Seeed Wio Tracker L2 (ESP32-S3R8 16MB/8MB PSRAM, SX1262, NV3031B 320x240
QSPI LCD + GT911 touch + LP5814 backlight, TCA9535 expander gating every
rail, ADS1115 battery ADC, AW35615 USB-C, L76K GNSS).
Board layer ported from meshcore-dev/MeshCore PR #3381 (Hacuchino-hash),
kept at the same paths for an easy upstream merge. Differences:
- display: dropped the UIColor theme (not adopted in this fork)
- GpsTap diagnostics wrapper omitted; GNSS reads Serial1 directly
- nv3031b ODR fix dropped: LovyanGFX >= 1.2.30 (now pinned) defines
Panel_NV3031B::init_cmds itself -- the fix became a duplicate symbol
- MESH_DEBUG_PRINTLN with a non-literal format fixed (broke MESH_DEBUG builds)
- upload_speed 115200: baud is virtual on native USB; skips the switch
solo/wio-tracker-l2 adds Wio_Tracker_L2_companion_solo_bringup: ui-new
zoomed 2x, BOOT button only, no touch -- a hardware smoke test, not a
release target (deliberately not *_solo_dual, so CI doesn't publish it).
The real UI for this board will be a new LVGL frontend.
Verified on hardware: boot, display, radio, GPS, battery, BLE app link.
First boot takes tens of seconds while SPIFFS formats its 3.4 MB partition.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
release-notes.md's v1.25 section already documents "Updated upstream
base to companion-v1.17.1", and that merge (68527e7b) is confirmed in
main's history -- but every MESHCORE_VERSION string, including
UITask.cpp's fallback default for boards that don't set it explicitly
(Heltec v3/v4, ThinkNode, Mesh Pocket, T-Echo), was still hardcoded to
the pre-bump "1.17". Bumped every occurrence to "1.17.1" to match what
actually shipped.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Merged after the fact, so it followed the old convention (solo env inside
variants/promicro/platformio.ini alongside the shared board configs). Moved
to match every other board post-restructuring -- extends still points at
Promicro, defined in variants/promicro/platformio.ini.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Solo's `_solo_dual` env for each board lived inside variants/<board>/, mixed
in with the shared upstream board configs (repeater, room server, plain
companion) that every MeshCore fork carries. Split them out into their own
top-level solo/<board>/ folder -- each still `extends` the board base defined
in its original variants/<board>/platformio.ini, just no longer interleaved
with it file-wise.
- platformio.ini: extra_configs picks up solo/*/platformio.ini alongside
variants/*/platformio.ini.
- build-solo-firmwares.yml: env-discovery grep now scans solo/ instead of
variants/ (the release matrix is unchanged -- same 8 envs, same names).
- pr-build-check.yml: solo/** added to the trigger paths.
- GAT562 30S Mesh Kit: dropped the separate solo_ble env -- solo_dual is a
strict superset (BLE still works, plus USB), and every other board only
ever had one solo build to begin with.
- GAT562 Mesh Watch13: renamed solo_ble -> solo_dual (added DUAL_SERIAL=1) to
match. No comment anywhere recorded whether this board's USB data lines
are actually broken out to a connector -- DUAL_SERIAL compiles and works
over BLE regardless, so worst case the USB half goes unused.
- Removed a dead AUTO_SHUTDOWN_MILLIVOLTS from the three solo envs that set
it (Heltec V3/V4, T-Echo Lite+KeyShield): that macro is only ever read in
the old ui-tiny UITask, never ui-new, which every solo build (these
included) uses -- it did nothing on any of them. Left alone everywhere
else it's set (non-solo companion envs elsewhere use ui-tiny/ui-orig, or
the flag is legitimately read); out of scope here.
- Added docs/solo_features/build_flags.md: every optional -D flag a solo
build understands (GPIO, CardKB/joystick, Hall-sensor cover lock, buzzer/
vibration, GPS switch, display/battery tuning), verified against the code
rather than the existing per-board comments, with what's already baked
into every solo build kept separate from what's opt-in.
- README: doc index + Building from source section link to the new page;
path references to the moved solo files updated to solo/<board>/.
All 8 solo_dual envs rebuilt clean after the move; native test suite (40
cases) unaffected.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
JakubandClaude Opus 5.5