gat562_30s_mesh_kit has an always-on external PA rated at +30dBm, but the
firmware wrote tx_power_dbm straight to the SX1262 register (capped at 22),
so the app/CLI/UI never matched the real radiated power and couldn't ask
for more than 22 even though the hardware supports it.
Add a generic, macro-gated PA gain-curve resolution in
RadioLibWrapper::setTxPower() (the single choke point every TX-power path
already funnels through), reusable by any future board with a similar PA.
For this board, reuse the vendor-measured 869MHz curve from the open
upstream Meshtastic PR that added it for the same physical module
(meshtastic/firmware#11212): pick the lowest SX1262 setting whose measured
output reaches the requested dBm, clamped at the PA's saturation knee.
Bump LORA_TX_POWER/MAX_LORA_TX_POWER to 30 for this variant only -- the
other three GAT562 boards use the SX1262's own PA_BOOST (22dBm, no
external PA) and are unaffected.
Since a request below the PA's floor gain (14dBm) still radiates at that
floor, also make CommonCLICallbacks::setTxPower() return what was actually
applied, and have every setter (BLE CMD_SET_RADIO_TX_POWER, CLI "tx",
simple_repeater/room_server/sensor) persist and report that value instead
of the raw request -- so tx_power_dbm never silently disagrees with the
physical output in either direction.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Settings > Contacts gains "Expire" (Off/7d/30d/90d) and a "Prune now" action
that counts first and asks before removing anything. A contact with no
advert/update within the threshold is eligible; favourites are always kept.
Thresholds and their labels live in one NodePrefs table so the age shown and
the age enforced can't drift. SCHEMA_SENTINEL -> 0xC0DE002C (sizeof unchanged
at 2824, confirmed on native and a real WioTrackerL1 build).
Also fixes four bugs in the scope list from 89c02eea:
- removeScope() saved /scopes1 but never savePrefs(), so the ch_scope_idx[]
and repeat_extra_scope_mask fix-ups it makes were lost on reboot, leaving
shifted entries against unshifted indices.
- CMD_SET_DEFAULT_FLOOD_SCOPE wrote the legacy fields directly instead of
going through setPrimaryScope(), so the app's default-scope setting had
nothing reading it once sends resolved through the list.
- The reverse direction was stale too: an on-device "Set as default" never
refreshed default_scope_name/key, so CMD_GET_DEFAULT_FLOOD_SCOPE reported
a scope the device had stopped using. New syncLegacyDefaultScope().
- Upgrading from the old single Scope field set the default (so DMs kept it)
but left every channel unscoped, since "*" means unscoped, not "inherit".
loadScopeList() now reports when it migrated and begin() seeds the channels
that already exist, leaving empty slots alone.
"Set default" -> "Set as default", and setting it now says what it governs
("Default: DMs + relay") rather than leaving the [default] marker to imply
more than it does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
One nRF52840 variant shared across both radios, picked per env: Duo runs
the LR1121, Uno the SX1262. Same PCB, only the radio and its DIO1 pin
change.
SuperIO adds the SH1107 OLED, GPS, buzzer and joystick. GPS is driven by
the 3-position mode switch (Mode 2 = on), polled live the way thinknode_m1
does it.
Five quick user-button presses power the unit off; a press wakes it back
on (arms the button as an nRF52 GPIO SENSE source before SYSTEMOFF).
Consolidates #2054 and andyshinn's shared-base/uno work, rebased on dev.
Co-authored-by: lbibass <ewdries02@gmail.com>
Co-authored-by: Andy Shinn <andys@andyshinn.as>
Replace the single device-wide Scope text field with a small named list
(wildcard "*" fixed first, plus a movable default): each channel picks one
scope of its own (matching the app's per-channel region picker, surfaced in
the channel-history title), and the repeater's Extra scopes multi-selects
from the same list instead of comma-typed names. Both pickers are popups
(PopupMenu gains addCheckItem()/a fillable-square checkbox glyph) over the
existing screen rather than a full-screen takeover.
Also fixes a stray-bits bug where a pre-existing prefs file's own sentinel
tail could read into the new repeat_extra_scope_mask/ch_scope_idx fields and
silently reappear as a real pick later once the scope list grew into that
range.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Unselected message bubbles no longer carry a stray light-filled header
strip behind the sender name -- the one place with a filled patch on an
otherwise plain row. Selected fill is unchanged.
- Received DMs and channel posts now show their hop count as the same tiny
digit icon a sent message already uses for its repeater/echo count, using
the hop path the mesh already records for incoming messages.
- DM/channel history list: UP at the oldest message now wraps straight to
the newest (not the compose row), closing the loop the same way every
other list in the UI does at its ends.
- A received message's age no longer goes blank when its timestamp reads
slightly ahead of the device's own clock (sender/receiver skew, or an
unsynced receiver) or is genuinely unknown -- both now show the receipt
time instead of leaving the row with just a name and hop count.
- release-notes.md: add the v1.28 section covering the above plus this
cycle's already-committed dev fixes (GPS altitude field, units
compliance, noise floor, Msg wake location, bot relay tracking, PR #34).
- Add .github/workflows/build-solo-sim.yml: builds the companion+repeater
WASM sim via Emscripten and attaches it as a fixed-name asset to the tag's
draft release, independent of the hardware firmware build job.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Every other list in the UI (contacts, channels, message-pick, the
mode tabs) wraps at its ends; the DM and channel history lists were the
one exception -- UP at the oldest message (top of the list) just
stopped instead of wrapping to the compose row (the list's own
bottom-most stop), and DOWN from the compose row didn't wrap back to
the oldest either. Both directions now close the loop, same as
everywhere else.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Add a separate "Altitude (GPS)" dashboard field (label AltG) alongside
the existing barometric one (now labelled "Altitude (Baro)") -- the
original single Altitude field only ever read a barometric sensor's
CayenneLPP telemetry, showing "--" on any board without one even with
a perfectly good GPS fix.
- Every altitude reading (baro + GPS, Clock and Lock screen) and the GPS
home page's "alt" row now go through a shared fmtAlt() helper and
respect Settings > System > Units, same as every other distance in the
UI -- none of them checked units_imperial before. Same fix for
Locator's Radius row, which always showed metric regardless.
- Radio home page's noise floor showed "n/a" whenever Pwr save (RX
duty-cycle) was on, on the assumption duty-cycle RX can't sample the
floor. That's stale: RadioLibWrapper already periodically recalibrates
it (noiseFloorCalibCheck(), every 60s) even under duty-cycle, which is
exactly why Diagnostics' unconditional read of the same value was
already showing something real. Radio home page now matches.
- Moved "Msg wake" from Settings > Sound to Settings > Display -- more
logical home for a display-wake toggle than notifications. Menu-order
only; NodePrefs storage is unaffected by this enum's ordering.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Payloads of 166 or 167 bytes previously passed the frame-sized bound
(MAX_CHANNEL_DATA_LENGTH = 167) but were rejected by sendGroupData
against MAX_GROUP_DATA_LENGTH (165), causing ERR_CODE_TABLE_FULL (retry
later) to be returned instead of ERR_CODE_ILLEGAL_ARG.
Fixes#3345
Remote Bot's channel trigger reply, channel command reply, and !gps fix
result all mirrored their send into the on-device history with
addOwnChannelMsg() but never called armChannelRelay() afterward, unlike
the app's CMD_SEND_CHANNEL_TXT_MSG send which already did both -- so a
bot's own channel posts never showed which repeaters echoed them back,
while everything else did.
Factor the always-together pair (mirror into history, then arm relay
tracking from the send sendGroupMessage's sendFloodScoped already
tracked) into MyMesh::mirrorOwnChannelMsg(), and route all four call
sites through it instead of pairing the two calls by hand -- the bot
bug was exactly a dropped second call, so a new call site can no longer
add the first half without the second.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
fix: Fix message channel list not updating instantly
Creating a channel didn't rebuild the Messages screen's cached channel
list until you backed all the way out and reopened it. Tracks whether
the Add/Edit channel form was active on the previous render and rebuilds
the list once it closes.
Same staleness bug as the build-date fallback: bypassing build.sh (a
direct `pio run`, an IDE Build button, the sim) fell back to a hardcoded
"v1.27-dev" literal that would silently keep claiming to BE v1.27 forever,
even once development has moved well past it. build.sh/CI's real
git-tag-derived FIRMWARE_VERSION is untouched -- only the bypass fallback
changes, to a version-agnostic "dev-<build date>".
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three v1.27 changes this cycle weren't reflected yet: the low-battery/
reboot contacts-persistence fix (matching the settings one already
documented), the Clock page's new Sats field, and the Path/Relayed by
popup's marquee glitch + slowness fix.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Settings > Reboot, the phone app's CMD_REBOOT, and the serial CLI's
"reboot" command each hand-rolled their own flush-then-board.reboot()
sequence, so each could drift independently (Settings > Reboot and the
CLI command were both missing the contacts flush added in the previous
commit). Add a pure-virtual AbstractUITask::shutdown(bool restart) --
every UI variant (ui-new/ui-tiny/ui-orig) already implements a method
with this exact signature -- and route all three call sites through it
instead. CMD_FACTORY_RESET intentionally keeps calling board.reboot()
directly: flushing stale in-RAM prefs back out would defeat the format
it just did.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Contact updates (advert path cache, new/removed contacts, favourites) are
lazily debounced (dirty_contacts_expiry, 5s) to avoid wearing flash on
every mesh packet. CMD_REBOOT already flushed this before rebooting, but
UITask::shutdown() -- the low-battery auto-shutdown and long-press
power-off path -- didn't, so under continuous mesh traffic (which keeps
re-arming the debounce timer) a pending write could sit unflushed for a
whole session and be lost when one of those paths fired. Add
MyMesh::flushDirtyContacts() and call it from shutdown() alongside the
existing savePrefs()/saveRTCTime() flush.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Two distinct bugs behind "Relayed by" scrolling looking broken:
1. The DM/channel history row underneath a context menu (Path/Relayed by,
Options, etc.) keeps rendering every frame with sel=true regardless of
the popup on top of it, and both it and the popup's own selected item
share DisplayDriver's single marquee slot. Whichever drew last each
frame kept is_new-resetting the other's animation -- looked like the
scroll "remembered" a stale, wrong position. Now suppressed via
`sel && !_ctx_menu.active` at all four call sites that had it (DM/
channel history bodies, contact/channel pick names).
2. PopupMenu::render() returns 50 (it wants a fast, smooth redraw), but
all 7 `_ctx_menu.render(display)` call sites discarded that return
value, so the enclosing phase's own return statement (500-2000ms)
governed the actual redraw cadence instead -- the popup's marquee only
ever advanced whenever the much slower underlying screen happened to
redraw. Now folded into the existing mq_delay accumulator, same as
every other marquee source in this file.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
3urobeat
Scott Powell
JakubandClaude Sonnet 5
Liam CottleandGitHub
Und3r_1337
Frieder SchrempfandGitHub
AvamanderandGitHub
Huw DuddyandGitHub
TadyTheFish
João Brázio
tekk
Yoshi Walsh