The light theme read as the dark one inverted. Now something selected (a
tab, a segment, a tile, Fav) is a tint of the accent with the accent's text
(SEL_*), the full accent fill stays for the primary action; setting values
read in grey (VALUE); popups, the banner and the toast have a quiet grey edge
(EDGE), the toast is a dark pill; neutral greys the RGB565 panel keeps
neutral; the big clock graphite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WiFi starts and joins on internal RAM: ~42 KB the first time, ~25 KB after,
more for WPA. Free internal RAM had shrunk to ~20 KB after opening the map
(the tile decoder's 12 KB stack, the 32 KB I-cache, the DMA draw buffers,
UI statics), so a scan failed at once (esp_wifi_init: no memory) and a join
during a tile download timed out (AUTH_EXPIRE).
- ESP-IDF: CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY, and the esp_timer
task stack 8 -> 4 KB (it uses ~0.4 KB). Rebuild the framework libs:
pio run -e Wio_Tracker_L2_idf_libs.
- PSRAM_BSS (EXT_RAM_BSS_ATTR) on the UI's big statics: QR codes, map
state, charts, lists. .dram0.bss 115 -> 66 KB.
- The tile decoder's and fetcher's task stacks in PSRAM.
Free internal RAM, idle: 48 -> 105 KB; WiFi up: 57 KB, 29 KB at the
lowest while downloading tiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ACCENT_DIM (the accent mixed toward black) came out brown on selected
tabs, chips, segments and own bubbles. They take the accent with dark
text now, as primary actions and the quick panel tiles do:
styleSelected() sets the fill, the pressed shade and every label under
it. Own bubbles: dark text, age and delivery mark (green or red can't be
read on amber); the melody editor's selected note is outlined, the
sounding one filled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Battery curve: NodePrefs batt_curve_mv[11] (voltage at 0..100 %, all
zeros = built-in LiPo curve, sentinel 0xC0DE0032). ui-core/Battery.h
uses it for every percentage. L1: Settings > System > Batt curve list
(Left/Right 10 mV, Reset); L2: Settings > Power > Battery curve chart
with draggable points and a line at the cell's voltage.
- L2: the Nodes map is the full navigation map plus the nodes, Back
returns to Nodes; the favourite button is lit while it is one; pinning
to the Home dial uses a thumbtack (fonts regenerated); minimap dots
follow the accent; arranging tiles shows where they land while dragging;
emoji row in Diagnostics > Font.
- Sim hooks: sim_open nodesmap / accent@N / homeedit / battcurve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New message, Nodes (and its Scan popup), Admin and Messages show their
items through one virtual list: a screenful of rows, handed to the next
item as one scrolls out, the scroll extent from the items' heights. 256
contacts: 522 objects and ~950 ms of filling in (frames up to 96 ms)
before, 19 objects at once now; a scrolled frame 28.5 -> 11.7 ms. Nodes
257 -> 49 objects. A new message rewrites Messages' rows in place
(46 -> 20 ms) instead of building the screen again; it's rebuilt only
when "Read all" comes or goes. A held row keeps what it shows until let
go. Perf tools: -D PERF_LISTS, -D PERF_LIST_MUL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A group row's text column (and an info row's key) grows into what the
controls on its right leave, and LVGL lays out children before their
parent, so its labels were first measured 1 px wide; LVGL also works out a
new label's height at its old width (0) before the real one. Each height
that changed then took another pass up the screen: 4-6 passes per screen.
rowsFit(), run before a frame's layout (LV_EVENT_REFR_START) and by
layoutNow() in place of every explicit lv_obj_update_layout(), gives each
new row's growing child the width the flex will give it, worked out from
the other children's styles and text, and labelFit() measures wrapping
labels at their real width up front. The grow stays, so a control that
can't be sized ahead only falls back to the old passes.
Layout on the device: Display page 34 -> 24 ms, Bot 33 -> 18, Quick
37 -> 22, Radio 26 -> 18, Diagnostics 20 -> 12. Sim screenshots of 26
screens unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Found by counting flushes on idle screens in the sim:
- The compose field's cursor blinked (a redraw every 400 ms) as soon as
a conversation opened, the keyboard hidden: lv_keyboard_set_textarea()
focuses the field, and LVGL only stops a blink when the cursor moves.
fieldFocus() sets the state and nudges the blink; also used for the
WiFi and channel fields, which left theirs running.
- lv_obj_align_to() restyles on every call, so the status bar's icons
redrew every second; placeLeftOf() moves them only when they move.
- Text colours set every second (nav bar, GPS status, Diag errors) go
through setTextColor(), which skips an unchanged colour.
- A LV_LABEL_LONG_DOT label writes its "..." into its own text, so
setText() never matched and rewrote it every refresh (the nav bar's
hint); labelShows() reads past the dots.
- The map area, the area-outline, trail and vector-label layers were
invalidated on every map refresh (every 3 s, a full-map redraw); now
only when the view or what they draw changed.
Idle map: 17 -> 1 flush in 5 s; list and settings screens: 0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dead code gone: anim::fadeHide, radioctl::presetCount, the L2 board's
setSdPower / setGrovePower / expanderOK (awRead, gnssReset now private).
- buttonBar() / barButton() replace 7 copies of the popup button row.
- confirmBody(): one red-button confirm for reboot / power off, reset
counters, admin commands, preset and scope delete.
- tapConfirmed(): the 11 "tap again" buttons share one mechanism, 3 s
everywhere, the label restored when left alone.
- noteLabel() for ~30 wrapped notes.
- localTm() in NodePrefs.h and one MONTHS table: lvgl, MsgExpand, the L1
clock and lock screen.
- The sim keeps UI settings in an in-memory nvs::, so one set of load /
save helpers serves both.
- Asleep, the loop wakes every 50 ms (the button / touch poll), not 20.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every toggle / stepper wrote the prefs file straight away (0.1-0.6 s on the
ESP32's SPIFFS), which stuttered the UI and wore the flash. prefsSave() now
only marks them dirty; they're written once when the screen is left, when the
display goes off, or after 60 s at the latest -- the L1's approach. Shutdown
and the pre-restart OTA save still write immediately.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
group() / settingRow / listRow / actionRow / choiceRow / groupNote: one card
per section, hairlines between rows, hints that wrap. Dropdowns replaced by
a centred picker list. Settings regrouped (Device, Connections, Map & data,
System); Display & power split into Display, Power and Time on L2 only
(the shared schema is unchanged), Keyboard and About get their own pages.
Radio and Repeater share one LoRa parameter block.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Power: the UI loop sleeps until something is due (never with packets
queued); screen off puts the CPU at 80 MHz, the GT911 to sleep (unless a
tap wakes the screen) and the LP5814 in standby. GPS off now cuts the
L76K's rail and UART on the L2 (L2GpsProvider). The battery divider is
powered only for a reading (measured: settles at once); readings within
2 s are reused. The SD mount is retried at most every 5 s.
Fixes: WiFi left on after leaving a scan, live tiles' WiFi kept with the
screen off on the map, an ADC read every second for the status bar, touch
polled on every pass while dark, a scan cutting an update's WiFi, relay
count not refreshing in a channel thread, raw @[nick] in room previews.
Labels skip unchanged text (no redraw).
Helpers: scrollList, dimOverlay, settingRow, flexBox, nvs::get/put,
trailFilePath (a second save in the same minute no longer overwrites),
unreadTotal. Dead code removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Unlocking fades the lock screen out while the screen underneath drifts
into place; the slider unlocks on letting go at the end and springs back
when let go earlier
- Channel names no longer get a "# " prefix (thread title, channel popup,
live share targets) -- "#" marks a hashtag channel; favourite contacts in
the live share list are starred instead
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Anim.h: screens emerge from the middle (background cover fades, content
drifts 6 px), Home pages slide, popups and toasts rise and fade in
- Theme.h: accent rules (fill = primary action, dim fill = selected, text =
names/counts/modes), theme layer over the default theme, radius tokens,
accent colour picker (Settings > Display & power > LOOK, NVS mc_ui)
- Splash with the Solo and upstream versions
- Status icons in equal cells, L1-style relay marks, path window with a hop
diagram, tile download popup fits the screen (WiFi only in Settings)
- Perf: uncompressed fonts, two 120-line PSRAM buffers (~48 -> ~33 ms per
transition frame); UI_PERF_TEST harness
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- genericBuzzer I2S path (BUZZER_I2S): an audio task synthesises the notes
with eased edges and keeps the DMA queue fed with silence between sounds;
ES8311 setup; amp powered through the board only around sounds
- ui-core/SoundControl.h (mode, volume, built-in sounds, melody model),
SoundNotifier moved to the Core, chanctl::melody, schema Sound page
- L2: notifications, alarm / timer ring, locator sounds, Settings > Sound,
melody editor with the playing note lit, per-chat sound, mute icon
- noteIndex() on every buzzer backend; scrolling popups past screen height
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ChannelControl (add Public/Hashtag/Private, rename, delete, notif/fav/scope)
and Favourites slots move into ui-core; ui-new uses them. Contact / channel
pref cleanup moves from ui-new's UITask into UiCore so it runs on every
frontend (L2 had none). L2: channel options popup (hold a row or the gear
in a channel) and the Add / Edit channel form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JakubandClaude Opus 5.5