feat(repeater): politeness controls, dedicated radio profile, and diagnostics

Settings > Radio gains a repeater toggle, 16 community-suggested radio
presets plus manual Freq/SF/BW/CR tuning (digit-by-digit Freq editor),
4 persisted user preset slots, and the packet pool bumped 16->32 so
queued retransmits stop starving incoming-packet allocation while
relaying.

Four opt-in politeness knobs (skip-advert, max-hops, yield, min-SNR),
all flood-only and off by default, plus overhear suppression that
cancels a queued retransmit if a peer relays the same packet first.
Adaptive Power Control is suppressed while relaying (pins TX power to
the ceiling) and duty-cycle RX is forced off, since a repeater needs
to hear and relay at consistent power.

A dedicated Tools > Repeater screen consolidates the toggle, the
politeness knobs, and live forwarding stats, plus an optional "Custom"
radio profile — a dedicated frequency/SF/BW/CR for relaying, separate
from the companion's own network, band-matched to the companion
frequency by default and used everywhere a radio change can happen
(boot, on-device toggle, app-driven CMD_SET_RADIO_PARAMS, Settings
radio edits) so the device never silently falls back to the wrong
params mid-relay.

Diagnostics gains the actually-forwarded packet count, real heap-free
via mallinfo(), a reset-counters popup, and hardened loop-detect
bounds. Also: a frequency-floor fix and a float-equality preset-match
fix in the repeater profile logic, deduped BW-table/valCol/profile-
seeding helpers shared between Settings and the Repeater screen, and
a build.sh fix tolerating control characters in `pio project config`'s
JSON dump.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

src/helpers/radiolib/CustomSX1262Wrapper.h

@@ -20,6 +20,9 @@ public:
     updatePreamble(sf);
   }
 
+  // From RadioLib's SX1262::setFrequency(): RADIOLIB_CHECK_RANGE(freq, 150.0f, 960.0f, ...).
+  void getFreqBounds(float& min_mhz, float& max_mhz) const override { min_mhz = 150.0f; max_mhz = 960.0f; }
+
   bool isReceivingPacket() override { 
     return ((CustomSX1262 *)_radio)->isReceiving();
   }

src/helpers/radiolib/RadioLibWrappers.h

@@ -56,6 +56,13 @@ public:
   }
 
   virtual void setParams(float freq, float bw, uint8_t sf, uint8_t cr) = 0;
+  // RadioLib's own setFrequency() silently rejects values outside the chip's
+  // validated range and leaves the radio retuned to its previous frequency —
+  // setParams() above doesn't check that return code, so the UI clamps to this
+  // instead of letting NodePrefs drift out of sync with the actual radio.
+  // Default is the generic sanity bound the app's CMD_SET_RADIO_PARAMS already
+  // uses; chips with a narrower RadioLib-validated range override it.
+  virtual void getFreqBounds(float& min_mhz, float& max_mhz) const { min_mhz = 150.0f; max_mhz = 2500.0f; }
   uint32_t getRngSeed();
   void setTxPower(int8_t dbm);
   int8_t getTxPower() const { return _tx_dbm; }   // actual current power (reflects APC)