Adds SECTION_CONTACTS with two items under Settings:
- DM: "fav" (default) / "all" — controlled by dm_show_all in NodePrefs
- Rooms: "all" (default) / "fav" — controlled by room_fav_only in NodePrefs
Both fields default to 0, preserving current behaviour on firmware upgrade.
buildContactList() reads the prefs to filter accordingly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds ADV_TYPE_ROOM contacts as a selectable category in the MODE_SELECT
screen. Reuses the existing CONTACT_PICK → MSG_PICK → send flow via a
_room_mode flag; sendMessage() works identically for room servers.
All room server contacts are listed (no favourites filter).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Sums getMsgCount() (DM unreads) and getTotalChannelUnread() (sum of
_ch_unread[] across all channels) and displays "N unread" under the
"Messages" heading when non-zero.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The contact picker now lists only contacts of type ADV_TYPE_CHAT
that have the favourite flag set. Shows "No favourites" when none
are starred. Asterisk prefix removed since all entries are favourites.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Long-pressing ENTER on a channel in the channel picker opens a
2-item context menu: "Mark all read" and "Notif: default/OFF/ON".
Muted channels still increment the unread counter silently; force-ON
overrides global buzzer mute. Settings persist to flash via NodePrefs
(ch_notif_override / ch_notif_muted bitmasks).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Fix placeholder picker colors: dark box + white border, light fill
for selected item (consistent with rest of UI)
- Fix placeholders not expanded when sending from keyboard (expandMsg
was only called in MSG_PICK path, not KEYBOARD path)
- Fix sent messages incrementing unread counter: set _phase=CHANNEL_HIST
before addChannelMsg so viewing=true
- Fix keyboard column inverse mapping on UP from special row
- Remove old_row dead code from QuickMsgScreen keyboard handler
- Alert banner shown only on home screen, suppressed in settings/messages
- Bump FIRMWARE_VERSION to v1.15.1
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Settings → Messages section: 10 user-editable message slots (M1–M10)
with on-screen keyboard editor; slot M1 defaults to "OK" on first boot
- Keyboard: add Caps Lock [^] button — stays highlighted when active,
all letters display and insert as uppercase until toggled off
- Keyboard: add [{}] placeholder picker overlay — inserts {loc} or {time}
into the message at cursor position; available in both compose and
settings slot editor
- Max message length raised to 139 chars to match the companion app;
ChHistEntry text buffer extended to 140 chars
- NodePrefs: custom_msgs slot size extended to 140 chars per slot
- KB constants (KB_MAX_LEN, KB_CHARS, etc.) moved before SettingsScreen
so both SettingsScreen and QuickMsgScreen can reference them
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- QuickMsg → Message screen: channel history, on-screen keyboard, custom message first
- Channel history: RAM ring buffer (32 entries, 80 chars), fullscreen view with word-wrap scroll
- After channel send: stay in history, own message shown as "Me: ..."
- MsgPreview: one message per screen with up/down nav, ENTER opens fullscreen scroll
- Monochromatic display: all color usage corrected to DARK/LIGHT only
- Top bar: battery icon, BT muted indicator, splash "Plus for Wio"
- KB_MAX_LEN: 64 → 100 chars; channel text buffer: 52 → 80 chars
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add FIRMWARE_PLUS_BUILD compile flag to both companion sections in
platformio.ini. When set, SplashScreen shows "+ unofficial build" in
yellow below the build date. Avoids runtime string parsing — the
existing version stripping logic (cuts at first dash) is unchanged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Track dirty state per-field in handleInput. savePrefs() on exit only
if at least one value was actually modified. Buzzer is excluded — it
already saves immediately via toggleBuzzer(). markClean() resets the
flag each time the settings screen is opened.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
lowBatIndex(), autoOffIndex(), gpsIntervalIndex() each called
getNodePrefs() independently without null check, while renderItem()
had its own guarded copy. Added null checks consistent with the rest
of the class. Also initialize _node_prefs to NULL in UITask constructor.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace linear voltage-to-percent formula with a LiPo discharge curve
lookup table and linear interpolation. The curve is then rescaled so
that low_batt_mv (configurable shutdown threshold) maps to 0% and
4200mV maps to 100%, preserving the non-linear shape regardless of
the chosen threshold.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Filter contact list to ADV_TYPE_CHAT only — excludes repeaters, rooms,
and sensors which cannot receive direct chat messages.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Favourite contacts (flags & 0x01 set by companion app) appear at the
top of the contact picker, marked with '*'. Non-favourites appear
below. The favourite bit is already synced by the existing protocol
via CMD_ADD_UPDATE_CONTACT — no protocol changes needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Watchdog: nRF52840 hardware WDT with 30s timeout, runs during sleep.
Resets device if main loop stalls for >30s. Pets in every loop()
iteration so normal operation never triggers it.
QuickMsgScreen: new UI screen accessible from home screen pages.
Two-phase UI: contact picker (shows all contacts with hop count),
then predefined message picker (location, I'm OK, need help, on my
way, ETA 10min, ETA 30min). Location message uses live GPS fix if
available. Sends via the_mesh.sendMessage() and shows sent/error alert.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Save last known unix timestamp to /rtc_save on shutdown and restore it
on startup, so the clock shows correct time immediately after restart
without waiting for GPS fix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- CPU sleep: board.sleep(0) in main loop puts NRF52 into WFE/sd_app_evt_wait
between iterations; wakes on any interrupt (radio, BLE, timer). Largest
power saving of the three changes.
- VBAT_ENABLE gating: voltage divider now powered only during ADC read
(HIGH for 10ms, then LOW). Previously stayed HIGH continuously.
Fixed in both variant.cpp (init) and WioTrackerL1Board::getBattMilliVolts().
- LED off with display: PIN_LED is cleared when auto-off triggers and
restored (handed back to userLedHandler) when display wakes. Avoids
idle LED current draw during screen-off periods.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The companion_radio example was not restoring the GPS enabled/disabled
preference from flash after reboot. The preference was being saved
correctly when toggled via the mobile app, but on boot,
sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false
and nothing subsequently restored the persisted state.
Added applyGpsPrefs() (matching the pattern in simple_repeater,
simple_sensor, and simple_room_server) and call it from main.cpp
after sensors.begin() to ensure the GPS hardware is initialized
before the saved preference is applied.
- Change > to >= so stored value 1 means direct/0-hop only (liamcottle)
- Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl)
- Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Filter auto-add of new contacts by hop count (issues #1533, #1546).
Setting is configurable from the companion app via extended
CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.
This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
JakubandClaude Sonnet 4.6
Scott Powell
Scott Powell
Alejandro Ramirez
liamcottle
Rastislav Vysoky
Janez T
João BrázioandGitHub
Wouter Bijen
Daniel Novak