fix(station-g3): expose FEM gain preferences

src/MeshCore.h

@@ -67,6 +67,10 @@ public:
   virtual bool setLoRaFemLnaEnabled(bool enable) { return false; }
   virtual bool canControlLoRaFemLna() const { return false; }
   virtual bool isLoRaFemLnaEnabled() const { return false; }
+  // Software-selectable external FEM transmit gain. This is not a PA power switch.
+  virtual bool setLoRaFemPaGainEnabled(bool enable) { return false; }
+  virtual bool canControlLoRaFemPaGain() const { return false; }
+  virtual bool isLoRaFemPaGainEnabled() const { return false; }
 
   // Power management interface (boards with power management override these)
   virtual bool isExternalPowered() { return false; }

src/helpers/CommonCLI.cpp

@@ -102,7 +102,8 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {  // Legacy
     file.read((uint8_t *)&_prefs->flood_max_advert, sizeof(_prefs->flood_max_advert));             // 292
     file.read((uint8_t *)&_prefs->radio_fem_rxgain, sizeof(_prefs->radio_fem_rxgain));             // 293
     file.read((uint8_t *)&_prefs->cad_enabled, sizeof(_prefs->cad_enabled));                       // 294
-    // next: 295
+    file.read((uint8_t *)&_prefs->radio_fem_txgain, sizeof(_prefs->radio_fem_txgain));             // 295
+    // next: 296
 
     // sanitise bad pref values
     _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
@@ -133,6 +134,7 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {  // Legacy
     // sanitise settings
     _prefs->rx_boosted_gain = constrain(_prefs->rx_boosted_gain, 0, 1); // boolean
     _prefs->radio_fem_rxgain = constrain(_prefs->radio_fem_rxgain, 0, 1); // boolean
+    _prefs->radio_fem_txgain = constrain(_prefs->radio_fem_txgain, 0, 1); // boolean
     _prefs->cad_enabled = constrain(_prefs->cad_enabled, 0, 1); // boolean
 
     file.close();
@@ -562,6 +564,28 @@ void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* rep
     } else {
       strcpy(reply, "Error: state must be on or off");
     }
+  } else if (memcmp(config, "radio.fem.txgain ", 17) == 0) {
+    if (!_board->canControlLoRaFemPaGain()) {
+      strcpy(reply, "Error: unsupported");
+    } else if (memcmp(&config[17], "on", 2) == 0) {
+      if (_board->setLoRaFemPaGainEnabled(true)) {
+        _prefs->radio_fem_txgain = 1;
+        savePrefs();
+        strcpy(reply, "OK - LoRa FEM TX gain on");
+      } else {
+        strcpy(reply, "Error: failed to apply LoRa FEM TX gain");
+      }
+    } else if (memcmp(&config[17], "off", 3) == 0) {
+      if (_board->setLoRaFemPaGainEnabled(false)) {
+        _prefs->radio_fem_txgain = 0;
+        savePrefs();
+        strcpy(reply, "OK - LoRa FEM TX gain off");
+      } else {
+        strcpy(reply, "Error: failed to apply LoRa FEM TX gain");
+      }
+    } else {
+      strcpy(reply, "Error: state must be on or off");
+    }
   } else if (memcmp(config, "radio ", 6) == 0) {
     strcpy(tmp, &config[6]);
     const char *parts[4];
@@ -827,6 +851,12 @@ void CommonCLI::handleGetCmd(uint32_t sender_timestamp, char* command, char* rep
     } else {
       sprintf(reply, "> %s", _board->isLoRaFemLnaEnabled() ? "on" : "off");
     }
+  } else if (memcmp(config, "radio.fem.txgain", 16) == 0) {
+    if (!_board->canControlLoRaFemPaGain()) {
+      strcpy(reply, "Error: unsupported");
+    } else {
+      sprintf(reply, "> %s", _board->isLoRaFemPaGainEnabled() ? "on" : "off");
+    }
   } else if (memcmp(config, "radio", 5) == 0) {
     char freq[16], bw[16];
     strcpy(freq, StrHelper::ftoa(_prefs->freq));

src/helpers/CommonCLI.h

@@ -65,6 +65,7 @@ public:
   char owner_info[120];
   uint8_t rx_boosted_gain = 0; // power settings
   uint8_t radio_fem_rxgain = 0; // LoRa FEM RX gain setting
+  uint8_t radio_fem_txgain = 0; // LoRa FEM TX gain setting
   uint8_t path_hash_mode = 0;   // which path mode to use when sending
   uint8_t loop_detect = 0;
   uint8_t cad_enabled = 0;      // hardware Channel Activity Detection before TX (boolean)
@@ -82,7 +83,8 @@ private:
       def("cad", _parent->cad_enabled);
       def("int_thr", _parent->interference_threshold);
       def("rxgain", _parent->rx_boosted_gain);
-      def("fem_rxgain", _parent->rx_boosted_gain);
+      def("fem_rxgain", _parent->radio_fem_rxgain);
+      def("fem_txgain", _parent->radio_fem_txgain);
       def("tx", _parent->tx_power_dbm);
       def("af", _parent->airtime_factor);
       def("rxdelay", _parent->rx_delay_base);