Merge upstream companion-v1.17.0 (CAD) into power-saving

Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.

Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.

Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.

Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

variants/heltec_v4/HeltecV4Board.cpp

@@ -32,33 +32,12 @@ void HeltecV4Board::begin() {
     loRaFEMControl.setRxModeEnable();
   }
 
-  void HeltecV4Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) {
-    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+  void HeltecV4Board::powerOff() {
+    // Turn off PA
+    digitalWrite(P_LORA_PA_POWER, LOW);
+    rtc_gpio_hold_en((gpio_num_t)P_LORA_PA_POWER);
 
-    // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
-    rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY);
-    rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1);
-
-    rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS);
-
-    loRaFEMControl.setRxModeEnableWhenMCUSleep();//It also needs to be enabled in receive mode
-
-    if (pin_wake_btn < 0) {
-      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet
-    } else {
-      esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH);  // wake up on: recv LoRa packet OR wake btn
-    }
-
-    if (secs > 0) {
-      esp_sleep_enable_timer_wakeup(secs * 1000000);
-    }
-
-    // Finally set ESP32 into sleep
-    esp_deep_sleep_start();   // CPU halts here and never returns!
-  }
-
-  void HeltecV4Board::powerOff()  {
-    enterDeepSleep(0);
+    ESP32Board::powerOff();
   }
 
   uint16_t HeltecV4Board::getBattMilliVolts()  {
@@ -83,3 +62,21 @@ void HeltecV4Board::begin() {
     return loRaFEMControl.getFEMType() == KCT8103L_PA ? "Heltec V4.3 OLED" : "Heltec V4 OLED";
 #endif
   }
+
+  bool HeltecV4Board::setLoRaFemLnaEnabled(bool enable) {
+    if (!loRaFEMControl.isLnaCanControl()) {
+      return false;
+    }
+
+    loRaFEMControl.setLNAEnable(enable);
+    loRaFEMControl.setRxModeEnable();
+    return true;
+  }
+
+  bool HeltecV4Board::canControlLoRaFemLna() const {
+    return loRaFEMControl.isLnaCanControl();
+  }
+
+  bool HeltecV4Board::isLoRaFemLnaEnabled() const {
+    return loRaFEMControl.isLNAEnabled();
+  }

variants/heltec_v4/HeltecV4Board.h

@@ -3,7 +3,6 @@
 #include <Arduino.h>
 #include <helpers/RefCountedDigitalPin.h>
 #include <helpers/ESP32Board.h>
-#include <driver/rtc_io.h>
 #include "LoRaFEMControl.h"
 
 #ifndef ADC_MULTIPLIER
@@ -23,8 +22,10 @@ public:
   void begin();
   void onBeforeTransmit(void) override;
   void onAfterTransmit(void) override;
-  void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1);
   void powerOff() override;
+  bool setLoRaFemLnaEnabled(bool enable) override;
+  bool canControlLoRaFemLna() const override;
+  bool isLoRaFemLnaEnabled() const override;
   uint16_t getBattMilliVolts() override;
   bool setAdcMultiplier(float multiplier) override {
     if (multiplier == 0.0f) {

variants/heltec_v4/LoRaFEMControl.h

@@ -18,8 +18,9 @@ class LoRaFEMControl
     void setRxModeEnable(void);
     void setRxModeEnableWhenMCUSleep(void);
     void setLNAEnable(bool enabled);
-    bool isLnaCanControl(void) { return lna_can_control; }
+    bool isLnaCanControl(void) const { return lna_can_control; }
     void setLnaCanControl(bool can_control) { lna_can_control = can_control; }
+    bool isLNAEnabled(void) const { return lna_enabled; }
     LoRaFEMType getFEMType(void) const { return fem_type; }
   private:
     LoRaFEMType fem_type=OTHER_FEM_TYPES;

variants/heltec_v4/platformio.ini

@@ -187,6 +187,7 @@ build_flags =
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D DISPLAY_CLASS=SSD1306Display
+  -D ENABLE_USB_INTERFACE
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
 build_src_filter = ${heltec_v4_oled.build_src_filter}
@@ -436,6 +437,7 @@ build_flags =
   -D MAX_CONTACTS=350
   -D MAX_GROUP_CHANNELS=40
   -D DISPLAY_CLASS=ST7789LCDDisplay
+  -D ENABLE_USB_INTERFACE
 ; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
 ; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
 build_src_filter = ${heltec_v4_tft.build_src_filter}
@@ -517,5 +519,10 @@ lib_deps =
 
 [env:heltec_v4_kiss_modem]
 extends = Heltec_lora32_v4
+build_unflags =
+  -DARDUINO_USB_MODE=0
+build_flags =
+  ${Heltec_lora32_v4.build_flags}
+  -DARDUINO_USB_MODE=1
 build_src_filter = ${Heltec_lora32_v4.build_src_filter}
   +<../examples/kiss_modem/>