guide
AI coding agents in following project conventions.
The guidelines steer code generation; the linter independently verifies filename compliance.
Together, they improve consistency and reduce unnecessary files and review effort.
Conflicting file names were renamed.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Bobby NoelteandClaude Opus 5.5
NormannandGitHub