Mirrors/MeshCore-Solo
1
0
Fork 0
mirror of https://github.com/MarekZegare4/MeshCore-Solo.git synced 2026-08-01 17:56:12 +00:00
Code Issues Packages Projects Releases Wiki Activity

fix(bot,ui): defer bot actions past throttle, fix CardKB lock bypass, add !gps fix timeout arg

Browse Source 
- Bot Actions (!buzz/!gps/!advert/!gpio1-4) ran their side effect
  immediately during botScanCommands(), before quiet-hours/cooldown/
  per-contact throttle were checked -- those gates only suppressed the
  reply text, not the actual buzz/GPS toggle/advert/pin write. botCommandReply()
  now only records what was requested; applyPendingBotActions() runs the
  deferred effects once a wrapper's throttle checks pass and the ack sent,
  mirroring the existing _locfix_requested pattern. resetPendingBotActions()
  clears everything on every throttled/aborted path.

- CardKB's Fn+<letter> accent-popup shortcut bypassed the locked-input gate
  (it called into KeyboardWidget directly instead of through the
  enqueueKey()/dequeue path every other key uses, so it wasn't discarded
  while _locked). Now checks _locked itself.

- Since a locked device now correctly ignores CardKB entirely, Fn+Esc
  (single press) is added as CardKB's own lock/unlock gesture -- otherwise
  a CardKB-only setup had no way to unlock. Esc rather than the adjacent
  Fn+Backspace, to avoid an accidental press.

- botScanCommands() now parses up to two arguments per command instead of
  one. Used by "!gps fix [seconds]" to override the default 90s timeout
  (clamped 15-300s) for a poor sky view where 90s isn't always enough to
  reach isLocFixReady()'s HDOP/satellite bar.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
This commit is contained in:
Jakub
2026-07-24 23:51:31 +02:00
co-authored by Claude Sonnet 5
parent 7b6ae8e2cb
commit 0a61b7ef15
7 changed files with 173 additions and 41 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/solo_features/tools_screen/tools_screen.md
+1 -1
View File
@@ -451,7 +451,7 @@ A separate **Actions** toggle, nested under Commands (Commands must be ON for Ac
| ----------------- | -------------------------------------------------------------------- |
| `!buzz [seconds]` | Sounds the buzzer as a find-me signal — default 5s, capped at 30s. Sounds even if the buzzer is muted in Settings (that's the point of a find-me signal). |
| `!gps on` / `!gps off` | Enables/disables GPS, same effect as the Home page's GPS toggle. |
| `!gps fix` | Single-shot location: turns GPS on if it wasn't already, waits for a stabilised fix (HDOP ≤ 2.0, or ≥8 satellites on GPS hardware that doesn't report HDOP, averaged over 10s), sends the position, then restores GPS to whatever state it was in before. Replies in two parts — an immediate `GPS: acquiring fix...` ack, then the position (or `GPS: no fix (timeout)` / a partial fix) as a follow-up message up to 90s later. Only one `!gps fix` can be in flight at a time; a second one gets `GPS: fix already pending`. |
| `!gps fix [seconds]` | Single-shot location: turns GPS on if it wasn't already, waits for a stabilised fix (HDOP ≤ 2.0, or ≥8 satellites on GPS hardware that doesn't report HDOP, averaged over 10s), sends the position, then restores GPS to whatever state it was in before. Replies in two parts — an immediate `GPS: acquiring fix...` ack, then the position (or `GPS: no fix (timeout)` / a partial fix) as a follow-up message up to `seconds` later (default 90s, clamped to 15-300s) — raise it under poor sky view, where 90s isn't always enough to reach the HDOP/satellite bar. Only one `!gps fix` can be in flight at a time; a second one gets `GPS: fix already pending`. |
| `!advert` | Sends an advert immediately, same as the Home page's manual advert action. |
Actions combine with Commands and each other in one message the same way — `!batt !gps on` answers with `4.10V | GPS: on` in a single reply. With Actions OFF for a target, `!buzz`/`!gps`/`!gps fix`/`!advert` are silently ignored (no reply, no effect) exactly like any other unrecognised command, and `!help`'s reply doesn't mention them.