Fixed hibernate/powerOff for ESP32 boards to stay at uA

variants/lilygo_tdeck/TDeckBoard.h

@@ -3,7 +3,6 @@
 #include <Wire.h>
 #include <Arduino.h>
 #include "helpers/ESP32Board.h"
-#include <driver/rtc_io.h>
 
 #define PIN_VBAT_READ 4
 #define BATTERY_SAMPLES 8
@@ -23,29 +22,6 @@ public:
     }
   #endif
 
-  void enterDeepSleep(uint32_t secs, int pin_wake_btn) {
-    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
-
-    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
-    rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
-    rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
-
-    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
-
-    if (pin_wake_btn < 0) {
-      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
-    } else {
-      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
-    }
-
-    if (secs > 0) {
-      esp_sleep_enable_timer_wakeup(secs * 1000000);
-    }
-
-    // Finally set ESP32 into sleep
-    esp_deep_sleep_start(); // CPU halts here and never returns!
-  }
-
   uint16_t getBattMilliVolts() {
     #if defined(PIN_VBAT_READ) && defined(ADC_MULTIPLIER)
       analogReadResolution(12);