Commit Graph
1270 Commits
Author SHA1 Message Date
liamcottle 834ad722a4 remove old rak ethernet interface 2026-07-28 03:18:54 +12:00
liamcottle 203fd4e407 refactor rak13800 to new ethernet interface class 2026-07-28 03:18:54 +12:00
liamcottle e672679d6e refactored companion interfaces to allow for multiple active connection modes 2026-07-28 03:18:54 +12:00
liamcottle b4143a4402 rename class 2026-07-28 03:18:54 +12:00
liamcottle 5de857f8f8 initial ch390 ethernet support for thinknode m7 companion 2026-07-28 03:18:54 +12:00
ripplebizandGitHub c86e63d2f5 Merge pull request #2982 from meshcore-dev/config-serializer
Config serializer
2026-07-27 17:58:03 +10:00
ripplebizandGitHub 301bc10dd3 Merge pull request #3034 from meshcore-dev/ui-color-refactor
UI color refactor
2026-07-27 17:45:12 +10:00
JakubandClaude Sonnet 5 7b6ae8e2cb feat(gps): use HDOP for !gps fix readiness, satellite count as fallback
Satellite count alone is a poor proxy for fix quality -- few satellites
in good geometry can beat many in poor geometry. LocationProvider now
exposes getHDOP() (default -1 = unsupported); MicroNMEA implements it.
isLocFixReady() prefers HDOP <= 2.0 when available, falling back to the
old >=8 satellite threshold for providers that don't report it (e.g.
RAK12500/u-blox).

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-24 22:49:17 +02:00
taco 6b83de507d SX1268: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco 0d2b988f24 STM32WLx: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco c56928347f LLCC68: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:39 +10:00
taco ea5d7c8bf5 LR1110: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:46:36 +10:00
taco fae4803158 SX1262: add PREAMBLE_DETECTED to reported irq flags 2026-07-25 00:38:44 +10:00
Scott Powell f83ad03e5e * T114 display fix 2026-07-24 18:35:56 +10:00
Scott Powell 0c04a47355 * fixed for mono ST7789 display driver 2026-07-24 15:31:22 +10:00
Scott Powell 3857f45826 * monochrome displays now do _not_ invert titlebar 2026-07-24 15:14:56 +10:00
Scott Powell ee79df4c4f Merge branch 'dev' into config-serializer
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
Scott Powell a96a66aa99 * build fixes for NullDisplayDriver 2026-07-22 18:55:59 +10:00
Scott Powell b8504e55c6 * refactor of Color mapping in UITasks / DisplayDrivers
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
JakubandClaude Sonnet 5 7cae6470bf feat(ui): CardKB (I2C keyboard) support with full keyboard-only navigation
Auto-detected at boot on Wire1/Grove (addr 0x5F) -- no setting to flip, and a
no-op on boards without that bus or with nothing attached. This UI's key
codes (KEY_LEFT/UP/DOWN/RIGHT/ENTER/CANCEL) already match CardKB's own byte
protocol, so most input needs zero translation and flows through the same
key queue as physical buttons.

Two bytes get remapped in UITask::pollCardKB():
- Enter, only when the on-screen keyboard's plain grid state is active (no
  placeholder/accent popup, not in cursor-mode), becomes a new KEY_KB_ENTER
  sentinel meaning "submit the field" -- reusing plain KEY_ENTER there would
  insert a stray character, since a CardKB typist's row/col never reflect an
  intentional grid selection. Everywhere else Enter is untouched, so
  selecting a placeholder or committing an accent still works normally.
- Tab (otherwise unused) becomes KEY_CONTEXT_MENU, standing in for the
  "Hold-Enter" long-press gesture CardKB has no way to produce -- without it,
  ~30 context menus across the UI (message reply/navigate, Bot/Admin/
  Repeater, ...) would be unreachable from the keyboard alone.

KeyboardWidget gains a direct-typing path: printable ASCII inserts straight
at the cursor bypassing the grid, Backspace deletes, KEY_KB_ENTER submits.

Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean; also
smoke-tested Heltec_mesh_solar_companion_radio_ble (no ENV_PIN_SDA/SCL) to
confirm zero regression on boards without the feature.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-21 23:43:33 +02:00
Scott Powell 78240e9477 * optimised: value-init not needed 2026-07-21 19:22:09 +10:00
ripplebizandGitHub 4157e43ace Merge pull request #3005 from axhoff/agent/fix-ble-reconnect
Fix bonded BLE reconnects on ESP32
2026-07-21 19:17:34 +10:00
ripplebizandGitHub 8b048ab19a Merge pull request #3007 from axhoff/agent/synchronize-ble-receive-queue
Synchronize the ESP32 BLE receive queue
2026-07-21 18:10:37 +10:00
Liam CottleandGitHub 7124fa1439 Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c
Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)
2026-07-21 19:17:32 +12:00
Alexander Hoffer 4d4d7c3746 refactor: use FreeRTOS BLE receive queue 2026-07-21 07:17:01 +01:00
=UltimateCodeWarrior 0de2b4fc5f Move Supreme OLED address to variant config
Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.
2026-07-20 19:24:38 -07:00
fdlamotteandGitHub d2fd1fdaa6 Merge pull request #2887 from spinda/thinknode-m3-dev
Fix GPS and LEDs on ThinkNode M3
2026-07-20 17:42:30 -04:00
NickDunkleeandGitHub 59e9a79eac Merge branch 'dev' into rak-advert-hw-encryption 2026-07-20 13:29:08 -06:00
fdlamotteandGitHub 427cd7c263 Merge pull request #2987 from entr0p1/fix/nrf52-shutdownperipherals
NRF52Board - ShutdownPeripherals() housekeeping
2026-07-20 11:53:56 -04:00
Alexander Hoffer 79dc1de6fc fix: preserve UTF-8 advert names 2026-07-20 15:47:03 +01:00
Alexander Hoffer 9fd6b419e5 fix: preserve bonded BLE reconnects 2026-07-20 15:47:03 +01:00
Alexander Hoffer 3885c67c8e fix: synchronize BLE receive queue 2026-07-20 15:47:03 +01:00
taco ab5c45f516 fix: clear the correct IRQ flag for timeout on preamble detected 2026-07-20 21:05:12 +10:00
taco 121b72712b LR1110: add setter methods for preambleMillis and payloadMillis 2026-07-20 19:52:57 +10:00
taco ae48072ff0 SX1262: add setter methods for preambleMillis and payloadMillis 2026-07-20 19:52:57 +10:00
Liam CottleandGitHub fdd4d8a610 Merge pull request #2989 from rgregg/fix-nrf52-ethernet-build
Fix nRF52 builds broken by unconditional RAK Ethernet include
2026-07-20 20:58:26 +12:00
ripplebizandGitHub dc7dd5105e Merge pull request #2977 from oltaco/rx-irq-timeout
Add IRQ timeout logic for SX1262 and LR1121
2026-07-20 14:14:02 +10:00
Ryan Gregg cc221330ba Fix nRF52 builds: guard SerialEthernetInterface with ETHERNET_ENABLED
SerialEthernetInterface.cpp is compiled for every nRF52 target because
PlatformIO builds all .cpp files under src/. It includes
SerialEthernetInterface.h, which unconditionally pulls in
<RAK13800_W5100S.h> -- a library only present in the RAK4631 Ethernet
env's lib_deps. As a result any other nRF52 board (e.g. Heltec T114)
fails to build with 'RAK13800_W5100S.h: No such file or directory'.

Wrap the contents of both files in '#ifdef ETHERNET_ENABLED' so they
compile to empty translation units on non-Ethernet builds. RAK4631
Ethernet envs define ETHERNET_ENABLED and are unaffected.

Fixes #2985
2026-07-19 10:17:08 -07:00
entr0p1 aee53a8c3e NRF52Board - ShutdownPeripherals() housekeeping
Improvements:
- Add condition to only turn off display if on (avoids wedging the shutdown on some displays)
- Reset LoRa radio before calling radio_driver.powerOff() to ensure it is in a known good state (and will accept the command)
- Ensure SPI is started so LoRa radio commands can be sent (some shutdowns can happen before this)
- Add gate for P_LORA_NSS pin defined before writing to the pin
2026-07-19 23:59:12 +10:00
taco b28bf00348 fix: setMaxPacketMillis() should return void 2026-07-19 22:06:36 +10:00
Scott Powell a0b52be4ad * RP2040 build fixes
* new prefs file now "/prefs.json"
2026-07-18 20:12:21 +10:00
Scott Powell 2189f2294c * added prefs initialisers to match original zeroed state 2026-07-18 19:22:53 +10:00
JakubandClaude Sonnet 5 273fbfde7a chore: pre-release cleanup pass (Lemon-era naming, bot sender parsing dedup)
Renamed the vestigial Lemon/default font-switch naming (setLemonFont/
isLemonFont/drawLemonChar/lemonXAdvance/_use_lemon -> setSingleFont/
isSingleFont/drawGlyph/glyphXAdvance/_single_font) across DisplayDriver.h
and both concrete drivers -- both have been permanently single-font for
several commits, so the old names invited a future reader to think a
real switch still existed. Pure identifier rename, no logic changed.

Also extracted the byte-identical "SenderName: " prefix-splitting in
MyMeshBot.h's tryBotReplyChannel()/tryBotChannelCommand() into a shared
botChannelSenderSplit(), mirroring the existing botRoomSenderName().

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-17 21:02:33 +02:00
JakubandClaude Sonnet 5 fe1e0d29ce fix(display): undefined-glyph box overlapped the line above on OLED
drawLemonChar()'s "y" is the top of the current text row on SH1106 (real
glyphs render at y + 7 + yo + row), unlike GxEPDDisplay's version, where
y IS the baseline. The undefined-glyph fallback box copied GxEPD's
y - 7*sz formula verbatim during the font-unification pass, sending it
7px above the row's top edge -- into the previous line's space. Drawing
it at plain y (already baseline minus the font's 7px ascent) lands it in
the same relative position GxEPD's version occupies, within its own row.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-17 20:53:56 +02:00
JakubandClaude Sonnet 5 453dc5e570 feat(admin): typed Radio/Routing field editors; pre-release audit fixes
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.

Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:

- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
  so a value already out-of-range could get stuck unreachable; fixed
  commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
  always returned to the Nodes picker even when Admin was opened
  directly from a node's Hold-Enter action -- now returns to wherever
  it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
  so cycling to the 2nd/3rd candidate always came out lowercase --
  fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
  while scrolled up to an older one silently relabeled the view onto a
  different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
  ch_notif_muted/ch_fav_bitmask despite its own contract comment
  requiring it (now far more reachable via the on-device Delete);
  an all-zero hex secret silently self-deleted the channel it was
  just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
  directly instead of via its head offset, silently wrong once the
  ring wraps (8+ rooms/session) -- the new on-device Logout depends
  on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
  toggle and the dead LemonFont.h (retired by the earlier misc-fixed
  font unification, zero remaining includes); fixed a copy-pasted
  "5x7" comment (font is 6x9), two meaningless dead ternaries, and an
  OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
  initializers inside aggregate-init: this toolchain's actual nRF52
  build (unlike env:native) has no explicit -std= override, so it
  predates C++14's aggregate-with-default-member-initializer rule.
  Given an explicit constructor instead -- portable regardless of
  standard, all existing field-table literals unchanged.

Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.

Build-verified on WioTrackerL1_companion_solo_dual.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-17 19:38:51 +02:00
ripplebizandGitHub 795989b918 Merge pull request #2966 from Quency-D/heltec-rc32
Add Heltec rc32 board
2026-07-17 23:23:29 +10:00
taco 0bd871cde6 add IRQ timeout logic for LR11X0 2026-07-17 21:45:31 +10:00
taco 79ef74ea8d add IRQ timeout logic for SX1262 2026-07-17 21:33:57 +10:00
Scott Powell d9f1e12b21 * loadSerial(), support for \n and \r 2026-07-17 21:23:40 +10:00
taco 975a673efd add calcMaxPacketMillis 2026-07-17 21:15:09 +10:00