Replaces the 8 separate Latin-diacritic alt-alphabet pages (Polish, Czech,
Slovak, German, French, Spanish, Portuguese, Nordic) with one popup: Hold
Enter on a Latin letter that has accented variants (a c d e i l n o r s
t u y z) opens a floating horizontal strip of that letter's accents,
anchored over its own row so the grid stays visible underneath (LEFT/
RIGHT picks, Enter inserts via a new shared insertGlyph() helper, Cancel
dismisses). Holding a letter with no variants is a no-op. Cyrillic/Greek
remain full alt-alphabet pages; NodePrefs::keyboard_alt_alphabet shrinks
from 11 to 3 values accordingly -- an old saved Polish..Nordic value just
clamps to Latin via DataStore.cpp's existing range check, no migration
code needed.
Freeing Hold-Enter on letter cells required moving cursor-mode's own
trigger: UP from the top letter row now enters it instead of wrapping to
the special row. To keep that wrap reachable, cursor mode's UP/DOWN
(Home/End) continue the wrap once already at that boundary -- UP again
lands on the special row, DOWN again back on the letter grid -- reusing
the same proportional column mapping the old direct wrap used.
Diagnostics' font-coverage sample swaps its 8 per-language lines for one
line sampling the new accent table. Docs (message_screen, settings_screen,
solo_ui_framework) and release-notes updated to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.
Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:
- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
so a value already out-of-range could get stuck unreachable; fixed
commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
always returned to the Nodes picker even when Admin was opened
directly from a node's Hold-Enter action -- now returns to wherever
it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
so cycling to the 2nd/3rd candidate always came out lowercase --
fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
while scrolled up to an older one silently relabeled the view onto a
different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
ch_notif_muted/ch_fav_bitmask despite its own contract comment
requiring it (now far more reachable via the on-device Delete);
an all-zero hex secret silently self-deleted the channel it was
just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
directly instead of via its head offset, silently wrong once the
ring wraps (8+ rooms/session) -- the new on-device Logout depends
on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
toggle and the dead LemonFont.h (retired by the earlier misc-fixed
font unification, zero remaining includes); fixed a copy-pasted
"5x7" comment (font is 6x9), two meaningless dead ternaries, and an
OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
initializers inside aggregate-init: this toolchain's actual nRF52
build (unlike env:native) has no explicit -std= override, so it
predates C++14's aggregate-with-default-member-initializer rule.
Given an explicit constructor instead -- portable regardless of
standard, all existing field-table literals unchanged.
Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.
Build-verified on WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- MessagesScreen: shrink message boxes to fit content and anchor them
right (outgoing) / left (incoming), like typical messengers; move
the [+ send] compose button to the right edge to match; fix its
frame margins (no descenders in the label made the symmetric padding
look uneven) and reclaim the freed 2px for the message list.
- KeyboardWidget: add Hold-Enter cursor-positioning mode (LEFT/RIGHT
move, UP/DOWN jump to start/end, Enter/Cancel exit) with a visual
"CURSOR MODE" indicator, so edits and inserts can target any point
in the typed text instead of always the end.
Message history (DM + channel) now stacks bubbles upward from the compose
row instead of the header, so the newest message sits at the bottom like
a typical messenger, with older messages progressively above. UP/DOWN and
the scrollbar direction are swapped to match; the newest bubble now keeps
the same breathing-room gap against the compose row as it does against
another bubble, instead of touching it.
Keyboard: Shift is one-shot by default (capitalises just the next
letter, then reverts), with Hold-Enter on Shift toggling a persistent
caps-lock for the old sticky behavior. Hold-Enter on Backspace clears
the whole field in one action.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replace the Lemon/default font-switch with a single misc-fixed 6x9 font
(full Latin/Greek/Cyrillic coverage), generated via a new tools/bdf2gfx.py
BDF-to-GFX converter. Removes the keyboard's per-render font-switch
workarounds now that one font fits its cell cleanly.
DiagnosticsScreen becomes a circular tab carousel (Live / System / Font),
adding a firmware+device+radio info tab and a per-alphabet rendering test
card covering every keyboard language.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin now opens on a This-device / Remote-node chooser. "This
device" is a login-free 2-tab carousel (System: Name/Radio/TX power/
Lat/Lon, Actions: Send advert/Reboot) mapped onto NodePrefs/sensors and
reusing Settings' own apply chains -- no CommonCLI port. "Remote node..."
opens Tools > Nodes in a pick-mode (borrow-another-screen's-list idiom),
and Nodes gains an "Admin" Hold-Enter action; both converge on the single
canonical UITask::openAdminFor() -> AdminScreen::startFor().
Also:
- KeyboardWidget: opt-in PlaceholderRefreshFn hook for contextual {}-key
CLI command-name completion (word-replacing); default behaviour and all
other keyboard uses unchanged.
- TabBar: ellipsize() re-measures the real "text..." candidate per step
(+ width clamp) so dots can't spill into a neighbour/reserved icon.
- ChannelsView: form rows truncate instead of wrapping.
- Reboot moved off the default-selected Actions row (fires with no confirm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Alarm repeat (Clock Tools):
- NodePrefs::alarm_repeat_mask (weekday bitmask, struct tm::tm_wday
convention) — new Repeat row cycles Off/Daily/Weekdays/Weekends.
computeAlarmNextFire() scans the next 7 days for a matching weekday when
set; evaluateAlarm() only clears alarm_on (one-shot) when the mask is
empty, otherwise re-arms. mask==0 is byte-for-byte the original one-shot
behaviour, so existing users see no change.
On-screen keyboard alphabets (Settings > Keyboard > Alphabet):
- KeyboardWidget reworked from single-byte ASCII cells to UTF-8 codepoints
(insertion, backspace and T9 in-place cycling all codepoint-aware now, so a
multi-byte character is never split) — see kbApplyCapsUtf8/kbUtf8Len/
kbUtf8CharAt/kbUtf8LastCharBytes.
- Cyrillic, Greek and an Extended Latin set (Polish/Czech/Slovak/German/
French/Spanish/Nordic diacritics) join the keyboard's existing #@/abc page
cycle (Latin -> alt alphabet -> Symbols -> Latin) — no new key needed.
NodePrefs::keyboard_alt_alphabet picks which one, if any, is active.
- Lemon font is forced on transiently inside KeyboardWidget::render() (saved
and restored every call) whenever the alt-alphabet page is showing or
already-typed text has non-ASCII bytes, so composing is visible even if
Font is set to Default.
- Each script's caps-shift rule is distinct and documented in
kbApplyCapsUtf8: flat -0x20 for ASCII/Cyrillic/Greek (with the ё/ς
exceptions), flat -0x20 for Latin-1 (à-þ), and an adjacent-pair -1 for
Latin Extended-A (verified against every character actually used, not a
blanket rule for that whole Unicode block).
NodePrefs schema: two tail-appended fields this session (alarm_repeat_mask,
keyboard_alt_alphabet), SCHEMA_SENTINEL 0xC0DE001B -> 0xC0DE001D,
sizeof(NodePrefs) 2496 -> 2504 (verified via a standalone host compile).
Docs: Clock Tools' Repeat row, Settings > Keyboard > Alphabet, and the
Rooms keyboard note (no longer ASCII-only once an alphabet is enabled).
Not build-verified — no PlatformIO toolchain available this session. Caps
mappings cross-checked against Python's Unicode case tables; UTF-8 literal
bytes verified at the byte level.
Two duplications surfaced by a framework-consistency pass:
- KeyboardWidget applied the a-z shift-uppercase at five draw/commit sites
with an inline `if (caps && ch >= 'a' && ch <= 'z')`. Fold them into one
`kbApplyCaps(ch, caps)` helper.
- The favourites grid drew the empty "+" tile from two branches (the gone-slot
prune and the always-empty slot). Route both through a single `has_contact`
flag so the "+" and the trailing selection-colour reset each live at one site.
No behaviour change. Builds green: WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
T9 keys now read like a phone keypad — each cell is labelled <digit><group>
(e.g. 2abc), with the digit matching what the multi-tap cycle lands on after
the letters. No separator space: the widest group (".,!?'-") plus the digit
already fills a narrow 128px OLED cell at 3 columns.
Also fills in the v1.22 release notes (T9 keyboard, trail auto-save, Clock
Tools in Tools, Map/Shutdown reorderable, battery-read fix, the UI-audit fix
batch, discover-dedup, favourites self-heal, preset-name placeholder, OLED
frame-skip, e-ink full-refresh) and syncs the solo-feature docs: new Keyboard
settings section, Trail Auto-save row, and Clock Tools reachable from Tools.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The on-screen keyboard grid has been a-b-c...z alphabetical order since
it was first introduced, never an actual QWERTY row layout. The
"QWERTY" name only appeared with the T9 option (needed something to
contrast it against) and was inaccurate from the start.
Trail map dots/diamonds/cross/start markers and the north indicator were
drawn as raw unscaled pixels, so they shrank to near-invisible specks on
landscape e-ink's larger font scale; they now route through the mini-icon
framework (icons.h) like the rest of the UI, and the grid intersection dots
scale with it too. The keyboard's preview/grid separator had the same bug
(hardcoded 1px) and now uses display.sepH().
Also makes UP/DOWN (and the keyboard's LEFT/RIGHT/UP/DOWN) wrap top<->bottom
across every list, menu and form selector, matching the behavior PopupMenu
already had.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Unify on the shared keyboard: WaypointsView drives UITask::keyboard()
instead of its own instance; openKb() clears {loc}/{time} for literal
fields (labels, coordinates). Reclaims the duplicate widget from the heap.
- Icon glyphs on the special row: caps ⇧, space ⎵ (two halves), delete ⌫,
OK ✓ (reuses ICON_CHECK); {} and the page toggle stay text.
- Second character page (symbols), toggled by a "#@"/"abc" key. Tidy the
letters page: drop the duplicate grid space, add the comma, group
punctuation as . , ! ?
- Harden the preview buffers (KB_PREVIEW_CAP) against very wide displays.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
After widening the history buffers, the compose side was still the
bottleneck: the keyboard capped input at 139 bytes and the quick-message
expand buffers were 140. Raise KB_MAX_LEN to 160 (MeshCore's MAX_TEXT_LEN)
and size the expand/compose buffers to MSG_TEXT_BUF, so a message can be
typed, expanded, sent, stored and displayed at the full protocol length on
every path.
The custom-message editor now passes an explicit max bound to its 140-byte
store, so the wider keyboard buffer can't overflow it; the bot editor
already passed per-field maxima.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Eight screens repeated the same if/else block to invert the row
background for selected items. Add DisplayDriver::drawSelectionRow that
sets LIGHT, optionally fills the rect, and leaves the colour as DARK
when sel (so the caller's text renders inverted). 61 lines removed
across SettingsScreen, KeyboardWidget (cells + special row), ToolsScreen,
DashboardConfigScreen, BotScreen, RingtoneEditorScreen (note slots +
menu), NearbyScreen, QuickMsgScreen (4 list views).
Card-style rows (QuickMsg hist, NearbyScreen discover, RingtoneEditor
notes display) keep their original drawRect/partial-fill outline for
unselected — they don't match the simple-invert pattern.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
KeyboardWidget printed the text preview directly via display.print()
without calling translateUTF8ToBlocks first. When a reply prefix
contained a UTF-8 sender name (e.g. Cyrillic), raw multi-byte sequences
reached the display driver on non-Lemon renders.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- GxEPDDisplay: fontAscender only applies to sz=1 with Lemon; sz=2 (NULL font)
was incorrectly getting a 16px cursor offset, causing clock text to render
16px lower than expected and overlap the date line
- KeyboardWidget: compute cell_h from available screen height instead of lh+1;
tighten sep_y to lh so the grid fits within 122px even with Lemon font (lh=20)
- SettingsScreen renderBar: constrain box size to available width so the 5th
buzzer-volume square doesn't overflow past the right edge with Lemon font
- NearbyScreen discover detail: manually truncate b64 public key by charWidth
to guarantee one-line rendering; use dynamic step = (height-hdr)/5 so
Status line doesn't fall off the bottom of the screen
- NearbyScreen contacts detail: merge dist+az into one line and use dynamic
step to fit 5 lines within the display; removes the off-screen Seen: row
- AutoAdvertScreen: replace lineStep() gap before hints with 4px fixed gap
so both hint lines fit within the display with large fonts
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- KeyboardWidget: replace inline placeholder overlay with PopupMenu
- UITask QuickMsgScreen: replace inline CONTACT_PICK/CHANNEL_PICK context
menus with PopupMenu; notif label stored in _ctx_notif_item at open time
- BotScreen: clear placeholder list for trigger field (expansion tokens
would never match incoming literal text)
- MsgExpand: fix APPEND macro off-by-one (oi+_l < out_len-1 → < out_len)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
expandMsg now expands {temp}, {hum}, {pres}, {batt}, {alt}, {lux}, {dist},
{co2} from live sensor readings. The [{}] picker in the on-screen keyboard
shows only sensors currently detected by SensorManager and scrolls when
more than 3 items fit the overlay.
New SensorPlaceholders.h helper keeps sensor-to-keyboard wiring out of
UITask.cpp. MsgExpand.h handles all expansion logic centrally; MyMeshBot
and QuickMsgScreen pass &sensors and batt_volts to each call.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
All three keyboard instances (Settings, QuickMsg, Bot) now show plain
text + cursor without any field-name prefix. Removes the label field
from KeyboardWidget entirely — the screen title already indicates context.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- preview[] increased from 32 to 40 bytes to safely fit max label (15 chars)
+ 20 chars text + cursor + null without snprintf truncation
- KEY_CONTEXT_MENU (long-press ENTER) now treated as CANCEL in keyboard
input handler, restoring BotScreen behavior lost in the refactor
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
All three keyboard implementations (SettingsScreen, QuickMsgScreen, BotScreen)
now share a single KeyboardWidget struct defined in KeyboardWidget.h, eliminating
~480 lines of duplicated render/input logic. Also fixes the SettingsScreen bug
where navigation keys were checked before the placeholder overlay, causing cursor
movement when the overlay was open.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
