New M5Stack Cardputer ADV variant (ESP32-S3, ST7789 TFT, built-in TCA8418
QWERTY keyboard, PI4IOE5V6408 LoRa-cap IO-expander autodetect), and a
KeyShield accessory variant for the existing LilyGO T-Echo Lite (external
TCA8418 T9 keypad + AW21009 backlight driver). Both keyboards share one
ENV_USE_TCA8418 polling block in UITask.cpp::loop(), coexisting with the
unrelated CardKB support (different chip/address/flag).
Fixes carried in from the contributed T-Echo Lite code: swapped GPS RX/TX
pins, TX-LED hooks, TCXO voltage, missing GxEPD2_122_T61 panel include.
Fixed during integration: I2C bus was probed for an RTC before Wire.begin()
configured its pins on Cardputer ADV (silent RTC autodetect failure).
Added dedicated *_solo_dual release envs for both boards (auto-picked up by
the solo-firmware release workflow). Gave the T-Echo Lite KeyShield solo
build -Os/-Ofast-unflag like every other nRF52 solo build (was missing,
cut flash usage from 90.7% to 61.4%).
Ported the shared misc-fixed 6x9 font (full Latin/Greek/Cyrillic, opt-in via
OLED_MISC_FIXED_FONT) to ST7789Display for the Cardputer's on-screen
keyboard. ST7789Spi isn't Adafruit_GFX-based like the other single-font
drivers, and this panel's logical->physical scale is non-integer, so glyphs
are re-packed to XBM and blitted through the existing drawXbm(), which
already does correct fractional-scale boundary math, rather than
duplicating that logic.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The screen faded as the device was used: text went grey a few updates
after it was drawn, while whatever had just changed stayed crisp. Only a
full refresh brought it back, and the next few updates ate it again.
A partial update is differential -- the controller drives only the pixels
that differ between its "current" (0x24) and "previous" (0x26) RAM and
leaves the rest to hold their own charge, which this panel doesn't do
well. Priming the previous-image RAM with the inverse of the incoming
frame makes every pixel a difference, so all of them get driven to their
target, in both directions.
The inverse matters: priming with flat white makes only white->black a
difference, so ink is re-driven but never erased and every screen ever
shown accumulates as a ghost. Confirmed on hardware, both ways round.
Costs one extra full-screen RAM write (a few ms of SPI). The refresh
itself is unchanged -- the waveform clocks the whole panel regardless of
how many pixels it drives -- so nothing got slower. Clearing ghosts is
still the periodic full refresh's job (Settings > Full rfsh), which can
now stay off.
The helper needs GxEPD2_BW's private _buffer/_page_height, so it goes in
the patched copy of the header, which every e-ink build now includes
unconditionally rather than only screenshot-enabled ones. All e-ink
variants pin GxEPD2 1.6.2, the version that copy tracks.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Add lib/GxEPD2-patch/src/GxEPD2_BW.h: local patched copy of GxEPD2_BW.h
that exposes getBuffer()/getBufferSize() under ENABLE_SCREENSHOT guard.
Include guard (_GxEPD2_BW_H_) prevents double-inclusion of the installed
library version.
- GxEPDDisplay.h: use patched header via relative include when
ENABLE_SCREENSHOT so the patch takes precedence over the installed lib
(PlatformIO adds library paths before -I build_flags).
- DisplayDriver.h: add virtual getBuffer()/getBufferSize()/getDisplayType()
defaults (nullptr/0/0) under ENABLE_SCREENSHOT.
- SH1106Display.h / SSD1306Display.h / GxEPDDisplay.h: add concrete overrides;
getDisplayType() returns 0 (OLED) or 1 (e-ink).
- MyMesh.cpp/h: replace fragile C-cast with virtual dispatch in
handleScreenshotRequest(); extend 5-byte header to 6 bytes by appending
display_type so the host tool can decode the correct pixel layout.
- tools/screenshot.py: parse 6-byte header; add eink_buffer_to_image()
that decodes the row-major MSB-first GxEPD2 buffer with DISPLAY_ROTATION=1
(phys_x = 127-ly, phys_y = lx); dispatch on display_type.
- variants/wio-tracker-l1-eink/platformio.ini: add
[env:WioTrackerL1Eink_companion_dual_dev] with ENABLE_SCREENSHOT.
- variants/wio-tracker-l1/platformio.ini: unchanged (OLED env already exists).
Builds verified: WioTrackerL1Eink_companion_dual_dev SUCCESS,
WioTrackerL1Eink_companion_radio_ble SUCCESS (unaffected).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
JakubandClaude Opus 5
Rastislav Vysoky
Scott Powell