Track dirty state per-field in handleInput. savePrefs() on exit only
if at least one value was actually modified. Buzzer is excluded — it
already saves immediately via toggleBuzzer(). markClean() resets the
flag each time the settings screen is opened.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
lowBatIndex(), autoOffIndex(), gpsIntervalIndex() each called
getNodePrefs() independently without null check, while renderItem()
had its own guarded copy. Added null checks consistent with the rest
of the class. Also initialize _node_prefs to NULL in UITask constructor.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace linear voltage-to-percent formula with a LiPo discharge curve
lookup table and linear interpolation. The curve is then rescaled so
that low_batt_mv (configurable shutdown threshold) maps to 0% and
4200mV maps to 100%, preserving the non-linear shape regardless of
the chosen threshold.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Filter contact list to ADV_TYPE_CHAT only — excludes repeaters, rooms,
and sensors which cannot receive direct chat messages.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Favourite contacts (flags & 0x01 set by companion app) appear at the
top of the contact picker, marked with '*'. Non-favourites appear
below. The favourite bit is already synced by the existing protocol
via CMD_ADD_UPDATE_CONTACT — no protocol changes needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Watchdog: nRF52840 hardware WDT with 30s timeout, runs during sleep.
Resets device if main loop stalls for >30s. Pets in every loop()
iteration so normal operation never triggers it.
QuickMsgScreen: new UI screen accessible from home screen pages.
Two-phase UI: contact picker (shows all contacts with hop count),
then predefined message picker (location, I'm OK, need help, on my
way, ETA 10min, ETA 30min). Location message uses live GPS fix if
available. Sends via the_mesh.sendMessage() and shows sent/error alert.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Save last known unix timestamp to /rtc_save on shutdown and restore it
on startup, so the clock shows correct time immediately after restart
without waiting for GPS fix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- CPU sleep: board.sleep(0) in main loop puts NRF52 into WFE/sd_app_evt_wait
between iterations; wakes on any interrupt (radio, BLE, timer). Largest
power saving of the three changes.
- VBAT_ENABLE gating: voltage divider now powered only during ADC read
(HIGH for 10ms, then LOW). Previously stayed HIGH continuously.
Fixed in both variant.cpp (init) and WioTrackerL1Board::getBattMilliVolts().
- LED off with display: PIN_LED is cleared when auto-off triggers and
restored (handed back to userLedHandler) when display wakes. Avoids
idle LED current draw during screen-off periods.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add GPS configuration to NodePrefs structure and persist the GPS
enabled state when toggled via UI. This ensures GPS settings are
retained across device restarts.
The current logic only works for active high LEDs. Some boards need
an active low level control and therefore they set LED_STATE_ON to 0.
Take this into account and use the correct LED pattern for both cases.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
This should significantly reduce power consumption in hibernation.
Fixes: #1014
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Signed-off-by: Frieder Schrempf <frieder@fris.de> # generalize for all radios and UIs
* MomentaryButton: new constructor 'multiclick' param
* WIoTrackerL1: now just use joystick, joystick press for KEY_ENTER, no multi-click for snappier UI
- Add genericVibration class with 5-second cooldown and 1-second pulse
- Integrate vibration triggers for new messages and contact discoveries
- Add conditional compilation support with PIN_VIBRATION guard
- Implement abstract interface for vibration in UITask system
- Add translateUTF8ToBlocks() method to convert UTF-8 characters to displayable blocks
- Add drawTextEllipsized() method for text truncation with ellipsis
- Apply UTF-8 filtering to node names, recent contacts, and message content
- Use ellipsized text rendering for recent contacts to prevent overflow
- Addresses PR feedback by moving text processing to DisplayDriver level
