Mirrors/MeshCore-Solo
1
0
Fork 0
mirror of https://github.com/MarekZegare4/MeshCore-Solo.git synced 2026-09-14 15:16:40 +00:00
Code Issues Packages Projects Releases Wiki Activity
4,003 Commits 4 Branches 36 Tags
300f5fab0b498fe6af596a31ea6a51ccc0bdda7c
Commit Graph
368 Commits
Author SHA1 Message Date
MarekZegare4 68527e7ba0 Merge upstream companion-v1.17.1 into power-saving 
Pulls in real fixes: scoped-reply routing, RX boosted-gain restored
correctly after AGC reset, T-Echo Lite/Card SPI pin corrections
(unused pins now map to NRFX_SPIM_PIN_NOT_USED via 0 instead of -1)
and TCXO voltage fix, Heltec T096/T1 and MeshPocket pin fixes,
T-beam Supreme S3 display fix, LR2021 preamble/IRQ timeout handling.

None of the touched variants overlap with our active Heltec V3/V4,
Cardputer ADV, GAT562, or WioTracker builds.

# Conflicts:
#	examples/companion_radio/MyMesh.cpp
#	examples/companion_radio/MyMesh.h
#	examples/companion_radio/NodePrefs.h
#	src/helpers/radiolib/CustomSX1262Wrapper.h
#	src/helpers/radiolib/RadioLibWrappers.cpp
#	src/helpers/ui/SH1106Display.cpp
#	variants/lilygo_techo_lite/platformio.ini
#	variants/lilygo_techo_lite/variant.h
 2026-08-14 15:58:23 +02:00
Scott Powell d929643524 * version 1.17.1 2026-08-14 22:19:19 +10:00
ripplebizandGitHub b09cb27a1f Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing 
Fix replies dropped when flood.max.unscoped is low
 2026-08-13 15:00:37 +10:00
ripplebizandGitHub a4ab7f0e59 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs 
Station G3: Expose, persist, and apply FEM gain preferences
 2026-08-12 16:11:23 +10:00
JakubandClaude Sonnet 5 7699d8ffad Merge upstream companion-v1.17.0 (CAD) into power-saving 
Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.

Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.

Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.

Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
 2026-08-11 17:25:35 +02:00
Scott Powell 93b2db63de * version 1.17.0 2026-08-09 15:14:46 +10:00
agessaman 23066573e5 fix(station-g3): expose FEM gain preferences 2026-08-06 15:29:14 -07:00
ripplebizandGitHub 84e3a67bd7 Merge pull request #3115 from oltaco/meshnology_w12 
Add support for Meshnology W12 and LR2021 Wrapper
 2026-08-05 15:04:00 +10:00
taco 9d4f93806d LR2021: auto-LDRO for side detectors 2026-08-05 14:23:32 +10:00
taco 696a82d7c2 LR2021 multi-SF support (side detectors) 2026-08-05 14:23:32 +10:00
ViezeVingertjes b155081882 Merge remote-tracking branch 'upstream/dev' into fix/scoped-reply-routing 
# Conflicts:
#	examples/simple_repeater/MyMesh.cpp
 2026-08-04 11:49:58 +02:00
ViezeVingertjes fad11c90f3 Fix replies dropped when flood.max.unscoped is low 2026-08-03 22:57:12 +02:00
Scott Powell 0fd11ed223 * bounds check added for anon_req reply_path_len 2026-08-04 01:00:31 +10:00
ripplebizandGitHub c86e63d2f5 Merge pull request #2982 from meshcore-dev/config-serializer 
Config serializer
 2026-07-27 17:58:03 +10:00
Scott Powell ee79df4c4f Merge branch 'dev' into config-serializer 
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
 2026-07-24 15:06:48 +10:00
Scott Powell 56274db4ad * build fixes for old ESP32 boards 2026-07-22 19:52:23 +10:00
Scott Powell b8504e55c6 * refactor of Color mapping in UITasks / DisplayDrivers 
* color displays now with a new light theme
 2026-07-22 16:03:33 +10:00
Florent c644720ea7 uitask: screen and radio poweroff moved to board 2026-07-17 08:29:31 -04:00
fdlamotteandGitHub 76c6e73fb6 Merge branch 'dev' into repeater_btn 2026-07-17 06:55:19 -04:00
Scott Powell 85285c6cbc Merge branch 'dev' into config-serializer 2026-07-16 17:22:28 +10:00
ripplebizandGitHub b55d69e57a Merge pull request #1983 from rgregg/rak-ethernet 
Support for RAK ethernet module
 2026-07-15 18:53:38 +10:00
Scott Powell 2af1e6d099 * first draft of new ConfigSerializer. (simple embedded JSON prefs) 2026-07-15 01:23:57 +10:00
Quency-D 4d0ba1516c Remove the watchdog feeding operation from each iteration of the loop to reduce power consumption. 2026-07-14 17:23:13 +08:00
Ryan Gregg 16b76bd35a Merge remote-tracking branch 'upstream/dev' into rak-ethernet 
# Conflicts:
#	examples/companion_radio/main.cpp
 2026-07-13 23:06:00 -07:00
Florent 2efb3af69b repeater: poweroff on long press 2026-07-06 08:40:56 -04:00
Quency-DandGitHub 2867542cfa Merge branch 'dev' into solar-watchdog 2026-07-04 16:47:37 +08:00
Neil Alexander 0d7379520f Fix recv_pkt_region incorrect usage 
The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket`
but direct/non-flood packets would never pass through that function, so the pointer was
not cleared for them.

`sendFloodReply` would then later use it blindly, which meant that the response would
either inherit the region from the last flood packet, or refer to a non-initialised pointer
if no region floods had been received yet.
 2026-07-02 09:28:41 +01:00
taco 1f9bb67400 return bool when setting rx boost 2026-06-26 07:44:01 +10:00
taco 5d0ff7fe6e remove guard on MyMesh::setRxBoostedGain() 2026-06-26 07:06:37 +10:00
Ryan Gregg a206f3e066 Merge remote-tracking branch 'upstream/dev' into rak-ethernet 
# Conflicts:
#	docs/faq.md
#	examples/companion_radio/main.cpp
 2026-06-20 14:39:03 -07:00
Wessel Nieboer 7c8e092457 Have CAD be a separate toggle (set cad on/off) 2026-06-14 15:20:58 +02:00
Wessel Nieboer 4f9a091671 Use hardware channel activity detection for checking interference 2026-06-14 15:19:18 +02:00
Quency-DandGitHub 9100a58671 Merge branch 'dev' into cli-lna-command 2026-06-10 11:30:04 +08:00
Scott Powell 8c0d5c5b24 * version 1.16.0 2026-06-06 21:09:38 +10:00
Scott Powell 8fc2da5c98 * default now 8, per the will of the peoples. 2026-06-06 21:00:58 +10:00
Scott Powell 5f6821bb66 * new CLI config: flood.max.advert (default 16) 2026-06-06 13:09:24 +10:00
ripplebizandGitHub 999e20a4c2 Merge pull request #1687 from IoTThinks/MCdev-PowerSaving-for-all-esp32-repeaters-202602 
Added PowerSaving for all ESP32-based repeaters
 2026-06-04 13:31:51 +10:00
Scott Powell f66c1d0258 * simplified the new flood.max.unscoped pref 2026-06-02 14:15:33 +10:00
ripplebizandGitHub 09349c5b28 Merge pull request #2661 from mrzarquon/mrz/flood_max_unscoped 
Implement flood.max.unscoped to allow selective repeating of unscoped messages
 2026-06-02 14:00:33 +10:00
Chris Barker a33f3011a5 Feat: Adds flood.max.unscoped setting 
Before this commit, there was no way to set a different max hop count
for unscoped messages.

Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
 2026-06-01 21:30:17 +01:00
Scott Powell 760bb5951d * Bug fix: adding neighbor when path_mode != 0 2026-06-01 23:08:39 +10:00
Kevin Le 36a44de119 Reduced time drift from 60s/day to 7s/day for ESP32-based repeaters with power saving. 2026-05-28 15:13:14 +07:00
Kevin Le a3d20d6209 Let ESP32-based repeaters to sleep immediately receiving and process a LoRa packet 2026-05-28 15:10:36 +07:00
AtlavoxDev e5dab6b999 Rename bootComplete() to onBootComplete() for naming consistency 
Matches the existing event-style lifecycle hooks on MainBoard
(onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.
 2026-05-25 09:50:28 -04:00
AtlavoxDev 39a69b86c3 Add MainBoard::bootComplete() hook for boot-indicator LED feedback 
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
 2026-05-25 09:04:47 -04:00
Rastislav VysokyandGitHub 40180b8fe6 Update repeater flood advert interval to 47 hours 2026-05-21 14:50:58 +02:00
Ryan Gregg 87bed4946c Merge remote-tracking branch 'upstream/dev' into rak-ethernet 
# Conflicts:
#	examples/companion_radio/main.cpp
 2026-05-18 20:57:28 +00:00
Quency-DandGitHub 12e6899580 Merge branch 'dev' into cli-lna-command 2026-05-09 18:19:31 +08:00
Quency-DandGitHub ec9fe67afe Merge branch 'dev' into solar-watchdog 2026-05-09 18:08:32 +08:00
Scott Powell 0a8a0a4904 * Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power() 2026-05-01 14:47:07 +10:00