Settings > Sound > Quiet hours (L2: its own group; L1: Quiet hrs / from /
until): from quiet_from to quiet_to (local hours, wrapping past midnight)
the buzzer is muted and a message doesn't wake the screen; the clock alarm
still rings. A manual mute or unmute inside the window stands until the
window ends. Off with the clock unset.
NodePrefs gains quiet_hours / quiet_from / quiet_to (appended to the file,
sentinel 0xC0DE0030; sizeof 2832 on nRF52 and ESP32), off by default,
22:00-07:00. hourInWindow() / localHour() are shared with the bot's quiet
hours. soundctl::tick() replaces autoTick() (Auto and quiet hours).
Also fixes the L2 side-button mute: it went by the mode, not by whether
the buzzer was muted, so with Auto + an app connected (and now quiet hours)
the first press muted instead of unmuting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Map tools: TRAIL, LIVE SHARE and ARRIVAL ALERT each with their own options
page (that section of Map options; back returns to Map tools), the arrival
alert switch where its state is shown, OFFLINE MAPS (Map areas, Live
tiles; the separate Download an area is gone -- a running or unfinished
download shows at the top of Map areas) and LAYERS.
Map areas: picking one frames it on the map above a small sheet (no Show
button, the map above isn't dimmed); closing the sheet, however it's
closed, puts the map back where it was and drops the outline -- it used
to stay on the map. New popup kind POP_BOTTOM.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The UI runs on Arduino's loop task, whose stock 8 KB stack had 340 B left
at its deepest point; a screenshot's file write went past it and reset the
device. The loop stack is now 16 KB (measured peak ~7.8 KB) and the
screenshot's line buffer is static. Diagnostics names the row
"UI stack free (lowest)".
With a cable in at boot, the USB popup waited for nothing and showed over
the splash; it now comes once the splash has faded.
Adds docs/development/plan-next.md, the plan up to the merge into dev.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hold an app on Home (or Settings > Home apps) to arrange them: every app
is shown, hidden ones dimmed with a +; a drag drops the app into the slot
under the finger, held at a screen edge it goes to that page; a tap hides
or shows it. Settings stays shown. The order is kept in NVS (letters per
app, lower case = hidden), saved on Done or on leaving Home.
Roadmap: note the speaker-knock experiment (DAC ramp didn't help).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- USB through TinyUSB (ARDUINO_USB_MODE=0) instead of USB-Serial/JTAG: the
serial port stays, and plugged into a computer (enumerated, the bus not
suspended -- on battery an unplug only shows as a suspend) the device asks
"Charge only / USB drive". As a drive the firmware lets go of the card and
the computer gets its sectors; ejected or unplugged, the device restarts.
- Incoming messages: a banner slides down from under the status bar (icon,
sender or channel, two lines of the text from history); a tap opens the
conversation (not while locked), a swipe up dismisses it, not shown for
the conversation already open. Toasts moved up there too, under the banner
when both are up; the ones only echoing a switch or a choice are gone.
- Storage > Format card: a popup saying what goes, then Format tapped twice;
one FAT32 volume over the whole card (readable or not), then a restart.
- A deliberate restart shows a full "Restarting..." screen with the reason
instead of the screen just freezing.
- The screenshot flash is a thin frame round the edges: a full-screen fade
redrew all 320x240 each step and tore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Settings > WiFi keeps up to 8 networks (NVS "s0".."s7" / "p0".."p7"; the
single one older builds saved moves over). A tap loads one to change its
password, Forget asks with a second tap, a scan marks the known ones.
- Map downloads, live tiles and updates join the strongest saved network in
range (a short scan first when more than one is saved), else the newest
one -- which also covers a hidden network.
- Save joins the network once: "password OK", turned away (forgotten again,
the form keeps it to fix) or not in range (kept, checked later).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Side button held + top button saves the screen, popups and toasts included,
to /sdcard/screenshots/scr_NNNN.bmp (24-bit BMP). The flush callbacks copy
one forced full re-render into a PSRAM buffer. A white flash and a toast
confirm it. The side button's mute now fires on release, so holding it a
little long before the top button doesn't also mute. In the sim, the page's
Screenshot button downloads the file.
- The lock screen goes dark after 30 s even with auto-off at Never (a boot
PIN, a pocket wake-up, a message), and sooner if auto-off is shorter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every toggle / stepper wrote the prefs file straight away (0.1-0.6 s on the
ESP32's SPIFFS), which stuttered the UI and wore the flash. prefsSave() now
only marks them dirty; they're written once when the screen is left, when the
display goes off, or after 60 s at the latest -- the L1's approach. Shutdown
and the pre-restart OTA save still write immediately.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It was a muted prefix on the date line, easy to miss. clockFace() -- the
digits and a small AM / PM on their baseline -- is shared by Home and both
lock screens (the PIN card showed no AM / PM at all). The date loses the
prefix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LVGL 9.2.2 measures a SIZE_CONTENT box from its children as scrolled, so an
elastic pull past the end of a capped popup list shrank it by the overshoot,
again on every pull. lvgl_patches.py fixes calc_content_height in the
downloaded library (a build middleware for PlatformIO, called directly by the
sim's build_wasm.sh).
The five popups that each built the same panel now share popupOpen() (fit to
content / full height / under the status bar).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One .vpk file per region in /vmap (header, sorted index of tiles and
points, then the data), read in place with the index in PSRAM; loose
{dz}/{x}/{y}.vt/.vp files still work. osm_vector.py writes packs
(--pack/--name), reads OSM PBF extracts for a box (--pbf/--bbox, via
pyosmium) and picks label languages (--lang). Map tools > Vector regions
lists the packs on the card: show one on the map, delete it. No
on-device download: packs are made with the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tools/maps/osm_vector.py turns Overpass JSON into VT2 tiles (data zooms
10/12/14, per-feature bbox, simplified); VectorTileProvider draws them
into 256 px tiles (scanline polygons, thick lines with round joins) with
a small PSRAM cache of data files. Behind Map tools > Vector map (test),
raster where there is no vector data.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Download an area: a frame with four corner handles on the map (kept in
world coordinates, the map pans / zooms under it); a bar gives its size,
zoom range, tile count and size, the trails switch and Get; areas on the
card are outlined
- Map tools > Map areas: the downloaded areas (map/AreaStore.h,
/sdcard/maps/areas.txt) -- show (framed, outlined), rename, fill gaps,
refresh (force re-download), trails on / off, delete (in steps, keeping
tiles another area covers)
- TileDownloader: force and per-job trails options
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Messages: New message moves to the header; Channels / Direct / Rooms fold
on a tap of their title (kept in NVS), a folded one shows its unread count
- Storage: the card's bar is split into one coloured segment per category
(plus the uncounted rest), each category row keyed with its colour
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Unread badge on Home tiles sits in the top-right corner, clear of the icon
- Minimap with no GPS fix: the saved position (hollow dot), else where the
map was left, else the default view; a hint when no tiles cover the area
- Screen header 38 px, so the back and header buttons get a margin
- Bluetooth / WiFi connected shown in the accent colour; charging bolt green
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Home pages: favourites, the clock (tap for Clock) with three telemetry
fields picked by holding one (shared dashboard_fields), a minimap that
frames you, live shares and the target (tap for the Navigation map), and
the apps in 3x2 pages. The side button now returns to the clock page with
a cross-fade instead of going back. Home moves to HomeScreen.h.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
group() / settingRow / listRow / actionRow / choiceRow / groupNote: one card
per section, hairlines between rows, hints that wrap. Dropdowns replaced by
a centred picker list. Settings regrouped (Device, Connections, Map & data,
System); Display & power split into Display, Power and Time on L2 only
(the shared schema is unchanged), Keyboard and About get their own pages.
Radio and Repeater share one LoRa parameter block.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Info cards drop the default 8 px row gap so text sits centred between
hairlines. The alarm Repeat list is compacted to fit above the dropdown.
creditText() keeps "(c) Name" and licence names like CC-BY-SA together
in About and the map credits toast.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shared infoCard/infoRow/infoNote helpers: muted label left, value right,
hairlines between rows, empty rows hidden. Diagnostics grouped into
sections with a received/sent packet table; GPS gets a position card and
constellation pills; About, OTA, Storage and map popups use the same
cards. Text no longer breaks after '.', clock alarm hint unclipped.
Sim-only sim_open() hook for jumping to a screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Power: the UI loop sleeps until something is due (never with packets
queued); screen off puts the CPU at 80 MHz, the GT911 to sleep (unless a
tap wakes the screen) and the LP5814 in standby. GPS off now cuts the
L76K's rail and UART on the L2 (L2GpsProvider). The battery divider is
powered only for a reading (measured: settles at once); readings within
2 s are reused. The SD mount is retried at most every 5 s.
Fixes: WiFi left on after leaving a scan, live tiles' WiFi kept with the
screen off on the map, an ADC read every second for the status bar, touch
polled on every pass while dark, a scan cutting an update's WiFi, relay
count not refreshing in a channel thread, raw @[nick] in room previews.
Labels skip unchanged text (no redraw).
Helpers: scrollList, dimOverlay, settingRow, flexBox, nvs::get/put,
trailFilePath (a second save in the same minute no longer overwrites),
unreadTotal. Dead code removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Mentions: "@[nick]" in message text becomes "@nick" in the accent colour
(a span group); a mention of us is underlined and its bubble outlined.
Chat previews and the message popup's quote show "@nick" as well.
Emoji: every single-codepoint Twemoji and every flag, 16 px RGB565A8 in
flash, as the fallback font of each text size (fonts/ui_emoji.c, data
generated by fonts/emoji.py). Joiners, selectors and skin tones take no
space; a regional-indicator pair is swapped for the flag's private
codepoint before text reaches a label. Twemoji credit in Settings > About.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shown while WiFi is switched on (Settings > WiFi), bright when connected
(live tiles, map download, update), dim otherwise. The switch is read
from NVS once and cached. The status icon signature buffer grew so
changes to the last icons aren't missed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The six slots with unread badges on a card of their own (swiped to,
no clock), redrawn when messages arrive; the Favourites tile and screen
are gone, showFavourites() opens the card. The page dots sit at the
bottom on every card.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings > Display & power > WAKE > Tap to wake (NVS, on by default):
off, only the top WAKE button turns the screen on. The side USER button
doesn't wake the screen any more (a press in a pocket); held, it still
mutes / unmutes with the screen off. Roadmap: buttons corrected (WAKE is
the top one), USER to open the main menu page later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Status bar icons come from ui_icons_14: FontAwesome refitted to one
size by fonts/status_icons.py (falls back to ui_font_12 for the
battery level text), the charging bolt in a tight cell.
- Own channel posts show the repeater count as a small badge, as L1,
instead of a check and a number.
- Message path popup: a stronger connector, roles on the right
(sender / hop N / you), our post's repeaters fanned out under us,
long paths scroll.
- Scrollbars everywhere are thin and hug the edge, clear of the content.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tiles fetched while browsing online go to /sdcard/maps-live with an
index of arrival order; past the limit (Settings > Storage, 16 MB-1 GB,
default 64 MB) the oldest are deleted a few per loop. Storage shows
their count and size and can delete them all. Downloaded maps are never
touched. Roadmap: live tiles done, second batch of user items added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The AW35615 USB-C controller (FUSB302-style registers, ID 0x91) only
reports VBUSOK with its measure block on; POWER resets to bandgap only,
so isExternalPowered() was always false. Board init turns it on
- Status bar shows a charge bolt on the cable, Diagnostics > Live has a
Power row, the GPS screen notes that charging disturbs GPS, and the
low-battery warning is skipped on USB as intended
- Roadmap: USB detection closed; GPS indoors still worse than the L1
even on battery, left open for later
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Home > GPS and Settings > System > GPS details: satellites on a sky plot
(filled = used in the fix, colour = C/N0), a bar per satellite with its
dB-Hz, fix state with time to first fix, DOPs, position, altitude, speed,
UTC and per-constellation counts; a Turn on button while GPS is off
- helpers/sensors/GpsSky.h parses GSV / GSA / GGA / RMC from any talker,
fed from MicroNMEALocationProvider behind -D GPS_SKYVIEW (L2 and the
sim only; L1 unchanged); the sim feeds it made-up NMEA
- Roadmap: GPS indoors diagnosed with it - on the USB cable the L76K
tracks satellites but never decodes navigation data; on battery it
gets UTC within seconds and a fix
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Message history archived per conversation on the SD card (HIST_ARCHIVE):
restored on boot, Older/Newer paging in threads, kept count selectable
- Settings > System > Storage: card and flash usage, breakdown by maps,
messages, trails and other, kept-per-chat setting, delete history;
reads the mounted volume and warns when the FAT partition is much
smaller than the card
- Saved trails on the card: every Save is a new file, Load opens a list
with load (framed on the map), GPX export and delete
- Diagnostics: GPS data rows, last start reason, last crash summary
- Messages restored before the clock is set show their date instead of 0s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Unlocking fades the lock screen out while the screen underneath drifts
into place; the slider unlocks on letting go at the end and springs back
when let go earlier
- Channel names no longer get a "# " prefix (thread title, channel popup,
live share targets) -- "#" marks a hashtag channel; favourite contacts in
the live share list are starred instead
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Anim.h: screens emerge from the middle (background cover fades, content
drifts 6 px), Home pages slide, popups and toasts rise and fade in
- Theme.h: accent rules (fill = primary action, dim fill = selected, text =
names/counts/modes), theme layer over the default theme, radius tokens,
accent colour picker (Settings > Display & power > LOOK, NVS mc_ui)
- Splash with the Solo and upstream versions
- Status icons in equal cells, L1-style relay marks, path window with a hop
diagram, tile download popup fits the screen (WiFi only in Settings)
- Perf: uncompressed fonts, two 120-line PSRAM buffers (~48 -> ~33 ms per
transition frame); UI_PERF_TEST harness
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Screen PIN (Settings > Display & power > Security): 4-8 digits in NVS,
keypad on the lock card after every wake and on boot, 5 misses -> 30 s pause
- Live map tiles: missing tiles at the current zoom are fetched over the saved
WiFi, written to the card and drawn; WiFi drops 30 s after leaving the map;
"Live tiles" switch in Map tools
- Firmware update (Settings > System): checks the fork's latest release,
streams the -ota.bin into the spare app slot over TLS verified with the
Arduino 3.x CA bundle, checks image magic/chip id, restarts
- Release workflow publishes *_solo_lvgl envs (merged image + -ota.bin)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Map tools hold trail, live share and arrival alert, with their options
(schema page "Map options") behind one button; back returns to the map
- Nearby gets an advert button: send now (nearby / everyone) + auto-advert
- Home page 3: Repeater, Admin (list of repeaters and room servers),
Diagnostics
- Settings: display, sound, radio (Bluetooth, WiFi), system, keyboard,
contacts & messages; units moved to Display & power
- Status bar: Bluetooth, GPS, alarm, mute, then auto-advert, trail, live
share, repeater, arrival alert in the accent colour
- Fonts: key and route glyphs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- New env Wio_Tracker_L2_companion_solo_lvgl_v3 on pioarduino 55.03.312-1;
the 2.0.17 env stays until the new one passes the hardware checklist
- SerialBLEInterface: NimBLE variant (PIN pairing through encrypted,
authenticated characteristic properties; setAccessPermissions is a no-op)
- buzzer: i2s_std driver on IDF 5 (legacy driver kept for 2.0.17)
- ESPNOWRadio: IDF 5 callback signatures
- ui-lvgl: psramBuf() for trail drawing, tile cache, map marks, list rows,
keyboard maps and message metadata; internal heap back to 2.0.17 level
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- genericBuzzer I2S path (BUZZER_I2S): an audio task synthesises the notes
with eased edges and keeps the DMA queue fed with silence between sounds;
ES8311 setup; amp powered through the board only around sounds
- ui-core/SoundControl.h (mode, volume, built-in sounds, melody model),
SoundNotifier moved to the Core, chanctl::melody, schema Sound page
- L2: notifications, alarm / timer ring, locator sounds, Settings > Sound,
melody editor with the playing note lit, per-chat sound, mute icon
- noteIndex() on every buzzer backend; scrolling popups past screen height
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BotConfig (tabs, rows, the NodePrefs field behind each, reply placeholders)
moves into ui-core; ui-new's Tools > Bot renders it. L2: Home > Bot with
switches, list pickers, text popups with placeholder buttons, quiet hours.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AdminSession (login with saved password, CLI round trips, timeouts, field
table, typed values) moves into ui-core; UiCore offers login answers and
CLI replies to it first. ui-new's Tools > Admin becomes a view over it.
L2: node detail > Admin with tabs and per-field popups.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ChannelControl (add Public/Hashtag/Private, rename, delete, notif/fav/scope)
and Favourites slots move into ui-core; ui-new uses them. Contact / channel
pref cleanup moves from ui-new's UITask into UiCore so it runs on every
frontend (L2 had none). L2: channel options popup (hold a row or the gear
in a channel) and the Add / Edit channel form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The map's download button fetches the visible area (overview levels up to
a chosen zoom) into /sdcard/maps from OpenTopoMap or maps/source.txt,
skipping tiles already on the card and rejecting placeholder answers.
Settings > WiFi stores the network in NVS (with scan); WiFi is on only
while a download runs. HTTP runs on a worker task on core 0; the popup
shows link, internal heap and the last TLS/HTTP error.
Internal RAM was the blocker (~13 KB free with WiFi + Bluedroid): the L2
LVGL env now allocates the_mesh in PSRAM (MESH_IN_PSRAM, static RAM
210 -> 87 KB) and mbedTLS allocates from PSRAM. Confirmed on hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Map screen (Home > Map): Web-Mercator tiles from /maps/{z}/{x}/{y}.png on
the card (Meshtastic MUI layout; per-column TPK1 .pak also read), drag to
pan, +/- zoom, re-centre/follow GPS, Nearby nodes with a position as
markers opening node detail. Tiles decode one per loop pass into a
12-slot RGB565 cache in PSRAM. map/TileProvider.h is the swap point for a
later vector renderer: the screen only calls renderTile(). The tile set's
credit line comes from maps/attribution.txt.
L2 mounts the card over SDMMC 1-bit (CLK 2, CMD 3, D0 1). LVGL's lodepng
is enabled; note its LVGL patch returns an lv_draw_buf_t*, not pixels.
LVGL pool 2 MB for PNG decoding. Fonts gain map / users icons.
tools/maps/fetch_tiles.py prepares a card for an area (presets for
Poland), requires an explicit tile URL (tile.openstreetmap.org blocks
offline use) and stops on placeholder images. The LVGL sim preloads
web/maps into the L2's /sdcard and puts its GPS on Kraków.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JakubandClaude Opus 5.5