Merge upstream companion-v1.17.1 into power-saving

Pulls in real fixes: scoped-reply routing, RX boosted-gain restored
correctly after AGC reset, T-Echo Lite/Card SPI pin corrections
(unused pins now map to NRFX_SPIM_PIN_NOT_USED via 0 instead of -1)
and TCXO voltage fix, Heltec T096/T1 and MeshPocket pin fixes,
T-beam Supreme S3 display fix, LR2021 preamble/IRQ timeout handling.

None of the touched variants overlap with our active Heltec V3/V4,
Cardputer ADV, GAT562, or WioTracker builds.

# Conflicts:
#	examples/companion_radio/MyMesh.cpp
#	examples/companion_radio/MyMesh.h
#	examples/companion_radio/NodePrefs.h
#	src/helpers/radiolib/CustomSX1262Wrapper.h
#	src/helpers/radiolib/RadioLibWrappers.cpp
#	src/helpers/ui/SH1106Display.cpp
#	variants/lilygo_techo_lite/platformio.ini
#	variants/lilygo_techo_lite/variant.h

examples/companion_radio/MyMesh.cpp

@@ -1608,6 +1608,8 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
   seedDefaultRepeaterProfile(_prefs);
   _prefs.gps_enabled = 0;       // GPS disabled by default
   _prefs.gps_interval = 0;      // No automatic GPS updates by default
+  _prefs.radio_fem_rxgain = 1;
+  _prefs.radio_fem_txgain = 0;
   _prefs.display_brightness = 2; // medium brightness by default
   _prefs.buzzer_volume = 4;      // max volume by default
   _prefs.ringtone_bpm_idx = 2;   // 120 bpm default
@@ -1729,6 +1731,8 @@ void MyMesh::begin(bool has_display) {
   applyApc();                                         // sets TX power to the ceiling and arms APC if enabled
   radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
   radio_driver.setPowerSaving(_prefs.rx_powersave && !_prefs.client_repeat);   // duty-cycle RX off while repeating (must hear all traffic)
+  board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);
+  board.setLoRaFemPaGainEnabled(_prefs.radio_fem_txgain);
   MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s",
                      radio_driver.getRxBoostedGainMode() ? "Enabled" : "Disabled");
 }

examples/companion_radio/MyMesh.h

@@ -12,7 +12,7 @@ class UITask;
 #define FIRMWARE_VER_CODE 13
 
 #ifndef FIRMWARE_BUILD_DATE
-#define FIRMWARE_BUILD_DATE "12 Aug 2026"
+#define FIRMWARE_BUILD_DATE "14 Aug 2026"
 #endif
 
 // Fallback only -- every real build (local or CI) goes through build.sh, which

examples/companion_radio/NodePrefs.h

@@ -65,6 +65,14 @@ struct NodePrefs {  // persisted to file
   uint32_t gps_interval;     // GPS duty-cycle sleep window in seconds (0 = disabled, GPS stays continuous)
   uint8_t autoadd_config;    // bitmask for auto-add contacts config
   uint8_t rx_boosted_gain; // SX126x RX boosted gain mode (0=power saving, 1=boosted)
+  // External LoRa FEM gain (LNA/PA), from upstream companion-v1.17.1 —
+  // board-level only right now (BaseCustomBoard::setLoRaFemLnaEnabled/
+  // PaGainEnabled, both default no-op false), no companion CLI/UI to set
+  // these yet, so — matching upstream's own decision — NOT persisted here:
+  // always reset to the constructor default (MyMesh.cpp) on boot. Not part
+  // of the DataStore save/load tripwire below.
+  uint8_t radio_fem_rxgain;
+  uint8_t radio_fem_txgain;
   uint8_t client_repeat;
   uint8_t path_hash_mode;    // which path mode to use when sending
   uint8_t autoadd_max_hops;  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)

examples/simple_repeater/MyMesh.cpp

@@ -411,24 +411,31 @@ bool MyMesh::isLooped(const mesh::Packet* packet, const uint8_t max_counters[])
 }
 
 void MyMesh::sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size) {
-  if (recv_pkt_region && !recv_pkt_region->isWildcard()) {  // if _request_ packet scope is known, send reply with same scope
-    TransportKey scope;
-    if (region_map.getTransportKeysFor(*recv_pkt_region, &scope, 1) > 0) {
-      sendFloodScoped(scope, packet, delay_millis, path_hash_size);
-    } else {
+  TransportKey req_scope;
+  bool is_wildcard = recv_pkt_region != NULL && recv_pkt_region->isWildcard();
+  bool req_scope_known = recv_pkt_region != NULL && !is_wildcard
+                      && region_map.getTransportKeysFor(*recv_pkt_region, &req_scope, 1) > 0;
+
+  switch (mesh::chooseReplyScope(req_scope_known, is_wildcard, !default_scope.isNull())) {
+    case mesh::REPLY_SCOPE_REQUEST:
+      sendFloodScoped(req_scope, packet, delay_millis, path_hash_size);   // reply with same scope as request
+      break;
+    case mesh::REPLY_SCOPE_DEFAULT:
+      // requester's scope is unknown: DIRECT request (no transport codes), or code matched no Region.
+      // un-scoped would be dropped at hop 0 by repeaters running flood.max.unscoped=0
+      sendFloodScoped(default_scope, packet, delay_millis, path_hash_size);
+      break;
+    case mesh::REPLY_SCOPE_NONE:
       sendFlood(packet, delay_millis, path_hash_size);  // send un-scoped
-    }
-  } else {
-    sendFlood(packet, delay_millis, path_hash_size);  // send un-scoped
+      break;
   }
 }
 
 bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
   if (_prefs.disable_fwd) return false;
-  if (packet->isRouteFlood()) {
-    if (packet->getPathHashCount() >= _prefs.flood_max) return false;
-    if (packet->getRouteType() == ROUTE_TYPE_FLOOD && packet->getPathHashCount() >= _prefs.flood_max_unscoped) return false;
-    if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->getPathHashCount() >= _prefs.flood_max_advert) return false;
+  if (packet->isRouteFlood()
+      && mesh::isFloodHopLimitExceeded(packet, _prefs.flood_max, _prefs.flood_max_unscoped, _prefs.flood_max_advert)) {
+    return false;
   }
   if (packet->isRouteFlood() && recv_pkt_region == NULL) {
     MESH_DEBUG_PRINTLN("allowPacketForward: unknown transport code, or wildcard not allowed for FLOOD packet");
@@ -586,17 +593,29 @@ void MyMesh::onAnonDataRecv(mesh::Packet *packet, const uint8_t *secret, const m
 
     if (reply_len == 0) return;   // invalid request
 
-    if (packet->isRouteFlood()) {
+    // a DIRECT login can reply via the stored out_path, as onPeerDataRecv() does for REQ
+    ClientInfo* client = acl.getClient(sender.pub_key, PUB_KEY_SIZE);
+    bool have_out_path = client != NULL && client->out_path_len != OUT_PATH_UNKNOWN;
+
+    auto route = mesh::chooseReplyRoute(packet->isRouteFlood(), reply_path_len != 0xFF, have_out_path);
+
+    if (route == mesh::REPLY_ROUTE_PATH_RETURN) {
       // let this sender know path TO here, so they can use sendDirect(), and ALSO encode the response
       mesh::Packet* path = createPathReturn(sender, secret, packet->path, packet->path_len,
                                             PAYLOAD_TYPE_RESPONSE, reply_data, reply_len);
       if (path) sendFloodReply(path, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
-    } else if (reply_path_len == 0xFF) {
-      mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len);
-      if (reply) sendFloodReply(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
+      return;
+    }
+
+    mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len);
+    if (reply == NULL) return;
+
+    if (route == mesh::REPLY_ROUTE_DIRECT_SUPPLIED) {
+      sendDirect(reply, reply_path, reply_path_len, SERVER_RESPONSE_DELAY);
+    } else if (route == mesh::REPLY_ROUTE_DIRECT_OUT_PATH) {
+      sendDirect(reply, client->out_path, client->out_path_len, SERVER_RESPONSE_DELAY);
     } else {
-      mesh::Packet* reply = createDatagram(PAYLOAD_TYPE_RESPONSE, sender, secret, reply_data, reply_len);
-      if (reply) sendDirect(reply, reply_path, reply_path_len, SERVER_RESPONSE_DELAY);
+      sendFloodReply(reply, SERVER_RESPONSE_DELAY, packet->getPathHashSize());
     }
   }
 }
@@ -913,6 +932,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
 #endif
 #endif
   _prefs.radio_fem_rxgain = 1;
+  _prefs.radio_fem_txgain = 0;
 
   pending_discover_tag = 0;
   pending_discover_until = 0;
@@ -962,6 +982,7 @@ void MyMesh::begin(FILESYSTEM *fs) {
   MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s",
                      radio_driver.getRxBoostedGainMode() ? "Enabled" : "Disabled");
   board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);
+  board.setLoRaFemPaGainEnabled(_prefs.radio_fem_txgain);
 
   updateAdvertTimer();
   updateFloodAdvertTimer();

examples/simple_repeater/MyMesh.h

@@ -34,6 +34,7 @@
 #include <helpers/StatsFormatHelper.h>
 #include <helpers/TxtDataHelpers.h>
 #include <helpers/RegionMap.h>
+#include <helpers/RoutingPolicy.h>
 #include "RateLimiter.h"
 
 #ifdef WITH_BRIDGE
@@ -70,11 +71,11 @@ struct NeighbourInfo {
 };
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "9 Aug 2026"
+  #define FIRMWARE_BUILD_DATE   "14 Aug 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.17.0"
+  #define FIRMWARE_VERSION   "v1.17.1"
 #endif
 
 #define FIRMWARE_ROLE "repeater"

examples/simple_room_server/MyMesh.cpp

@@ -299,10 +299,9 @@ uint32_t MyMesh::getDirectRetransmitDelay(const mesh::Packet *packet) {
 
 bool MyMesh::allowPacketForward(const mesh::Packet *packet) {
   if (_prefs.disable_fwd) return false;
-  if (packet->isRouteFlood()) {
-    if (packet->getPathHashCount() >= _prefs.flood_max) return false;
-    if (packet->getRouteType() == ROUTE_TYPE_FLOOD && packet->getPathHashCount() >= _prefs.flood_max_unscoped) return false;
-    if (packet->getPayloadType() == PAYLOAD_TYPE_ADVERT && packet->getPathHashCount() >= _prefs.flood_max_advert) return false;
+  if (packet->isRouteFlood()
+      && mesh::isFloodHopLimitExceeded(packet, _prefs.flood_max, _prefs.flood_max_unscoped, _prefs.flood_max_advert)) {
+    return false;
   }
   return true;
 }
@@ -683,6 +682,7 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
 #endif
 #endif
   _prefs.radio_fem_rxgain = 1;
+  _prefs.radio_fem_txgain = 0;
 
   next_post_idx = 0;
   next_client_idx = 0;
@@ -726,6 +726,7 @@ void MyMesh::begin(FILESYSTEM *fs) {
   radio_driver.setTxPower(_prefs.tx_power_dbm);
   radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
   board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);
+  board.setLoRaFemPaGainEnabled(_prefs.radio_fem_txgain);
 
   updateAdvertTimer();
   updateFloodAdvertTimer();
@@ -749,15 +750,23 @@ void MyMesh::sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint3
 }
 
 void MyMesh::sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size) {
-  if (recv_pkt_region && !recv_pkt_region->isWildcard()) {  // if _request_ packet scope is known, send reply with same scope
-    TransportKey scope;
-    if (region_map.getTransportKeysFor(*recv_pkt_region, &scope, 1) > 0) {
-      sendFloodScoped(scope, packet, delay_millis, path_hash_size);
-    } else {
+  TransportKey req_scope;
+  bool is_wildcard = recv_pkt_region != NULL && recv_pkt_region->isWildcard();
+  bool req_scope_known = recv_pkt_region != NULL && !is_wildcard
+                      && region_map.getTransportKeysFor(*recv_pkt_region, &req_scope, 1) > 0;
+
+  switch (mesh::chooseReplyScope(req_scope_known, is_wildcard, !default_scope.isNull())) {
+    case mesh::REPLY_SCOPE_REQUEST:
+      sendFloodScoped(req_scope, packet, delay_millis, path_hash_size);   // reply with same scope as request
+      break;
+    case mesh::REPLY_SCOPE_DEFAULT:
+      // requester's scope is unknown: DIRECT request (no transport codes), or code matched no Region.
+      // un-scoped would be dropped at hop 0 by repeaters running flood.max.unscoped=0
+      sendFloodScoped(default_scope, packet, delay_millis, path_hash_size);
+      break;
+    case mesh::REPLY_SCOPE_NONE:
       sendFlood(packet, delay_millis, path_hash_size);   // send un-scoped
-    }
-  } else {
-    sendFlood(packet, delay_millis, path_hash_size);   // send un-scoped
+      break;
   }
 }
 

examples/simple_room_server/MyMesh.h

@@ -21,17 +21,18 @@
 #include <helpers/StatsFormatHelper.h>
 #include <helpers/ClientACL.h>
 #include <helpers/RegionMap.h>
+#include <helpers/RoutingPolicy.h>
 #include <RTClib.h>
 #include <target.h>
 
 /* ------------------------------ Config -------------------------------- */
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "9 Aug 2026"
+  #define FIRMWARE_BUILD_DATE   "14 Aug 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.17.0"
+  #define FIRMWARE_VERSION   "v1.17.1"
 #endif
 
 #ifndef LORA_FREQ

examples/simple_sensor/SensorMesh.cpp

@@ -735,6 +735,7 @@ SensorMesh::SensorMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::Millise
   _prefs.gps_interval = 0;
   _prefs.advert_loc_policy = ADVERT_LOC_PREFS;
   _prefs.radio_fem_rxgain = 1;
+  _prefs.radio_fem_txgain = 0;
 
   memset(default_scope.key, 0, sizeof(default_scope.key));
 }
@@ -771,6 +772,7 @@ void SensorMesh::begin(FILESYSTEM* fs) {
   radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
   radio_driver.setTxPower(_prefs.tx_power_dbm);
   board.setLoRaFemLnaEnabled(_prefs.radio_fem_rxgain);
+  board.setLoRaFemPaGainEnabled(_prefs.radio_fem_txgain);
 
   updateAdvertTimer();
   updateFloodAdvertTimer();

examples/simple_sensor/SensorMesh.h

@@ -34,11 +34,11 @@
 #define PERM_RECV_ALERTS_HI    (1 << 7)   // high priority alerts
 
 #ifndef FIRMWARE_BUILD_DATE
-  #define FIRMWARE_BUILD_DATE   "9 Aug 2026"
+  #define FIRMWARE_BUILD_DATE   "14 Aug 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-  #define FIRMWARE_VERSION   "v1.17.0"
+  #define FIRMWARE_VERSION   "v1.17.1"
 #endif
 
 #define FIRMWARE_ROLE "sensor"