MeshCore-Solo/docs/companion_protocol.md

# Companion Protocol

- **Last Updated**: 2026-03-08
- **Protocol Version**: Companion Firmware v1.12.0+

> NOTE: This document is still in development. Some information may be inaccurate.

This document provides a comprehensive guide for communicating with MeshCore devices over Bluetooth Low Energy (BLE).

It is platform-agnostic and can be used for Android, iOS, Python, JavaScript, or any other platform that supports BLE.

## Official Libraries

Please see the following repos for existing MeshCore Companion Protocol libraries.

- JavaScript: [https://github.com/meshcore-dev/meshcore.js](https://github.com/meshcore-dev/meshcore.js)
- Python: [https://github.com/meshcore-dev/meshcore_py](https://github.com/meshcore-dev/meshcore_py)

## Important Security Note

All secrets, hashes, and cryptographic values shown in this guide are example values only.

- All hex values, public keys and hashes are for demonstration purposes only
- Never use example secrets in production
- Always generate new cryptographically secure random secrets
- Please implement proper security practices in your implementation
- This guide is for protocol documentation only

## Table of Contents

1. [BLE Connection](#ble-connection)
2. [Packet Structure](#packet-structure)
3. [Commands](#commands)
4. [Channel Management](#channel-management)
5. [Message Handling](#message-handling)
6. [Response Parsing](#response-parsing)
7. [Example Implementation Flow](#example-implementation-flow)
8. [Best Practices](#best-practices)
9. [Troubleshooting](#troubleshooting)

---

## BLE Connection

### Service and Characteristics

MeshCore Companion devices expose a BLE service with the following UUIDs:

- **Service UUID**: `6E400001-B5A3-F393-E0A9-E50E24DCCA9E`
- **RX Characteristic** (App → Firmware): `6E400002-B5A3-F393-E0A9-E50E24DCCA9E`
- **TX Characteristic** (Firmware → App): `6E400003-B5A3-F393-E0A9-E50E24DCCA9E`

### Connection Steps

1. **Scan for Devices**
    - Scan for BLE devices advertising the MeshCore Service UUID
    - Optionally filter by device name (typically contains "MeshCore" prefix)
    - Note the device MAC address for reconnection

2. **Connect to GATT**
    - Connect to the device using the discovered MAC address
    - Wait for connection to be established

3. **Discover Services and Characteristics**
    - Discover the service with UUID `6E400001-B5A3-F393-E0A9-E50E24DCCA9E`
    - Discover the RX characteristic `6E400002-B5A3-F393-E0A9-E50E24DCCA9E`
        - Your app writes to this, the firmware reads from this
    - Discover the TX characteristic `6E400003-B5A3-F393-E0A9-E50E24DCCA9E`
        - The firmware writes to this, your app reads from this

4. **Enable Notifications**
    - Subscribe to notifications on the TX characteristic to receive data from the firmware

5. **Send Initial Commands**
    - Send `CMD_APP_START` to identify your app to firmware and get radio settings
    - Send `CMD_DEVICE_QEURY` to fetch device info and negotiate supported protocol versions
    - Send `CMD_SET_DEVICE_TIME` to set the firmware clock
    - Send `CMD_GET_CONTACTS` to fetch all contacts
    - Send `CMD_GET_CHANNEL` multiple times to fetch all channel slots
    - Send `CMD_SYNC_NEXT_MESSAGE` to fetch the next message stored in firmware
    - Setup listeners for push codes, such as `PUSH_CODE_MSG_WAITING` or `PUSH_CODE_ADVERT`
    - See [Commands](#commands) section for information on other commands

**Note**: MeshCore devices may disconnect after periods of inactivity. Implement auto-reconnect logic with exponential backoff.

### BLE Write Type

When writing commands to the RX characteristic, specify the write type:

- **Write with Response** (default): Waits for acknowledgment from device
- **Write without Response**: Faster but no acknowledgment

**Platform-specific**:

- **Android**: Use `BluetoothGattCharacteristic.WRITE_TYPE_DEFAULT` or `WRITE_TYPE_NO_RESPONSE`
- **iOS**: Use `CBCharacteristicWriteType.withResponse` or `.withoutResponse`
- **Python (bleak)**: Use `write_gatt_char()` with `response=True` or `False`

**Recommendation**: Use write with response for reliability.

### MTU (Maximum Transmission Unit)

The default BLE MTU is 23 bytes (20 bytes payload). For larger commands like `SET_CHANNEL` (50 bytes), you may need to:

1. **Request Larger MTU**: Request MTU of 512 bytes if supported
    - Android: `gatt.requestMtu(512)`
    - iOS: `peripheral.maximumWriteValueLength(for:)`
    - Python (bleak): MTU is negotiated automatically

### Command Sequencing

**Critical**: Commands must be sent in the correct sequence:

1. **After Connection**:
    - Wait for BLE connection to be established
    - Wait for services/characteristics to be discovered
    - Wait for notifications to be enabled
    - Now you can safely send commands to the firmware

2. **Command-Response Matching**:
    - Send one command at a time
    - Wait for a response before sending another command
    - Use a timeout (typically 5 seconds)
    - Match response to command by type (e.g: `CMD_GET_CHANNEL` → `RESP_CODE_CHANNEL_INFO`)

### Command Queue Management

For reliable operation, implement a command queue.

**Queue Structure**:

- Maintain a queue of pending commands
- Track which command is currently waiting for a response
- Only send next command after receiving response or timeout

**Error Handling**:

- On timeout, clear current command, process next in queue
- On error, log error, clear current command, process next

---

## Packet Structure

The MeshCore protocol uses a binary format with the following structure:

- **Commands**: Sent from app to firmware via RX characteristic
- **Responses**: Received from firmware via TX characteristic notifications
- **All multi-byte integers**: Little-endian byte order (except CayenneLPP which is Big-endian)
- **All strings**: UTF-8 encoding

Most packets follow this format:
```
[Packet Type (1 byte)] [Data (variable length)]
```

The first byte indicates the packet type (see [Response Parsing](#response-parsing)).

---

## Commands

### 1. App Start

**Purpose**: Initialize communication with the device. Must be sent first after connection.

**Command Format**:
```
Byte 0: 0x01
Bytes 1-7: Reserved (currently ignored by firmware)
Bytes 8+: Application name (UTF-8, optional)
```

**Example** (hex):
```
01 00 00 00 00 00 00 00 6d 63 63 6c 69
```

**Response**: `PACKET_SELF_INFO` (0x05)

---

### 2. Device Query

**Purpose**: Query device information.

**Command Format**:
```
Byte 0: 0x16
Byte 1: 0x03
```

**Example** (hex):
```
16 03
```

**Response**: `PACKET_DEVICE_INFO` (0x0D) with device information

---

### 3. Get Channel Info

**Purpose**: Retrieve information about a specific channel.

**Command Format**:
```
Byte 0: 0x1F
Byte 1: Channel Index (0-7)
```

**Example** (get channel 1):
```
1F 01
```

**Response**: `PACKET_CHANNEL_INFO` (0x12) with channel details

---

### 4. Set Channel

**Purpose**: Create or update a channel on the device.

**Command Format**:
```
Byte 0: 0x20
Byte 1: Channel Index (0-7)
Bytes 2-33: Channel Name (32 bytes, UTF-8, null-padded)
Bytes 34-49: Secret (16 bytes)
```

**Total Length**: 50 bytes

**Channel Index**:
- Index 0: Reserved for public channels (no secret)
- Indices 1-7: Available for private channels

**Channel Name**:
- UTF-8 encoded
- Maximum 32 bytes
- Padded with null bytes (0x00) if shorter

**Secret Field** (16 bytes):
- For **private channels**: 16-byte secret
- For **public channels**: All zeros (0x00)

**Example** (create channel "YourChannelName" at index 1 with secret):
```
20 01 53 4D 53 00 00 ... (name padded to 32 bytes)
    [16 bytes of secret]
```

**Note**: The 32-byte secret variant is unsupported and returns `PACKET_ERROR`.

**Response**: `PACKET_OK` (0x00) on success, `PACKET_ERROR` (0x01) on failure

---

### 5. Send Channel Message

**Purpose**: Send a text message to a channel.

**Command Format**:
```
Byte 0: 0x03
Byte 1: 0x00
Byte 2: Channel Index (0-7)
Bytes 3-6: Timestamp (32-bit little-endian Unix timestamp, seconds)
Bytes 7+: Message Text (UTF-8, variable length)
```

**Timestamp**: Unix timestamp in seconds (32-bit unsigned integer, little-endian)

**Example** (send "Hello" to channel 1 at timestamp 1234567890):
```
03 00 01 D2 02 96 49 48 65 6C 6C 6F
```

**Response**: `PACKET_MSG_SENT` (0x06) on success

---

### 6. Get Message

**Purpose**: Request the next queued message from the device.

**Command Format**:
```
Byte 0: 0x0A
```

**Example** (hex):
```
0A
```

**Response**: 
- `PACKET_CHANNEL_MSG_RECV` (0x08) or `PACKET_CHANNEL_MSG_RECV_V3` (0x11) for channel messages
- `PACKET_CONTACT_MSG_RECV` (0x07) or `PACKET_CONTACT_MSG_RECV_V3` (0x10) for contact messages
- `PACKET_NO_MORE_MSGS` (0x0A) if no messages available

**Note**: Poll this command periodically to retrieve queued messages. The device may also send `PACKET_MESSAGES_WAITING` (0x83) as a notification when messages are available.

---

### 7. Get Battery and Storage

**Purpose**: Query device battery voltage and storage usage.

**Command Format**:
```
Byte 0: 0x14
```

**Example** (hex):
```
14
```

**Response**: `PACKET_BATTERY` (0x0C) with battery millivolts and storage information

---

## Channel Management

### Channel Types

1. **Public Channel**
    - Uses a publicly known 16-byte key: `8b3387e9c5cdea6ac9e5edbaa115cd72`
    - Anyone can join this channel, messages should be considered public
    - Used as the default public group chat
2. **Hashtag Channels**
    - Uses a secret key derived from the channel name
    - It is the first 16 bytes of `sha256("#test")`
    - For example hashtag channel `#test` has the key: `9cd8fcf22a47333b591d96a2b848b73f`
    - Used as a topic based public group chat, separate from the default public channel
3. **Private Channels**
    - Uses a randomly generated 16-byte secret key
    - Messages should be considered private between those that know the secret
    - Users should keep the key secret, and only share with those you want to communicate with
    - Used as a secure private group chat

### Channel Lifecycle

1. **Set Channel**:
    - Fetch all channel slots, and find one with empty name and all-zero secret
    - Generate or provide a 16-byte secret
    - Send `CMD_SET_CHANNEL` with name and a 16-byte secret
2. **Get Channel**:
    - Send `CMD_GET_CHANNEL` with channel index
    - Parse `RESP_CODE_CHANNEL_INFO` response
3. **Delete Channel**:
    - Send `CMD_SET_CHANNEL` with empty name and all-zero secret
    - Or overwrite with a new channel

---

## Message Handling

### Receiving Messages

Messages are received via the TX characteristic (notifications). The device sends:

1. **Channel Messages**:
   - `PACKET_CHANNEL_MSG_RECV` (0x08) - Standard format
   - `PACKET_CHANNEL_MSG_RECV_V3` (0x11) - Version 3 with SNR

2. **Contact Messages**:
   - `PACKET_CONTACT_MSG_RECV` (0x07) - Standard format
   - `PACKET_CONTACT_MSG_RECV_V3` (0x10) - Version 3 with SNR

3. **Notifications**:
   - `PACKET_MESSAGES_WAITING` (0x83) - Indicates messages are queued

### Contact Message Format

**Standard Format** (`PACKET_CONTACT_MSG_RECV`, 0x07):
```
Byte 0: 0x07 (packet type)
Bytes 1-6: Public Key Prefix (6 bytes, hex)
Byte 7: Path Length
Byte 8: Text Type
Bytes 9-12: Timestamp (32-bit little-endian)
Bytes 13-16: Signature (4 bytes, only if txt_type == 2)
Bytes 17+: Message Text (UTF-8)
```

**V3 Format** (`PACKET_CONTACT_MSG_RECV_V3`, 0x10):
```
Byte 0: 0x10 (packet type)
Byte 1: SNR (signed byte, multiplied by 4)
Bytes 2-3: Reserved
Bytes 4-9: Public Key Prefix (6 bytes, hex)
Byte 10: Path Length
Byte 11: Text Type
Bytes 12-15: Timestamp (32-bit little-endian)
Bytes 16-19: Signature (4 bytes, only if txt_type == 2)
Bytes 20+: Message Text (UTF-8)
```

**Parsing Pseudocode**:
```python
def parse_contact_message(data):
    packet_type = data[0]
    offset = 1
    
    # Check for V3 format
    if packet_type == 0x10:  # V3
        snr_byte = data[offset]
        snr = ((snr_byte if snr_byte < 128 else snr_byte - 256) / 4.0)
        offset += 3  # Skip SNR + reserved
    
    pubkey_prefix = data[offset:offset+6].hex()
    offset += 6
    
    path_len = data[offset]
    txt_type = data[offset + 1]
    offset += 2
    
    timestamp = int.from_bytes(data[offset:offset+4], 'little')
    offset += 4
    
    # If txt_type == 2, skip 4-byte signature
    if txt_type == 2:
        offset += 4
    
    message = data[offset:].decode('utf-8')
    
    return {
        'pubkey_prefix': pubkey_prefix,
        'path_len': path_len,
        'txt_type': txt_type,
        'timestamp': timestamp,
        'message': message,
        'snr': snr if packet_type == 0x10 else None
    }
```

### Channel Message Format

**Standard Format** (`PACKET_CHANNEL_MSG_RECV`, 0x08):
```
Byte 0: 0x08 (packet type)
Byte 1: Channel Index (0-7)
Byte 2: Path Length
Byte 3: Text Type
Bytes 4-7: Timestamp (32-bit little-endian)
Bytes 8+: Message Text (UTF-8)
```

**V3 Format** (`PACKET_CHANNEL_MSG_RECV_V3`, 0x11):
```
Byte 0: 0x11 (packet type)
Byte 1: SNR (signed byte, multiplied by 4)
Bytes 2-3: Reserved
Byte 4: Channel Index (0-7)
Byte 5: Path Length
Byte 6: Text Type
Bytes 7-10: Timestamp (32-bit little-endian)
Bytes 11+: Message Text (UTF-8)
```

**Parsing Pseudocode**:
```python
def parse_channel_message(data):
    packet_type = data[0]
    offset = 1
    
    # Check for V3 format
    if packet_type == 0x11:  # V3
        snr_byte = data[offset]
        snr = ((snr_byte if snr_byte < 128 else snr_byte - 256) / 4.0)
        offset += 3  # Skip SNR + reserved
    
    channel_idx = data[offset]
    path_len = data[offset + 1]
    txt_type = data[offset + 2]
    timestamp = int.from_bytes(data[offset+3:offset+7], 'little')
    message = data[offset+7:].decode('utf-8')
    
    return {
        'channel_idx': channel_idx,
        'timestamp': timestamp,
        'message': message,
        'snr': snr if packet_type == 0x11 else None
    }
```

### Sending Messages

Use the `SEND_CHANNEL_MESSAGE` command (see [Commands](#commands)).

**Important**: 
- Messages are limited to 133 characters per MeshCore specification
- Long messages should be split into chunks
- Include a chunk indicator (e.g., "[1/3] message text")

---

## Response Parsing

### Packet Types

| Value | Name                       | Description                   |
|-------|----------------------------|-------------------------------|
| 0x00  | PACKET_OK                  | Command succeeded             |
| 0x01  | PACKET_ERROR               | Command failed                |
| 0x02  | PACKET_CONTACT_START       | Start of contact list         |
| 0x03  | PACKET_CONTACT             | Contact information           |
| 0x04  | PACKET_CONTACT_END         | End of contact list           |
| 0x05  | PACKET_SELF_INFO           | Device self-information       |
| 0x06  | PACKET_MSG_SENT            | Message sent confirmation     |
| 0x07  | PACKET_CONTACT_MSG_RECV    | Contact message (standard)    |
| 0x08  | PACKET_CHANNEL_MSG_RECV    | Channel message (standard)    |
| 0x09  | PACKET_CURRENT_TIME        | Current time response         |
| 0x0A  | PACKET_NO_MORE_MSGS        | No more messages available    |
| 0x0C  | PACKET_BATTERY             | Battery level                 |
| 0x0D  | PACKET_DEVICE_INFO         | Device information            |
| 0x10  | PACKET_CONTACT_MSG_RECV_V3 | Contact message (V3 with SNR) |
| 0x11  | PACKET_CHANNEL_MSG_RECV_V3 | Channel message (V3 with SNR) |
| 0x12  | PACKET_CHANNEL_INFO        | Channel information           |
| 0x80  | PACKET_ADVERTISEMENT       | Advertisement packet          |
| 0x82  | PACKET_ACK                 | Acknowledgment                |
| 0x83  | PACKET_MESSAGES_WAITING    | Messages waiting notification |
| 0x88  | PACKET_LOG_DATA            | RF log data (can be ignored)  |

### Parsing Responses

**PACKET_OK** (0x00):
```
Byte 0: 0x00
Bytes 1-4: Optional value (32-bit little-endian integer)
```

**PACKET_ERROR** (0x01):
```
Byte 0: 0x01
Byte 1: Error code (optional)
```

**PACKET_CHANNEL_INFO** (0x12):
```
Byte 0: 0x12
Byte 1: Channel Index
Bytes 2-33: Channel Name (32 bytes, null-terminated)
Bytes 34-49: Secret (16 bytes)
```

**Note**: The device returns the 16-byte channel secret in this response.

**PACKET_DEVICE_INFO** (0x0D):
```
Byte 0: 0x0D
Byte 1: Firmware Version (uint8)
Bytes 2+: Variable length based on firmware version

For firmware version >= 3:
Byte 2: Max Contacts Raw (uint8, actual = value * 2)
Byte 3: Max Channels (uint8)
Bytes 4-7: BLE PIN (32-bit little-endian)
Bytes 8-19: Firmware Build (12 bytes, UTF-8, null-padded)
Bytes 20-59: Model (40 bytes, UTF-8, null-padded)
Bytes 60-79: Version (20 bytes, UTF-8, null-padded)
Byte 80: Client repeat enabled/preferred (firmware v9+)
Byte 81: Path hash mode (firmware v10+)
```

**Parsing Pseudocode**:
```python
def parse_device_info(data):
    if len(data) < 2:
        return None
    
    fw_ver = data[1]
    info = {'fw_ver': fw_ver}
    
    if fw_ver >= 3 and len(data) >= 80:
        info['max_contacts'] = data[2] * 2
        info['max_channels'] = data[3]
        info['ble_pin'] = int.from_bytes(data[4:8], 'little')
        info['fw_build'] = data[8:20].decode('utf-8').rstrip('\x00').strip()
        info['model'] = data[20:60].decode('utf-8').rstrip('\x00').strip()
        info['ver'] = data[60:80].decode('utf-8').rstrip('\x00').strip()
    
    return info
```

**PACKET_BATTERY** (0x0C):
```
Byte 0: 0x0C
Bytes 1-2: Battery Voltage (16-bit little-endian, millivolts)
Bytes 3-6: Used Storage (32-bit little-endian, KB)
Bytes 7-10: Total Storage (32-bit little-endian, KB)
```

**Parsing Pseudocode**:
```python
def parse_battery(data):
    if len(data) < 3:
        return None
    
    mv = int.from_bytes(data[1:3], 'little')
    info = {'battery_mv': mv}
    
    if len(data) >= 11:
        info['used_kb'] = int.from_bytes(data[3:7], 'little')
        info['total_kb'] = int.from_bytes(data[7:11], 'little')
    
    return info
```

**PACKET_SELF_INFO** (0x05):
```
Byte 0: 0x05
Byte 1: Advertisement Type
Byte 2: TX Power
Byte 3: Max TX Power
Bytes 4-35: Public Key (32 bytes, hex)
Bytes 36-39: Advertisement Latitude (32-bit little-endian, divided by 1e6)
Bytes 40-43: Advertisement Longitude (32-bit little-endian, divided by 1e6)
Byte 44: Multi ACKs
Byte 45: Advertisement Location Policy
Byte 46: Telemetry Mode (bitfield)
Byte 47: Manual Add Contacts (bool)
Bytes 48-51: Radio Frequency (32-bit little-endian, divided by 1000.0)
Bytes 52-55: Radio Bandwidth (32-bit little-endian, divided by 1000.0)
Byte 56: Radio Spreading Factor
Byte 57: Radio Coding Rate
Bytes 58+: Device Name (UTF-8, variable length, no null terminator required)
```

**Parsing Pseudocode**:
```python
def parse_self_info(data):
    if len(data) < 36:
        return None
    
    offset = 1
    info = {
        'adv_type': data[offset],
        'tx_power': data[offset + 1],
        'max_tx_power': data[offset + 2],
        'public_key': data[offset + 3:offset + 35].hex()
    }
    offset += 35
    
    lat = int.from_bytes(data[offset:offset+4], 'little') / 1e6
    lon = int.from_bytes(data[offset+4:offset+8], 'little') / 1e6
    info['adv_lat'] = lat
    info['adv_lon'] = lon
    offset += 8
    
    info['multi_acks'] = data[offset]
    info['adv_loc_policy'] = data[offset + 1]
    telemetry_mode = data[offset + 2]
    info['telemetry_mode_env'] = (telemetry_mode >> 4) & 0b11
    info['telemetry_mode_loc'] = (telemetry_mode >> 2) & 0b11
    info['telemetry_mode_base'] = telemetry_mode & 0b11
    info['manual_add_contacts'] = data[offset + 3] > 0
    offset += 4
    
    freq = int.from_bytes(data[offset:offset+4], 'little') / 1000.0
    bw = int.from_bytes(data[offset+4:offset+8], 'little') / 1000.0
    info['radio_freq'] = freq
    info['radio_bw'] = bw
    info['radio_sf'] = data[offset + 8]
    info['radio_cr'] = data[offset + 9]
    offset += 10
    
    if offset < len(data):
        name_bytes = data[offset:]
        info['name'] = name_bytes.decode('utf-8').rstrip('\x00').strip()
    
    return info
```

**PACKET_MSG_SENT** (0x06):
```
Byte 0: 0x06
Byte 1: Route Flag (0 = direct, 1 = flood)
Bytes 2-5: Tag / Expected ACK (4 bytes, little-endian)
Bytes 6-9: Suggested Timeout (32-bit little-endian, milliseconds)
```

**PACKET_ACK** (0x82):
```
Byte 0: 0x82
Bytes 1-6: ACK Code (6 bytes, hex)
```

### Error Codes

**PACKET_ERROR** (0x01) may include an error code in byte 1:

| Error Code | Description |
|------------|-------------|
| 0x00 | Generic error (no specific code) |
| 0x01 | Invalid command |
| 0x02 | Invalid parameter |
| 0x03 | Channel not found |
| 0x04 | Channel already exists |
| 0x05 | Channel index out of range |
| 0x06 | Secret mismatch |
| 0x07 | Message too long |
| 0x08 | Device busy |
| 0x09 | Not enough storage |

**Note**: Error codes may vary by firmware version. Always check byte 1 of `PACKET_ERROR` response.

### Frame Handling

BLE implementations enqueue and deliver one protocol frame per BLE write/notification at the firmware layer.

- Apps should treat each characteristic write/notification as exactly one companion protocol frame
- Apps should still validate frame lengths before parsing
- Future transports or firmware revisions may differ, so avoid assuming fixed payload sizes for variable-length responses

### Response Handling

1. **Command-Response Pattern**:
   - Send command via RX characteristic
   - Wait for response via TX characteristic (notification)
   - Match response to command using sequence numbers or command type
   - Handle timeout (typically 5 seconds)
   - Use command queue to prevent concurrent commands

2. **Asynchronous Messages**:
   - Device may send messages at any time via TX characteristic
   - Handle `PACKET_MESSAGES_WAITING` (0x83) by polling `GET_MESSAGE` command
   - Parse incoming messages and route to appropriate handlers
   - Validate frame length before decoding

3. **Response Matching**:
   - Match responses to commands by expected packet type:
     - `APP_START` → `PACKET_SELF_INFO`
     - `DEVICE_QUERY` → `PACKET_DEVICE_INFO`
     - `GET_CHANNEL` → `PACKET_CHANNEL_INFO`
     - `SET_CHANNEL` → `PACKET_OK` or `PACKET_ERROR`
     - `SEND_CHANNEL_MESSAGE` → `PACKET_MSG_SENT`
     - `GET_MESSAGE` → `PACKET_CHANNEL_MSG_RECV`, `PACKET_CONTACT_MSG_RECV`, or `PACKET_NO_MORE_MSGS`
     - `GET_BATTERY` → `PACKET_BATTERY`

4. **Timeout Handling**:
   - Default timeout: 5 seconds per command
   - On timeout: Log error, clear current command, proceed to next in queue
   - Some commands may take longer (e.g., `SET_CHANNEL` may need 1-2 seconds)
   - Consider longer timeout for channel operations

5. **Error Recovery**:
   - On `PACKET_ERROR`: Log error code, clear current command
   - On connection loss: Clear command queue, attempt reconnection
   - On invalid response: Log warning, clear current command, proceed

---

## Example Implementation Flow

### Initialization

```python
# 1. Scan for MeshCore device
device = scan_for_device("MeshCore")

# 2. Connect to BLE GATT
gatt = connect_to_device(device)

# 3. Discover services and characteristics
service = discover_service(gatt, "6E400001-B5A3-F393-E0A9-E50E24DCCA9E")
rx_char = discover_characteristic(service, "6E400002-B5A3-F393-E0A9-E50E24DCCA9E")
tx_char = discover_characteristic(service, "6E400003-B5A3-F393-E0A9-E50E24DCCA9E")

# 4. Enable notifications on TX characteristic
enable_notifications(tx_char, on_notification_received)

# 5. Send AppStart command
send_command(rx_char, build_app_start())
wait_for_response(PACKET_SELF_INFO)
```

### Creating a Private Channel

```python
# 1. Generate 16-byte secret
secret_16_bytes = generate_secret(16)  # Use CSPRNG
secret_hex = secret_16_bytes.hex()

# 2. Build SET_CHANNEL command
channel_name = "YourChannelName"
channel_index = 1  # Use 1-7 for private channels
command = build_set_channel(channel_index, channel_name, secret_16_bytes)

# 3. Send command
send_command(rx_char, command)
response = wait_for_response(PACKET_OK)

# 4. Store secret locally
store_channel_secret(channel_index, secret_hex)
```

### Sending a Message

```python
# 1. Build channel message command
channel_index = 1
message = "Hello, MeshCore!"
timestamp = int(time.time())
command = build_channel_message(channel_index, message, timestamp)

# 2. Send command
send_command(rx_char, command)
response = wait_for_response(PACKET_MSG_SENT)
```

### Receiving Messages

```python
def on_notification_received(data):
    packet_type = data[0]
    
    if packet_type == PACKET_CHANNEL_MSG_RECV or packet_type == PACKET_CHANNEL_MSG_RECV_V3:
        message = parse_channel_message(data)
        handle_channel_message(message)
    elif packet_type == PACKET_MESSAGES_WAITING:
        # Poll for messages
        send_command(rx_char, build_get_message())
```

---

## Best Practices

1. **Connection Management**:
   - Implement auto-reconnect with exponential backoff
   - Handle disconnections gracefully
   - Store last connected device address for quick reconnection

2. **Secret Management**:
   - Always use cryptographically secure random number generators
   - Store secrets securely (encrypted storage)
   - Never log or transmit secrets in plain text

3. **Message Handling**:
   - Send `CMD_SYNC_NEXT_MESSAGE` when `PUSH_CODE_MSG_WAITING` is received
   - Implement message deduplication to avoid display the same message twice

4. **Channel Management**:
    - Fetch all channel slots even if you encounter an empty slot
    - Ideally save new channels into the first empty slot

5. **Error Handling**:
   - Implement timeouts for all commands (typically 5 seconds)
   - Handle `RESP_CODE_ERR` responses appropriately

---

## Troubleshooting

### Connection Issues

- **Device not found**: Ensure device is powered on and advertising
- **Connection timeout**: Check Bluetooth permissions and device proximity
- **GATT errors**: Ensure proper service/characteristic discovery

### Command Issues

- **No response**: Verify notifications are enabled, check connection state
- **Error responses**: Verify command format and check error code
- **Timeout**: Increase timeout value or try again

### Message Issues

- **Messages not received**: Poll `GET_MESSAGE` command periodically
- **Duplicate messages**: Implement message deduplication using timestamp/content as a unique id
- **Message truncation**: Send long messages as separate shorter messages