Message history (DM + channel) now stacks bubbles upward from the compose
row instead of the header, so the newest message sits at the bottom like
a typical messenger, with older messages progressively above. UP/DOWN and
the scrollbar direction are swapped to match; the newest bubble now keeps
the same breathing-room gap against the compose row as it does against
another bubble, instead of touching it.
Keyboard: Shift is one-shot by default (capitalises just the next
letter, then reverts), with Hold-Enter on Shift toggling a persistent
caps-lock for the old sticky behavior. Hold-Enter on Backspace clears
the whole field in one action.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- GxEPDDisplay now uses the same single misc-fixed 6x9 font as the OLED
driver (Lemon retired there too), with baseline math updated for the
new ascent.
- Clock Tools' Alarm screen: Repeat and Armed now respond to LEFT/RIGHT
like every other multi-value/toggle field in Settings, not Enter-only;
Hour/Minute merged into one Time row edited with a hand-rolled HH:MM
digit cursor (like the Timer's), replacing the two-row DigitEditor
popups; Repeat's "Off" label now matches the codebase-wide ON/OFF
casing.
- Top status bar: battery icon now shares the same box height as the
other status icons (Bluetooth/mute/etc.) instead of standing 2px
taller, and its charge nub is properly vertically centred instead of
drifting off-centre at non-multiple-of-4 box heights.
- Small settings-gear icon glyph tweak; wio-tracker-l1 screenshot build
variant now enables DUAL_SERIAL.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replace the Lemon/default font-switch with a single misc-fixed 6x9 font
(full Latin/Greek/Cyrillic coverage), generated via a new tools/bdf2gfx.py
BDF-to-GFX converter. Removes the keyboard's per-render font-switch
workarounds now that one font fits its cell cleanly.
DiagnosticsScreen becomes a circular tab carousel (Live / System / Font),
adding a firmware+device+radio info tab and a per-alphabet rendering test
card covering every keyboard language.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
After soaking for a bit on the adverts without issue on multiple nodes,
I added more hardware crypto.
Supported nodes is unchanged in this PR addition, but if others can verify,
they can easily be added.
Some info on the CC310: https://docs.nordicsemi.com/r/bundle/ps_nrf9151/page/cryptocell.html
**Added:**
- AES-128 packet encryption/decryption now use hardware crypto
- HMAC-SHA-256 authentication now uses hardware crypto
- ACK hash computation and channel ID derivation now use hardware crypto
- RNG (random number generator) now uses hardware crypto rather than
radio noise + weak software RNG (which can have issues if there's
no surrounding radio noise.) NIST SP 800-90B certified.
- Runs hardware self-tests on startup
- Runs continuous health tests during operation
- Uses thermal noise/shot noise for randomness
**Unchanged:**
- calcSharedSecret remains software - it would be a split hw/sw solution
and added complexity for likely not a lot of gains. This only happens
when establishing a new contact, so not too frequent to be worth it.
- ed25519_create_keypair remains software. This is only called when a
node is first initialized. It does use the hardware RNG change, however,
so better randomization.
Tested on (so far):
- Heltec t096
Build test on:
- Heltec t096 companion ble
- t1000e companion ble
- RAK 4631 repeater
- RAK 3401 companion BLE
- Heltec v3 companion wifi
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Let me know when and how to demonstrate.
A device administering itself via the Admin tool read as awkward, so the
local mode is gone and its options relocated to Settings.
- AdminScreen is remote-only: drop the CHOOSER phase, _local_mode, the
LocalField/LocalKind model and activateLocalField/commitLocalField.
Phases collapse to LOGIN/COMMAND/REPLY, entered only via startFor().
- Tools > Admin opens straight to the Nodes picker (ACT_ADMIN ->
pickAdminTarget()). Backing out of a command screen returns to that
picker; the picker's Cancel returns to Tools. gotoAdminScreen() removed.
- Settings > System gains Name (keyboard-edited node_name) and Reboot
(action row, placed last so it isn't the default cursor). Radio + TX
power were already in Settings; Send advert is the home ADVERT page.
Docs: tools_screen.md Admin section rewritten remote-only; settings_screen.md
System table gains Name + Reboot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
fdlamotteandGitHub
JakubandClaude Sonnet 5
Quency-D
Scott Powell
Nick Dunklee
Liam CottleandGitHub
Quency-DandGitHub
Jaroslav Škarvada
Ryan Gregg
Huw DuddyandGitHub
Will Dillon