- GxEPDDisplay now uses the same single misc-fixed 6x9 font as the OLED
driver (Lemon retired there too), with baseline math updated for the
new ascent.
- Clock Tools' Alarm screen: Repeat and Armed now respond to LEFT/RIGHT
like every other multi-value/toggle field in Settings, not Enter-only;
Hour/Minute merged into one Time row edited with a hand-rolled HH:MM
digit cursor (like the Timer's), replacing the two-row DigitEditor
popups; Repeat's "Off" label now matches the codebase-wide ON/OFF
casing.
- Top status bar: battery icon now shares the same box height as the
other status icons (Bluetooth/mute/etc.) instead of standing 2px
taller, and its charge nub is properly vertically centred instead of
drifting off-centre at non-multiple-of-4 box heights.
- Small settings-gear icon glyph tweak; wio-tracker-l1 screenshot build
variant now enables DUAL_SERIAL.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replace the Lemon/default font-switch with a single misc-fixed 6x9 font
(full Latin/Greek/Cyrillic coverage), generated via a new tools/bdf2gfx.py
BDF-to-GFX converter. Removes the keyboard's per-render font-switch
workarounds now that one font fits its cell cleanly.
DiagnosticsScreen becomes a circular tab carousel (Live / System / Font),
adding a firmware+device+radio info tab and a per-alphabet rendering test
card covering every keyboard language.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
After soaking for a bit on the adverts without issue on multiple nodes,
I added more hardware crypto.
Supported nodes is unchanged in this PR addition, but if others can verify,
they can easily be added.
Some info on the CC310: https://docs.nordicsemi.com/r/bundle/ps_nrf9151/page/cryptocell.html
**Added:**
- AES-128 packet encryption/decryption now use hardware crypto
- HMAC-SHA-256 authentication now uses hardware crypto
- ACK hash computation and channel ID derivation now use hardware crypto
- RNG (random number generator) now uses hardware crypto rather than
radio noise + weak software RNG (which can have issues if there's
no surrounding radio noise.) NIST SP 800-90B certified.
- Runs hardware self-tests on startup
- Runs continuous health tests during operation
- Uses thermal noise/shot noise for randomness
**Unchanged:**
- calcSharedSecret remains software - it would be a split hw/sw solution
and added complexity for likely not a lot of gains. This only happens
when establishing a new contact, so not too frequent to be worth it.
- ed25519_create_keypair remains software. This is only called when a
node is first initialized. It does use the hardware RNG change, however,
so better randomization.
Tested on (so far):
- Heltec t096
Build test on:
- Heltec t096 companion ble
- t1000e companion ble
- RAK 4631 repeater
- RAK 3401 companion BLE
- Heltec v3 companion wifi
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Let me know when and how to demonstrate.
A device administering itself via the Admin tool read as awkward, so the
local mode is gone and its options relocated to Settings.
- AdminScreen is remote-only: drop the CHOOSER phase, _local_mode, the
LocalField/LocalKind model and activateLocalField/commitLocalField.
Phases collapse to LOGIN/COMMAND/REPLY, entered only via startFor().
- Tools > Admin opens straight to the Nodes picker (ACT_ADMIN ->
pickAdminTarget()). Backing out of a command screen returns to that
picker; the picker's Cancel returns to Tools. gotoAdminScreen() removed.
- Settings > System gains Name (keyboard-edited node_name) and Reboot
(action row, placed last so it isn't the default cursor). Radio + TX
power were already in Settings; Send advert is the home ADVERT page.
Docs: tools_screen.md Admin section rewritten remote-only; settings_screen.md
System table gains Name + Reboot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Without ROOM_PASSWORD the guest password defaults to empty, and a client
sending a blank password is granted read+write access (can post). Every
other board's room_server env sets ROOM_PASSWORD; the ThinkNode M6 and M1
were the only two shipping an open room. Default them to "hello" to match
the rest of the tree; operators can still change it at runtime with
'set guest.password'.
next_check and next_gps_update stored a future millis() value in a signed
long and compared with a naive '>'. After the ~24.8-day millis() sign flip
the deadline sits above the wrapped millis(), so the block never runs again
and GPS->RTC time-sync (and the location cache refresh) stall permanently
until reboot. Switch to unsigned deadlines with the wrap-safe signed-
difference compare '(long)(millis() - deadline) > 0', matching the idiom in
Dispatcher::millisHasNowPassed.
Also: reorder the MicroNMEALocationProvider ctor init-list to declaration
order (silences -Wreorder) and drop the always-true 'if (_claims > 0)' guard
in claim() (claim() always runs after _claims++, so it is >= 1).
The M6 is the only board whose simple_repeater env ships with MESH_DEBUG=1
and GPS_NMEA_DEBUG=1 enabled. MESH_DEBUG=1 adds a 5-second boot delay
(examples/simple_repeater/main.cpp) plus verbose per-packet serial prints on
the hot RX/TX path; GPS_NMEA_DEBUG=1 echoes every GPS UART character to the
serial console (MicroNMEALocationProvider.h). Every sibling repeater env
(M1, M3, t1000-e, RAK, Heltec) ships these off, and the M6 room_server env
in this same file already has them commented. Comment them out to match.
External watchdog support was added (but never merged) for MeshTower V1. The update's V2's #defines to follow the conventions set there and piggy back off the support already written for V1.
Tools > Admin now opens on a This-device / Remote-node chooser. "This
device" is a login-free 2-tab carousel (System: Name/Radio/TX power/
Lat/Lon, Actions: Send advert/Reboot) mapped onto NodePrefs/sensors and
reusing Settings' own apply chains -- no CommonCLI port. "Remote node..."
opens Tools > Nodes in a pick-mode (borrow-another-screen's-list idiom),
and Nodes gains an "Admin" Hold-Enter action; both converge on the single
canonical UITask::openAdminFor() -> AdminScreen::startFor().
Also:
- KeyboardWidget: opt-in PlaceholderRefreshFn hook for contextual {}-key
CLI command-name completion (word-replacing); default behaviour and all
other keyboard uses unchanged.
- TabBar: ellipsize() re-measures the real "text..." candidate per step
(+ width clamp) so dots can't spill into a neighbour/reserved icon.
- ChannelsView: form rows truncate instead of wrapping.
- Reboot moved off the default-selected Actions row (fires with no confirm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Quency-D
Scott Powell
JakubandClaude Sonnet 5
Liam CottleandGitHub
Quency-DandGitHub
Jaroslav Škarvada
Nick Dunklee
Ryan Gregg
Huw DuddyandGitHub
Will Dillon
Jody Bentley
Alex Beal