Replace the ad-hoc enter()/markClean() entry methods (which lived outside
the UIScreen interface and were invoked via casts from each gotoX) with a
virtual onShow() lifecycle hook called centrally by setCurrScreen().
This removes the "forgot to call enter() in a new navigator" footgun and
the unchecked cast smell: 12 navigators collapse to one-line
setCurrScreen(x) calls, and override enforces signature match. Two entries
that carry a parameter/variant keep an explicit typed call after
setCurrScreen(): RingtoneEditor::selectSlot(slot) and TrailScreen::showMapView().
Behaviour-preserving: only screens that previously had enter() get an
onShow() override; Splash/Home/QuickMsg/Diag keep no reset as before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tick marks, the scale baseline and the travel-direction pointer triangle
were hardcoded pixel constants, so they shrank to near-invisible slivers
next to the 2x cardinal labels and numeric readout on landscape e-ink.
Same fix pattern as the trail map / keyboard separator: derive sizes from
miniIconScale()/sepH() instead.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Content drawn under the title separator touched the line on every standard
screen, because listStart() == headerH() (the row right after the separator).
Graphical screens worked around it with a hand-rolled hdr+2.
Bake a 2px breathing gap into listStart() so every list gains it at once, and
switch the screens that hand-rolled the offset (Compass, Nav, Nearby detail) to
listStart() so the content top is computed the same way everywhere.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- drawList(): scrollable list skeleton (visible window, keep-sel-in-view,
scroll-column reserve, per-row callback, indicator). Migrate Tools, Bot,
Nearby, Waypoints list and the three QuickMsg lists onto it; centralises the
scroll-clamp/reserve/indicator that each had open-coded (and inconsistently).
- drawCenteredHeader(): centred title + separator, replacing the duplicated
two-liner across ~10 screens (incl. QuickMsg, which used width()/2 spacing and
was missed before); unifies the separator at headerH()-sepH().
- keyIsPrev()/keyIsNext() in UIScreen.h for the LEFT||PREV / RIGHT||NEXT idiom;
applied to 6 screens, behaviour-preserving. Cancel/context-menu stay
per-screen (they mean different things on different screens).
- rotLabel() dedups the 0/90/180/270 array in Settings.
- Unify selection-row height to lineStep()-1 (Tools/Bot matched the rest).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The shrunken ring left only a few-pixel needle in the OLED's short vertical
space. Switch to a linear heading tape: a fixed travel-direction pointer at
centre over a scrolling N..E..S..W scale (30° ticks, N/E/S/W labelled),
with the large degrees+cardinal readout below. The tape is purely linear
(no trig) and uses the available width, so it stays readable on the small
panel. Update the Compass docs to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The N/E/S/W letters rode on the ring radius, so they overlapped the circle
as the card rotated. Place the letters on an outer radius and draw the ring
a glyph-height smaller, leaving a clear gap between them. The forward index
now sits in that gap, just outside the ring.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The no-heading hint was centred on the compass circle, overlapping the
ring. Draw it in the bottom readout band instead so the ring stays clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
drawLine was duplicated verbatim in TrailScreen and CompassScreen, and
drawCircle lived only in CompassScreen. Lift both into a gfx:: namespace
header so the map and compass share one copy of each 1-px primitive.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
UITask::currentLocation() becomes the one place that reads the
LocationProvider fix. TrailScreen::ownPos, CompassScreen::gpsValid and
NearbyScreen::refresh now delegate to it instead of each duplicating the
getLocationProvider/isValid dance (and the ENV_INCLUDE_GPS guard).
pushCogFix now restarts the course-over-ground ring when the gap since the
previous fix exceeds 15 s: after losing GPS for a while, a window spanning
the stale old fixes would compute a bogus "teleport" heading. The
last-good heading is kept for display continuity.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Compass: switch to a heads-up card. The direction of travel is now the
fixed "up" index at the top and the compass card rotates underneath it —
a North needle plus N/E/S/W letters placed at screen angle (bearing - cog),
so North spins as you turn rather than the arrow pointing at your course.
Trail waypoints: the nav list now always starts with a synthetic
"Trail start" row whenever a trail exists, so you can navigate back to
where you began without having marked it. The "Waypoints" action appears
when there are saved waypoints OR a trail to backtrack to. Rename/Delete
apply only to saved waypoints; the start row is navigate-only. List/nav
indexing goes through rowTarget()/wpIndex() helpers.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tools › Compass shows the device's course over ground (from the GPS COG
ring — no magnetometer) as a rotating arrow in a ring with a north tick,
plus a large degrees + cardinal readout. "No GPS fix" without a fix;
"move to set heading" when stationary (course undefined). Reuses
UITask::currentCourse, so it works without recording a trail.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
