14 Commits

Author SHA1 Message Date
MarekZegare4
be9f3db8c6 feat(companion): on-device room login with saved passwords
Log in to a room server from the device UI with no phone app: picking a
room prompts for its password (blank allowed for open rooms), and a
context-menu "Login..." allows re-login. Successful passwords are
persisted to a dedicated /room_pw file so a previously-used room logs
back in after reboot without retyping; a failed login forgets the
(now-stale) saved password so the next attempt prompts again.

The room-password file is written via a temp file + atomic rename
(new DataStore::commitFile helper), matching the crash-safety of
contacts/channels persistence.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-26 10:55:24 +02:00
Jakub
f5b3213f80 Merge upstream/main (v1.16.0) into wio-unified
Merge 254 upstream commits. Highlights relevant to the Wio fork: native
NRF52 companion power-saving (sleep when !hasPendingWork), preamble 16->32
for SF<9, generic sensor-registration model, CMD_SEND_RAW_PACKET, isEink()
display abstraction, KEEP_DISPLAY_ON_USB, contacts-sync/transient fixes.

Conflicts resolved (11 files):
- buzzer.h/.cpp: keep NRF52 include guard + our begin()->startup(); fold in
  upstream doc comment.
- platformio (wio + eink): keep our slim env layout, add upstream kiss_modem
  env (+ debug_tool=stlink on eink ble).
- GxEPDDisplay.h: take upstream isEink() override.
- EnvironmentSensorManager.h: take upstream's wider #if guard.
- DataStore.cpp: take upstream saveContacts(filter) signature, keep our
  ::openWrite (member openWrite would shadow the global 2-arg overload).
- main.cpp: keep our watchdog init + add board.onBootComplete(); adopt
  upstream's `if(!hasPendingWork()) sleep` loop.
- MyMesh.h: version -> v1.16-solo.0, build date 6 Jun 2026.
- MyMesh.cpp: keep both CMD codes (SCREENSHOT 66 + RAW_PACKET 65), both field
  inits, both handlers, our screenshot fns + upstream saveContacts/save_filter,
  upstream hasPendingWork() + our MyMeshBot include.
- UITask.cpp: keep our solo splash/clock page/snprintf/buzzer init; merge
  auto-off (+ opt-in KEEP_DISPLAY_ON_USB); merge low-batt shutdown (our EMA +
  prefs threshold + upstream's !isExternalPowered() guard and eink-aware delay).

Post-merge drift fixes (upstream API/architecture changes, not conflicts):
- applyTxPower(): radio_set_tx_power() removed upstream -> radio_driver.setTxPower().
- Sensor refactor dropped the per-sensor *_initialized flags our
  getAvailableLPPTypes() relied on; removed that override and the SENSORS page
  now derives available LPP types from the populated sensors_lpp buffer.

README kept ours via .gitattributes merge=ours. Builds verified on all 5 Wio
envs (dual, eink dual, radio_ble, dual_dev, eink_dual_dev). Not yet
hardware-verified.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-06 17:21:41 +02:00
Scott Powell
d9df8307ca * first draft 2026-06-01 16:49:31 +10:00
Jakub
2671e3f764 feat(ui): Trail phase 4 — Save/Load to flash + GPX export over USB
Single-slot persistence as agreed. Action popup grows three entries
(conditional on what makes sense for the current state):

- "Save trail"  — writes the current RAM ring to /trail in LittleFS.
- "Load trail"  — only shown when /trail exists; replaces the live ring
                  with the snapshot (any active session ends first).
- "Export GPX"  — dumps the trail as a minimal GPX 1.1 document over
                  Serial so the user can capture it from a USB host.

Plumbing:
- TrailStore gains writeTo / readFrom (template on the file handle, so
  the platform-specific File flavour stays out of Trail.h) plus
  exportGpx(Stream&) for the GPX serializer. Header carries magic
  "TRAL", a version byte, point count, and the accumulated active time
  so elapsed survives the round trip.
- DataStore::openWrite is exposed publicly so callers outside DataStore
  don't have to duplicate the platform open-mode dance.
- MyMesh gains a public getDataStore() accessor.

After Load, _pending_seg_break is set so any subsequent Start opens a
new segment instead of joining the loaded last point.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-26 07:49:17 +02:00
Jakub
1fe5922c79 Add RTC time persistence to flash
Save last known unix timestamp to /rtc_save on shutdown and restore it
on startup, so the clock shows correct time immediately after restart
without waiting for GPS fix.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-13 21:09:47 +02:00
taco
e6e1b810f8 add DataStore::deleteBlobByKey() 2026-02-01 00:02:29 +11:00
taco
3d83556829 refactor: use _getContactsChannelsFS() instead of ifdefs 2025-09-06 14:15:40 +10:00
taco
2b24c575c7 support dual filsystems on nrf52
store identity and prefs in UserData and contacts, channels and adv_blobs in ExtraData
2025-09-06 14:15:40 +10:00
Scott Powell
a7c959631f * companion: added Datastore methods: getStorageUsedKb(), getStorageTotalKb()
* companion: CMD_GET_BATTERY now changed to CMD_GET_BATT_AND_STORAGE
2025-06-20 16:47:59 +10:00
liamcottle
a22c176d45 add rm command to remove file 2025-06-07 15:44:36 +12:00
liamcottle
0f601752e4 implement ls and cat commands for rescue mode 2025-06-07 15:23:55 +12:00
Scott Powell
9c833486bf * DataStore, advert blob record format change 2025-06-06 21:35:54 +10:00
Scott Powell
dd808ee6c7 * new nRF52 impl for advert blobs 2025-06-06 19:50:51 +10:00
Scott Powell
6e0b505a2a * companion: refactor of all filesystem access to new DataStore module 2025-06-06 15:30:35 +10:00