Merge pull request #2887 from spinda/thinknode-m3-dev

Fix GPS and LEDs on ThinkNode M3

src/helpers/sensors/MicroNMEALocationProvider.h

@@ -13,8 +13,12 @@
     #endif
 #endif
 
-#ifndef PIN_GPS_EN_ACTIVE
+#ifndef GPS_EN_ACTIVE
-    #define PIN_GPS_EN_ACTIVE HIGH
+    #ifdef PIN_GPS_EN_ACTIVE
+        #define GPS_EN_ACTIVE PIN_GPS_EN_ACTIVE
+    #else
+        #define GPS_EN_ACTIVE HIGH
+    #endif
 #endif
 
 #ifndef GPS_RESET
@@ -25,11 +29,11 @@
     #endif
 #endif
 
-#ifndef GPS_RESET_FORCE
+#ifndef GPS_RESET_ACTIVE
     #ifdef PIN_GPS_RESET_ACTIVE
-        #define GPS_RESET_FORCE PIN_GPS_RESET_ACTIVE
+        #define GPS_RESET_ACTIVE PIN_GPS_RESET_ACTIVE
     #else
-        #define GPS_RESET_FORCE LOW
+        #define GPS_RESET_ACTIVE LOW
     #endif
 #endif
 
@@ -52,11 +56,11 @@ public :
     nmea(_nmeaBuffer, sizeof(_nmeaBuffer)), _clock(clock), _gps_serial(&ser), _peripher_power(peripher_power), _pin_reset(pin_reset), _pin_en(pin_en) {
         if (_pin_reset != -1) {
             pinMode(_pin_reset, OUTPUT);
-            digitalWrite(_pin_reset, GPS_RESET_FORCE);
+            digitalWrite(_pin_reset, GPS_RESET_ACTIVE);
         }
         if (_pin_en != -1) {
             pinMode(_pin_en, OUTPUT);
-            digitalWrite(_pin_en, LOW);
+            digitalWrite(_pin_en, !GPS_EN_ACTIVE);
         }
     }
 
@@ -74,27 +78,27 @@ public :
     void begin() override {
         claim();
         if (_pin_en != -1) {
-            digitalWrite(_pin_en, PIN_GPS_EN_ACTIVE);
+            digitalWrite(_pin_en, GPS_EN_ACTIVE);
         }
         if (_pin_reset != -1) {
-            digitalWrite(_pin_reset, !GPS_RESET_FORCE);
+            digitalWrite(_pin_reset, !GPS_RESET_ACTIVE);
         }
     }
 
     void reset() override {
         if (_pin_reset != -1) {
-            digitalWrite(_pin_reset, GPS_RESET_FORCE);
+            digitalWrite(_pin_reset, GPS_RESET_ACTIVE);
             delay(10);
-            digitalWrite(_pin_reset, !GPS_RESET_FORCE);
+            digitalWrite(_pin_reset, !GPS_RESET_ACTIVE);
         }
     }
 
     void stop() override {
         if (_pin_en != -1) {
-            digitalWrite(_pin_en, !PIN_GPS_EN_ACTIVE);
+            digitalWrite(_pin_en, !GPS_EN_ACTIVE);
         }
         if (_pin_reset != -1) {
-            digitalWrite(_pin_reset, GPS_RESET_FORCE);
+            digitalWrite(_pin_reset, GPS_RESET_ACTIVE);
         }
         release();
     }
@@ -103,7 +107,7 @@ public :
         // directly read the enable pin if present as gps can be
         // activated/deactivated outside of here ...
         if (_pin_en != -1) {
-            return digitalRead(_pin_en) == PIN_GPS_EN_ACTIVE;
+            return digitalRead(_pin_en) == GPS_EN_ACTIVE;
         } else {
             return true; // no enable so must be active
         }

variants/thinknode_m3/ThinkNodeM3Board.h

@@ -18,12 +18,12 @@ public:
   void begin();
   uint16_t getBattMilliVolts() override;
 
-#if defined(P_LORA_TX_LED)
+#ifdef P_LORA_TX_LED
   void onBeforeTransmit() override {
-    digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED on
+    digitalWrite(P_LORA_TX_LED, LED_STATE_ON);  // turn TX LED on
   }
   void onAfterTransmit() override {
-    digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED off
+    digitalWrite(P_LORA_TX_LED, !LED_STATE_ON); // turn TX LED off
   }
 #endif
 
@@ -44,9 +44,9 @@ public:
 
   void powerOff() override {
     // turn off all leds, sd_power_system_off will not do this for us
-    #ifdef P_LORA_TX_LED
+    digitalWrite(PIN_LED_BLUE, !LED_STATE_ON);
-    digitalWrite(P_LORA_TX_LED, LOW);
+    digitalWrite(PIN_LED_GREEN, !LED_STATE_ON);
-    #endif
+    digitalWrite(PIN_LED_RED, !LED_STATE_ON);
 
     // power off board
     NRF52Board::powerOff();

variants/thinknode_m3/platformio.ini

@@ -24,7 +24,6 @@ build_flags = ${nrf52_base.build_flags}
   -D P_LORA_MOSI=46
   -D P_LORA_RESET=42
   -D P_LORA_TX_LED=PIN_LED_BLUE
-  -D P_LORA_TX_LED_ON=LOW
   -D LR11X0_DIO_AS_RF_SWITCH=true
   -D LR11X0_DIO3_TCXO_VOLTAGE=3.3
   -D MESH_DEBUG=1
@@ -105,7 +104,6 @@ build_flags = ${ThinkNode_M3.build_flags}
   -D BLE_TX_POWER=0
 ;  -D BLE_DEBUG_LOGGING=1
 ;  -D MESH_PACKET_LOGGING=1
-  -D GPS_NMEA_DEBUG
   -D OFFLINE_QUEUE_SIZE=256
   -D DISPLAY_CLASS=NullDisplayDriver
   -D PIN_BUZZER=23

variants/thinknode_m3/variant.cpp

@@ -80,16 +80,18 @@ void initVariant()
   digitalWrite(LED_POWER, HIGH);
 
   pinMode(PIN_LED_BLUE, OUTPUT);
+  digitalWrite(PIN_LED_BLUE, !LED_STATE_ON);
   pinMode(PIN_LED_GREEN, OUTPUT);
+  digitalWrite(PIN_LED_GREEN, !LED_STATE_ON);
   pinMode(PIN_LED_RED, OUTPUT);
+  digitalWrite(PIN_LED_RED, !LED_STATE_ON);
 
   pinMode(BUTTON_PIN, INPUT_PULLUP);
 
   pinMode(PIN_GPS_POWER, OUTPUT);
   pinMode(PIN_GPS_EN, OUTPUT);
-  pinMode(PIN_GPS_RESET, OUTPUT);
 
   // Power on gps but in standby
-  digitalWrite(PIN_GPS_EN, LOW);
+  digitalWrite(PIN_GPS_EN, !GPS_EN_ACTIVE);
-  digitalWrite(PIN_GPS_POWER, HIGH);
+  digitalWrite(PIN_GPS_POWER, GPS_POWER_ACTIVE);
 }

variants/thinknode_m3/variant.h

@@ -98,8 +98,9 @@
 #define PIN_GPS_POWER               (14)
 #define PIN_GPS_EN                  (21)            // STANDBY
 #define PIN_GPS_RESET               (25)            // REINIT
-#define GPS_RESET_ACTIVE            LOW
+#define GPS_POWER_ACTIVE            HIGH
 #define GPS_EN_ACTIVE               HIGH
+#define GPS_RESET                   (-1)
 #define GPS_BAUDRATE                9600
 
 ////////////////////////////////////////////////////////////////////////////////