Mirrors/MeshCore-Solo
1
0
Fork 0
mirror of https://github.com/MarekZegare4/MeshCore-Solo.git synced 2026-07-26 14:58:12 +00:00
Code Issues Packages Projects Releases Wiki Activity

rename(ui): Auto-Reply Bot -> Remote Bot

Browse Source 
The bot outgrew "auto-reply" once it gained Actions (!buzz/!gps/!advert/
!gpio1-4) that control device hardware remotely, not just answer messages.
Renames the Tools screen entry and all doc cross-references; already-shipped
release notes (v1.23) are left as-is to match what actually shipped under
that name.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
This commit is contained in:
Jakub
2026-07-21 23:15:41 +02:00
parent 5bfebc6559
commit a57d5d67bb
4 changed files with 11 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@@ -51,7 +51,7 @@ All firmware files are published on the [releases page](https://github.com/Marek
- [Screen Lock](./docs/solo_features/screen_lock/screen_lock.md) — lock the device to prevent accidental keypresses, with a lock screen showing time and sensor data - [Screen Lock](./docs/solo_features/screen_lock/screen_lock.md) — lock the device to prevent accidental keypresses, with a lock screen showing time and sensor data
- [Tools Screen](./docs/solo_features/tools_screen/tools_screen.md) — GPS trail & waypoints, compass, nearby nodes (with ping & navigate), ringtone editor, auto-reply bot, auto-advert, live location sharing, locator, diagnostics, repeater, remote admin - [Tools Screen](./docs/solo_features/tools_screen/tools_screen.md) — GPS trail & waypoints, compass, nearby nodes (with ping & navigate), ringtone editor, remote bot, auto-advert, live location sharing, locator, diagnostics, repeater, remote admin
- **Battery saving (radio)** — two optional, independent toggles under Settings › Radio: - **Battery saving (radio)** — two optional, independent toggles under Settings › Radio:
- **Pwr save** — hardware duty-cycle receive (SX126x `SetRxDutyCycle`): the radio cycles RX↔sleep on its own and wakes on a preamble, cutting average RX current with only a little added receive latency - **Pwr save** — hardware duty-cycle receive (SX126x `SetRxDutyCycle`): the radio cycles RX↔sleep on its own and wakes on a preamble, cutting average RX current with only a little added receive latency
@@ -99,7 +99,7 @@ Updating to a newer version usually does not require erasing flash unless the re
| [Clock Screen](./docs/solo_features/clock_screen/clock_screen.md) | Clock page, date, configurable data fields, alarm / timer / stopwatch | | [Clock Screen](./docs/solo_features/clock_screen/clock_screen.md) | Clock page, date, configurable data fields, alarm / timer / stopwatch |
| [Settings Screen](./docs/solo_features/settings_screen/settings_screen.md) | All settings sections with values and interactions | | [Settings Screen](./docs/solo_features/settings_screen/settings_screen.md) | All settings sections with values and interactions |
| [Screen Lock](./docs/solo_features/screen_lock/screen_lock.md) | Lock/unlock sequence, lock screen, auto-lock | | [Screen Lock](./docs/solo_features/screen_lock/screen_lock.md) | Lock/unlock sequence, lock screen, auto-lock |
| [Tools Screen](./docs/solo_features/tools_screen/tools_screen.md) | GPS trail & waypoints, compass, navigation, nearby nodes, ringtone editor, auto-reply bot, auto-advert, live location sharing, locator, diagnostics, repeater, remote admin | | [Tools Screen](./docs/solo_features/tools_screen/tools_screen.md) | GPS trail & waypoints, compass, navigation, nearby nodes, ringtone editor, remote bot, auto-advert, live location sharing, locator, diagnostics, repeater, remote admin |
| [Solo UI framework](./docs/design/solo_ui_framework.md) | **Developer guide** — the reusable building blocks (screens, lists, popups, mini-icons, geo/persistence helpers) and how to add a new feature | | [Solo UI framework](./docs/design/solo_ui_framework.md) | **Developer guide** — the reusable building blocks (screens, lists, popups, mini-icons, geo/persistence helpers) and how to add a new feature |
### Upstream MeshCore ### Upstream MeshCore

10
docs/solo_features/tools_screen/tools_screen.md
View File

@@ -8,7 +8,7 @@
| :-----------------------: | :-----------------------: | | :-----------------------: | :-----------------------: |
| ![](./overview_oled.png) | ![](./overview_eink.png) | | ![](./overview_oled.png) | ![](./overview_eink.png) |
The Tools screen is a hub for GPS trail recording, nearby node browsing, ringtone editing, auto-reply bot, auto-advert, live location sharing, locator, compass, clock tools (alarm / timer / stopwatch), device diagnostics, repeater mode, and remote admin. Tools are grouped into collapsible **Location** / **Comms** / **System** sections — the same fold-in-place model as Settings; Tools always opens folded back to the section list. Navigate with **UP/DOWN**, press **Enter** on a section header to expand or collapse it, or on a tool to open it. The Tools screen is a hub for GPS trail recording, nearby node browsing, ringtone editing, the remote bot, auto-advert, live location sharing, locator, compass, clock tools (alarm / timer / stopwatch), device diagnostics, repeater mode, and remote admin. Tools are grouped into collapsible **Location** / **Comms** / **System** sections — the same fold-in-place model as Settings; Tools always opens folded back to the section list. Navigate with **UP/DOWN**, press **Enter** on a section header to expand or collapse it, or on a tool to open it.
--- ---
@@ -359,7 +359,7 @@ Melodies can be assigned in **Settings › Sound** (global default) or overridde
--- ---
## Auto-Reply Bot ## Remote Bot
| OLED | E-Ink | | OLED | E-Ink |
| :-----------------------: | :-----------------------: | | :-----------------------: | :-----------------------: |
@@ -467,7 +467,7 @@ On boards with user GPIO (see **GPIO** under System tools below), the same Actio
<!-- screenshot pending: Diagnostics — live device/mesh stats rows (uptime, rx/tx counters, heap, RSSI/SNR, queue, errors) --> <!-- screenshot pending: Diagnostics — live device/mesh stats rows (uptime, rx/tx counters, heap, RSSI/SNR, queue, errors) -->
A circular tab carousel of live device and mesh stats, refreshed once a second (same tab idiom as Auto-Reply Bot / Nodes). **LEFT/RIGHT** switches tab; **UP/DOWN** scrolls within it on a small OLED — on a larger e-ink display a tab's rows all fit at once. A circular tab carousel of live device and mesh stats, refreshed once a second (same tab idiom as Remote Bot / Nodes). **LEFT/RIGHT** switches tab; **UP/DOWN** scrolls within it on a small OLED — on a larger e-ink display a tab's rows all fit at once.
| Tab | Shows | | Tab | Shows |
| --- | ----- | | --- | ----- |
@@ -510,7 +510,7 @@ Once a pin is set to **Output**, a second **State** row appears right underneath
- **Analog** (GPIO1/GPIO2 only) shows a live millivolt reading inline instead: e.g. `1650mV`. Has no State row — it's read-only. - **Analog** (GPIO1/GPIO2 only) shows a live millivolt reading inline instead: e.g. `1650mV`. Has no State row — it's read-only.
- **Output** shows just `Output` on the Mode row; the actual ON/OFF value lives on the State row below it. - **Output** shows just `Output` on the Mode row; the actual ON/OFF value lives on the State row below it.
The same 4 pins are reachable remotely via the Auto-Reply Bot's `!gpio1`..`!gpio4` commands (see **Actions** under Auto-Reply Bot below) — both paths read/write the same underlying state, so the Tools screen and the bot never disagree. A bare `!gpio1` reports the pin's current mode and reading (`gpio1: out on`, `gpio1: in on`, or `gpio1: 1650mV` in Analog mode); `!gpio1 on`/`!gpio1 off` only takes effect if that pin is currently set to Output here (otherwise the bot replies "not output", including when the pin is in Analog mode). The same 4 pins are reachable remotely via the Remote Bot's `!gpio1`..`!gpio4` commands (see **Actions** under Remote Bot below) — both paths read/write the same underlying state, so the Tools screen and the bot never disagree. A bare `!gpio1` reports the pin's current mode and reading (`gpio1: out on`, `gpio1: in on`, or `gpio1: 1650mV` in Analog mode); `!gpio1 on`/`!gpio1 off` only takes effect if that pin is currently set to Output here (otherwise the bot replies "not output", including when the pin is in Analog mode).
--- ---
@@ -557,7 +557,7 @@ Send commands to a **repeater/room server you have admin permission on** — the
1. **Select a node** — opening **Tools › Admin** goes straight to **Tools › Nodes** (the same screen, filters, sort and live scan as browsing it normally) so picking a node for Admin looks exactly like using Nodes for anything else; **Enter** on a repeater/room row hands it to Admin, **Cancel** returns to Tools. Admin is also reachable directly from a node's own **Hold Enter** menu in Nodes. 1. **Select a node** — opening **Tools › Admin** goes straight to **Tools › Nodes** (the same screen, filters, sort and live scan as browsing it normally) so picking a node for Admin looks exactly like using Nodes for anything else; **Enter** on a repeater/room row hands it to Admin, **Cancel** returns to Tools. Admin is also reachable directly from a node's own **Hold Enter** menu in Nodes.
2. **Log in** — type the node's **admin password** (the same login handshake Messages uses for room servers; a repeater's admin password is set with the `password` CLI command). If a password was already saved for this node from an earlier successful login, it retries silently instead of prompting. Only a login that comes back with **admin**-level permission unlocks the next step — anything less shows "Not admin on this node". 2. **Log in** — type the node's **admin password** (the same login handshake Messages uses for room servers; a repeater's admin password is set with the `password` CLI command). If a password was already saved for this node from an earlier successful login, it retries silently instead of prompting. Only a login that comes back with **admin**-level permission unlocks the next step — anything less shows "Not admin on this node".
3. **Pick a category and a field** — a tab carousel (**LEFT/RIGHT** to switch category, **UP/DOWN** to move within it, same as Auto-Reply Bot's tabs), so common settings don't need the CLI grammar memorised: 3. **Pick a category and a field** — a tab carousel (**LEFT/RIGHT** to switch category, **UP/DOWN** to move within it, same as Remote Bot's tabs), so common settings don't need the CLI grammar memorised:
| Tab | Rows | | Tab | Rows |
| --- | ---- | | --- | ---- |

2
examples/companion_radio/ui-new/ToolsScreen.h
View File

@@ -125,7 +125,7 @@ const ToolsScreen::Tool ToolsScreen::LOCATION_TOOLS[] = {
{ "Compass", &ICON_MAP_NORTH, ACT_COMPASS }, { "Compass", &ICON_MAP_NORTH, ACT_COMPASS },
}; };
const ToolsScreen::Tool ToolsScreen::COMMS_TOOLS[] = { const ToolsScreen::Tool ToolsScreen::COMMS_TOOLS[] = {
{ "Auto-Reply Bot", &ICON_BOT, ACT_BOT }, { "Remote Bot", &ICON_BOT, ACT_BOT },
{ "Auto-Advert", &ICON_ADVERT, ACT_AUTOADVERT }, { "Auto-Advert", &ICON_ADVERT, ACT_AUTOADVERT },
{ "Repeater", &ICON_REPEATER, ACT_REPEATER }, { "Repeater", &ICON_REPEATER, ACT_REPEATER },
{ "Admin", &ICON_GEAR, ACT_ADMIN }, { "Admin", &ICON_GEAR, ACT_ADMIN },

5
release-notes.md
View File

@@ -2,9 +2,10 @@
### What's new ### What's new
- **Auto-Reply Bot gains Actions: `!buzz`, `!gps`, `!advert`.** A new **Actions** toggle (per target — Direct/Channel/Room, nested under each target's existing **Commands** toggle) enables three commands that change the device's own behaviour instead of just reporting on it: `!buzz [seconds]` sounds the buzzer as a find-me signal (default 5s, capped at 30s, sounds even if the buzzer is muted), `!gps on`/`!gps off` toggles GPS, and `!advert` sends an immediate advert. Off by default; combines with the existing query commands in one message the same way (`!batt !gps on` → `4.10V | GPS: on`). - **Auto-Reply Bot is renamed to Remote Bot.** It's grown beyond auto-replies into remote device control (Actions, below), so the Tools screen entry and docs now say "Remote Bot" — same screen, same settings, nothing to reconfigure.
- **Remote Bot gains Actions: `!buzz`, `!gps`, `!advert`.** A new **Actions** toggle (per target — Direct/Channel/Room, nested under each target's existing **Commands** toggle) enables three commands that change the device's own behaviour instead of just reporting on it: `!buzz [seconds]` sounds the buzzer as a find-me signal (default 5s, capped at 30s, sounds even if the buzzer is muted), `!gps on`/`!gps off` toggles GPS, and `!advert` sends an immediate advert. Off by default; combines with the existing query commands in one message the same way (`!batt !gps on` → `4.10V | GPS: on`).
- **Bot Trigger fields accept multiple phrases.** Pack several trigger words into one Trigger field, comma-separated (`hi,hello there,yo`) — matching any one of them fires the reply, same as before for a single phrase. - **Bot Trigger fields accept multiple phrases.** Pack several trigger words into one Trigger field, comma-separated (`hi,hello there,yo`) — matching any one of them fires the reply, same as before for a single phrase.
- **Auto-Reply Bot Actions gain `!gpio1`..`!gpio4`** (Wio Tracker L1 only — 4 otherwise-unused pins). Each pin is independently set to Off/Input/Output (GPIO1/GPIO2 also offer Analog) from a new **Tools › GPIO** screen; `!gpio1 on`/`!gpio1 off` drives an Output pin remotely, a bare `!gpio1` reports the current mode and reading (including a millivolt value in Analog mode). Gated by the same per-target Actions toggle as `!buzz`/`!gps`/`!advert`. - **Remote Bot Actions gain `!gpio1`..`!gpio4`** (Wio Tracker L1 only — 4 otherwise-unused pins). Each pin is independently set to Off/Input/Output (GPIO1/GPIO2 also offer Analog) from a new **Tools › GPIO** screen; `!gpio1 on`/`!gpio1 off` drives an Output pin remotely, a bare `!gpio1` reports the current mode and reading (including a millivolt value in Analog mode). Gated by the same per-target Actions toggle as `!buzz`/`!gps`/`!advert`.
### Fixes ### Fixes