mirror of
https://github.com/MarekZegare4/MeshCore-Solo.git
synced 2026-07-26 23:08:11 +00:00
72 lines
2.9 KiB
Markdown
72 lines
2.9 KiB
Markdown
|
# Wio Tracker L1 — Extended Companion Radio Firmware
|
|||
|
|
|
|||
|
|
This branch extends the official MeshCore companion radio firmware for the **Seeed Wio Tracker L1** (NRF52840 + SX1262 + SH1106 OLED 128×64 + GPS + buzzer + 5-way joystick).
|
|||
|
|
|
|||
|
|
## New Build Variants
|
|||
|
|
|
|||
|
|
In addition to the standard `_companion_radio_usb` and `_companion_radio_ble` builds, two new variants are available with a full **settings screen**:
|
|||
|
|
|
|||
|
|
| Environment | Interface |
|
|||
|
|
|---|---|
|
|||
|
|
| `WioTrackerL1_companion_radio_usb_settings` | USB serial |
|
|||
|
|
| `WioTrackerL1_companion_radio_ble_settings` | Bluetooth LE |
|
|||
|
|
|
|||
|
|
The settings screen is accessed by navigating to the last page of the home screen and pressing Enter.
|
|||
|
|
|
|||
|
|
## New Features
|
|||
|
|
|
|||
|
|
### Settings Screen
|
|||
|
|
|
|||
|
|
All settings are saved to flash and restored on next boot.
|
|||
|
|
|
|||
|
|
| Setting | Options | Default |
|
|||
|
|
|---|---|---|
|
|||
|
|
| Display brightness | 5 levels (very dim → max) | Medium |
|
|||
|
|
| Buzzer | ON / OFF | ON |
|
|||
|
|
| TX Power | 2 – 22 dBm | Board default |
|
|||
|
|
| Auto-off delay | 5 s / 15 s / 30 s / 60 s / never | 15 s |
|
|||
|
|
| GPS update interval | off / 30 s / 1 min / 5 min / 15 min / 30 min | off |
|
|||
|
|
| Timezone | UTC−12 .. UTC+14 | UTC |
|
|||
|
|
| Low battery shutdown | off / 3.0 V – 3.5 V | 3.4 V |
|
|||
|
|
| Battery display | icon / % / voltage | icon |
|
|||
|
|
|
|||
|
|
### Clock Screen
|
|||
|
|
|
|||
|
|
A dedicated clock page on the home screen shows the current time and date, synchronized from GPS. Timezone is applied from the settings above.
|
|||
|
|
|
|||
|
|
### Battery Display Modes
|
|||
|
|
|
|||
|
|
The top-right battery indicator can be switched between:
|
|||
|
|
- **Icon** — classic fill bar
|
|||
|
|
- **%** — percentage, where 0% = low battery shutdown threshold (if set), otherwise 3.2 V
|
|||
|
|
- **V** — live voltage (e.g. `3.84V`)
|
|||
|
|
|
|||
|
|
Battery voltage is filtered with an exponential moving average (α = 0.2) to smooth out ADC noise from uneven load.
|
|||
|
|
|
|||
|
|
### Low Battery Auto-Shutdown
|
|||
|
|
|
|||
|
|
When the filtered battery voltage drops below the configured threshold, the device displays a warning on screen for 2 seconds and then shuts down gracefully. The threshold is configurable from the settings screen (3.0 V – 3.5 V) or can be disabled.
|
|||
|
|
|
|||
|
|
## Bug Fixes
|
|||
|
|
|
|||
|
|
- **Buzzer mute at startup** — the saved mute preference is now respected during the startup sound; previously the buzzer was always unmuted on boot regardless of the saved setting.
|
|||
|
|
- **Brightness change delay** — brightness changes are now applied instantly without triggering a flash write on every keypress; flash is written only when exiting the settings screen.
|
|||
|
|
|
|||
|
|
## Build & Release
|
|||
|
|
|
|||
|
|
Firmware is built automatically via GitHub Actions on every `wio-tracker-*` tag push.
|
|||
|
|
Pre-built `.uf2` files are published in the [Releases](../../releases) section.
|
|||
|
|
|
|||
|
|
To flash: copy the `.uf2` file to the device while it is in bootloader mode (double-press reset).
|
|||
|
|
|
|||
|
|
## Syncing with Upstream
|
|||
|
|
|
|||
|
|
This branch tracks [meshcore-dev/MeshCore](https://github.com/meshcore-dev/MeshCore).
|
|||
|
|
To pull upstream updates:
|
|||
|
|
|
|||
|
|
```bash
|
|||
|
|
git fetch upstream
|
|||
|
|
git rebase upstream/main
|
|||
|
|
git push origin wio-tracker-l1-improvements --force-with-lease
|
|||
|
|
```
|