diff --git a/examples/companion_radio/MyMesh.cpp b/examples/companion_radio/MyMesh.cpp
index feda3545..5b590379 100644
--- a/examples/companion_radio/MyMesh.cpp
+++ b/examples/companion_radio/MyMesh.cpp
@@ -2488,9 +2488,11 @@ void MyMesh::handleCmdFrame(size_t len) {
     if (power < -9 || power > MAX_LORA_TX_POWER) {
       writeErrFrame(ERR_CODE_ILLEGAL_ARG);
     } else {
-      _prefs.tx_power_dbm = power;
+      radio_driver.setTxPower(power);
+      // Store what the radio actually applied, not the raw request -- on a
+      // board with an external-PA gain curve those can differ (see setTxPower()).
+      _prefs.tx_power_dbm = radio_driver.getTxPower();
       savePrefs();
-      radio_driver.setTxPower(_prefs.tx_power_dbm);
       writeOKFrame();
     }
   } else if (cmd_frame[0] == CMD_SET_TUNING_PARAMS) {
diff --git a/examples/simple_repeater/MyMesh.cpp b/examples/simple_repeater/MyMesh.cpp
index ac0965bd..370ef549 100644
--- a/examples/simple_repeater/MyMesh.cpp
+++ b/examples/simple_repeater/MyMesh.cpp
@@ -1095,8 +1095,9 @@ void MyMesh::dumpLogFile() {
   }
 }
 
-void MyMesh::setTxPower(int8_t power_dbm) {
+int8_t MyMesh::setTxPower(int8_t power_dbm) {
   radio_driver.setTxPower(power_dbm);
+  return radio_driver.getTxPower();
 }
 
 bool MyMesh::setRxBoostedGain(bool enable) {
diff --git a/examples/simple_repeater/MyMesh.h b/examples/simple_repeater/MyMesh.h
index 04bd4fb9..bd561a2d 100644
--- a/examples/simple_repeater/MyMesh.h
+++ b/examples/simple_repeater/MyMesh.h
@@ -212,7 +212,7 @@ public:
   }
 
   void dumpLogFile() override;
-  void setTxPower(int8_t power_dbm) override;
+  int8_t setTxPower(int8_t power_dbm) override;
   void formatNeighborsReply(char *reply) override;
   void removeNeighbor(const uint8_t* pubkey, int key_len) override;
   void formatStatsReply(char *reply) override;
diff --git a/examples/simple_room_server/MyMesh.cpp b/examples/simple_room_server/MyMesh.cpp
index f2588ec8..606110f2 100644
--- a/examples/simple_room_server/MyMesh.cpp
+++ b/examples/simple_room_server/MyMesh.cpp
@@ -839,8 +839,9 @@ void MyMesh::dumpLogFile() {
   }
 }
 
-void MyMesh::setTxPower(int8_t power_dbm) {
+int8_t MyMesh::setTxPower(int8_t power_dbm) {
   radio_driver.setTxPower(power_dbm);
+  return radio_driver.getTxPower();
 }
 
 bool MyMesh::setRxBoostedGain(bool enable) {
diff --git a/examples/simple_room_server/MyMesh.h b/examples/simple_room_server/MyMesh.h
index 5cf949c6..b2aeae58 100644
--- a/examples/simple_room_server/MyMesh.h
+++ b/examples/simple_room_server/MyMesh.h
@@ -208,7 +208,7 @@ public:
   }
 
   void dumpLogFile() override;
-  void setTxPower(int8_t power_dbm) override;
+  int8_t setTxPower(int8_t power_dbm) override;
   bool setRxBoostedGain(bool enable) override;
 
   void formatNeighborsReply(char *reply) override {
diff --git a/examples/simple_sensor/SensorMesh.cpp b/examples/simple_sensor/SensorMesh.cpp
index 9bfa5ec6..9513b33f 100644
--- a/examples/simple_sensor/SensorMesh.cpp
+++ b/examples/simple_sensor/SensorMesh.cpp
@@ -848,8 +848,9 @@ void SensorMesh::updateFloodAdvertTimer() {
   }
 }
 
-void SensorMesh::setTxPower(int8_t power_dbm) {
+int8_t SensorMesh::setTxPower(int8_t power_dbm) {
   radio_driver.setTxPower(power_dbm);
+  return radio_driver.getTxPower();
 }
 
 void SensorMesh::formatStatsReply(char *reply) {
diff --git a/examples/simple_sensor/SensorMesh.h b/examples/simple_sensor/SensorMesh.h
index b5e96d5c..3541951c 100644
--- a/examples/simple_sensor/SensorMesh.h
+++ b/examples/simple_sensor/SensorMesh.h
@@ -67,7 +67,7 @@ public:
   void setLoggingOn(bool enable) override {  }
   void eraseLogFile() override { }
   void dumpLogFile() override { }
-  void setTxPower(int8_t power_dbm) override;
+  int8_t setTxPower(int8_t power_dbm) override;
   void formatNeighborsReply(char *reply) override {
     strcpy(reply, "not supported");
   }
diff --git a/src/helpers/CommonCLI.cpp b/src/helpers/CommonCLI.cpp
index b318bb58..5e598ac2 100644
--- a/src/helpers/CommonCLI.cpp
+++ b/src/helpers/CommonCLI.cpp
@@ -706,9 +706,10 @@ void CommonCLI::handleSetCmd(uint32_t sender_timestamp, char* command, char* rep
       strcpy(reply, "OK");
     }
   } else if (memcmp(config, "tx ", 3) == 0) {
-    _prefs->tx_power_dbm = atoi(&config[3]);
+    // Store what the radio actually applied, not the raw request -- on a
+    // board with an external-PA gain curve those can differ (see setTxPower()).
+    _prefs->tx_power_dbm = _callbacks->setTxPower(atoi(&config[3]));
     savePrefs();
-    _callbacks->setTxPower(_prefs->tx_power_dbm);
     strcpy(reply, "OK");
   } else if (sender_timestamp == 0 && memcmp(config, "freq ", 5) == 0) {
     _prefs->freq = atof(&config[5]);
diff --git a/src/helpers/CommonCLI.h b/src/helpers/CommonCLI.h
index 237c758e..db2d201b 100644
--- a/src/helpers/CommonCLI.h
+++ b/src/helpers/CommonCLI.h
@@ -207,7 +207,11 @@ public:
   virtual void setLoggingOn(bool enable) = 0;
   virtual void eraseLogFile() = 0;
   virtual void dumpLogFile() = 0;
-  virtual void setTxPower(int8_t power_dbm) = 0;
+  // Returns the dBm the radio actually applied -- on a board with an
+  // external-PA gain curve this can differ from power_dbm (e.g. a request
+  // below the PA's floor gain still radiates at that floor), so callers
+  // should persist/report the return value, not the raw request.
+  virtual int8_t setTxPower(int8_t power_dbm) = 0;
   virtual void formatNeighborsReply(char *reply) = 0;
   virtual void removeNeighbor(const uint8_t* pubkey, int key_len) {
     // no op by default
diff --git a/src/helpers/radiolib/CustomSX1262Wrapper.h b/src/helpers/radiolib/CustomSX1262Wrapper.h
index 06453868..82005ad6 100644
--- a/src/helpers/radiolib/CustomSX1262Wrapper.h
+++ b/src/helpers/radiolib/CustomSX1262Wrapper.h
@@ -97,7 +97,7 @@ public:
       ((CustomSX1262 *)_radio)->setCodingRate(_wd_cr);
       updatePreamble(_wd_sf);
     }
-    _radio->setOutputPower(getTxPower());
+    setTxPower(getTxPower());   // re-run through the wrapper's own setter so any PA gain curve reapplies
     // Unconditional: std_init() may have just turned boosted gain back ON via
     // the board's SX126X_RX_BOOSTED_GAIN compile default, so the OFF case
     // needs reapplying just as much as ON.
diff --git a/src/helpers/radiolib/RadioLibWrappers.cpp b/src/helpers/radiolib/RadioLibWrappers.cpp
index 485f743e..d17d5777 100644
--- a/src/helpers/radiolib/RadioLibWrappers.cpp
+++ b/src/helpers/radiolib/RadioLibWrappers.cpp
@@ -52,8 +52,23 @@ uint32_t RadioLibWrapper::getRngSeed() {
 }
 
 void RadioLibWrapper::setTxPower(int8_t dbm) {
-  _tx_dbm = dbm;
+  _tx_dbm = dbm;   // logical/requested power -- what getTxPower(), the app and the CLI report
+#if defined(NUM_PA_POINTS) && defined(TX_GAIN_LORA)
+  // Per-board external-PA gain curve (radio_dbm -> measured gain in dB, from
+  // the vendor/GAT562-30S data cited in the upstream Meshtastic PR that added
+  // it, meshtastic/firmware#11212). The PA is always-on (no enable pin), so
+  // the SX1262 register alone decides real output; pick the lowest register
+  // setting whose (setting + its measured gain) reaches the requested dBm,
+  // clamping to the last entry once the PA saturates.
+  static const int8_t pa_gain[NUM_PA_POINTS] = { TX_GAIN_LORA };
+  int8_t radio_dbm = NUM_PA_POINTS - 1;
+  for (int i = 0; i < NUM_PA_POINTS; i++) {
+    if ((i + pa_gain[i]) >= dbm) { radio_dbm = i; break; }
+  }
+  _radio->setOutputPower(radio_dbm);
+#else
   _radio->setOutputPower(dbm);
+#endif
 }
 
 void RadioLibWrapper::idle() {
diff --git a/variants/gat562_30s_mesh_kit/platformio.ini b/variants/gat562_30s_mesh_kit/platformio.ini
index ef6e9f6d..bf4cfd25 100644
--- a/variants/gat562_30s_mesh_kit/platformio.ini
+++ b/variants/gat562_30s_mesh_kit/platformio.ini
@@ -14,7 +14,16 @@ build_flags = ${nrf52_base.build_flags}
   -D UI_HAS_JOYSTICK=1
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
-  -D LORA_TX_POWER=22
+  -D LORA_TX_POWER=30
+  -D MAX_LORA_TX_POWER=30
+  ; External PA (not the bare SX1262's own PA_BOOST), always on, no enable
+  ; pin -- gain curve measured by the vendor at 869MHz, from the upstream
+  ; Meshtastic PR that added it for this exact module (meshtastic/firmware#11212).
+  ; Picks the lowest SX1262 register setting whose (setting + gain) reaches
+  ; the requested dBm, so "30" in the app/CLI means the real ~30dBm the PA
+  ; saturates at, not a raw, unamplified chip register value.
+  -D NUM_PA_POINTS=16
+  -D TX_GAIN_LORA=14,15,16,17,17,18,18,18,18,18,17,17,17,16,16,15
   -D SX126X_CURRENT_LIMIT=140
   -D PIN_BUZZER=33
   -D SX126X_RX_BOOSTED_GAIN=1