Squash merge of feat/location-beacon-alerts-autopause (v1.21).
Features:
- Live Location Sharing — broadcast position as movement-gated [LOC]
messages to a channel or contact; live shares show as map pins with
distance/bearing in Nearby Nodes and a status-bar indicator. [LOC] is
parsed in DMs, channel messages and room messages; DM shares name the
sender.
- Locator (geofence) — arm a geofence around a saved waypoint or a person
(live [LOC] or last-known position), alert on arrive/leave or near/far,
with an optional homing beeper (gated to arrive/both modes). Arm from
Tools > Locator, Nearby Nodes, or Waypoints; target picker lists
favourites first, clearable via a "None" entry. Active target is drawn
as a flag on the map.
- One active target shared across Locator / Navigate / Map via a single
resolver (resolvePersonPos / activeTargetPos) that prefers a live
[LOC] share over the last-advertised GPS fix.
- Follow live contacts — Navigate to a live-sharing contact follows them
as they move and adds an ETA line; quick-share your own position from
the Map.
- Map & status-bar upgrades — home mini-map gets a north marker, scale
tick, and a connected trail line (was disconnected dots); status line
shows tracked-node count, an arrow + distance to the active Locator/Nav
target (falling back to the nearest live-tracked contact); GPS fix icon
in the top status bar, shown only on GPS boards with GPS enabled.
- Trail auto-pause — recording freezes on stops (banking elapsed time,
breaking the map line across the idle gap) and resumes on movement
without ending the session.
- Streaming trail simplification — GPS points are simplified in-stream
via a fixed-corridor (Reumann-Witkam) pass tuned for fidelity: straight
runs collapse to their endpoints, curves stay bounded to the Min-dist
tolerance, so the 512-point buffer covers a far longer route than a
flat point budget would suggest.
- Collapsible Tools (Location / Comms / System sections, fold-in-place
like Settings) and page-indicator icons on the home carousel.
- Waypoint coordinate editor — add a waypoint by scroll-editing lat/lon
digit by digit.
Fixes:
- Critical: low-heap hang and contact loss on RAM-tight builds. Halved
message-history scrollback rings (recovering ~14 KB free heap) and
made contacts/channels/prefs persistence atomic (temp file + rename),
so an interrupted save can no longer corrupt or wipe the store.
- Serial.write() bounded so a stalled USB host can't hang the device.
- Nearby Nodes: live [LOC] senders respect the type filter, sort by
shared position, and the list refreshes so live shares bubble up.
- Map: live contacts are labelled before waypoints.
- GPS status icon hidden when GPS is off in Settings.
- Splash screen no longer truncates a pre-release tag's own dash (e.g.
v1.21-rc1) when stripping the build's commit-hash suffix.
- Null-guarded the Locator target picker; clamped loc-share channel
index on load.
Under the hood:
- -Os size optimisation on the e-ink and GAT562 30S solo envs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
AUTO_OFF_MILLIS is a power-save feature aimed at battery use. When the
board reports isExternalPowered() == true (USB or other DC source),
blanking the screen serves no purpose — there's nothing to conserve.
But OLEDs are vulnerable to burn-in with static content, so this
behaviour is gated behind a new build flag KEEP_DISPLAY_ON_USB. Default
is unchanged from upstream — the display blanks after AUTO_OFF_MILLIS
on USB or battery. Variants that ship with an LCD instead of an OLED
(e.g. heltec_t096) can opt in by adding -D KEEP_DISPLAY_ON_USB to
their env, gaining always-on-while-powered without exposing OLED users
to burn-in risk.
When the flag is enabled, the implementation refreshes _auto_off every
loop iteration while externally powered, so the timer naturally counts
a fresh AUTO_OFF_MILLIS window from the moment power is removed —
no instantaneous-blank-on-unplug.
Applied to all three companion_radio UI flavours (ui-new, ui-tiny,
ui-orig). Boards without an isExternalPowered() override use the
base-class default in MeshCore.h (returns false), so battery-powered
behaviour is unchanged everywhere.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The current logic only works for active high LEDs. Some boards need
an active low level control and therefore they set LED_STATE_ON to 0.
Take this into account and use the correct LED pattern for both cases.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
This should significantly reduce power consumption in hibernation.
Fixes: #1014
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Signed-off-by: Frieder Schrempf <frieder@fris.de> # generalize for all radios and UIs
