Merge remote-tracking branch 'official/main' into dev

docs/cli_commands.md

@@ -29,12 +29,25 @@ This document provides an overview of CLI commands that can be sent to MeshCore
 **Usage:** 
 - `reboot`
 
+**Note:** No reply is sent.
+
+---
+
+### Power-off the node
+**Usage:**
+- `poweroff`, or
+- `shutdown`
+
+**Note:** No reply is sent.
+
 ---
 
 ### Reset the clock and reboot
 **Usage:**
 - `clkreboot`
 
+**Note:** No reply is sent.
+
 ---
 
 ### Sync the clock with the remote device
@@ -661,10 +674,21 @@ This document provides an overview of CLI commands that can be sent to MeshCore
 **Parameters:**
 - `value`: Maximum flood hop count (0-64) for a packet without a scope (no region set)
 
-**Default:** `0xFF` - indicates it hasn't been set, will track flood.max until it is.
+**Default:** `64` - (`0xFF` indicates it hasn't been set, will track flood.max until it is.)
 
 **Note:** An alternative to `region denyf *`, setting `flood.max.unscoped` to a lower value such as `3` would allow for local unscoped messages to propagate, while preventing noisy neighbors from flooding a local region.
 
+---
+
+#### Limit the number of hops for an advert flood message
+**Usage:**
+- `get flood.max.advert`
+- `set flood.max.advert <value>`
+
+**Parameters:**
+- `value`: Maximum flood hop count (0-64) for an advert packet
+
+**Default:** `8`
 
 ---
 

docs/qr_codes.md

@@ -12,8 +12,10 @@ meshcore://channel/add?name=Public&secret=8b3387e9c5cdea6ac9e5edbaa115cd72
 
 **Parameters**:
 
-- `name`: Channel name (URL-encoded if needed)
+- `name`: Channel name (URL-encoded)
 - `secret`: 16-byte secret represented as 32 hex characters
+- `region_scope`: Region Scope (optional, URL-encoded if provided)
+    - Supported by MeshCore App v1.47.0+
 
 ## Add Contact