diff --git a/examples/companion_radio/main.cpp b/examples/companion_radio/main.cpp
index d257964f..8573e50d 100644
--- a/examples/companion_radio/main.cpp
+++ b/examples/companion_radio/main.cpp
@@ -15,6 +15,16 @@
 static bool g_sim_ready = false;
 #endif
 
+#ifdef DISPLAY_HAS_BUSY_PUMP
+// Run from the e-ink driver's BUSY-pin wait (DisplayDriver::setBusyPumpFn(),
+// wired in setup() below) so packets landing during a refresh are pulled off
+// the radio as they arrive, and a TX that finishes mid-refresh goes straight
+// back to listening -- see RadioLibWrapper::pumpRecvDuringBlockingWait().
+static void pumpRadioDuringDisplayBusyWait(void*) {
+  radio_driver.pumpRecvDuringBlockingWait();
+}
+#endif
+
 // Believe it or not, this std C function is busted on some platforms!
 static uint32_t _atoi(const char* sp) {
   uint32_t n = 0;
@@ -293,6 +303,9 @@ void setup() {
   if (disp && the_mesh.getNodePrefs())
     disp->setBrightness(the_mesh.getNodePrefs()->display_brightness);
   ui_task.begin(disp, &sensors, the_mesh.getNodePrefs());  // still want to pass this in as dependency, as prefs might be moved
+#ifdef DISPLAY_HAS_BUSY_PUMP
+  if (disp) disp->setBusyPumpFn(pumpRadioDuringDisplayBusyWait, nullptr);
+#endif
 #endif
 
 #ifdef NRF52_PLATFORM
diff --git a/src/helpers/radiolib/CustomLLCC68Wrapper.h b/src/helpers/radiolib/CustomLLCC68Wrapper.h
index ae0fe0a2..8180b088 100644
--- a/src/helpers/radiolib/CustomLLCC68Wrapper.h
+++ b/src/helpers/radiolib/CustomLLCC68Wrapper.h
@@ -26,8 +26,8 @@ public:
   float getCurrentRSSI() override {
     return ((CustomLLCC68 *)_radio)->getRSSI(false);
   }
-  float getLastRSSI() const override { return ((CustomLLCC68 *)_radio)->getRSSI(); }
-  float getLastSNR() const override { return ((CustomLLCC68 *)_radio)->getSNR(); }
+  float readLiveRSSI() const override { return ((CustomLLCC68 *)_radio)->getRSSI(); }
+  float readLiveSNR() const override { return ((CustomLLCC68 *)_radio)->getSNR(); }
 
   float packetScore(float snr, int packet_len) override {
     int sf = ((CustomLLCC68 *)_radio)->spreadingFactor;
diff --git a/src/helpers/radiolib/CustomLR1110Wrapper.h b/src/helpers/radiolib/CustomLR1110Wrapper.h
index e7aaeb93..fdcaad7e 100644
--- a/src/helpers/radiolib/CustomLR1110Wrapper.h
+++ b/src/helpers/radiolib/CustomLR1110Wrapper.h
@@ -38,8 +38,8 @@ public:
     _radio->setPreambleLength(preambleLengthForSF(getSpreadingFactor())); // overcomes weird issues with small and big pkts
   }
 
-  float getLastRSSI() const override { return ((CustomLR1110 *)_radio)->getRSSI(); }
-  float getLastSNR() const override { return ((CustomLR1110 *)_radio)->getSNR(); }
+  float readLiveRSSI() const override { return ((CustomLR1110 *)_radio)->getRSSI(); }
+  float readLiveSNR() const override { return ((CustomLR1110 *)_radio)->getSNR(); }
 
   uint8_t getSpreadingFactor() const override { return ((CustomLR1110 *)_radio)->getSpreadingFactor(); }
   
diff --git a/src/helpers/radiolib/CustomLR2021Wrapper.h b/src/helpers/radiolib/CustomLR2021Wrapper.h
index 8299e2bf..6b3b5f46 100644
--- a/src/helpers/radiolib/CustomLR2021Wrapper.h
+++ b/src/helpers/radiolib/CustomLR2021Wrapper.h
@@ -88,8 +88,8 @@ public:
     _radio->setPreambleLength(preambleLengthForSF(getSpreadingFactor())); // overcomes weird issues with small and big pkts
   }
 
-  float getLastRSSI() const override { return ((CustomLR2021 *)_radio)->getRSSI(); }
-  float getLastSNR() const override { return ((CustomLR2021 *)_radio)->getSNR(); }
+  float readLiveRSSI() const override { return ((CustomLR2021 *)_radio)->getRSSI(); }
+  float readLiveSNR() const override { return ((CustomLR2021 *)_radio)->getSNR(); }
 
   uint8_t getSpreadingFactor() const override { return ((CustomLR2021 *)_radio)->getSpreadingFactor(); }
   
diff --git a/src/helpers/radiolib/CustomSTM32WLxWrapper.h b/src/helpers/radiolib/CustomSTM32WLxWrapper.h
index a4ba4971..4b537814 100644
--- a/src/helpers/radiolib/CustomSTM32WLxWrapper.h
+++ b/src/helpers/radiolib/CustomSTM32WLxWrapper.h
@@ -26,8 +26,8 @@ public:
   float getCurrentRSSI() override {
     return ((CustomSTM32WLx *)_radio)->getRSSI(false);
   }
-  float getLastRSSI() const override { return ((CustomSTM32WLx *)_radio)->getRSSI(); }
-  float getLastSNR() const override { return ((CustomSTM32WLx *)_radio)->getSNR(); }
+  float readLiveRSSI() const override { return ((CustomSTM32WLx *)_radio)->getRSSI(); }
+  float readLiveSNR() const override { return ((CustomSTM32WLx *)_radio)->getSNR(); }
 
   float packetScore(float snr, int packet_len) override {
     int sf = ((CustomSTM32WLx *)_radio)->spreadingFactor;
diff --git a/src/helpers/radiolib/CustomSX1262Wrapper.h b/src/helpers/radiolib/CustomSX1262Wrapper.h
index 13edda03..839eaef2 100644
--- a/src/helpers/radiolib/CustomSX1262Wrapper.h
+++ b/src/helpers/radiolib/CustomSX1262Wrapper.h
@@ -42,8 +42,8 @@ public:
   float getCurrentRSSI() override {
     return ((CustomSX1262 *)_radio)->getRSSI(false);
   }
-  float getLastRSSI() const override { return ((CustomSX1262 *)_radio)->getRSSI(); }
-  float getLastSNR() const override { return ((CustomSX1262 *)_radio)->getSNR(); }
+  float readLiveRSSI() const override { return ((CustomSX1262 *)_radio)->getRSSI(); }
+  float readLiveSNR() const override { return ((CustomSX1262 *)_radio)->getSNR(); }
 
   float packetScore(float snr, int packet_len) override {
     int sf = ((CustomSX1262 *)_radio)->spreadingFactor;
diff --git a/src/helpers/radiolib/CustomSX1268Wrapper.h b/src/helpers/radiolib/CustomSX1268Wrapper.h
index 70f5dabd..be1eec40 100644
--- a/src/helpers/radiolib/CustomSX1268Wrapper.h
+++ b/src/helpers/radiolib/CustomSX1268Wrapper.h
@@ -29,8 +29,8 @@ public:
   float getCurrentRSSI() override {
     return ((CustomSX1268 *)_radio)->getRSSI(false);
   }
-  float getLastRSSI() const override { return ((CustomSX1268 *)_radio)->getRSSI(); }
-  float getLastSNR() const override { return ((CustomSX1268 *)_radio)->getSNR(); }
+  float readLiveRSSI() const override { return ((CustomSX1268 *)_radio)->getRSSI(); }
+  float readLiveSNR() const override { return ((CustomSX1268 *)_radio)->getSNR(); }
 
   float packetScore(float snr, int packet_len) override {
     int sf = ((CustomSX1268 *)_radio)->spreadingFactor;
diff --git a/src/helpers/radiolib/CustomSX1276Wrapper.h b/src/helpers/radiolib/CustomSX1276Wrapper.h
index 9d75ce12..525e2ad8 100644
--- a/src/helpers/radiolib/CustomSX1276Wrapper.h
+++ b/src/helpers/radiolib/CustomSX1276Wrapper.h
@@ -25,8 +25,8 @@ public:
   float getCurrentRSSI() override {
     return ((CustomSX1276 *)_radio)->getRSSI(false);
   }
-  float getLastRSSI() const override { return ((CustomSX1276 *)_radio)->getRSSI(); }
-  float getLastSNR() const override { return ((CustomSX1276 *)_radio)->getSNR(); }
+  float readLiveRSSI() const override { return ((CustomSX1276 *)_radio)->getRSSI(); }
+  float readLiveSNR() const override { return ((CustomSX1276 *)_radio)->getSNR(); }
 
   float packetScore(float snr, int packet_len) override {
     int sf = ((CustomSX1276 *)_radio)->spreadingFactor;
diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp
index d17d5777..33847a18 100644
--- a/src/helpers/radiolib/RadioLibWrappers.cpp
+++ b/src/helpers/radiolib/RadioLibWrappers.cpp
@@ -253,6 +253,23 @@ bool RadioLibWrapper::isInRecvMode() const {
 }
 
 int RadioLibWrapper::recvRaw(uint8_t* bytes, int sz) {
+  if (_pump_count > 0) {
+    // pumpRecvDuringBlockingWait() already pulled this off the chip while
+    // the main loop was stuck (e-ink refresh) -- hand over the staged copy.
+    // Any packet that has landed since stays flagged and is read live once
+    // the queue is empty.
+    uint8_t slot = _pump_head;
+    int len = _pump_len[slot];
+    if (len > sz) len = sz;
+    memcpy(bytes, _pump_data[slot], len);
+    _pumped_pop_snr = _pump_snr[slot];
+    _pumped_pop_rssi = _pump_rssi[slot];
+    _last_recv_was_pumped = true;
+    _pump_head = (_pump_head + 1) % PUMP_QUEUE_SIZE;
+    _pump_count--;
+    return len;
+  }
+
   int len = 0;
   if (state & STATE_INT_READY) {
     len = _radio->getPacketLength();
@@ -268,6 +285,7 @@ int RadioLibWrapper::recvRaw(uint8_t* bytes, int sz) {
         n_recv++;
       }
     }
+    _last_recv_was_pumped = false;
     #if defined(USE_LR2021)
     state = STATE_RX;     // LR2021 stays in Rx after readData, calling startReceive while still in Rx throws -706 errors
     #else
@@ -281,6 +299,49 @@ int RadioLibWrapper::recvRaw(uint8_t* bytes, int sz) {
   return len;
 }
 
+// See the class comment in RadioLibWrappers.h. STATE_INT_READY is shared by
+// the TX-done and RX-done interrupts, so the base state disambiguates them;
+// anything else (mid-TX, idle) is left alone.
+void RadioLibWrapper::pumpRecvDuringBlockingWait() {
+  if (state == (uint8_t)(STATE_TX_WAIT | STATE_INT_READY)) {
+    // After TX_DONE the chip falls back to standby: deaf until the main loop
+    // reaches isSendComplete()/onSendFinished(). Do the radio side of
+    // onSendFinished() now and go straight back to RX; those two then only
+    // report it (see _tx_done_early).
+    _radio->finishTransmit();
+    _board->onAfterTransmit();
+    n_sent++;
+    _tx_done_early = true;
+    state = STATE_IDLE;
+    armRecv();
+    return;
+  }
+  if (state != (uint8_t)(STATE_RX | STATE_INT_READY)) return;
+  if (_pump_count >= PUMP_QUEUE_SIZE) return;   // staging full -- let the main loop drain it via recvRaw() first
+
+  uint8_t slot = (_pump_head + _pump_count) % PUMP_QUEUE_SIZE;
+  int len = _radio->getPacketLength();
+  if (len > 0) {
+    if (len > MAX_TRANS_UNIT) len = MAX_TRANS_UNIT;
+    int err = _radio->readData(_pump_data[slot], len);
+    if (err == RADIOLIB_ERR_NONE) {
+      _pump_len[slot] = (uint8_t)len;
+      _pump_snr[slot] = readLiveSNR();
+      _pump_rssi[slot] = readLiveRSSI();
+      _pump_count++;
+      n_recv++;
+    } else {
+      n_recv_errors++;
+    }
+  }
+  #if defined(USE_LR2021)
+  state = STATE_RX;
+  #else
+  state = STATE_IDLE;
+  #endif
+  armRecv();
+}
+
 uint32_t RadioLibWrapper::getEstAirtimeFor(int len_bytes) {
   return _radio->getTimeOnAir(len_bytes) / 1000;
 }
@@ -299,6 +360,9 @@ bool RadioLibWrapper::startSendRaw(const uint8_t* bytes, int len) {
 }
 
 bool RadioLibWrapper::isSendComplete() {
+  // Already finished by pumpRecvDuringBlockingWait(): state now belongs to
+  // the re-armed RX (and may flag a newly received packet), so don't touch it.
+  if (_tx_done_early) return true;
   if (state & STATE_INT_READY) {
     state = STATE_IDLE;
     n_sent++;
@@ -308,6 +372,10 @@ bool RadioLibWrapper::isSendComplete() {
 }
 
 void RadioLibWrapper::onSendFinished() {
+  if (_tx_done_early) {
+    _tx_done_early = false;
+    return;
+  }
   _radio->finishTransmit();
   _board->onAfterTransmit();
   state = STATE_IDLE;
@@ -336,10 +404,13 @@ bool RadioLibWrapper::isChannelActive() {
 }
 
 float RadioLibWrapper::getLastRSSI() const {
-  return _radio->getRSSI();
+  // A packet handed back via the pump-queue path (recvRaw()) needs the
+  // reading captured when it was pulled off the chip, not whatever's newest
+  // in the registers now -- see the field comments in RadioLibWrappers.h.
+  return _last_recv_was_pumped ? _pumped_pop_rssi : readLiveRSSI();
 }
 float RadioLibWrapper::getLastSNR() const {
-  return _radio->getSNR();
+  return _last_recv_was_pumped ? _pumped_pop_snr : readLiveSNR();
 }
 
 float RadioLibWrapper::packetScoreInt(float snr, int sf, int packet_len) {
diff --git a/src/helpers/radiolib/RadioLibWrappers.h b/src/helpers/radiolib/RadioLibWrappers.h
index 2302bec2..33a0dc1b 100644
--- a/src/helpers/radiolib/RadioLibWrappers.h
+++ b/src/helpers/radiolib/RadioLibWrappers.h
@@ -89,6 +89,47 @@ protected:
   // firmware defaults (frequency/bandwidth/SF/CR/TX power/preamble/gain).
   virtual bool radioHardReset() { return false; }
 
+  // --- Busy-wait packet pump (see pumpRecvDuringBlockingWait() below) ---
+  // A display driver's e-ink busy-wait can block the main loop for over a
+  // second per refresh (GxEPD2 setBusyCallback()). The radio stays in
+  // continuous RX meanwhile, but only the latest packet is readable: the
+  // chip reports a single length/offset, so if a second packet completes
+  // before the loop gets back to recvRaw(), the first is lost -- and IRQ
+  // flags are sticky, so a later CRC-failed packet makes readData() reject
+  // a good one still waiting. pumpRecvDuringBlockingWait() pulls each packet
+  // into this small staging queue as it lands, deliberately WITHOUT touching
+  // packet parsing/dispatch (Dispatcher::checkRecv() does that later, back
+  // on the main loop) -- reaching into routing/UI from here would reenter
+  // the very display code that's blocked calling us.
+  // A TX finishing mid-refresh is worse: after TX_DONE the chip falls back to
+  // standby and hears nothing at all until re-armed -- so the pump also
+  // finishes the TX and resumes RX right away.
+  static const uint8_t PUMP_QUEUE_SIZE = 2;
+  uint8_t _pump_data[PUMP_QUEUE_SIZE][MAX_TRANS_UNIT];
+  uint8_t _pump_len[PUMP_QUEUE_SIZE];
+  float   _pump_snr[PUMP_QUEUE_SIZE];
+  float   _pump_rssi[PUMP_QUEUE_SIZE];
+  uint8_t _pump_count = 0, _pump_head = 0;
+  // Set whenever recvRaw() hands back a packet that pumpRecvDuringBlockingWait()
+  // already pulled off the chip, so getLastRSSI()/getLastSNR() (below) report
+  // the reading captured at THAT read -- not whatever's newest in the chip's
+  // registers if another packet has landed (live or pumped) since.
+  bool  _last_recv_was_pumped = false;
+  float _pumped_pop_snr = 0, _pumped_pop_rssi = 0;
+  // The pump already did onSendFinished()'s radio work and re-armed RX, so
+  // isSendComplete() reports done and onSendFinished() skips the radio part
+  // (it would drop the chip back to standby and clobber a pending RX flag).
+  // A subclass onSendFinished() extension then runs with RX already armed.
+  bool  _tx_done_early = false;
+
+  // Chip-specific SNR/RSSI register reads. Implemented per radio type
+  // (renamed from what used to be each subclass's getLastRSSI()/getLastSNR()
+  // override) so the base class can route getLastRSSI()/getLastSNR() through
+  // the pumped-packet cache above instead of every subclass needing to know
+  // about it.
+  virtual float readLiveRSSI() const = 0;
+  virtual float readLiveSNR() const = 0;
+
 public:
   RadioLibWrapper(PhysicalLayer& radio, mesh::MainBoard& board) : _radio(&radio), _board(&board), _preamble_sf(0) { n_recv = n_sent = 0; }
 
@@ -144,6 +185,12 @@ public:
 
   void loop() override;
 
+  // Called only from a display driver's busy-wait callback (see
+  // DisplayDriver::setBusyPumpFn()) while the main loop is blocked -- see
+  // the class comment above. Never call this from anywhere that could end
+  // up back inside display/UI code.
+  void pumpRecvDuringBlockingWait();
+
   uint32_t getPacketsRecv() const { return n_recv; }
   uint32_t getPacketsRecvErrors() const { return n_recv_errors; }
   uint32_t getPacketsSent() const { return n_sent; }
diff --git a/src/helpers/ui/DisplayDriver.h b/src/helpers/ui/DisplayDriver.h
index dc055841..75cd19c3 100644
--- a/src/helpers/ui/DisplayDriver.h
+++ b/src/helpers/ui/DisplayDriver.h
@@ -30,6 +30,14 @@ protected:
   unsigned long _marquee_next_at = 0;
   DisplayDriver(int w, int h) { _w = w; _h = h; }
   void setDimensions(int w, int h) { _w = w; _h = h; }
+
+  // Registered via setBusyPumpFn() below; drivers whose underlying vendor
+  // library exposes a hook for its blocking hardware wait (e.g. GxEPD2's
+  // setBusyCallback()) call this from it. Default no-op, so any driver/board
+  // that never wires one up behaves exactly as before.
+  void (*_busy_pump_fn)(void*) = nullptr;
+  void* _busy_pump_ctx = nullptr;
+  void callBusyPump() { if (_busy_pump_fn) _busy_pump_fn(_busy_pump_ctx); }
 public:
   enum Color { DARK=0, LIGHT, RED, GREEN, BLUE, YELLOW, ORANGE }; // on b/w screen, colors will be !=0 synonym of light
 
@@ -499,6 +507,14 @@ public:
   virtual void setFullRefreshInterval(uint8_t n) { }  // e-ink: do full refresh every n partial refreshes (0=never)
   virtual void endFrame() = 0;
 
+  // Called from board setup to run safe background work during a blocking
+  // hardware wait (currently: an e-ink panel's BUSY-pin poll, which can run
+  // for over a second on a full refresh and would otherwise stall the whole
+  // main loop -- see RadioLibWrapper::pumpRecvDuringBlockingWait(), the
+  // motivating use). fn must not touch this display or any UI state: it can
+  // run reentrantly, nested inside the very call it's servicing.
+  void setBusyPumpFn(void (*fn)(void*), void* ctx) { _busy_pump_fn = fn; _busy_pump_ctx = ctx; }
+
 #ifdef ENABLE_SCREENSHOT
   // Screenshot support — return raw framebuffer and its size in bytes.
   // 0=OLED (page-based, column-major), 1=e-ink (row-major, MSB-first, 1=white/0=black).
diff --git a/src/helpers/ui/GxEPDDisplay.cpp b/src/helpers/ui/GxEPDDisplay.cpp
index 099668d6..3a0a86d4 100644
--- a/src/helpers/ui/GxEPDDisplay.cpp
+++ b/src/helpers/ui/GxEPDDisplay.cpp
@@ -84,6 +84,10 @@ bool GxEPDDisplay::begin() {
   SPI1.begin();
 #endif
   display.init(115200, true, 2, false);
+  // Runs ~every 1ms while _waitWhileBusy() polls the panel's BUSY pin, i.e.
+  // for as long as a refresh blocks the main loop. See busyCallbackTrampoline
+  // and callBusyPump()/setBusyPumpFn() (DisplayDriver.h).
+  display.epd2.setBusyCallback(busyCallbackTrampoline, this);
   display.setRotation(DISPLAY_ROTATION);
   setTextSize(1);
   display.setPartialWindow(0, 0, display.width(), display.height());
diff --git a/src/helpers/ui/GxEPDDisplay.h b/src/helpers/ui/GxEPDDisplay.h
index 3d92f4eb..f99bd612 100644
--- a/src/helpers/ui/GxEPDDisplay.h
+++ b/src/helpers/ui/GxEPDDisplay.h
@@ -24,6 +24,11 @@
 #include "DisplayDriver.h"
 #include "MiscFixedFont.h"
 
+// This driver calls callBusyPump() during its BUSY-pin waits; app code keys
+// its setBusyPumpFn() wiring off this so it isn't compiled for displays (or
+// the sim, whose radio isn't a RadioLibWrapper) that never would.
+#define DISPLAY_HAS_BUSY_PUMP 1
+
 #ifndef DISPLAY_ROTATION
   #define DISPLAY_ROTATION 0
 #endif
@@ -68,6 +73,18 @@ class GxEPDDisplay : public DisplayDriver {
   uint8_t glyphXAdvance(uint32_t cp, int sc);
   int scale() const { return (width() >= height()) ? 2 : 1; }
 
+  // GxEPD2_EPD::setBusyCallback() wants a plain function pointer with a
+  // void* param, not a member function -- this trampolines back into the
+  // instance so callBusyPump() (DisplayDriver.h) can reach whatever board
+  // setup registered via setBusyPumpFn(). _waitWhileBusy() calls the callback
+  // *instead of* its own delay(1), so keep that delay here: without it the
+  // wait becomes a hard spin that starves the RTOS idle task (no CPU sleep)
+  // and equal-priority tasks for the whole refresh.
+  static void busyCallbackTrampoline(const void* param) {
+    ((GxEPDDisplay*)param)->callBusyPump();
+    delay(1);
+  }
+
 public:
 #if defined(EINK_DISPLAY_MODEL)
   GxEPDDisplay() : DisplayDriver(EINK_DISP_W, EINK_DISP_H),