Mirrors/MeshCore-Solo
1
0
Fork 0
mirror of https://github.com/MarekZegare4/MeshCore-Solo.git synced 2026-07-31 01:08:14 +00:00
Code Issues Packages Projects Releases Wiki Activity

feat(gps): use HDOP for !gps fix readiness, satellite count as fallback

Browse Source 
Satellite count alone is a poor proxy for fix quality -- few satellites
in good geometry can beat many in poor geometry. LocationProvider now
exposes getHDOP() (default -1 = unsupported); MicroNMEA implements it.
isLocFixReady() prefers HDOP <= 2.0 when available, falling back to the
old >=8 satellite threshold for providers that don't report it (e.g.
RAK12500/u-blox).

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
This commit is contained in:
Jakub
2026-07-24 22:49:17 +02:00
parent 2c656f5af7
commit 7b6ae8e2cb
6 changed files with 29 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
release-notes.md
View File

@@ -4,7 +4,7 @@
- **Auto-Reply Bot is renamed to Remote Bot.** It's grown beyond auto-replies into remote device control (Actions, below), so the Tools screen entry and docs now say "Remote Bot" — same screen, same settings, nothing to reconfigure.
- **Remote Bot gains Actions: `!buzz`, `!gps`, `!advert`.** A new **Actions** toggle (per target — Direct/Channel/Room, nested under each target's existing **Commands** toggle) enables three commands that change the device's own behaviour instead of just reporting on it: `!buzz [seconds]` sounds the buzzer as a find-me signal (default 5s, capped at 30s, sounds even if the buzzer is muted), `!gps on`/`!gps off` toggles GPS, and `!advert` sends an immediate advert. Off by default; combines with the existing query commands in one message the same way (`!batt !gps on` → `4.10V | GPS: on`).
- **`!gps fix` — single-shot GPS location, no need to leave GPS running.** Turns GPS on (if it wasn't already), waits for a stabilised fix (≥8 satellites, then averages for 10s), sends the position, and restores GPS to whatever state it was in before — up to a 90s timeout, after which it reports a partial fix (if it got at least some samples) or failure. Replies in two parts: an immediate "acquiring fix..." ack, then the actual position as a follow-up message once ready. Only one fix request can be in flight at a time (a second one gets "fix already pending"); same Actions toggle as `!buzz`/`!gps`/`!advert`.
- **`!gps fix` — single-shot GPS location, no need to leave GPS running.** Turns GPS on (if it wasn't already), waits for a stabilised fix (HDOP ≤ 2.0 — falls back to ≥8 satellites on GPS hardware that doesn't report HDOP — then averages for 10s), sends the position, and restores GPS to whatever state it was in before — up to a 90s timeout, after which it reports a partial fix (if it got at least some samples) or failure. Replies in two parts: an immediate "acquiring fix..." ack, then the actual position as a follow-up message once ready. Only one fix request can be in flight at a time (a second one gets "fix already pending"); same Actions toggle as `!buzz`/`!gps`/`!advert`.
- **Bot Trigger fields accept multiple phrases.** Pack several trigger words into one Trigger field, comma-separated (`hi,hello there,yo`) — matching any one of them fires the reply, same as before for a single phrase.
- **Remote Bot Actions gain `!gpio1`..`!gpio4`** (Wio Tracker L1 only — 4 otherwise-unused pins). Each pin is independently set to Off/Input/Output (GPIO1/GPIO2 also offer Analog) from a new **Tools › GPIO** screen; `!gpio1 on`/`!gpio1 off` drives an Output pin remotely, a bare `!gpio1` reports the current mode and reading (including a millivolt value in Analog mode). Gated by the same per-target Actions toggle as `!buzz`/`!gps`/`!advert`.
- **Optional CardKB support (Wio Tracker L1, Grove I2C) — full keyboard-only navigation.** Plug an M5Stack CardKB into the Grove connector and it's auto-detected at boot — no setting to flip. Typing goes straight into the message/name field instead of navigating the on-screen keyboard grid; arrows and Esc work as expected everywhere else too (including inside the placeholder and accent popups). Enter acts like the physical centre button (advances the on-screen grid selection) rather than submitting, so **Fn+Enter** sends the message/confirms the field from anywhere, **Fn+`<letter>`** opens that letter's accent popup directly (no arrow-hunting needed — handy for Polish/Czech/etc. diacritics), and **Fn+Tab** opens the Hold-Enter equivalent (Shift-lock, clear field) for whatever's selected; plain **Tab** still opens the Hold-Enter context menu everywhere else (message reply/navigate, Bot/Admin/Repeater menus, …).