- ui-lvgl: navTextEntry()/TextEntry replace eight copies of popup + field +
keyboard wiring; one byte-capped insert callback instead of two.
- ui-new: drawHeadedBubble()/BubbleMark replace the duplicated DM and channel
bubble drawing in MessagesScreen.
- GpsSky::halt(): stopping the receiver ends an unfinished search but keeps
the first-fix time; keyboard cursor blink restarts after a key.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
New message, Nodes (and its Scan popup), Admin and Messages show their
items through one virtual list: a screenful of rows, handed to the next
item as one scrolls out, the scroll extent from the items' heights. 256
contacts: 522 objects and ~950 ms of filling in (frames up to 96 ms)
before, 19 objects at once now; a scrolled frame 28.5 -> 11.7 ms. Nodes
257 -> 49 objects. A new message rewrites Messages' rows in place
(46 -> 20 ms) instead of building the screen again; it's rebuilt only
when "Read all" comes or goes. A held row keeps what it shows until let
go. Perf tools: -D PERF_LISTS, -D PERF_LIST_MUL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The list fill becomes a small job queue (fill/then/fillStart, fillTick with a
25 ms budget per pass). Settings pages build section by section in
schemaRows, with the trailing extras (melodies, prune, quick messages) queued
after them so the order stays; Radio and Repeater build by group, Admin's
repeater pick like the contact list, Diag's Live tab by section. Rebuilds
that restore the scroll flush the queue first. Screens went from 220-360 ms
to 80-175 ms (build + first frame).
Diag's crash line read the core dump in flash every second (~44 ms each);
it is read once now. The perf run times every page and dismisses the USB
popup, which had covered all earlier measurements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dead code gone: anim::fadeHide, radioctl::presetCount, the L2 board's
setSdPower / setGrovePower / expanderOK (awRead, gnssReset now private).
- buttonBar() / barButton() replace 7 copies of the popup button row.
- confirmBody(): one red-button confirm for reboot / power off, reset
counters, admin commands, preset and scope delete.
- tapConfirmed(): the 11 "tap again" buttons share one mechanism, 3 s
everywhere, the label restored when left alone.
- noteLabel() for ~30 wrapped notes.
- localTm() in NodePrefs.h and one MONTHS table: lvgl, MsgExpand, the L1
clock and lock screen.
- The sim keeps UI settings in an in-memory nvs::, so one set of load /
save helpers serves both.
- Asleep, the loop wakes every 50 ms (the button / touch poll), not 20.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Power: the UI loop sleeps until something is due (never with packets
queued); screen off puts the CPU at 80 MHz, the GT911 to sleep (unless a
tap wakes the screen) and the LP5814 in standby. GPS off now cuts the
L76K's rail and UART on the L2 (L2GpsProvider). The battery divider is
powered only for a reading (measured: settles at once); readings within
2 s are reused. The SD mount is retried at most every 5 s.
Fixes: WiFi left on after leaving a scan, live tiles' WiFi kept with the
screen off on the map, an ADC read every second for the status bar, touch
polled on every pass while dark, a scan cutting an update's WiFi, relay
count not refreshing in a channel thread, raw @[nick] in room previews.
Labels skip unchanged text (no redraw).
Helpers: scrollList, dimOverlay, settingRow, flexBox, nvs::get/put,
trailFilePath (a second save in the same minute no longer overwrites),
unreadTotal. Dead code removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Anim.h: screens emerge from the middle (background cover fades, content
drifts 6 px), Home pages slide, popups and toasts rise and fade in
- Theme.h: accent rules (fill = primary action, dim fill = selected, text =
names/counts/modes), theme layer over the default theme, radius tokens,
accent colour picker (Settings > Display & power > LOOK, NVS mc_ui)
- Splash with the Solo and upstream versions
- Status icons in equal cells, L1-style relay marks, path window with a hop
diagram, tile download popup fits the screen (WiFi only in Settings)
- Perf: uncompressed fonts, two 120-line PSRAM buffers (~48 -> ~33 ms per
transition frame); UI_PERF_TEST harness
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Map tools hold trail, live share and arrival alert, with their options
(schema page "Map options") behind one button; back returns to the map
- Nearby gets an advert button: send now (nearby / everyone) + auto-advert
- Home page 3: Repeater, Admin (list of repeaters and room servers),
Diagnostics
- Settings: display, sound, radio (Bluetooth, WiFi), system, keyboard,
contacts & messages; units moved to Display & power
- Status bar: Bluetooth, GPS, alarm, mute, then auto-advert, trail, live
share, repeater, arrival alert in the accent colour
- Fonts: key and route glyphs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AdminSession (login with saved password, CLI round trips, timeouts, field
table, typed values) moves into ui-core; UiCore offers login answers and
CLI replies to it first. ui-new's Tools > Admin becomes a view over it.
L2: node detail > Admin with tabs and per-field popups.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude
JakubandClaude Opus 5.5