mirror of
https://github.com/Akkudoktor-EOS/EOS.git
synced 2026-11-13 09:13:30 +01:00
faf37abfe7b103e0e2f6da5ac20c248b3eae8522
26
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  Bobby NoelteandClaude Opus 5.5
|
faf37abfe7 |
feat(devices): add inverter profiles
An inverter profile describes the technical data of an inverter model: its nominal AC power, the DC→AC and AC→DC efficiency curves over the load fraction (AC power relative to the nominal power), the AC charge power limit of the model, whether that limit also limits PV charging, and an optional power derating over the ambient temperature. Curves are read linearly and clamped at their ends, so every lookup yields a value. The packaged profile generic-hybrid has typical hybrid inverter efficiencies, no nominal power (the inverter device has to provide it) and full power up to 45 degC. Inverter settings name their profile (inverter_profile, default generic-hybrid) and hold the differences of the unit in profile_adjustment: nominal_power_w (replaces the profile value, required for a generic profile), max_power_w and max_ac_charge_power_w (installation limits that can only lower; an AC charge limit of 0 disables AC charging). The effective parameters are resolved at the ambient temperature of the inverter, given by the new measurement key <device_id>-temperature-degc (45 degC without a fresh value); the power derating lowers the maximum power and the AC charge limit. Optimization parameters are always valid: the GENETIC and GENETIC0 parameter preparation resolve the inverter with resolve_current_operating_parameters_or_defaults, which never raises. An unusable profile gives the generic-hybrid profile, a missing nominal power the fallback of 10000 W, an inverter derated to zero power the parameters at 45 degC, and no usable profile at all the profile adjustment with constant efficiency; each is logged as error. The GENETIC inverter takes the AC→DC efficiency curve of the profile, solved exactly on each linear piece of the curve (about 2 % longer runs); GENETIC0 keeps constant efficiencies and no longer replaces the configured inverters with the demo inverter; a battery, electric vehicle or inverter that cannot be prepared is left out of the GENETIC0 run, never replaced by a demo device. Configurations migrate: max_power_w becomes profile_adjustment.nominal_power_w, max_ac_charge_power_w moves into the adjustment, an ac_to_dc_efficiency of 0 keeps AC charging disabled, and the efficiency fields are dropped with an error log, as for batteries, so the profile efficiencies apply. Home Assistant config paths follow. Additional changes - Move the curve algorithms of the battery profile into profilecurve, so battery and inverter profiles share them; the battery profile keeps its document format and classes. - Move ProfileBaseModel, the strict base of profile documents, into profilestore. - Serve inverter profiles through the profile REST API. Refuse to delete a profile that a configured device uses and that has no packaged profile to revert to (409). - Share the measurement access of the device settings in devicemeasurement. - Rename check_battery_profiles to check_device_profiles; the device profile check at configuration setup covers inverters, too. - Document inverter profiles, their configuration, defaults and sharing; regenerate the configuration and OpenAPI documentation. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Assisted-by: Claude Code (claude-opus-5-5) |
||
|
Bobby NoelteandClaude Opus 5.5
|
e255f987bf |
feat(devices): add battery profiles
A battery profile describes a battery model: the charge and discharge limit
maps over temperature and SoC, the charge and discharge efficiency curves
over C-rate, the technical SoC bounds, the hard temperature cutoffs and,
for a model, its nominal capacity and power limits. EOS packages the
generic profile generic-lfp; users add their own profiles.
A battery or electric vehicle selects its profile by battery_profile and
describes how the installation differs from it in profile_adjustment
(capacity, power limits of the installation, periodic full charge). The
effective values are resolved from both at the measured operating point
(temperature, SoC, power) and shown as effective_* fields.
The GENETIC simulation uses the limits and efficiencies of the profile over
SoC, with precomputed tables as a fast path; GENETIC0 gets the values at the
operating point. Optimization parameters are always valid: a battery whose
profile is missing, unreadable or invalid uses the packaged generic-lfp
profile, and the former defaults only if that is not usable either; each is
logged as error, and an optimization run is never cancelled because of a
battery.
Additional changes
- Add a generic device profile store: user and packaged profiles, atomic
saves, compiled profiles cached per file and checked again at most once a
second, plain file names as profile names ('schema' is reserved). On
Windows, a save or read that collides with the other is retried briefly.
- Add the REST API /v1/profile to list the profile kinds and to list, read
(document and JSON schema), save and delete profiles.
- Check the hard temperature cutoffs on the exact temperature.
- Resolve inhibited charging or discharging to a power of 0, e.g. for a cold
battery; give GENETIC0 its own discharge limit for that.
- Limit generic profiles without own power limits to the former 5000 W.
- Accept only the implemented units; current limits need the nominal
voltage.
- Migrate legacy battery settings into the profile adjustment, keep the
former charge power limit as discharge limit (also for a Home Assistant
entity on it) and report dropped efficiencies as errors.
- Limit GENETIC battery discharge by the discharge power.
- Allow battery profile lookups while the configuration is created.
- Resolve a battery once per configuration dump.
- Package the bundled profiles, document battery profiles and regenerate
the configuration and OpenAPI documentation.
- Ignore the report PDFs written by the visualization tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Assisted-by: Claude Code (claude-opus-5-5)
|
||
  
|
8224c64654 |
feat: integrate device and runtime configuration foundation on main (#1328)
* feat: adapt configuration for multi optimization algorithms Decouple configuration from optimization algorithm parameters. Add to_[algorithm]_param() methods to the configuration that derive optimization algorithm specific parameters from the configuration. Add x-scope tags to the configuration options that describe for which specific algorithms the configuration option is for. The whole device settings are restructured. There are now general settings for the device classes with the afore mentioned to_[algorithm]_param() methods. The general device settings got their own directory `devices/settings`. By this the parameter class also does not have to be a pydantic model which can be used for future optimization/ simulations speed up. Also the parameter class for a device is now part of the device module. This better decouples and also is the natural place for parameters of a device. Besides this feature there are also fixes and improvements: * feat: extend home appliance time window settings and simulation Home appliance can now be configured for multiple runs with per-cycle allowed time windows. The number of remaining cycles to plan is determined at runtime by reading the ``cycles_completed_measurement_key`` from the measurement store. * feat: specialiced CycleTimeWindowSequence for time window sequences Sequence of time windows associated to cycles. This model specializes ``ValueTimeWindowSequence`` so that the ``value`` field of each ``ValueTimeWindow`` encodes the **cycle index** (0-based integer) the window belongs to. Typical use: an appliance that must run ``n`` times per day, each run constrained to a distinct time window. Assign ``value=0`` to windows for the first cycle, ``value=1`` for the second, and so on. Multiple windows may share the same cycle index (their allowed regions are unioned). Windows with ``value=None`` are silently ignored by all cycle-aware methods. * fix: Make test_configmigrate also regard the _ANY_SENTENIEL in key values * chore: Make devices configurations a map instead of a list This makes config paths stable regardless of declaration order and lets each device settings class build its own config path from ``self.device_id`` without needing an external index. Tests are adapted likewise. Devices configurations are automatically migrated from lists to maps. * chore: rename levelized_cost_of_storage_kwh to levelized_cost_of_storage_amt kwh This better fits in the naming scheme and also makes clear the costs are money. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> * fix: runtime config update ignored by config file Runtime settings were handed back to pydantic-settings as init settings, which rank below the config file and the environment. Any key already present in EOS.config.json or in the environment silently discarded the update, so a bulk PUT /v1/config returned 200 without applying anything, while the granular PUT /v1/config/{path} endpoint kept working. Add a dedicated runtime settings source ranked directly below the command line arguments and record granular updates there as well, so both endpoints share one store that survives re-evaluation of the settings sources. Environment variables keep precedence over the config file for all keys that were not set at runtime. Also repairs revert_settings() and update(), which passed their data through the same init settings. Closes #1303 * fix: env vars ignored on first config build ConfigEOS.__init__ passed self as first positional argument to _setup, which forwards it to pydantic_settings.BaseSettings.__init__. Its first positional parameter is _case_sensitive, so the environment source matched the upper case variable names against the lower case field names and returned nothing. Environment settings only took effect after the next configuration setup. * docs: changelog for config priority fixes * fix(config): preserve device identities and storage costs during migration * fix(devices): preserve charge-rate typing and public import compatibility * ruff format fix * fix(config): satisfy typed device conversion and migration contracts * docs(config): refresh validated configuration prerequisite schemas --------- Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> Co-authored-by: Bobby Noelte <b0661n0e17e@gmail.com> Co-authored-by: r0b2g1t <r0b2g1t@users.noreply.github.com> |
||
 
|
1abdd345c4 |
fix: unify mypy environments for local checks and CI (#1291)
The isolated pre-commit mypy hook previously omitted runtime type information that make mypy used, hiding errors involving dependencies such as Pydantic and Pendulum. Makefile, pre-commit and CI now run the same full-project typing policy in the development environment defined by uv.lock. - Use uv run --locked --exact --extra dev and the same mypy arguments for Makefile and the local hook. Check all of src and tests, including on configuration-only changes. - Pin Python 3.13 for local development and the pre-commit CI job, and install the locked pre-commit version in CI. - Disable incremental analysis because existing Pendulum cache state changes mypy 2.3.1 diagnostics. Document the policy, the performance tradeoff and the existing typing debt. - Add a regression test that exercises Makefile, the hook and the CI command in a temporary project, accepting valid dependency types and detecting deliberate Pydantic/Pendulum assignment errors. Resolve the newly detected mypy diagnostics. - Enable the numpydantic and Pydantic mypy plugins, retaining strict Pydantic constructor typing with init_typed = true. Validate raw/coercible payloads through model_validate. - Propagate concrete record, provider and time-window types through generic collections, factories and lookup methods. Preserve runtime field inspection and generated time-window documentation. - Align Pendulum annotations with actual factory/arithmetic results while retaining Pydantic validation adapters at runtime. Correct optional values, array boundaries, REST handlers and plotting interfaces. - Add pinned scipy-stubs and types-psutil, update uv.lock, and supply the plugins' dependencies. - Add runtime regression coverage for validated path defaults, normalized time-series metadata, generic field inspection, invalid timestamps and unsupported provider imports. Runtime and compatibility details: - Validate path defaults as Path objects while retaining raw string defaults needed by migration serialization with exclude_defaults. - Normalize feed-in tariff lists and default charge rates to NumPy arrays; reject missing timestamps/uninitialized values explicitly. Importing into a provider without import support returns HTTP 400. - Public JSON schemas and OpenAPI structure match main (excluding the generated version). Signed-off-by: dr-dimitry Signed-off-by: dr-dimitry Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> Co-authored-by: dr-dimitri <87113560+dr-dimitri@users.noreply.github.com> Co-authored-by: Normann <github@koldrack.com> |
||
 
|
6933b33542 |
feat: rename genetic optimization API fields to English (#675)
Bump Version / Bump Version Workflow (push) Has been cancelled
CodeQL Advanced / Analyze (actions) (push) Has been cancelled
CodeQL Advanced / Analyze (python) (push) Has been cancelled
docker-build / platform-excludes (push) Has been cancelled
pre-commit / pre-commit (push) Has been cancelled
Run Pytest on Pull Request / test (push) Has been cancelled
docker-build / build (push) Has been cancelled
docker-build / merge (push) Has been cancelled
Close stale pull requests/issues / Find Stale issues and PRs (push) Has been cancelled
Rename the German field names of the genetic optimization API to English with full backward compatibility: - English names are canonical and documented in the OpenAPI schema; the German names are still accepted on input via validation aliases and re-emitted in responses as deprecated computed fields - fix visualization receiving the raw German-keyed simulation dict (KeyError: load_wh_per_hour) - rename internal German identifiers (optimize_ems, total_balance, battery_residual_value, self_consumption, extra_data keys) - use amount instead of currency/euro in chart labels and schema descriptions; document currency handling (whole currency units, never cents) in the API description - regenerate openapi.json and generated docs Co-authored-by: Tobias Welz <tobias.wizneteu@gmail.com> |
||
|
Bobby NoelteandGitHub
|
cf477d91a3 |
feat: add fixed electricity prediction with time window support (#930)
Bump Version / Bump Version Workflow (push) Has been cancelled
docker-build / platform-excludes (push) Has been cancelled
docker-build / build (push) Has been cancelled
docker-build / merge (push) Has been cancelled
pre-commit / pre-commit (push) Has been cancelled
Run Pytest on Pull Request / test (push) Has been cancelled
Close stale pull requests/issues / Find Stale issues and PRs (push) Has been cancelled
Add a fixed electricity prediction that supports prices per time window.
The time windows may flexible be defined by day or date.
The prediction documentation is updated to also cover the ElecPriceFixed
provider.
The feature includes several changes that are not directly related to the
electricity price prediction implementation but are necessary to keep
EOS running properly and to test and document the changes.
* feat: add value time windows
Add time windows with an associated float value.
* feat: harden eos measurements endpoints error detection and reporting
Cover more errors that may be raised during endpoint access. Report the
errors including trace information to ease debugging.
* feat: extend server configuration to cover all arguments
Make the argument controlled options also available in server configuration.
* fix: eos config configuration by cli arguments
Move the command line argument handling to config eos so that it is
excuted whenever eos config is rebuild or reset.
* chore: extend measurement endpoint system test
* chore: refactor time windows
Move time windows to configabc as they are only used in configurations.
Also move all tests to test_configabc.
* chore: provide config update errors in eosdash with summarized error text
If there is an update error provide the error text as a summary. On click
provide the full error text.
* chore: force eosdash ip address and port in makefile dev run
Ensure eosdash ip address and port are correctly set for development runs.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
|
||
 Christopher NadlerandGitHub
|
3ccc25d731 |
Adds inverter AC/DC efficiency and break-even penalty (#888)
Bump Version / Bump Version Workflow (push) Has been cancelled
docker-build / platform-excludes (push) Has been cancelled
docker-build / build (push) Has been cancelled
docker-build / merge (push) Has been cancelled
pre-commit / pre-commit (push) Has been cancelled
Run Pytest on Pull Request / test (push) Has been cancelled
* feat: add inverter AC/DC efficiency and break-even penalty * test: update tests/test_geneticoptimize.py with new ac_charge_break_even parameter * docs: update documentation * chore: update version numbers in configuration files to v0.2.0.dev2602272006923535 |
||
|
Bobby NoelteandGitHub
|
6498c7dc32 |
Add database support for measurements and historic prediction data. (#848)
The database supports backend selection, compression, incremental data load, automatic data saving to storage, automatic vaccum and compaction. Make SQLite3 and LMDB database backends available. Update tests for new interface conventions regarding data sequences, data containers, data providers. This includes the measurements provider and the prediction providers. Add database documentation. The fix includes several bug fixes that are not directly related to the database implementation but are necessary to keep EOS running properly and to test and document the changes. * fix: config eos test setup Make the config_eos fixture generate a new instance of the config_eos singleton. Use correct env names to setup data folder path. * fix: startup with no config Make cache and measurements complain about missing data path configuration but do not bail out. * fix: soc data preparation and usage for genetic optimization. Search for soc measurments 48 hours around the optimization start time. Only clamp soc to maximum in battery device simulation. * fix: dashboard bailout on zero value solution display Do not use zero values to calculate the chart values adjustment for display. * fix: openapi generation script Make the script also replace data_folder_path and data_output_path to hide real (test) environment pathes. * feat: add make repeated task function make_repeated_task allows to wrap a function to be repeated cyclically. * chore: removed index based data sequence access Index based data sequence access does not make sense as the sequence can be backed by the database. The sequence is now purely time series data. * chore: refactor eos startup to avoid module import startup Avoid module import initialisation expecially of the EOS configuration. Config mutation, singleton initialization, logging setup, argparse parsing, background task definitions depending on config and environment-dependent behavior is now done at function startup. * chore: introduce retention manager A single long-running background task that owns the scheduling of all periodic server-maintenance jobs (cache cleanup, DB autosave, …) * chore: canonicalize timezone name for UTC Timezone names that are semantically identical to UTC are canonicalized to UTC. * chore: extend config file migration for default value handling Extend the config file migration handling values None or nonexisting values that will invoke a default value generation in the new config file. Also adapt test to handle this situation. * chore: extend datetime util test cases * chore: make version test check for untracked files Check for files that are not tracked by git. Version calculation will be wrong if these files will not be commited. * chore: bump pandas to 3.0.0 Pandas 3.0 now performs inference on the appropriate resolution (a.k.a. unit) for the output dtype which may become datetime64[us] (before it was ns). Also numeric dtype detection is now more strict which needs a different detection for numerics. * chore: bump pydantic-settings to 2.12.0 pydantic-settings 2.12.0 under pytest creates a different behaviour. The tests were adapted and a workaround was introduced. Also ConfigEOS was adapted to allow for fine grain initialization control to be able to switch off certain settings such as file settings during test. * chore: remove sci learn kit from dependencies The sci learn kit is not strictly necessary as long as we have scipy. * chore: add documentation mode guarding for sphinx autosummary Sphinx autosummary excecutes functions. Prevent exceptions in case of pure doc mode. * chore: adapt docker-build CI workflow to stricter GitHub handling Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> |
||
|
Bobby NoelteandGitHub
|
58d70e417b |
feat: add Home Assistant and NodeRED adapters (#764)
Adapters for Home Assistant and NodeRED integration are added. Akkudoktor-EOS can now be run as Home Assistant add-on and standalone. As Home Assistant add-on EOS uses ingress to fully integrate the EOSdash dashboard in Home Assistant. The fix includes several bug fixes that are not directly related to the adapter implementation but are necessary to keep EOS running properly and to test and document the changes. * fix: development version scheme The development versioning scheme is adaptet to fit to docker and home assistant expectations. The new scheme is x.y.z and x.y.z.dev<hash>. Hash is only digits as expected by home assistant. Development version is appended by .dev as expected by docker. * fix: use mean value in interval on resampling for array When downsampling data use the mean value of all values within the new sampling interval. * fix: default battery ev soc and appliance wh Make the genetic simulation return default values for the battery SoC, electric vehicle SoC and appliance load if these assets are not used. * fix: import json string Strip outer quotes from JSON strings on import to be compliant to json.loads() expectation. * fix: default interval definition for import data Default interval must be defined in lowercase human definition to be accepted by pendulum. * fix: clearoutside schema change * feat: add adapters for integrations Adapters for Home Assistant and NodeRED integration are added. Akkudoktor-EOS can now be run as Home Assistant add-on and standalone. As Home Assistant add-on EOS uses ingress to fully integrate the EOSdash dashboard in Home Assistant. * feat: allow eos to be started with root permissions and drop priviledges Home assistant starts all add-ons with root permissions. Eos now drops root permissions if an applicable user is defined by paramter --run_as_user. The docker image defines the user eos to be used. * feat: make eos supervise and monitor EOSdash Eos now not only starts EOSdash but also monitors EOSdash during runtime and restarts EOSdash on fault. EOSdash logging is captured by EOS and forwarded to the EOS log to provide better visibility. * feat: add duration to string conversion Make to_duration to also return the duration as string on request. * chore: Use info logging to report missing optimization parameters In parameter preparation for automatic optimization an error was logged for missing paramters. Log is now down using the info level. * chore: make EOSdash use the EOS data directory for file import/ export EOSdash use the EOS data directory for file import/ export by default. This allows to use the configuration import/ export function also within docker images. * chore: improve EOSdash config tab display Improve display of JSON code and add more forms for config value update. * chore: make docker image file system layout similar to home assistant Only use /data directory for persistent data. This is handled as a docker volume. The /data volume is mapped to ~/.local/share/net.akkudoktor.eos if using docker compose. * chore: add home assistant add-on development environment Add VSCode devcontainer and task definition for home assistant add-on development. * chore: improve documentation |
||
|
Bobby NoelteandGitHub
|
e7b43782a4 |
fix: pydantic extra keywords deprecated (#753)
Pydantic deprecates using extra keyword arguments on Field. Used json_schema_extra instead. Deprecated in Pydantic V2.0 to be removed in V3.0. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> |
||
|
Bobby NoelteandGitHub
|
3599088dce |
chore: eosdash improve plan display (#739)
docker-build / platform-excludes (push) Has been cancelled
docker-build / build (push) Has been cancelled
docker-build / merge (push) Has been cancelled
pre-commit / pre-commit (push) Has been cancelled
Run Pytest on Pull Request / test (push) Has been cancelled
Close stale pull requests/issues / Find Stale issues and PRs (push) Has been cancelled
* chore: improve plan solution display Add genetic optimization results to general solution provided by EOSdash plan display. Add total results. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> * fix: genetic battery and home appliance device simulation Fix genetic solution to make ac_charge, dc_charge, discharge, ev_charge or home appliance start time reflect what the simulation was doing. Sometimes the simulation decided to charge less or to start the appliance at another time and this was not brought back to e.g. ac_charge. Make home appliance simulation activate time window for the next day if it can not be run today. Improve simulation speed. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> --------- Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> |
||
|
Bobby Noelte
|
18b580cabe |
fix: ensure EV charge rates settings available
Close stale pull requests/issues / Find Stale issues and PRs (push) Has been cancelled
docker-build / platform-excludes (push) Has been cancelled
pre-commit / pre-commit (push) Has been cancelled
Run Pytest on Pull Request / test (push) Has been cancelled
docker-build / build (push) Has been cancelled
docker-build / merge (push) Has been cancelled
Allow charge rates for electric vehicle to be provided by the POST optimize endpoint. Create a default value in case neither the parameters nor the configuration provide charge rates. This is also to allow to migrate from 0.1.0 configuration format to actual one. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> |
||
|
Bobby NoelteandGitHub
|
b397b5d43e |
fix: automatic optimization (#596)
This fix implements the long term goal to have the EOS server run optimization (or
energy management) on regular intervals automatically. Thus clients can request
the current energy management plan at any time and it is updated on regular
intervals without interaction by the client.
This fix started out to "only" make automatic optimization (or energy management)
runs working. It turned out there are several endpoints that in some way
update predictions or run the optimization. To lock against such concurrent attempts
the code had to be refactored to allow control of execution. During refactoring it
became clear that some classes and files are named without a proper reference
to their usage. Thus not only refactoring but also renaming became necessary.
The names are still not the best, but I hope they are more intuitive.
The fix includes several bug fixes that are not directly related to the automatic optimization
but are necessary to keep EOS running properly to do the automatic optimization and
to test and document the changes.
This is a breaking change as the configuration structure changed once again and
the server API was also enhanced and streamlined. The server API that is used by
Andreas and Jörg in their videos has not changed.
* fix: automatic optimization
Allow optimization to automatically run on configured intervals gathering all
optimization parameters from configuration and predictions. The automatic run
can be configured to only run prediction updates skipping the optimization.
Extend documentaion to also cover automatic optimization. Lock automatic runs
against runs initiated by the /optimize or other endpoints. Provide new
endpoints to retrieve the energy management plan and the genetic solution
of the latest automatic optimization run. Offload energy management to thread
pool executor to keep the app more responsive during the CPU heavy optimization
run.
* fix: EOS servers recognize environment variables on startup
Force initialisation of EOS configuration on server startup to assure
all sources of EOS configuration are properly set up and read. Adapt
server tests and configuration tests to also test for environment
variable configuration.
* fix: Remove 0.0.0.0 to localhost translation under Windows
EOS imposed a 0.0.0.0 to localhost translation under Windows for
convenience. This caused some trouble in user configurations. Now, as the
default IP address configuration is 127.0.0.1, the user is responsible
for to set up the correct Windows compliant IP address.
* fix: allow names for hosts additional to IP addresses
* fix: access pydantic model fields by class
Access by instance is deprecated.
* fix: down sampling key_to_array
* fix: make cache clear endpoint clear all cache files
Make /v1/admin/cache/clear clear all cache files. Before it only cleared
expired cache files by default. Add new endpoint /v1/admin/clear-expired
to only clear expired cache files.
* fix: timezonefinder returns Europe/Paris instead of Europe/Berlin
timezonefinder 8.10 got more inaccurate for timezones in europe as there is
a common timezone. Use new package tzfpy instead which is still returning
Europe/Berlin if you are in Germany. tzfpy also claims to be faster than
timezonefinder.
* fix: provider settings configuration
Provider configuration used to be a union holding the settings for several
providers. Pydantic union handling does not always find the correct type
for a provider setting. This led to exceptions in specific configurations.
Now provider settings are explicit comfiguration items for each possible
provider. This is a breaking change as the configuration structure was
changed.
* fix: ClearOutside weather prediction irradiance calculation
Pvlib needs a pandas time index. Convert time index.
* fix: test config file priority
Do not use config_eos fixture as this fixture already creates a config file.
* fix: optimization sample request documentation
Provide all data in documentation of optimization sample request.
* fix: gitlint blocking pip dependency resolution
Replace gitlint by commitizen. Gitlint is not actively maintained anymore.
Gitlint dependencies blocked pip from dependency resolution.
* fix: sync pre-commit config to actual dependency requirements
.pre-commit-config.yaml was out of sync, also requirements-dev.txt.
* fix: missing babel in requirements.txt
Add babel to requirements.txt
* feat: setup default device configuration for automatic optimization
In case the parameters for automatic optimization are not fully defined a
default configuration is setup to allow the automatic energy management
run. The default configuration may help the user to correctly define
the device configuration.
* feat: allow configuration of genetic algorithm parameters
The genetic algorithm parameters for number of individuals, number of
generations, the seed and penalty function parameters are now avaliable
as configuration options.
* feat: allow configuration of home appliance time windows
The time windows a home appliance is allowed to run are now configurable
by the configuration (for /v1 API) and also by the home appliance parameters
(for the classic /optimize API). If there is no such configuration the
time window defaults to optimization hours, which was the standard before
the change. Documentation on how to configure time windows is added.
* feat: standardize mesaurement keys for battery/ ev SoC measurements
The standardized measurement keys to report battery SoC to the device
simulations can now be retrieved from the device configuration as a
read-only config option.
* feat: feed in tariff prediction
Add feed in tarif predictions needed for automatic optimization. The feed in
tariff can be retrieved as fixed feed in tarif or can be imported. Also add
tests for the different feed in tariff providers. Extend documentation to
cover the feed in tariff providers.
* feat: add energy management plan based on S2 standard instructions
EOS can generate an energy management plan as a list of simple instructions.
May be retrieved by the /v1/energy-management/plan endpoint. The instructions
loosely follow the S2 energy management standard.
* feat: make measurement keys configurable by EOS configuration.
The fixed measurement keys are replaced by configurable measurement keys.
* feat: make pendulum DateTime, Date, Duration types usable for pydantic models
Use pydantic_extra_types.pendulum_dt to get pydantic pendulum types. Types are
added to the datetimeutil utility. Remove custom made pendulum adaptations
from EOS pydantic module. Make EOS modules use the pydantic pendulum types
managed by the datetimeutil module instead of the core pendulum types.
* feat: Add Time, TimeWindow, TimeWindowSequence and to_time to datetimeutil.
The time windows are are added to support home appliance time window
configuration. All time classes are also pydantic models. Time is the base
class for time definition derived from pendulum.Time.
* feat: Extend DataRecord by configurable field like data.
Configurable field like data was added to support the configuration of
measurement records.
* feat: Add additional information to health information
Version information is added to the health endpoints of eos and eosDash.
The start time of the last optimization and the latest run time of the energy
management is added to the EOS health information.
* feat: add pydantic merge model tests
* feat: add plan tab to EOSdash
The plan tab displays the current energy management instructions.
* feat: add predictions tab to EOSdash
The predictions tab displays the current predictions.
* feat: add cache management to EOSdash admin tab
The admin tab is extended by a section for cache management. It allows to
clear the cache.
* feat: add about tab to EOSdash
The about tab resembles the former hello tab and provides extra information.
* feat: Adapt changelog and prepare for release management
Release management using commitizen is added. The changelog file is adapted and
teh changelog and a description for release management is added in the
documentation.
* feat(doc): Improve install and devlopment documentation
Provide a more concise installation description in Readme.md and add extra
installation page and development page to documentation.
* chore: Use memory cache for interpolation instead of dict in inverter
Decorate calculate_self_consumption() with @cachemethod_until_update to cache
results in memory during an energy management/ optimization run. Replacement
of dict type caching in inverter is now possible because all optimization
runs are properly locked and the memory cache CacheUntilUpdateStore is properly
cleared at the start of any energy management/ optimization operation.
* chore: refactor genetic
Refactor the genetic algorithm modules for enhanced module structure and better
readability. Removed unnecessary and overcomplex devices singleton. Also
split devices configuration from genetic algorithm parameters to allow further
development independently from genetic algorithm parameter format. Move
charge rates configuration for electric vehicles from optimization to devices
configuration to allow to have different charge rates for different cars in
the future.
* chore: Rename memory cache to CacheEnergyManagementStore
The name better resembles the task of the cache to chache function and method
results for an energy management run. Also the decorator functions are renamed
accordingly: cachemethod_energy_management, cache_energy_management
* chore: use class properties for config/ems/prediction mixin classes
* chore: skip debug logs from mathplotlib
Mathplotlib is very noisy in debug mode.
* chore: automatically sync bokeh js to bokeh python package
bokeh was updated to 3.8.0, make JS CDN automatically follow the package version.
* chore: rename hello.py to about.py
Make hello.py the adapted EOSdash about page.
* chore: remove demo page from EOSdash
As no the plan and prediction pages are working without configuration, the demo
page is no longer necessary
* chore: split test_server.py for system test
Split test_server.py to create explicit test_system.py for system tests.
* chore: move doc utils to generate_config_md.py
The doc utils are only used in scripts/generate_config_md.py. Move it there to
attribute for strong cohesion.
* chore: improve pydantic merge model documentation
* chore: remove pendulum warning from readme
* chore: remove GitHub discussions from contributing documentation
Github discussions is to be replaced by Akkudoktor.net.
* chore(release): bump version to 0.1.0+dev for development
* build(deps): bump fastapi[standard] from 0.115.14 to 0.117.1
bump fastapi and make coverage version (for pytest-cov) explicit to avoid pip break.
* build(deps): bump uvicorn from 0.36.0 to 0.37.0
BREAKING CHANGE: EOS configuration changed. V1 API changed.
- The available_charge_rates_percent configuration is removed from optimization.
Use the new charge_rate configuration for the electric vehicle
- Optimization configuration parameter hours renamed to horizon_hours
- Device configuration now has to provide the number of devices and device
properties per device.
- Specific prediction provider configuration to be provided by explicit
configuration item (no union for all providers).
- Measurement keys to be provided as a list.
- New feed in tariff providers have to be configured.
- /v1/measurement/loadxxx endpoints are removed. Use generic mesaurement endpoints.
- /v1/admin/cache/clear now clears all cache files. Use
/v1/admin/cache/clear-expired to only clear all expired cache files.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
|
||
|
Bobby NoelteandGitHub
|
bd38b3c5ef |
fix: logging, prediction update, multiple bugs (#584)
docker-build / platform-excludes (push) Has been cancelled
pre-commit / pre-commit (push) Has been cancelled
Run Pytest on Pull Request / test (push) Has been cancelled
docker-build / build (push) Has been cancelled
docker-build / merge (push) Has been cancelled
Close stale pull requests/issues / Find Stale issues and PRs (push) Has been cancelled
* Fix logging configuration issues that made logging stop operation. Switch to Loguru logging (from Python logging). Enable console and file logging with different log levels. Add logging documentation. * Fix logging configuration and EOS configuration out of sync. Added tracking support for nested value updates of Pydantic models. This used to update the logging configuration when the EOS configurationm for logging is changed. Should keep logging config and EOS config in sync as long as all changes to the EOS logging configuration are done by set_nested_value(), which is the case for the REST API. * Fix energy management task looping endlessly after the second update when trying to update the last_update datetime. * Fix get_nested_value() to correctly take values from the dicts in a Pydantic model instance. * Fix usage of model classes instead of model instances in nested value access when evaluation the value type that is associated to each key. * Fix illegal json format in prediction documentation for PVForecastAkkudoktor provider. * Fix documentation qirks and add EOS Connect to integrations. * Support deprecated fields in configuration in documentation generation and EOSdash. * Enhance EOSdash demo to show BrightSky humidity data (that is often missing) * Update documentation reference to German EOS installation videos. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> |
||
 Dominique LasserreandGitHub
|
7ade15e9e3 | fix: Circular runtime import Closes #533 (#535) | ||
|
Dominique Lasserre
|
26762e5e93 | Review comments | ||
|
Dominique Lasserre
|
be26457563 |
Nested config, devices registry
* All config now nested.
- Use default config from model field default values. If providers
should be enabled by default, non-empty default config file could
be provided again.
- Environment variable support with EOS_ prefix and __ between levels,
e.g. EOS_SERVER__EOS_SERVER_PORT=8503 where all values are case
insensitive.
For more information see:
https://docs.pydantic.dev/latest/concepts/pydantic_settings/#parsing-environment-variable-values
- Use devices as registry for configured devices. DeviceBase as base
class with for now just initializion support (in the future expand
to operations during optimization).
- Strip down ConfigEOS to the only configuration instance. Reload
from file or reset to defaults is possible.
* Fix multi-initialization of derived SingletonMixin classes.
|
||
|
NormannandGitHub
|
98f1105c38 |
Probability typo fix (#383)
* Propability->Probability |
||
|
Bobby NoelteandGitHub
|
d4e31d556a |
Add Documentation 2 (#334)
Add documentation that covers: - configuration - prediction Add Python scripts that support automatic documentation generation for configuration data defined with pydantic. Adapt EOS configuration to provide more methods for REST API and automatic documentation generation. Adapt REST API to allow for EOS configuration file load and save. Sort REST API on generation of openapi markdown for docs. Move logutil to core/logging to allow configuration of logging by standard config. Make Akkudoktor predictions always start extraction of prediction data at start of day. Previously extraction started at actual hour. This is to support the code that assumes prediction data to start at start of day. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> |
||
|
Bobby NoelteandGitHub
|
c0ea13d0f4 |
Fix2 electricity price prediction. (#296)
Normalize electricity price prediction to €/Wh. Provide electricity price prediction by €/kWh for convenience. Allow to configure electricity price charges by €/kWh. Also added error page to fastapi rest server to get rid of annoying unrelated fault messages during testing. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> |
||
 AndreasandDominique Lasserre
|
54eae5a871 | Soc 1 hour shift fixed + some german -> english translations in ems | ||
|
Dominique Lasserre
|
053e60aca4 |
Pythonic: Rename self_consumption_probability.py -> interpolator.py
* Rename class self_consumption_probability_interpolator to PascalCase SelfConsumptionProbabilityInterpolator. |
||
|
AndreasandDominique Lasserre
|
410a23e375 |
Self consumption predictor
* Inverter: Self consumption interpolator for better discharge_hour results * Small penalty when EV 100% and charge >0 * Price Forceast (use mean of last 7 days instead of repeat) * Price Prediction as JSON simulation output, config fixed electricty fees configurable + MyPy & Ruff |
||
|
NormannandGitHub
|
5f898e8aab | translation of battery.py v3 (#262) | ||
|
NormannandGitHub
|
810cc17c0b |
Inverter v2 (#245)
* inverter class rewritten second try * cleanup * inverter section of decives.py translation * open api fix * fix openapi v2 * renamed the class itself * ruff fix * Update genetic.py * cleanup * reverted indent |
||
|
Bobby NoelteandGitHub
|
aa334d0b61 |
Improve Configuration and Prediction Usability (#220)
* Update utilities in utils submodule. * Add base configuration modules. * Add server base configuration modules. * Add devices base configuration modules. * Add optimization base configuration modules. * Add utils base configuration modules. * Add prediction abstract and base classes plus tests. * Add PV forecast to prediction submodule. The PV forecast modules are adapted from the class_pvforecast module and replace it. * Add weather forecast to prediction submodule. The modules provide classes and methods to retrieve, manage, and process weather forecast data from various sources. Includes are structured representations of weather data and utilities for fetching forecasts for specific locations and time ranges. BrightSky and ClearOutside are currently supported. * Add electricity price forecast to prediction submodule. * Adapt fastapi server to base config and add fasthtml server. * Add ems to core submodule. * Adapt genetic to config. * Adapt visualize to config. * Adapt common test fixtures to config. * Add load forecast to prediction submodule. * Add core abstract and base classes. * Adapt single test optimization to config. * Adapt devices to config. Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com> |