Duplicates found between the L1 and L2 frontends, and inside the L2 one:
- geo::fmtLocShare / fmtLatLon / turnDeg / isAhead (GeoUtils.h): the [LOC]
text was built in five places, the turn angle and its "ahead" threshold in
both navigations, coordinates by hand in nine. Tested.
- LiveShareEngine::setEnabled: live share was switched in three places.
- L1 waypoint share uses WaypointModel::shareText; Trail's "Share my pos"
goes through UITask::quickShareMyLocation, so it now sends to a running
live-share session as the home Map page does.
- L2 Widgets.h: switchCreate (one switch size, was four), switchRow with a
state and callback (16 hand-wired copies), switchRowOpens (Bluetooth, WiFi,
GPS), primaryButton (one height for Save / Measure / New area / Update).
GPS: with it off, starting the trail, live share or track back, sharing or
marking a position, or centring the map asks first ("GPS is off") on both
L1 and L2; Cancel leaves it undone. A share or a mark waits for a fresh fix
(a switched-off module may still report its last one), which also fixes the
L1 "Share my pos" sending a stale position. SOS still turns the GPS on itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings: Name and Radio first, then Bluetooth, WiFi and GPS side by side
(a tap on each row opens its details: the pairing PIN, the networks, the GPS
screen with a new Options tab for power saving and the fixed position), then
Device, Mesh & data (Adverts & privacy now holds Auto-advert) and System.
Time & units, Power as one group. Row symbols get a column of their own, value
labels are as wide as their text, group headings are uppercase everywhere, the
auto-add node types show only with "By type". SOS in three groups, WiFi with
its switch, Map tools with the layers (Packet flow among them) under the trail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Same gap as the screens had: the bot reply, a typed message's {temp} and
the placeholder lists read only the sensors, so a board without one (the
L1) answered !temp with n/a while its telemetry carried a temperature.
The fallback moves to LocalSensors.h, shared by the screens, expandMsg()
and sensorPlaceholders(); the latter now takes the chip's temperature.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Bluetooth + USB (+ WiFi/Ethernet/UART per build) in one interface_manager,
as upstream; frames go to every enabled link, USB is read while BT is
connected. DUAL_SERIAL now means ENABLE_USB_INTERFACE.
- WiFi interface with upstream's wifi_* prefs and set/get wifi.* CLI.
- isClientConnected moved into ArduinoSerialInterface (DTR on nRF52 and
ESP32 native CDC).
- UI uses isBluetoothEnabled/enableBluetooth/disableBluetooth; turning BT
off leaves USB and the other links on.
- DualSerialInterface removed.
- Sim build gains DynamicConfigSerializer.cpp (broken since bd64c203).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Density from less chrome instead of smaller rows (ROW_H stays 44):
- titled screens drop the status bar; the title bar (APPBAR_H) holds back,
the title, the screen's actions and the time/battery on a pill; the status
bar returns for Home, the map, typing, the quick panel and the lock
- one radius (RADIUS) for everything tapped: buttons, tabs, choices, chips
- tabs are all segmented at TAB_H in the body (GPS, Clock converted)
- Nodes: chips row + sort + status line become one toolbar row with
Show / Order choices; Messages' All/Favourites is the same choice
- nav map: the target bar only while there is a target; the pin opens one
"Places" popup; back from a map options page restores the map and Map
tools as left, without a jump
- node detail actions at the top of the scroll; Home tiles fill the page
- rowsFit() leaves growing labels to the flex (a screen title cut to one
letter after Messages' filter changed)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-lvgl: navTextEntry()/TextEntry replace eight copies of popup + field +
keyboard wiring; one byte-capped insert callback instead of two.
- ui-new: drawHeadedBubble()/BubbleMark replace the duplicated DM and channel
bubble drawing in MessagesScreen.
- GpsSky::halt(): stopping the receiver ends an unfinished search but keeps
the first-fix time; keyboard cursor blink restarts after a key.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
The quick panel, as a phone's: pulled down from the status bar (or a tap
on it). Bluetooth, WiFi, GPS, sound, trail and live share switch at a
tap; Advert opens the advert popup (moved here from the Nodes header);
Lock locks the screen; a brightness slider. Holding a tile opens its
settings. Lock and sun glyphs added to the fonts.
Fixes from rc1 testing on the L2:
- GPS status icon: none when GPS is off (the module kept its last fix
valid, so it stayed green); grey on, green with a fix. ensureGps()
turns GPS on before trusting that stale fix.
- Screen wake: the panel wakes dark, a frame is drawn, then the
backlight fades in -- no white flash. Off fades out first.
- Power off / flat battery: the chip wakes every 30 s to look for USB
power and starts when plugged in (it slept with no wake source before,
until the reset button). Plugged in when switched off: stays off until
re-plugged.
- Message ages in a conversation refresh every 2 s, as on ui-new; the
message popup keeps its age, repeaters heard and delivery up to date.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New message, Nodes (and its Scan popup), Admin and Messages show their
items through one virtual list: a screenful of rows, handed to the next
item as one scrolls out, the scroll extent from the items' heights. 256
contacts: 522 objects and ~950 ms of filling in (frames up to 96 ms)
before, 19 objects at once now; a scrolled frame 28.5 -> 11.7 ms. Nodes
257 -> 49 objects. A new message rewrites Messages' rows in place
(46 -> 20 ms) instead of building the screen again; it's rebuilt only
when "Read all" comes or goes. A held row keeps what it shows until let
go. Perf tools: -D PERF_LISTS, -D PERF_LIST_MUL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A group row's text column (and an info row's key) grows into what the
controls on its right leave, and LVGL lays out children before their
parent, so its labels were first measured 1 px wide; LVGL also works out a
new label's height at its old width (0) before the real one. Each height
that changed then took another pass up the screen: 4-6 passes per screen.
rowsFit(), run before a frame's layout (LV_EVENT_REFR_START) and by
layoutNow() in place of every explicit lv_obj_update_layout(), gives each
new row's growing child the width the flex will give it, worked out from
the other children's styles and text, and labelFit() measures wrapping
labels at their real width up front. The grow stays, so a control that
can't be sized ahead only falls back to the old passes.
Layout on the device: Display page 34 -> 24 ms, Bot 33 -> 18, Quick
37 -> 22, Radio 26 -> 18, Diagnostics 20 -> 12. Sim screenshots of 26
screens unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The editor has its own 80 % dim layer, not a popupOpen() one, so every
key press redrew the list under it and blended the dim over it. It now
freezes the screen like the popups (freeze::now); the frozen image takes
the dim layer's own level instead of assuming 60 %.
Keyboard redraw 38.7 -> 29.7 ms, full frame 46.3 -> 39.7 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The WiFi and Bluetooth rows rebuilt the whole Settings page to update
their hint, cutting the switch's animation short; the hint is now
rewritten in place (rowHintSet). The "Bluetooth on" echo toast is gone.
- Map download: a 404 gets the same one retry as other errors
(OpenTopoMap sends the odd 404 for a tile not rendered yet), and a
download that ends with gaps says "Done, N missing - download again".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every toggle / stepper wrote the prefs file straight away (0.1-0.6 s on the
ESP32's SPIFFS), which stuttered the UI and wore the flash. prefsSave() now
only marks them dirty; they're written once when the screen is left, when the
display goes off, or after 60 s at the latest -- the L1's approach. Shutdown
and the pre-restart OTA save still write immediately.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
group() / settingRow / listRow / actionRow / choiceRow / groupNote: one card
per section, hairlines between rows, hints that wrap. Dropdowns replaced by
a centred picker list. Settings regrouped (Device, Connections, Map & data,
System); Display & power split into Display, Power and Time on L2 only
(the shared schema is unchanged), Keyboard and About get their own pages.
Radio and Repeater share one LoRa parameter block.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Anim.h: screens emerge from the middle (background cover fades, content
drifts 6 px), Home pages slide, popups and toasts rise and fade in
- Theme.h: accent rules (fill = primary action, dim fill = selected, text =
names/counts/modes), theme layer over the default theme, radius tokens,
accent colour picker (Settings > Display & power > LOOK, NVS mc_ui)
- Splash with the Solo and upstream versions
- Status icons in equal cells, L1-style relay marks, path window with a hop
diagram, tile download popup fits the screen (WiFi only in Settings)
- Perf: uncompressed fonts, two 120-line PSRAM buffers (~48 -> ~33 ms per
transition frame); UI_PERF_TEST harness
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Map tools hold trail, live share and arrival alert, with their options
(schema page "Map options") behind one button; back returns to the map
- Nearby gets an advert button: send now (nearby / everyone) + auto-advert
- Home page 3: Repeater, Admin (list of repeaters and room servers),
Diagnostics
- Settings: display, sound, radio (Bluetooth, WiFi), system, keyboard,
contacts & messages; units moved to Display & power
- Status bar: Bluetooth, GPS, alarm, mute, then auto-advert, trail, live
share, repeater, arrival alert in the accent colour
- Fonts: key and route glyphs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JakubandClaude Opus 5.5