feat(l2): long trails with a card copy; map follow and redraw fixes

Trail on the L2: 32768 points every 5 m, no simplification, no point
spacing setting; copied to the card every minute and restored at power-on.
The line keeps up with the position dot (incremental sync, pending point).

Map: a tap's finger jitter no longer turns follow off; the GPS button
shows when the map follows. The trail is drawn as one polyline with
breaks and off-view chunks skipped (an lv_line queued a draw task per
point).

Fewer rebuilds: conversation bubbles patched (new messages, delivery
marks), home mini-map dots reused, Nearby rows rewritten in place,
history read in runs and each file opened once.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

docs/solo/developer/build-flags.md

@@ -28,6 +28,9 @@ per-user. Listed here so the rest of this page can assume them.
 | `MAX_CONTACTS=<n>` | Size of the contact table. Default is 32 if unset; solo builds set 350. |
 | `MAX_GROUP_CHANNELS=<n>` | Size of the channel list. Required for channel support to compile in at all — not optional the way the rest of this page is. |
 | `OFFLINE_QUEUE_SIZE=<n>` | How many messages queue for later delivery while the phone app is disconnected. Default 16; solo builds set 256. |
+| `TRAIL_CAPACITY=<n>` | Points the GPS trail holds (16 B each). Default 512 for the nRF52's RAM; the L2 sets 32768 in PSRAM. At most 65535 (the save format's count). |
+| `TRAIL_SIMPLIFY=0` | Keeps every trail sample instead of storing straight stretches as their two ends. For boards with the memory for it (the L2). |
+| `TRAIL_FIXED_MIN_DELTA_M=<m>` | A fixed distance between trail points instead of the Point spacing setting, which is then hidden (the L2: 5 m, against GPS jitter). |
 | `UI_SENSORS_PAGE=1` | Enables the on-device sensors dashboard page. |
 | `BLE_PIN_CODE=<n>` | See below — not a plain fixed value in practice. |
 | `DISPLAY_CLASS=<Class>` | Selects the display driver (e.g. `SSD1306Display`, `GxEPDDisplay`, `ST7789Display` — see `src/helpers/ui/` for the full set). Fixed by whatever panel the board actually has; only relevant if you're wiring on a *different* display than stock, in which case the matching driver's `.cpp` also needs adding to `build_src_filter`. |

docs/solo/navigation.md

@@ -36,7 +36,11 @@ Chrome or Edge and click **Connect device**, then on the device choose
 it's connected over USB.
 
 > [!NOTE]
-> **Wio Tracker L2:** the trail holds 4096 points and is drawn on the map.
+> **Wio Tracker L2:** the trail holds 32,768 points, every GPS fix 5 m or
+> more from the last one (no simplification and no Min dist setting), about
+> 160 km on foot. A copy on the SD card is updated every minute, so a restart
+> or a flat battery doesn't lose it: the trail comes back at power-on, still
+> recording if it was. It is drawn on the map and keeps up with your position.
 > Its controls (start / stop, save, load, track back, reset) are in the map's
 > **Map tools**, the settings in Settings › Map. **GPX** writes the trail to
 > `trails/` on the SD card; take it off with the card as a USB drive