Port the Wio Tracker L1 solo firmware (full on-device UI, dual BLE/USB
companion transport) to Heltec V3 and V4 OLED boards. Neither board has
a joystick or CardKB on-board, so each new env wires up both as optional
peripherals with default pins from what the board leaves free, gated
behind the existing UI_HAS_JOYSTICK/ENV_PIN_SDA+SCL flags.
DUAL_SERIAL was nRF52-only; added an ESP32 helpers/esp32/DualSerialInterface.h
counterpart so the flag isn't silently ignored on these boards. On V4's
native USB CDC, isClientConnected() also honours (bool)Serial (real DTR),
same as the nRF52 version; V3 has no native CDC so it stays BLE-only there.
Screen (SDA 17/SCL 18) and CardKB (SDA 3/SCL 4) confirmed working on real
V4 hardware.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Enable GPS time synchronization across all variants by passing
&rtc_clock to MicroNMEALocationProvider. When GPS gets a valid
fix, the RTC clock is now updated automatically every 30 minutes.
Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag,
lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1,
lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3,
promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.
GPS support via EnvironmentSensorManager. Connect GPS RX to pin 45, TX to pin 46.
Note that while you can disable using the GPS there is no way to power down the GPS without using a mosfet and adjusting PIN_GPS_EN.
* BasChatMesh: new onContactRequest(), for PAYLOAD_TYPE_REQ handling.
* companion, repeater and room_server: now with basic 'plumbing' to handle REQ_TYPE_GET_TELEMETRY_DATA (0x03).
* dependency: added CayenneLPP to libdeps
* all target.* modules now with a stub 'sensors' object.
JakubandClaude Sonnet 5
Scott Powell
OverkillFPVandGitHub
João Brázio
Wessel NieboerandWessel Nieboer
Wessel NieboerandWessel Nieboer
Scott Powell
taco
MemoandGitHub