Merge upstream companion-v1.17.0 (CAD) into power-saving

Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.

Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.

Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.

Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

variants/heltec_v3/HeltecV3Board.h

@@ -17,8 +17,6 @@
 #define  PIN_ADC_CTRL_ACTIVE    LOW
 #define  PIN_ADC_CTRL_INACTIVE  HIGH
 
-#include <driver/rtc_io.h>
-
 class HeltecV3Board : public ESP32Board {
 private:
   bool adc_active_state;
@@ -52,33 +50,6 @@ public:
     }
   }
 
-  void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) {
-    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
-
-    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
-    rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
-    rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
-
-    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
-
-    if (pin_wake_btn < 0) {
-      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet
-    } else {
-      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet OR wake btn
-    }
-
-    if (secs > 0) {
-      esp_sleep_enable_timer_wakeup(secs * 1000000);
-    }
-
-    // Finally set ESP32 into sleep
-    esp_deep_sleep_start();   // CPU halts here and never returns!
-  }
-
-  void powerOff() override {
-    enterDeepSleep(0);
-  }
-
   uint16_t getBattMilliVolts() override {
     analogReadResolution(10);
     digitalWrite(PIN_ADC_CTRL, adc_active_state);

variants/heltec_v3/platformio.ini

@@ -144,6 +144,7 @@ build_flags =
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D DISPLAY_CLASS=SSD1306Display
+  -D ENABLE_USB_INTERFACE
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
 build_src_filter = ${Heltec_lora32_v3.build_src_filter}
@@ -404,6 +405,7 @@ build_flags =
   ${Heltec_lora32_v3.build_flags}
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
+  -D ENABLE_USB_INTERFACE
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
 build_src_filter = ${Heltec_lora32_v3.build_src_filter}