Fixed hibernate/powerOff for ESP32 boards to stay at uA

This commit is contained in:
Kevin Le
2026-07-05 23:47:27 +07:00
parent 6b205da4e9
commit 35f654ced3
23 changed files with 50 additions and 418 deletions
-27
View File
@@ -20,33 +20,6 @@ void HeltecE213Board::begin() {
}
}
void HeltecE213Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
if (pin_wake_btn < 0) {
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
} else {
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
}
if (secs > 0) {
esp_sleep_enable_timer_wakeup(secs * 1000000);
}
// Finally set ESP32 into sleep
esp_deep_sleep_start(); // CPU halts here and never returns!
}
void HeltecE213Board::powerOff() {
enterDeepSleep(0);
}
uint16_t HeltecE213Board::getBattMilliVolts() {
analogReadResolution(10);
digitalWrite(PIN_ADC_CTRL, HIGH);
-3
View File
@@ -3,7 +3,6 @@
#include <Arduino.h>
#include <helpers/RefCountedDigitalPin.h>
#include <helpers/ESP32Board.h>
#include <driver/rtc_io.h>
class HeltecE213Board : public ESP32Board {
@@ -13,8 +12,6 @@ public:
HeltecE213Board() : periph_power(PIN_VEXT_EN,PIN_VEXT_EN_ACTIVE) { }
void begin();
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1);
void powerOff() override;
uint16_t getBattMilliVolts() override;
const char* getManufacturerName() const override ;
};