docs/solo/tools.md

# Tools

On joystick devices, the tools are in **Tools**, grouped into Location, Comms
and System; the Tools home page keeps the two you used last. The navigation
tools are on the [Navigation](./navigation.md) page, Nodes and Admin on
[Contacts](./contacts.md); the [Status](#status) screen opens from its own
home page.

> [!NOTE]
> **Wio Tracker L2:** the tools are apps on the home screen: Messages, Nodes,
> Settings, Compass, Clock, GPS, Bot, Repeater, Admin, Diagnostics. The trail,
> live sharing and the locator are on the map (its tools button) and in
> Settings › Map.

## Clock

The **Clock** home page shows the time with a bar under it that fills with
the seconds (Settings › Display › Clock seconds), the date, and up to three
fields you choose (hold Enter): battery, temperature, humidity, pressure, altitude
(barometric or GPS), light, CO₂, GPS position, satellites, contacts, unread
messages. The time comes from GPS or the phone app; the time zone is in
Settings.

**Enter** on the clock opens the clock tools:

- **Alarm**: a time, repeating daily, on weekdays, at weekends or once. It
  rings with the screen off or locked, but not after a shutdown.
- **Timer**: a countdown that rings when it reaches zero, whatever screen
  you're on.
- **Stopwatch**.
- **Calendar**: the month with today marked and the alarm's days
  underlined; **Left / Right** pages through the months, **Enter** comes
  back to this one.

Any key silences the ringing; it stops by itself after a minute.

## Remote bot

**Tools › Bot** answers messages for you. It watches your direct messages, one
channel and one room, each switched on separately:

- **Trigger and reply**: when a message contains the trigger (several can be
  separated by commas, `*` matches any message), the bot sends the reply. The
  reply can use placeholders, plus `{name}` (the sender) and `{hops}`.
- **Commands**: messages starting with `!` get live data back:

  | Command | Reply |
  | ------- | ----- |
  | `!ping` | `pong` |
  | `!batt`, `!temp`, `!time`, `!loc` | battery, temperature, time, position |
  | `!hops` | how many hops the command took |
  | `!status` | battery, position and time |
  | `!help` | the list of commands |

  Several in one message get one reply: `!batt !time` → `4.10V | 14:30`.
- **Actions** (off by default) let the command change the device: `!buzz`
  (sounds the buzzer to find it), `!gps on` / `!gps off`, `!gps fix` (turns
  the GPS on, waits for a good fix and sends it), `!advert`.

**DM allow = Fav** limits the DM bot to your favourites, and **quiet hours**
stop trigger replies at night (commands still answer). Replies are rate
limited so two bots can't answer each other forever. The room bot uses the
room's saved login.

## Auto-advert

**Tools › Auto-advert** sends an advert with your position every 30 seconds
to 1 hour, so others see you in their Nearby list. With it on at both ends
and Settings › Sound › **AD sound** set, each device beeps when it hears the
other: a hands-free "still in range".

## Repeater

**Tools › Repeater** makes the device relay other people's packets while it
keeps working as a companion. By default it relays on a separate repeater
profile (the community's repeater frequency) and switches back when you turn
it off; **Network = Current** relays on your own frequency instead.

Optional filters keep a mobile repeater from adding noise: skip adverts, a
maximum hop count, **Yield** (let fixed repeaters go first), a minimum SNR,
drop duplicates already relayed by someone else, and relay only your
**scopes**. The Status screen's **Mesh** tab shows how much it forwards.

## Ringtones

**Tools › Ringtone** composes two melodies of up to 32 notes (pitch, octave,
length, tempo). Use them for notifications in Settings › Sound, or for a
single contact or channel from its options.

> [!NOTE]
> **Wio Tracker L2:** the melody editor is under Settings › Sound.

## Status

The **Status** home page sums up the radio, GPS, battery and mesh in four
tiles; **Enter** opens the Status screen, one tab per subject (**Left /
Right** between them, **Up / Down** scrolls):

| Tab | Shows |
| --- | ----- |
| **Radio** | Frequency, SF / BW / CR, TX power, the noise floor over the last half hour, the last packet's signal |
| **GPS** | On / off (**Enter** switches it), fix, satellites, position, altitude, speed, precision, time to first fix |
| **Sky** | The satellites on a sky plot, or each one's signal as bars (**Enter** swaps them); Wio Tracker L1 |
| **Power** | Battery level, voltage, source and trend, then the readings of any sensors |
| **Mesh** | Packets received and sent with a traffic line, forwarded, nodes heard, contacts; **hold Enter** resets the counters |
| **System** | Uptime, firmware, device, memory, the send queue, errors, and a sample of every script the font covers; **Enter** shows a QR code that opens this manual on a phone |

**GPS pwr** in Settings › System turns the GPS off between fixes to save
battery; anything that needs your position (the trail, live share, the
locator) keeps it on.

> [!NOTE]
> **Wio Tracker L2:** the Diagnostics app, with a **Noise** tab that
> measures the noise floor over time and history charts you can touch for the
> value at that moment, and the **GPS** app, on three tabs: **Sky** (a plot
> of the satellites and the fix), **Signal** (a bar per satellite with its
> strength, and the constellations) and **Details** (position, precision,
> time to first fix and what the receiver reports).
> The manual's QR code is in Settings › About.

## GPIO

*Wio Tracker L1 only.* **Tools › GPIO** sets four spare pins as input,
output or (GPIO1–2) analog input, shows their level and switches outputs. The
bot's `!gpio1`…`!gpio4` commands read and set the same pins.