Trigger is now stored as typed (e.g. "Ping" stays "Ping").
Case-insensitive matching is preserved by lowercasing both
the trigger and incoming message at comparison time.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
UITask.onBLEDisconnected() sets _next_refresh=0 so the BLE icon
updates instantly instead of waiting for the next polling cycle.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add build-solo-firmwares.yml: auto-detects all _solo_dual envs from platformio.ini, builds in parallel, publishes uf2 files to draft release
- Remove build-wio-tracker-l1-firmwares.yml (replaced by solo workflow)
- Add WioTrackerL1_companion_solo_dual and WioTrackerL1Eink_companion_solo_dual envs
- Wire build-solo-firmwares command in build.sh using _solo_dual suffix
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two independent, default-off toggles under Settings › Radio.
Pwr save: hardware RX duty-cycle (SX126x SetRxDutyCycle via
startReceiveDutyCycleAuto). The chip cycles RX↔sleep and wakes on a preamble —
no MCU state machine; recvRaw reads the packet exactly as in continuous RX.
Falls back to continuous RX on non-SX126x. (Replaces an earlier software-CAD
state machine that fought the hardware: polling a warm-sleeping chip gave a
phantom-busy channel that stalled TX ~4 s and dropped ACKs in the scan gaps.)
Auto pwr: Adaptive Power Control. tx_power_dbm becomes a ceiling; actual TX
power tracks the reverse-link SNR margin (measured above the per-SF demod floor,
EWMA-smoothed, proportional step with a deadband). Feedback comes from direct /
room-server ACKs and, for channels (no ACK), from hearing a repeater rebroadcast
our own flood; a lost confirmation ramps power back up so channel sends can't get
stranded below what the repeaters can hear.
Prefs schema 0xC0DE0009 (rx_powersave, tx_apc). Radio page / name bar show the
live TX power; noise floor reads n/a while duty-cycling.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Restore commented-out EXTERNAL_FLASH_DEVICES/USE_QSPI for reference;
board has no QSPI flash chip — defines were RAK4631 leftovers causing
framework to lock P0.28/P0.30 (joystick UP/LEFT) as QSPI outputs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Board has no QSPI flash chip — EXTERNAL_FLASH_DEVICES/USE_QSPI were
copied from RAK4631. The framework was initialising the QSPI peripheral
on startup, locking P0.28/P0.30 (joystick UP/LEFT) as outputs. Removing
these defines prevents QSPI init entirely.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
QSPI IO0=P0.30 and IO2=P0.28 are wired to joystick LEFT and UP on this
board. QSPI init configures those pins as OUTPUT, blocking button reads.
Disable QSPIFLASH so the joystick works; firmware falls back to internal
flash storage.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Contacts with lastmod=0 or lastmod>now (RTC not synced after reboot but
contacts have timestamps from a prior session) were sorted to the top
because their raw lastmod > 0. Now both cases are normalised to 0 before
the comparison, so unknown-time entries always appear at the bottom.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- TIME mode: call refresh() every 3 s so newly-heard contacts bubble up
to the correct position; previously the list froze at the order captured
when the filter was selected.
- All filters: right-align the distance/age value within the right column
(width - textWidth - 2 px) instead of pinning it to a fixed left edge,
so short strings like "5s" or "3m" sit flush with the longer ones.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Trail.h gpxWaypoints/gpxPoint: snprintf truncation clamp was `> sizeof`
(writing the NUL terminator into the XML stream); corrected to
`>= sizeof - 1` at all 3 sites (<wpt>, <time>, <trkpt>).
- UITask.cpp battMvToPercent: raise 100% ceiling from 4200 → 4170 mV —
the board never charges to 4200, so the indicator was stuck at ~97%.
- Trail.h header comment: corrected RAM cost from "256×12 B=3 KB" to
actual CAPACITY(512)×16 B=8 KB.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NearbyScreen:
- Hold Enter on a list row now shows Navigate and Save waypoint directly,
without entering the detail view first
- TIME added as the last filter slot (LEFT/RIGHT cycles Fav→ALL→…→Snsr→TIME);
time-sort shows age in right column and sorts by last-heard descending
- Save waypoint also available from detail view Options menu
UITask:
- Extract addWaypoint() helper (two overloads: with/without explicit timestamp)
consolidating the full()+add()+saveWaypoints()+alert pattern; TrailScreen
and QuickMsgScreen updated to use it
Fixes:
- SoundNotifier.h: correct NodePrefs.h include path (../NodePrefs.h)
- kbAddSensorPlaceholders: dereference _kb pointer in SettingsScreen,
QuickMsgScreen and BotScreen (signature changed to KeyboardWidget&)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Single-file Web Serial app for GitHub Pages. Connects to the device
over USB CDC, auto-detects <?xml…</gpx> frame from the Export GPX
action, and offers the file as a browser download with an editable
filename (defaults to trail_YYYY-MM-DD.gpx). Resets automatically
after download so back-to-back exports work without reconnecting.
Requires Chrome/Edge (Web Serial API). Enable GitHub Pages from the
repo settings pointing at the branch root or docs/ as needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Deduplicate the snprintf+showAlert pattern used in three mark-as-read
sites into a single private method.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
MODE_SELECT already showed the count; CONTACT_PICK ("Mark as read") and
CHANNEL_PICK ("Mark all read") were silently clearing unread without
any feedback. Count is read before zeroing so the alert is accurate.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move all buzzer/melody dispatch (DM, channel, advert) into a new
SoundNotifier class in SoundNotifier.h, isolating fork-specific sound
code so upstream changes to notify() no longer cause merge conflicts.
The shared playSlot() helper also removes the custom_played
duplication that existed across the three cases.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The enum value and its case label were never emitted after PR #16 —
both dispatch sites in MyMesh.cpp now use advertReceivedFlood or
advertReceivedZeroHop exclusively.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Huw DuddyandGitHub
Scott Powell
MarekZegare4andClaude Sonnet 4.6
Quency-D
Liam CottleandGitHub
formtapez
Quency-DandGitHub
JakubandClaude Opus 4.8