A message containing a line break drew two words on top of each other in
the fullscreen reader. wrapLines() treated '\n' as an ordinary character:
it measured it via getCodepointWidth() -- which reports a full 6px cell
for it, since 0x0A sits below the font's first glyph -- and copied it into
the wrapped line. Both display drivers' print() then acts on '\n' by
resetting the cursor to x=0 and stepping down one row, so the tail of that
line was drawn straight over the following one.
wrapLines() now ends the line at '\n'/'\r' (CRLF counts as one break) and
consumes the byte rather than emitting it, preserving blank lines the
sender typed while still skipping degenerate empty wrap segments so the
loop can't stall. This covers the fullscreen view and the history list's
portrait bubbles, which share the function.
drawTextEllipsized() folds newlines into spaces for the same reason: it
draws one line clipped to max_width, and the compact one-line message
previews in the landscape list feed it raw message bodies. A space keeps
the words apart and measures the same, so the ellipsis maths is unchanged;
for names and labels it's a no-op.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
If Bluefruit.begin fails, BLE OTA mode won't actually start and the board might require a reboot to reattempt.
Fixes:
- Bluefruit.begin returns false in NRF52Board.startOTAUpdate if OTA mode fails to start. User is notified of the fault through existing error message in CommonCLI and can reattempt "start ota" command.
Satellite count alone is a poor proxy for fix quality -- few satellites
in good geometry can beat many in poor geometry. LocationProvider now
exposes getHDOP() (default -1 = unsupported); MicroNMEA implements it.
isLocFixReady() prefers HDOP <= 2.0 when available, falling back to the
old >=8 satellite threshold for providers that don't report it (e.g.
RAK12500/u-blox).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-detected at boot on Wire1/Grove (addr 0x5F) -- no setting to flip, and a
no-op on boards without that bus or with nothing attached. This UI's key
codes (KEY_LEFT/UP/DOWN/RIGHT/ENTER/CANCEL) already match CardKB's own byte
protocol, so most input needs zero translation and flows through the same
key queue as physical buttons.
Two bytes get remapped in UITask::pollCardKB():
- Enter, only when the on-screen keyboard's plain grid state is active (no
placeholder/accent popup, not in cursor-mode), becomes a new KEY_KB_ENTER
sentinel meaning "submit the field" -- reusing plain KEY_ENTER there would
insert a stray character, since a CardKB typist's row/col never reflect an
intentional grid selection. Everywhere else Enter is untouched, so
selecting a placeholder or committing an accent still works normally.
- Tab (otherwise unused) becomes KEY_CONTEXT_MENU, standing in for the
"Hold-Enter" long-press gesture CardKB has no way to produce -- without it,
~30 context menus across the UI (message reply/navigate, Bot/Admin/
Repeater, ...) would be unreachable from the keyboard alone.
KeyboardWidget gains a direct-typing path: printable ASCII inserts straight
at the cursor bypassing the grid, Backspace deletes, KEY_KB_ENTER submits.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean; also
smoke-tested Heltec_mesh_solar_companion_radio_ble (no ENV_PIN_SDA/SCL) to
confirm zero regression on boards without the feature.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
SerialEthernetInterface.cpp is compiled for every nRF52 target because
PlatformIO builds all .cpp files under src/. It includes
SerialEthernetInterface.h, which unconditionally pulls in
<RAK13800_W5100S.h> -- a library only present in the RAK4631 Ethernet
env's lib_deps. As a result any other nRF52 board (e.g. Heltec T114)
fails to build with 'RAK13800_W5100S.h: No such file or directory'.
Wrap the contents of both files in '#ifdef ETHERNET_ENABLED' so they
compile to empty translation units on non-Ethernet builds. RAK4631
Ethernet envs define ETHERNET_ENABLED and are unaffected.
Fixes#2985
Improvements:
- Add condition to only turn off display if on (avoids wedging the shutdown on some displays)
- Reset LoRa radio before calling radio_driver.powerOff() to ensure it is in a known good state (and will accept the command)
- Ensure SPI is started so LoRa radio commands can be sent (some shutdowns can happen before this)
- Add gate for P_LORA_NSS pin defined before writing to the pin
Renamed the vestigial Lemon/default font-switch naming (setLemonFont/
isLemonFont/drawLemonChar/lemonXAdvance/_use_lemon -> setSingleFont/
isSingleFont/drawGlyph/glyphXAdvance/_single_font) across DisplayDriver.h
and both concrete drivers -- both have been permanently single-font for
several commits, so the old names invited a future reader to think a
real switch still existed. Pure identifier rename, no logic changed.
Also extracted the byte-identical "SenderName: " prefix-splitting in
MyMeshBot.h's tryBotReplyChannel()/tryBotChannelCommand() into a shared
botChannelSenderSplit(), mirroring the existing botRoomSenderName().
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
drawLemonChar()'s "y" is the top of the current text row on SH1106 (real
glyphs render at y + 7 + yo + row), unlike GxEPDDisplay's version, where
y IS the baseline. The undefined-glyph fallback box copied GxEPD's
y - 7*sz formula verbatim during the font-unification pass, sending it
7px above the row's top edge -- into the previous line's space. Drawing
it at plain y (already baseline minus the font's 7px ascent) lands it in
the same relative position GxEPD's version occupies, within its own row.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.
Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:
- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
so a value already out-of-range could get stuck unreachable; fixed
commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
always returned to the Nodes picker even when Admin was opened
directly from a node's Hold-Enter action -- now returns to wherever
it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
so cycling to the 2nd/3rd candidate always came out lowercase --
fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
while scrolled up to an older one silently relabeled the view onto a
different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
ch_notif_muted/ch_fav_bitmask despite its own contract comment
requiring it (now far more reachable via the on-device Delete);
an all-zero hex secret silently self-deleted the channel it was
just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
directly instead of via its head offset, silently wrong once the
ring wraps (8+ rooms/session) -- the new on-device Logout depends
on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
toggle and the dead LemonFont.h (retired by the earlier misc-fixed
font unification, zero remaining includes); fixed a copy-pasted
"5x7" comment (font is 6x9), two meaningless dead ternaries, and an
OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
initializers inside aggregate-init: this toolchain's actual nRF52
build (unlike env:native) has no explicit -std= override, so it
predates C++14's aggregate-with-default-member-initializer rule.
Given an explicit constructor instead -- portable regardless of
standard, all existing field-table literals unchanged.
Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.
Build-verified on WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
JakubandClaude Opus 5
entr0p1
liamcottle
ripplebizandGitHub
taco
Alexander Hoffer
=UltimateCodeWarrior
fdlamotteandGitHub
NickDunkleeandGitHub
Ryan Gregg