Favourite contacts (flags & 0x01 set by companion app) appear at the
top of the contact picker, marked with '*'. Non-favourites appear
below. The favourite bit is already synced by the existing protocol
via CMD_ADD_UPDATE_CONTACT — no protocol changes needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Watchdog: nRF52840 hardware WDT with 30s timeout, runs during sleep.
Resets device if main loop stalls for >30s. Pets in every loop()
iteration so normal operation never triggers it.
QuickMsgScreen: new UI screen accessible from home screen pages.
Two-phase UI: contact picker (shows all contacts with hop count),
then predefined message picker (location, I'm OK, need help, on my
way, ETA 10min, ETA 30min). Location message uses live GPS fix if
available. Sends via the_mesh.sendMessage() and shows sent/error alert.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Save last known unix timestamp to /rtc_save on shutdown and restore it
on startup, so the clock shows correct time immediately after restart
without waiting for GPS fix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- CPU sleep: board.sleep(0) in main loop puts NRF52 into WFE/sd_app_evt_wait
between iterations; wakes on any interrupt (radio, BLE, timer). Largest
power saving of the three changes.
- VBAT_ENABLE gating: voltage divider now powered only during ADC read
(HIGH for 10ms, then LOW). Previously stayed HIGH continuously.
Fixed in both variant.cpp (init) and WioTrackerL1Board::getBattMilliVolts().
- LED off with display: PIN_LED is cleared when auto-off triggers and
restored (handed back to userLedHandler) when display wakes. Avoids
idle LED current draw during screen-off periods.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Builds and releases only the _settings companion firmware variants
(USB and BLE) which contain the settings screen with display brightness,
buzzer, TX power, auto-off, GPS interval, timezone, low battery threshold,
and battery display mode.
Triggers on tags matching 'wio-tracker-*' (e.g. wio-tracker-v1.0.0)
or manually via workflow_dispatch. Creates a draft GitHub release.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds suffix matching for WioTrackerL1 _settings builds (with settings screen)
so they are picked up automatically by the companion firmware build workflow.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add a new command `region bulk` for defining region hierarchies in a single line. This command allows users to create multiple regions in a single message. Updated the documentation to include usage examples and detailed parameter descriptions.
some older ESP32 boards were pushing the limits of the dram segment causing the linker to fail, especially for ble and wifi firmwares.
lowering OFFLINE_QUEUE_SIZE reduces dram usage
This slipped through in PR #2327 and I noticed because the TechoBoard.h
for my variant doesn't include the Wire header, so the source file
in question does not coincidentally obtain a copy.
JakubandClaude Sonnet 4.6
Liam CottleandGitHub
Scott Powell
AI7NCandGitHub
agessaman
Huw DuddyandGitHub
Rastislav VysokyandGitHub
Stephen Waits
Quency-D
taco
Chris
entr0p1
jirogit
tuzzmaniandevil
Josiah VanderZee
Rococo88
Wessel Nieboer