The shared on-screen keyboard seeds {loc}/{time} placeholders on begin()
for message composition, but they make no sense in a radio-preset name.
Clear them right after opening the keyboard from the "+ Save current..."
flow in both Settings > Radio and Tools > Repeater; the message-slot
editor still keeps them.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every drawList/AccordionList row opened with the same hand-written
display.drawSelectionRow(0, y-1, width-reserve, lineStep-1, sel) line —
14 copies of the same geometry and magic offsets. Add a drawRowSelection(d,
y, sel, reserve) helper in icons.h next to drawList and route the canonical
sites through it (Bot/LiveShare/Locator/Repeater/Settings/Tools/Nearby/
QuickMsg/Waypoints).
Rows that intentionally differ (full-width DashboardConfig/QuickMsg, the
keyboard/ringtone grids) keep their explicit drawSelectionRow() call — the
helper is opt-in rather than baked into drawList, so legitimate variants
aren't forced into one geometry. Framework doc updated to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The "_dirty bool, then if (_dirty) the_mesh.savePrefs() on exit" pattern was
duplicated across 9 screens with subtle divergence: some cleared the flag
after saving, some left it set and relied on onShow() to reset. Replace all
12 exit sites with a single _task->savePrefsIfDirty(flag) helper that saves
once only if dirty and always clears the flag, so the "did we touch flash?"
answer lives in one place and the reset is consistent.
Edit sites still mark the flag manually (inherent to change tracking); only
the persist-on-exit boilerplate is centralised.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the ad-hoc enter()/markClean() entry methods (which lived outside
the UIScreen interface and were invoked via casts from each gotoX) with a
virtual onShow() lifecycle hook called centrally by setCurrScreen().
This removes the "forgot to call enter() in a new navigator" footgun and
the unchecked cast smell: 12 navigators collapse to one-line
setCurrScreen(x) calls, and override enforces signature match. Two entries
that carry a parameter/variant keep an explicit typed call after
setCurrScreen(): RingtoneEditor::selectSlot(slot) and TrailScreen::showMapView().
Behaviour-preserving: only screens that previously had enter() get an
onShow() override; Splash/Home/QuickMsg/Diag keep no reset as before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Audit pass against docs/design/solo_ui_framework.md, converging deviations:
- prev/next: replace hand-rolled (c == KEY_LEFT || c == KEY_PREV) with
keyIsPrev()/keyIsNext() in QuickMsgScreen, RingtoneEditor, TrailScreen,
FullscreenMsgView. Two were real rotary-encoder gaps, not just style:
NearbyScreen's filter and WaypointsView's hemisphere toggle used raw
KEY_LEFT/RIGHT with no encoder twin, so the encoder couldn't drive them.
- NearbyScreen's list right column used a manual setCursor(width -
getTextWidth(...)) instead of the existing drawTextRightAlign() helper
(which also UTF-8-translates) — now uses it, like Diagnostics/Repeater.
- RepeaterScreen hand-rolled the whole drawList skeleton (scroll clamp +
reserve + row loop + indicator); collapsed onto drawList().
No D-pad behaviour change; more uniform encoder support. Net -19 lines.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The manual Freq/SF/BW/CR editing was duplicated near-verbatim between
Settings › Radio and Tools › Repeater — same digit-by-digit Freq editor,
same SF/BW/CR step bounds, differing only in the target fields and the
apply call. Extract RadioParamsEditor (freq DigitEditor + static SF/BW/CR
steppers), with no dependency on UITask or the radio driver: the screen
passes the freq bounds in, the same way RadioPresetPicker stays decoupled.
Completes the preset-picker consolidation.
Behaviour preserved: a step at the range limit changes nothing and isn't
consumed (falls through), as before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings › Radio and Tools › Repeater had near-identical preset-picker
logic (name/list-index lookup, save/delete, popup build, selection
handling) plus their own copy of the nearest-bandwidth search — only the
target fields (companion params vs. dedicated repeater profile) and the
apply call differed.
Extract the shared logic into RadioPresetPicker (a Target of field
pointers + a Result the screen acts on), with no dependency on UITask so
each screen keeps its own apply/dirty/keyboard/alert handling. Move the
nearest-bandwidth search to nearestBwIndex() in RadioPresets.h. Removes
~6 duplicated methods and 4 state fields from each screen.
Verified: WioTrackerL1_companion_solo_dual builds clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Repeater screen's preset picker only let you pick an existing
preset, not save the current profile as a new one or remove a saved
one — the only way to manage user presets was from Settings > Radio,
even though the repeater profile is a separate set of freq/sf/bw/cr
values.
Ports Settings' "+ Save current..." / "- Delete preset..." popup flow
onto the repeater profile fields, reusing the same shared on-screen
keyboard (UITask::keyboard()) and the same 4 NodePrefs::user_radio_presets
slots — a preset saved from either screen shows up in both, since it's
the same underlying array.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Settings > Radio gains a repeater toggle, 16 community-suggested radio
presets plus manual Freq/SF/BW/CR tuning (digit-by-digit Freq editor),
4 persisted user preset slots, and the packet pool bumped 16->32 so
queued retransmits stop starving incoming-packet allocation while
relaying.
Four opt-in politeness knobs (skip-advert, max-hops, yield, min-SNR),
all flood-only and off by default, plus overhear suppression that
cancels a queued retransmit if a peer relays the same packet first.
Adaptive Power Control is suppressed while relaying (pins TX power to
the ceiling) and duty-cycle RX is forced off, since a repeater needs
to hear and relay at consistent power.
A dedicated Tools > Repeater screen consolidates the toggle, the
politeness knobs, and live forwarding stats, plus an optional "Custom"
radio profile — a dedicated frequency/SF/BW/CR for relaying, separate
from the companion's own network, band-matched to the companion
frequency by default and used everywhere a radio change can happen
(boot, on-device toggle, app-driven CMD_SET_RADIO_PARAMS, Settings
radio edits) so the device never silently falls back to the wrong
params mid-relay.
Diagnostics gains the actually-forwarded packet count, real heap-free
via mallinfo(), a reset-counters popup, and hardened loop-detect
bounds. Also: a frequency-floor fix and a float-equality preset-match
fix in the repeater profile logic, deduped BW-table/valCol/profile-
seeding helpers shared between Settings and the Repeater screen, and
a build.sh fix tolerating control characters in `pio project config`'s
JSON dump.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
JakubandClaude Opus 4.8
MarekZegare4andClaude Opus 4.8